Problems with Lexicon Lambda Interface and Mac OS10.5

Hi everybody
I used my Audio interface Lexicon Lambda for a wile with 10.4 and it worked great. I updated now to 10.5.2 and since then I have buffer problems. I can change all the setting but it just change the time until it happen. Everything sound digital noise, a delay and so on.
For test reasons I went back to 10.4 and it worked fine, now I am back on 10.5 and still problems.
The answer from the Lexicon Pro Support was: "There are no firmware updates for the Lambda; however, there may be software updates for the Leopard OS that improve the performance of your audio application when using the Lambda hardware."
So any ideas, any persons with similar problems? Is it just me, but in my opinion this should be a Lexicon problem, am I wrong?
Thank you for all your answers.
Marco

Leopard is really a different OS. Lots of things have been changed in networking, security, core audio etc.
Changes often carry problems.
A 10.5.3 update is on the go but until then it's better if you remain with Tiger.
cheers
rob

Similar Messages

Problems with Mail after upgrading to MAC OS10 version 10.6.8

I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard. Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
'You can't use this version of Mail with this version of Mac OS X. You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html

Problem with HP Printer Utility and Mac OSX 10.5.4

I have a problem with HP printer Utility. When a standard user adds a new paper profile HP Printer Utility asks to type an administrator's name and password to allow HP printer Utility to make changes. Is it possible to avoid this? Otherwise I have to give admin rights to every user because they have to be able to add new papers. HP printer Utility sharing and permisssions are set to read and write to everyone.
HP designjet Z3200
MacOSX 10.5.4 (Mac pro intel)
HP printer utility 3.6.0.

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problems with garageband 5.1 and mac OS X 10.8.5

I have recently started experiencing major problems with garageband. I assume this is since my latest upgrade but I also now realise that I've been having problems for quite some time but its just got worse.
I can't seem to upload a new version of Garage band. I understand that I need to upgrade to ilife but I can't find it in the app store. Is this what I need to do? and if does anybody have a link to it?
I work as a VO artist and really need to sort this asap
I look forward to any hints/tips/ideas
Thanks in advance

Tonksy2 wrote:
I can't seem to upload download a new version of Garage band.
the latest version of GB is version 10, which requires Mac OS X 10.9.x (both are free), which leaves you with two options:
upgrade your system and get GBv10 (Apple no longer offers v6)
find boxed copy of iLife '11 which has GB v6 on ebay, or amazon (they have iLife '11 for $39)

Problem with exchange 2007 SP3 and mac mail app loading mails

Hi,
since a few days i am having a problem with mac's (using either the included mail app or outlooc 2011 for mac) syncing mails with my exchange server. both, mail and outlook) connect successfully to my excahnge 2007 sp3 rollup 14 server, but when
they start syncing mail they dont load any mails or only load the headers and keep saying loading (of body)
when i open the https://server/EWS/Exchange.asmx on the browser it asks for the user/pwd and lets me open the xml once, the next time it crashes.
in the eventlog i am getting the error that: a process for app-pool MSExchangeServicesAppPool couldnt respond to a ping. the event id is 5010.
all my microsoft outlook accounts, outlook web acces and the mail on mobile devices (iphone and android) work fine.
does anyone have an idea what could be the issue for this strange behavior?
thanks,
chris

Hi,
According to the error message, "a process for app-pool MSExchangeServicesAppPool couldnt respond to a ping. the event id is 5010", I find a related article for your reference:
Event ID 5010 — IIS Application Pool Availability
http://technet.microsoft.com/en-us/library/cc734991(v=WS.10).aspx
Please follow the article to check whether application pool has been started.
Additionally, I notice that you said "all my microsoft outlook accounts, outlook web acces and the mail on mobile devices (iphone and android) work fine.", please run following command to check whether parameter "EwsAllowMacOutlook"
value is True:
Get-CasMailbox | FL
If the parameter "EwsAllowMacOutlook" value is False, please set it to True via following command:
Set-CasMailbox -Identity FQDN -EwsAllowMacOutlook $True
If still not work, please contact MAC Support for help. For your convenience:
http://answers.microsoft.com/en-us/mac/forum/macoutlook?tab=Threads
Thanks
Mavis Huang
TechNet Community Support

Anyone having problems with AirPrint HP 5520 and Mac OSX 10.8.2

Hi guys,
I just bought my new Mini and my second HP Wireless printer.
For some reason it does not connect to any of my devices. I have installed all updates, added the printer many times to my network etc.
When I start my HP laptop is does work perfect to print wireless - but I am unable to find the printer with my iPhone, iPad or Mac Mini. Anyone having an idea what to do?
I also configured the printer on Mac OSx many times..
Regards!

