Problems with libjpeg and libpng after upgrade

Hi everyone,
I recently did a full system upgrade and now a great amount of programs requiring the old versions of libjpeg (libjpeg.so.7) and libpng (libpng.so.12) do not launch. Currently installed are 8.2 for libjpeg and 1.4 for libpng. I did ldconfig, checked on several mirrors, my mirror and system are up to date. Did pacman -Syu each time. I read the archnews of Jan 31st, if I remember well, saying the rebuilds for new versions of these two libs were done and moving from testing to core. My mirrors were updated less than 24 hours ago. I simply cannot use most common packages such as emacs, vim, xulrunner for firefox, and so on...
I use only packages from the repos (no AUR) and a few home-compiled softs.
Did I miss something ? I've been using Arch since october '09 and this never happened. Should I downgrade to the older versions of these libs ?
Please Help.
Regards.

Hey dude, I'm having a lot of torubles from my last upgrade too!
I installed libpng12 and libjpeg7 from AUR. Also I uninstalled cairo-lcd from AUR and then reinstalled the original extra/cairo package. That solve some things, but I'm still unable to run Docky and Nautilus doesn't show SVG icons.
Look at my post: http://bbs.archlinux.org/viewtopic.php?id=91278
Good luck!

Similar Messages

  • Problems with Siri and Mail after upgrading

    Siri will no longer do text command phones random people instead.
    My yahoo mail after fetching shows updated days before and shows
    Unread mail but won't show them logging into yahoo I have no unread mail??

    Thanks for the quick response...I did try all 3 of those, still having the same problem.  Just did the reset now, and still happening.

  • Problems with iTunes and Podcasts after upgrade to iOS 8.1.3.

    I upgraded my iPhone 5 to iOS 8.1.3, then I purchased some music on iTunes.
    While hearing the music, incomming call shut the Music player down. From that time on, cannot open neither Music, nor iTunes Store, Podcasts, Settings/General/About, (Nike) Running, ...
    Does not solve the issue: Restart iphone, restore from the back-up 
    Advice appreciated

    Hello, ik31.  
    Thank you for visiting Apple Support Communities.  
    Here is an article that I would recommend going through when experiencing this issue.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • Problems with your HP printer after upgrading to Windows 8.1

    If you are experiencing problems with your HP printer after upgrading to Windows 8.1 please click on the below link and install the HP Print and Scan Doctor and run the utility to fix the issue.
    www.hp.com/go/tools.
    I was an HP employee
    If I have helped you solve your issue please mark it as solved
    **Say Thanks By Clicking on the Kudos Star**

    Hi.....my laserjet 1536dnf mfp was working perfectly with win 8 pro....then I installed win 8.1 pro and now the computer ,which is part of a network,can not communicate with the scanner of the printer--it prints just fine. On another computer (running win 7 ) on the same network, the scanner and all other printer functions  work just fine.
          I have tried installing the latest drivers from HP......scanner still not "communicating" with computer.....also temporarily disabled firewall.....please help...all the best -David G (gossat)

  • Strange problem with my ipod 2g after upgrade to os 4.2

    Strange problem with my ipod 2g after upgrade to os 4.2
    the problem with volume some times when i switch on the ipod i hear the sound
    alarm rings it's work too i can hear it .. but the problem i cant hear anything else as yourtube or music i cant hear buttons sound when i typing
    i hope i get help

    I would try in order:
    - Reset the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restore the iPod from backu via iTunes.
    - Restore the iPod to factory defaults/new iPod.

  • Problem with Rescue and Recovery after installing Norton Internet Security 2010

    Hi all.
    It's my first time in this forum.
    I have a problem, with Rescue and Recovery, after installing Norton Internet Security 2010 on my T43.
    The message I get it:
    "Rescue and Recovery is unable to back up the file 'C:\Documents and settings\all Users\Application Data\ Norton\ 00000082\00000109\000003c1\cltMLS1.bat' Because the file is either corrupted or being used by another application. Please close any application that could be using the file.
    I tried to close the Norton but I couldn't find how.
    Tanks
    Doron71

    Hi and welcome to the forum,
    the reason for this situation is, that the antivir files are protected from being modified.
    This is the reason, why this file cannot be backed up. I assume, that you would get much more such messages, as there are surelly multiple files files, that are protected like this.
    So the solution is to block folders from being archived. Please start RnR application and in the configuration set this folder as the excluded one.
    This will skip the backup of this file and will fix your situation.
    Please let me know, if you have covered this.
    Cheers

  • Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Problem with Facebook and instagram after istalling iOS 7.1. Can not open them!

    Hi Hanjon!
    Here is an article that will help you troubleshoot these purchased apps:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Problems with set up disc after upgrading hard drive

    I am having problems starting up my Macbook after upgrading the hard drive from 80GB to 160GB.  The new hd is SATA, a WDScorpio.  The pins on the end look the same, and I've had no problem with the physical install.  When I go to start up the Macbook, I get a gray screen and the "flashing manila file w/a question mark" icon.  I load the disc while holding down the "C" key, and all that happens is the disc gets ejected.  What am I doing wrong?  I also have my hd backed up w/time machine in an external hd.  Any ideas?

