Problems with libraries and plugins - non admin account

I''ve got a couple of problems with a fresh install of photoshop on my windows Windows 7 64 bits system.
1. Libraries panel does not work. It displays the following error and interaction is not possible:
2. 3rd party plugins would load their content.
3. In the Creative Cloud Application the apps tab would load and displays the "download error" message:
The funny thing is that all the above errors don't occur on the loacl admin account. So I think this might be a permission problem. I think the most easy sollution would be to work under the admin account, but sadly that's no option (company policy). I am able to extent the rights of the useraccount I work on, but I don't know in wich folders the software needs write permissions. The both Adobe folders in program files and program files (x86) I already changed to full acces for all users. Can someone please help me?

Problems with libraries and plugins - non admin account https://forums.adobe.com/people/pippyn%20stortelder
This is a permissions Error. The other accounts on the computer do have permissions to use / change the administrator settings of these particular items.
There are two ways you can fix this. 1.) contact the admin of the system and let him know your accounts need read access to these items
My Preferred method is:
If you are on a Windows Account, then you can choose those items to run in Administrator mode for all people. ( win7,64bit )
Right click the infinity system for creative cloud (creative cloud icon - you would normally click to start the program. (not the one in your service tray, but the one in your menu area with the square red on it.
choose/click on properties
choose/click compatibility (tab at the top of the window)
Last boxed option on this screen is: Run Program As Administrator, Click that check box.
Click on Change Settings for All Users
in the window that comes up again choose, put an X in the box- the last option, Run Program As Administrator - Click Apply
Click OK
Click OK and the opened preferences window should now be closed.
You should be able to simply invoke the Cloud app now. But you might want to reboot to safe.
Depending on the installation methods used for your add-ons, you may have to perform this same process for all add-ins. I believe that would depend on which account, first installed the add-on and what level of permissions they have.
Good Luck
~elaine.

Similar Messages

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, a

I'm having problems with FlashPlayerPlugin and plugin-container. They keep starting up and bogging down the system. This has been a recent occurrance. I've made sure that I have the latest version. I notice the problem when I am opening some applicatio, and it freezes. If I go to Task Manager, I can see the two Adobe apps sucking up CPU cycles. If I end the processes, then the other apps continue. Today, I uninstalled FlashPlayerPluginqand plugin-container. All day since I have had no freezing of an app. What should I do to correct the problem?

Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those.

Problems with Intermedia and Plugin for RealNetworks

I installed plugin v2.1 in a Windows 32-bit system.
Database is 10.1.x, and Helix Universal Server 10.
I also followed the instructions for the demo, but the
plugin doesn't work.
At first it couldn't connect to the database, now it can (with the system schema). The problem is that it displays a weird message when i execute the the get_video procedure:
logplin(2540): Oracle Plug-in Error: failed to execute database statement
logplin(2540): Oracle Plug-in Error: ORA-01008: not all variables bound
Or when i do the sql alternative it displays:
logplin(204): Oracle Plug-in Error: failed to prepare database statement
logplin(204): Oracle Plug-in Error: ORA-00931: missing identifier
logplin(204): 7: Error retrieving URL `oracle/2' (Invalid path)
Does anyone knows how to fix this?
Thanks
Cesar Guerra