You can check the Net log in the Web Console (Web Developer > Web Console;Ctrl+Shift+K) console to see if there are errors with retrieving files.
You need reload the web pages and bypass the cache to refresh possibly outdated or corrupted files from the server.
*Press and hold Shift and left-click the Reload button.
*Press "Command + Shift + R" (MAC)
See also:
*https://developer.mozilla.org/en/Tools/Web_Console

Problems with Epson R2400 printer and Mac

I'm a photographer and I switched to an imac a while ago. When I tried out my Epson R2400 printer, it worked really awful, comparing to when I used it with PC. I still haven't managed to fix these prolems. The printer menu is diminished (less options, many inaccessible in grey), there are problems with print density, with color adjustment, what I see on my screen is not what I get on my print (a black and white photo in grayscale mode can appear almost light blue when printed), there are even alignment problems (centred photos appear closer to the left edge of the paper). And I don't have a clue why all this is happening. The printer driver I installed is apparently the latest one. So I don't know where to go from here. I have installed and I use the profiles of the specific papers I'm using, but the results are NASTY. Please help.

By the way, I have read the links under "More like this", but those threads don't seem to clarify my question. Originally I had installed my Epson driver from the original (old) Epson CD. When that didn't work I uninstalled and installed the newer Epson driver from the Epson's site. Doesn't work and the problems I'm having are the ones I mentioned above.

Problems with SmartDisk Firelite 80gb and Mac Mini

I purchased a SmartDisk Firelite 80gb hard drive to use to dump documents/itunes library onto to free up room on my mini itself. Thing is I work in an MAC/XP enviroment and I would like to be able to go between the both with no problem. The thing is I don't want to use the FAT file system. I would like to use a more secure format. Thing is what is a format the both can read? .. and How can obtain this? I'm not sure if i can partition this particular drive, that is the problem.
Please help !!!!
-thank you .. brian

Hi Brian,
Welcome to Apple Discussions
I believe only FAT32 (MSDOS) are the only Mac OS X and XP compatible volume format. Yes, you can partition your hard drive; you should look at Partitioning a hard disk. You may want to look at Mac OSX Hints: Create HFS+ and FAT32 partitions on one external drive.. Your hard drive should be in FAT32 already, so you shouldn't have to reformat it.
Jon
Mac Mini 1.42Ghz, iPod (All), Airport (Graphite & Express), G4 1.33Ghz iBook, G4 iMac 1Ghz, G3 500Mhz, iBook iMac 233Mhz, eMate, Power Mac 5400 LC, PowerBook 540c, Macintosh 128K, Apple //e, Apple //, and some more... Mac OS X (10.4.5) Moto Razr, iLife '06, SmartDisk 160Gb, Apple BT Mouse, Sight..

Problems with HP LaserJet 1006 and Mac OSX 10.4.11

I successfully installed the HP drivers and printed out a document, signed off, and now the print queue goes to stopped without printing any of the queued jobs.
I've reset the print system, downloaded newer drivers from the HP site, but nothing seems to help at this point. I've included the error log below. Any help appreciated.
Running a Mac mini 1.83GHz Intel Core Duo with 2GB SDRAM, OSX 10.4.11, build 8S2167.
error_log:
+Description: Printer error log+
+Size: 128.77 KB+
+Last Modified: 2/24/08 8:57 PM+
+Location: /var/log/cups/error_log+
+Recent Contents: ...+
+I [24/Feb/2008:20:51:37 -0500] Adding start banner page "none" to job 1.+
+I [24/Feb/2008:20:51:37 -0500] Adding end banner page "none" to job 1.+
+I [24/Feb/2008:20:51:37 -0500] Job 1 queued on 'HPLaserJetP1006' by 'jjcllhn'.+
+I [24/Feb/2008:20:51:37 -0500] Started filter /System/Library/Printers/Libraries/PrintJobMgr/Contents/MacOS/PrintJobMgr (PID 3320) for job 1.+
+E [24/Feb/2008:20:51:37 -0500] PID 3320 crashed on signal 6!+
+I [24/Feb/2008:20:51:37 -0500] Hint: Try setting the LogLevel to "debug" to find out more.+
+I [24/Feb/2008:20:51:37 -0500] Saving printers.conf...+