    Turns out, my problem is a malfunctioning optical drive. My Macbook couldn't read the set up disc. This is the second time in a week that I have had this Macbook into the apple store for warranty repair work. Last week, It was a defective VGcable. Each trip to the Applestore is 115 miles round trip from where I live. I tried to get Apple to give me a new computer, but no dice. I even had a district manager in Boise Idaho hang up on me. It's too bad when they know they have a product which everyone loves, and wants to use. They can set the terms. How many things must go wrong before they just replace the @#$# thing? I bought the Macbook Feb 12th, so it's not that old. I have handled it with the utmost care. Anyway, I've tasted the forbidden fruit, and will continue to use Apple products. Thanks for your help. I'll probably have a much easier time with a computer that works. (knock on wood)

  • Problems with email and SMS after 1.3.5

    Let me first say that I love the Pre. Up until this point it has been perfect - I have a replacement, but that is because I dropped it (wrong angle, wrong location, broken screen). However, following the 1.3.5 update I'm now having a fairly important problem with email and sms - I can receive email and messages, but not send them.
    I have two email accounts. My personal account is with earthlink. My work account goes through an ISP using the domain name of my employer. I'm not using Microsoft Exchange or Outlook. I have tried deleting and reentering the accounts and that did not work. I can receive messages but get error messages when I try to send. 
    The same for messaging. I don't use it very often. But yesterday I get a text message  and tried to respond and got the error message.
    I power the phone off every night because I have a landline and use that as the primary phone at home.
    I have been looking around message boards trying to find a fix for this.  Has anyone had this issue and resolved it?
    Thank you.
    Post relates to: Pre p100eww (Sprint)
    Message Edited by starburst42 on 01-05-2010 07:06 AM
    This question was solved.
    View Solution.

    I forgot to add that this is a stock Pre. There are no patches or homebrew apps. 
    Edit:
    I found a fix for the email problem, in posts on precentral and this board from a few months ago. The info came up in a Google search, and not searches of the boards, which is kind of frustrating.  Here is the info, and the link.  I really wish Palm would put info about this work around on their site, or at least make it easy for people to find.  The solution is the last message in the thread linked below:
    Had the same problem.  Checked with Earthlink - no help.  Checked with Sprint - no help.  Checked with Palm - no help.  Here is what finally worked:
    Delete the earthlink account and start over.  When you do - this is the key - set up the account manually!  If you use the Pre defaults and try to change the settings it will not correct the problem. Your settings for outgoing mail must be:
    "smtpauth.earthlink.net"
    Use Authentication set to "on"
    username is your email address
    your email password
    port set to "587"
    encryption "none"
    Again, the key is to set up manually.
    smtp email fix
    Message Edited by starburst42 on 01-06-2010 12:08 PM
    Message Edited by starburst42 on 01-06-2010 12:09 PM

  • Anyone having a problem with links in Safari after upgrading?

    okay,  Before the upgrade to os5, we were able to go to the website to get  the e-edition of our local paper.  The way their website is designed you first see part of the first page and then there is a link to take you to the full page.   Everything worked just fine.  Then after the upgrade, last Saturday, i am able to get the first part of the page, but when I click on the link to access the full page it goes to a blank page -about:blank.  I do have safari on my laptop (an ibm) and the link works fine there.  Is it a problem with Safari, the settings on my ipad or what?  Please help?

    Is your problem with iMovie as the title suggests or with iDVD?

  • Problems with my second monitor after upgrading to Mountain Lion

    Basically I have a Mac Pro 8-core with two video boards (2 x NVIDIA GeForce GT 120 512 MB) connected to two monitors. After upgrading to the Lion Mountain, 90% of the time when I start my MAC the second monitor doesn't show it image, keeps in full black screen, what puzzle me is, I can see the mouse arrow on it, so its alive, but its in black, than I have to restart the computer over and over again until it finally make the second shows it contains.
    Have anyone experienced the same problem?!

    Hello Carlo!
    Sorry but I don't understand which part of my question is not clear. I've been to the Apple Store, they asked me to bring my 20kg Mac Pro and both 24" inches Eizo monitors to central London to have it checked. Well, honestly, this is impossible, is an invitation for an accident.
    Is just unbeliavable that no one has experienced my problem, looks like I am the only one person with two monitors using the Lion Mountain.

  • Problems with your internet connection after upgrading to iOS 7.1.2

    After upgrading to iOS 7.1.2 on my iPad Retina display does not connect to the internet more. Recognizes the Wi-Fi network but can not connect to the internet. The same thing happened to my wife's iPhone 5s, while my had no problems ...