i've some problem with streaming video data from oracle using realserver.
i'm using oracle9i intermedia (9.2.0.1.0) and
Oracle interMedia Plug-in 2.1 for RealNetworks Streaming Servers and also universal helix server 9.0.8.1427. (my helix server http port is 88)
i've some procedure PL/SQL :
------------------------------procedure PL/SQL-----------------------
create or replace procedure get_video(
     video_id in varchar2,
     mimetype out varchar2,
     data out blob) as
     tempBLOB BLOB;
     s varchar2(200);
begin
-- Deliver audio and mimetype
select t.video.getcontent(), t.video.getmimetype()
into tempBLOB, s
from movies t where t.item_id = video_id;
data := tempBLOB;
mimetype := s;
end;
------------------------ end of procedure PL/SQL-------------------------------
-------------------------------mountpoint ------------------------------------
<List Name="Oracle DB RealVideo movie">
<Var ShortName="pn-oracle"/>
<Var MountPoint="/dbvideo/"/>
<Var Database="oracleSID"/>
<Var Username="scott"/>
<Var Password="tiger"/>
<Var SQL="get_video"/>
<Var Authentication="0"/>
</List>
------------------------------ end of mountpoint------------------------------
the URL i used was : rtsp://host:554/dbvideo/1
and an error occured: "unable to locate server. This server dose not have a DNS entry. Please check the server name in the URL and try again."
then i changed the mount point with :
------------------------------new mountpoint---------------------------
<List Name="Oracle DB RealVideo movie">
<Var ShortName="pn-oracle"/>
<Var MountPoint="/dbvideo/"/>
<Var Database="(DESCRIPTION=(ADDRESS=(PROTOCOL=TCP)(PORT=1521)(HOST=127.0.0.1))(CONNECT_DATA=(SID=oracleSID)))"/>
<Var Username="scott"/>
<Var Password="tiger"/>
<Var SQL="get_video"/>
<Var Authentication="0"/>
</List>
-----------------------------end of new mount point------------------------------
the i used different URL : http://127.0.0.1:88/ramgen/dbvideo/1
another error occured : "requested file not found. the link you followed may be outdated or inaccurate."
can anyone help me?

Problem with Audio MIDI Setup using multiple accounts

I'm having a problem with Audio MIDI Setup recognizing all of the MIDI devices on a G4 Tower with a non-administrator account. The main administrator account has no problem seeing anything, but the non-admin account won't see anything. Does it all have to be added in manually, or is there a preferences file to copy over that will take care of this. Failing that, is it a problem with file permissions? Any help would be greatly appreciated.

Don't know whether this of any help, but there's an identifiable issue with AMS and Digital Performer 5 where DP5 simply won't load with AMS setups configured with previous versions of DP. Which is probably irrelevant to your problem, but ...
What I and other DP users have found we have to do is start with a completely new, blank AMS setup, and reconfigure our devices from scratch, and although this was kind of hit and miss and on the fly (don't really understand what the the issue was, exactly), I think the bottom line was if we used the new AMS setup with DP5 before anything else that might cause its data tables to change, we were ok.
So if you can do it, it might be worth setting AMS to a new blank template, then connecting your interfaces, see how far you get. And always make sure you've got the latest drivers of course, though I'm sure you've done that.
Never used Mbox or 410, but I've an Ozonic which I think uses the same M-Audio firewire drivers as the 410, and don't have any problem with that, FWIW.
G5 Dual 2.7, MacMini, iMac 700; P4/XP Desk & Lap. Mac OS X (10.4.8) mLan:01x/i88x; DP 5.1, Cubase SX3, NI Komplete, Melodyne.

Possible conflict with iTunes 7 and non-admin account

I've tried burning cd's in my usual windows account (limited) and it comes up with the error message "disc burner or software not found", but when I log into my admin account and try and burn an mp3 then it burns just fine. I wonder if they changed the way version 7 burns cd's...
Any solutuions or fixes?

I'm not really looking for a way to roll it back. I was just hoping to find a fix for the current version, or make them aware that there is a problem with running it in a non-admin account.
Thanks for the info though!

Apple Remote won't work with Non-admin account :-(

Hi all,
i have a Macbook (OS version 10.5.4). Earlier there was only one account on this laptop, and i was using it as an administrator. A few days ago i decided to convert that account to a regular (non-admin) one, and created a separate admin-only account. When i tried using my Apple Remote in the non-admin account, it wouldn't work at all ! So i tried it in the admin account, and i was able to use it and paired it with this macbook.
But on logging back into the regular account, it has stopped working again (even though System Preferences>Security says the macbook is paired with a remote). Please help!! It would be especially helpful if this could be fixed without having to create & migrate to a whole new account, etc... i'm open to command-line solutions [ that won't crash the machine ]
Thanks a million !
..meghana

Never mind. i logged out of the non-admin account and into the admin account, unpaired and re-paired the remote. Then logged back into the non-admin account, and voilà! Its magic i tell you! hope this helps any other people who have the same problem.