Just found an email HP Support sent to me back in January 2008, about this issue
"Hello Hunter,
Thank you for contacting HP Total Care.
There currently is not proper driver for 10.5, so it is surprising that the printer is printing correctly on your Mac from any application.
Your issue cannot be resolved until the 10.5 driver is developed and released.
To sign up for an update as soon as it is available ...click on the link below:
HP's subscriber's choice is a free service where you can select to receive timely email notifications ranging from software and driver updates to creative ways to do more with your HP products.
http://h71036.www7.hp.com/hho/html/3618-0-0-225-121.html
If you need further assistance, please reply to this message and we will be happy to assist you further.
You may receive an e-mail survey regarding your e-mail support experience. We would appreciate your feedback.
For information on keeping your HP and Compaq products up and running, please visit our Web site
at:
http://www.hp.com/go/totalcare
Sincerely,
Dave
HP Total Care"
I just sent them an email today on any updates regarding a release date on the Leopard driver for P1005, i'll post any info i receive.

Problem with Spry Tabbed Panels and Mac Safari

On a site I'm working on I have implemented Spry Tabbed
Panels. Everything was great until my boss looked at it on his Mac
Safari. Spry doesn't seem to honor the 100% width, and cuts it off.
I have looked at the CSS and don't see what is holding it up.
Here is
a link to a screenshot.
The CSS that defines the width is attached.
Can anyone help? Thanks!

Wow, so I am the only one that has ever used Spry that
doesn't work in Safari? I find that hard to believe.
So let me twist this another way. Does anyone know why a div
does not stretch 100% of it's parent in Safari?

Hi. I am trying to record a video on my iPad 2 but hoping to use an external condenser microphone via my Lexicon Lambda interface. Is this possible, and if so, how?

Trying to record a video on the default iPad 2 video app, but not using the iPad 2 internal microphone. I would like to use an external condenser microphone via my Lexicon Lambda interface. Is this possible?

Try a restart.
If that doesn't fix the problem, shut down the computer and then power it back up. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application unistaller. For each disable/delete, you will need to restart if you don't do them all at once.
Safe Mode
Safe Mode - About
General information.
Isolating issues in Mac OS X
Troubleshooting Permission Issues
Step by Step to Fix Your Mac

HT200169 Having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Sug

Hello,having a problem with Logic 9 on a Mac Pro.Working on a lenghty song and apparently session got corrupted.Doesnt let me export tracks,program crashes.Already tried start brand new session with the tracks imported into it but still wont export.Suggestions?

Thanks, Ian. Yeah, that's how I do it now...or with the controls in the left side pane. Still, I would have liked that quick on-the-spot edit capability...especially while sketching.
Ian Turner wrote:
Sorry Mark, you are out of luck as it does not do that - it works the same as L8. The way I would achieve that with more accuracy and control would be to route all the tracks you want to fade to a Bus then use volume automation on the bus. To do this you will need to add a standard audio track, then re-assign it using (Control Click on the track header) to the Bus track. You can then automate volume/plugins etc on the Bus track.
Ian

IPhone 4 version 5.0 has sync problems with iTunes 10.5 on Mac OsX 10.6.8

Hi there,
I have Mac OsX 10.6.8, iTunes 10.5 and iPhone 4 version 5.0; all up to date.
When I try to sync my phone with iTunes, the sync goes well until the apps start to sync .... then iTunes closes and I get varying error reports.
I have tried updating everything (Mac, iTunes, iPhone) to no avail.
I tried restoring the iPhone, that didn't help whatsoever.
Does anyone have a solution? I am now tempted to downgrade to an earlier version of iTunes (ie: 10.4.3) as some people suggest in different posts.
Thank you for your time in replying!
Marmotte

There is definitely a problem with iTunes 10.5 and iOS 5.0 syncing correctly. I've seen lots of workarounds on the forums here. Just search for it and see if you can come up with something that works.