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at
    http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.hmL
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Signal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Problems with wireless mouse/keyboard after upgrade to snow leopard

    Hi!
    I am wondering if someone has some insight for me.  I recently upgraded to Snow Leopard from Tiger. I have been using a Logitech S 530 wireless keyboard/mouse combo for a few years.  I am now having problems with them irratically.
    1. When on line and the page is large, I often cannot move the blue bar at the bottom of the screen to scroll to the right. What happens is like a stutter; as I am dragging the bar, it and the page shake rapidly side-to-side. Sometimes, I can drag it to the right, but as soon as I let go, it snaps back to the left.  This does not happen in Word.
    2. When in boxes with dropdown options, only occasionally does that happen.  The dropdown either doesn't show, or it flashes quickly.  Sometimes it will work after clicking many times. This happens with dropdown menus as well as search boxes that have dropdown choices for previous searches or suggested searches a la Google.
    3. When I use my function key or mouse to display all windows, I can't choose the one I want.  Regardless of which one I put my cursor over, only the left-most one is highlighted and comes to the front when I click.
    4. There is a varying lag. Sometimes the system is responsive, and other times there is a lag of varying lengths before the system responds to the mouse action (click, drag, zoom, etc.)
    5. For a while, my left mouse button wouldn't work.  I reconfigured it, that seems to have done the trick.
    6. Today, I can't open any of the menu items on Firefox.  I can move the cursor there, but when I click on any of them, nothing happens. This is okay in Safari.
    I have disconnected and reconnected the usb, restarted the computer, and tried to reinstall the software for the mouse and keybord. When I did that, I got a message saying it couldn't install on the current OS, so I went to Logitech and dowloaded and installed the latest version (which indicated it is for OS X 10.6.8.)
    I don't know if this is a Snow Leopard problem, but it started sometime after I upgraded.  Thanks in advance for any help!
    Donna

    Update all your third party software  or uninstall and reinstall 10.6 versions.
    If your going to 10.7, be warned a lot of software will not work at all and your 10.5 era machine will be slow, perhaps even have problems as 10.7 is problematic on older hardware.
    http://roaringapps.com/apps:table
    IMO save for a new 10.8 machine after this summer.
    See #1-15 here, tune yourself up good.
     Step by Step to fix your Mac

  • [Solved] Problem with xf86-video-intel after upgrade to xorg 1.16

    Hi everyone,
    since the upgrade to xorg-server 1.16 i can't get X to work again on my thinkpad R50e with an old intel integrated chip (Intel Extreme Graphics 2).
    I first encountered the error "cannot open /dev/tty0": http://okraits.de/upload/xorg/Xorg.0.log
    Then i created /etc/X11/Xwrapper.config: http://okraits.de/upload/xorg/Xwrapper.config
    Then i got the error "failed to set mode": http://okraits.de/upload/xorg/Xorg.1.log
    My xorg.conf looks like this: http://okraits.de/upload/xorg/xorg.conf
    I start X with startx and this .xinitrc: http://okraits.de/upload/xorg/.xinitrc
    I have no clue how to fix this. Any help would be much appreciated!
    Greetings,
    Oliver
    Last edited by okraits (2014-08-08 06:33:09)

    lolilolicon wrote:
    How do you start X? Note you must start X from the same VT where you login, if you use Xorg.bin (no setuid). From your log there're mentions of /dev/tty0 and "Using VT number 2", so I suppose that might be the problem.
    If you simply use `startx`, the actual process running will be something like
    /usr/bin/Xorg.bin -nolisten tcp :0 -auth /tmp/serverauth.XXXXXXXXXX vt1
    Note the `vt1` in the line must be specified, where 1 is the value of $XDG_VTNR in the VT where you login.
    Edit
    In my log there's something yours are missing
    [ 45.465] (++) using VT number 1
    [ 45.465] (--) controlling tty is VT number 1, auto-enabling KeepTty
    I login at tty1 (which is the first one visible after boot) and run startx from there.
    I added the following to my .xinitrc:
    echo "vt: $XDG_VTNR"
    The output was:
    vt: 1
    That would be ok, right? Or is it $XDG_VTNR + 1?
    So i am wondering what is forcing X to use vt 2. Or how i can tell X to use vt 1.
    Last edited by okraits (2014-08-07 12:37:17)

  • Problems with TV Out signal after upgrading to iOS 5.1

    Has anyone experienced problems with TV Out signals on their iPad 2 using the Apple HDMI Adapter after upgrading to iOS 5.1?  I am trying to connect to my HDTV after upgrading and cintunally receive an "Unsupported Video Signal" message with a blank/back screen.  Prior to upgrading, I had no connection problems and could view TV Shows, Movies, Music Videos, Keynote, etc...without problems.  I've been unable to find any resolution to this problem, even followed Apple guidance to detach and reattach the HDMI adapter without success.  Seems like a software bug to me and it's a major problem when trying to conduct business or personal activities.  Hopeing Apple has a fix in work already...anyone else have any ideas?  Thx in advance...

    Try a reset. Press & hold the Power and Home buttons together for 10+ seconds, ignoring the red power-off slider, until you see the Apple logo. It is safe to do, there should be no content loss. It is the same as rebooting your computer.
    If that does not work, restore the iPad to the factory settings.

Maybe you are looking for