System PATH environment variable issue when user log off and log in or switch from admin to non-admin account

Hi,
Problem Description:
After installing my new product version, when user does log-off and log in again into admin account
or switch from admin account to non-admin account, PATH environment variable shows incorrect path of my product (previous product version’s path) using command prompt.
It seems windows refresh issue during session changes (log off and log in / switch from Admin to
Non-admin account).
Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
Please see my thread for more details http://social.msdn.microsoft.com/Forums/vstudio/en-US/445ab42c-bdff-405a-8d53-558e1b6c7d34/path-environment-variable-issue-when-user-logoff-and-login-or-switch-from-admin-to-nonadmin?forum=windowsgeneraldevelopmentissues
Also submitted bug for this in connect.microsoft.com portal.In that it has lots of information
like problem statement, Reproduction steps and Expected Results.
Bug ID: 871782
Could you please any body help me for this?. your support will be appreciated.
Thanks,
Marichamy

Why PATH environment variable is not refresh immediately after log off and log in again or Switch
from admin to non-admin mode?.
I wouldn't have any expectation of what you are doing to work the way you expect. E.g. why is the %ABC% being replaced at all? There is some help about this ambiguous scenario in the cmd help...
/V:ON Enable delayed environment variable expansion using ! as the
delimiter. For example, /V:ON would allow !var! to expand the
variable var at execution time. The var syntax expands variables
at input time, which is quite a different thing when inside of a FOR
loop.
/V:OFF Disable delayed environment expansion.
So, what's the setting for the /V: switch that your users would be using? Perhaps you should be using the ! instead of the % for your ABC variable?
Oh. There's more below where I found that...
Delayed environment variable expansion is NOT enabled by default. You
can enable or disable delayed environment variable expansion for a
particular invocation of CMD.EXE with the /V:ON or /V:OFF switch. You
can enable or disable delayed expansion for all invocations of CMD.EXE on a
machine and/or user logon session by setting either or both of the
following REG_DWORD values in the registry using REGEDIT.EXE:
HKEY_LOCAL_MACHINE\Software\Microsoft\Command Processor\DelayedExpansion
and/or
HKEY_CURRENT_USER\Software\Microsoft\Command Processor\DelayedExpansion
to either 0x1 or 0x0. The user specific setting takes precedence over
the machine setting. The command line switches take precedence over the
registry settings.
In a batch file the SETLOCAL ENABLEDELAYEDEXPANSION or DISABLEDELAYEDEXPANSION
arguments takes precedence over the /V:ON or /V:OFF switch. See SETLOCAL /?
for details.
If delayed environment variable expansion is enabled, then the exclamation
character can be used to substitute the value of an environment variable
at execution time.
So, I guess the essence of your "bug" will boil down to whether you
need the feature to get the result you want and the
truth of that first sentence but it certainly looks like a "can of worms" to me. ; )
HTH
Robert Aldwinckle

Screen sharing to OS X Lion Server with non-admin account

I have set up a Lion Server with one admin (in addition to the root user) and several non-admin normal accounts. In Server.app, I have enabled remote login with ssh, and remote management via screen sharing. I am unable to use Screen Sharing to connect to the server from the non-admin accounts, but able to use the admin account. I've read that it is only enabled for admin users, but need to access from non-admin accounts, and I can't add these accounts to the admin group. Is there a way to do this with Workgroup Manager? I tried changing the Remote Management settings in System Preferences by adding the non-admin, but when selecting 'Observe' and 'Control' in the options for the user, they are not saved.

I resolved this issue by deselecting the "Enable screen sharing and remote management" in Server.app and going to System Preferences, Sharing Preferences, Screen Sharing, and allowing access for "All Users". If you have some users you want to allow VNC, you can create a group, add the allowed users to the group, and add the group under "Only these users".

How to run admin tasks with non-admin account ?