Problems with Java AQ interface migrating 9i to 10g

Hi!
I've got problems with Java AQ Interface migrating from 9i DB, JDBC, AQ to 10g rel.2 DB, JDBC, AQ
First, i started to occasionally receive NullPointerException in Oracle JDBC 9.2.0.8
java.lang.NullPointerException
at oracle.jdbc.driver.OracleStatement.describe(OracleStatement.java:6439)
at oracle.jdbc.driver.OracleStatement.get_column_index(OracleStatement.java:6203)
at oracle.jdbc.driver.OracleResultSetImpl.findColumn(OracleResultSetImpl.java:1557)
at oracle.jdbc.driver.OracleResultSet.getString(OracleResultSet.java:1543)
at gpnic.messaging.LDAPMessenger.messageFromRS(Unknown Source)
We were using 9.2.0.8 JDBC and 9i and 10g databases.
We decided to go up for 10g r2 JDBC Drivers, and 10.2 AQ but started to get the following errors:
oracle.AQ.AQOracleSQLException: ORA-25216: invalid recipient, either NAME or ADDRESS must be specified
ORA-06512: на "SYS.DBMS_AQIN", line 454
ORA-06512: на line 1
     at oracle.AQ.AQOracleQueue.enqueue(AQOracleQueue.java:1267)
     at gpnic.comm.messaging.transport.AQTransportAdapter$AQDestanation.send(AQTransportAdapter.java:607)
     at gpnic.comm.messaging.transport.OutboundThread.run(OutboundThread.java:83)
I'm specifying address of an agent, but oracle says I am not.
I tried both native AQ and JMS interfaces, bot got the same error. I specify recipient the following way:
'consumer' var contains name of AQ agent and is not null
native AQ interface:
aqSess = AQDriverManager.createAQSession(db_conn);
AQQueue destQ = aqSess.getQueue(schema, queue);
dequeueOptionsOut = new AQDequeueOption();
dequeueOptionsOut.setWaitTime(AQDequeueOption.WAIT_NONE);
dequeueOptionsOut.setConsumerName(consumer);
dequeueOptionsOut.setDequeueMode(AQDequeueOption.DEQUEUE_REMOVE);
dequeueOptionsOut.setNavigationMode(AQDequeueOption.NAVIGATION_FIRST_MESSAGE);
AQMessageProperty mpOut = new AQMessageProperty();
Vector vRecpt = new Vector();
vRecpt.add(new AQAgent(consumer, null, 0));
mpOut.setRecipientList(vRecpt);
AQMessage aqMsg = null;
AQEnqueueOption eOpt = null;
//prepare message
aqMsg = destQ.createMessage();
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AQObjectPayload payload = aqMsg.getObjectPayload();
payload.setPayloadData(oraMsg);
//setting properties
aqMsg.setMessageProperty(mpOut);
//do enqueueOut
eOpt = new AQEnqueueOption();
destQ.enqueue(eOpt, aqMsg); //<- here AQOracleSQLException is thrown
JMS interface to Oracle AQ:
TopicSession session;
TopicConnection connection;
TopicPublisher publisher;
AQjmsAgent[] recipientList;
connection = AQjmsTopicConnectionFactory.createTopicConnection(db_conn);
     session = connection.createTopicSession(true, Session.CLIENT_ACKNOWLEDGE);
     connection.start();
     Topic topic = ((AQjmsSession) session).getTopic(schema, queue);
     publisher = session.createPublisher(topic);
     recipientList = new AQjmsAgent[1];
     recipientList[0] = new AQjmsAgent(consumer, null);
CLOB chMsg = CLOB.createTemporary(db_conn, true, CLOB.DURATION_SESSION);
chMsg.open(CLOB.MODE_READWRITE);
chMsg.putString(1,msg);
//creating oracle type message
gpnic.db.SDSTypes.SdsMsgT oraMsg = new gpnic.db.SDSTypes.SdsMsgT(chMsg);
AdtMessage adtMessage = ((AQjmsSession)session).createAdtMessage();
adtMessage.setAdtPayload(oraMsg);
((AQjmsTopicPublisher) publisher).publish(adtMessage, recipientList); <- here Exception is thrown
We tried the following combinations
9i DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 9i jdbc, 9i aq - enqueue ok
10g DB, 10g jdbc, 10g aq - exception is thrown
Can anyone help?

Duplicate post, please check Upgrade 9i to 10g

Hi Guys, I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader, What is the problem here so I can get Pictures onto my Computer. ,

Hi Guys,
I have a problem with Importing Pictures onto my Mac mini with Lion installed by using a Card Reader,
What is the problem here so I can get Pictures onto my Computer. ,

Hi Noob Søren
There are a few things that are confusing in your question.
As far as I know, you dont have to install Time Machine on this OS as it is already installed for you. You only need to connect a hard drive to your computer via firewire or usb, click on the Time Machine icon, Open Time Machine Preference in the drop down menu and select a disk: your connected hard drive.
You can of course reformat this connected device, partition it into a few volumes to organise data if you so wish.
I find it strange that your mac's hard drive is divided into two volumes... perhaps this was created through bootcamp?
You can access the configuration of your hd through Applications/Utilities/Disk Utilities.
Clicking on one of the icons on the right hand panel will bring the details of the contents of your hardDrive and volumes. From there you can decide to erase a partition, reformat etc....
If your hd contains more than one volume, and one of them is empty, you could decide to remove it. Back up all your important data before doing so.
Hope this helps
WN

Problems with Lexicon Lambda Interface and Mac OS10.5

Similar Messages

Maybe you are looking for