Hello,
The title says it all: I want to allow some non-administrative accounts to run admin tasks which must be run as root.
A solution would be to use 'sudo' and give rights to those non-admin accounts on the binaries used by the tasks. But I notably use 'chmod' and 'chown' in those tasks, and I would not want to give to non-admin accounts rights to run those commands as root outside the admin task scripts. But from my understanding of 'sudo', if I do it, non-admin accounts will be able to use chmod and chown outside the scripts. Is this right ?
The sid bit could have been a solution I think, but sadly it is not supported on Mac OSX 10.5.
Thanks

I am trying to use the sudo route add command in a script, which should run as part of a vpn connection config file. I get an unable to run script error in the log.
I searched and found the following older discussion
http://discussions.apple.com/thread.jspa?messageID=1986808
I tried that but I get a syntax error when trying to save the sudoers file I chose to save anyway.
Tried to run the command from the terminal and got the following error
postdrop warning: unable to look up public/pickup:no such file or directory.
Can you give me an example of your sudoers file with the correct syntax etc.
Thanx

Problems running TestStand 4.0 under non-admin account

I am having problems running TestStand 4.0 under a non-admin account under windows XP. I have done the following:
   1. Set full control protection to entire National Instrument directory
   2. tcverselext.exe was giving me problems until I changed it to run in window 95 compatability mode. Otherwise I get an "you do not have administrator priviliges to run this command" error. Don't know if this is the correct fic for this.
   3. Now when starting TestStand I get a "Retrieving COM class factory for component with CLSID {B2794EF6-C0B6-11D0-939C-0020AF68E893} - failed due to the following error: 80040154." error
Everything works fine as administrator.
Can anyone help me?
Don

The Version Selector needs to be run with Administrator Access. When you are running it in Windows 95 Compatability Mode, you are masking the problem. However, once you set the correct version of TestStand, you no longer need Administrator Access to use the Sequence Editor.
Allen P.
NI

Sudo with non-admin account.

Is it possible to add a non-admin user to Sudo-ers list? If so, where/which file should i be adding it? I am trying to use mysql on a non-admin account and need to use sudo sometimes while trying to setup/modify things. Any help is appreciated.

Look up the man pages for sudoers (a file listing which users may execute what) & visudo (to edit the sudoers file) for answers to your questions.

Access to Resources via Non-admin accounts

Is there any way to provide access to resources so that they are accessible via
non-admin accounts. For e.g. to Retrieve my JMSConnectionfactory i do a
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(username);
env.setSecurityCredentials(password);
Context ctx = env.getInitialContext();
The username and password here is the admin account. This works fine but if i
use a non-admin account(member of Operators group), i get exceptions on Domainloghandler
runtime
Problem: I need to register a mbean that needs to access JMS Resources. Since
our deployment team doesnt want to provide us access to admin accounts, we use
a "operators" group account to register our mbeans. if i do this, i get a
Access not Allowed for subject:principals=[operator, Operators], on ResourceType:
DomainLogHandlerRuntime Action: execute Target: registerToMe.
This happens when my managed resource tries to access a JMS ConnectionFactory.
Instead if i register my mbeans using the admin account, everything is fine and
my managed resource works nice.
This is on weblogic 81 SP1 on Solaris. Please let me know if you need more details.
Any clues/hints/solutions greatly appreciated. There is not a lot of documentation
on how to access/register mbeans using non-admin accounts.
TIA
Raj

I have done some more debugging on this and have narrowed down the issue to the
location where my initialcontext is being obtained.
so if i register my mbean as a non-admin account and do an operation on the managed
resource which fetches initial context, i get the below exception. This is how
i get my initialcontext
weblogic.jndi.Environment env = new weblogic.jndi.Environment();
env.setProviderURL("t3://machine:8102,machine:8103");
env.setSecurityPrincipal("operator");
env.setSecurityCredentials("operator");
Context ctx = env.getInitialContext();
I am doing this from a mbean thats registered on a different managed server(t3://machine:8101)...
Whats wrong with this?
TIA
Raj
"Raj" <[email protected]> wrote:
>
Is there any way to provide access to resources so that they are accessible
via
non-admin accounts. For e.g. to Retrieve my JMSConnectionfactory i do
a
Environment env = new Environment();
env.setProviderUrl(url);
env.setSecurityPrincipal(username);
env.setSecurityCredentials(password);
Context ctx = env.getInitialContext();
The username and password here is the admin account. This works fine
but if i
use a non-admin account(member of Operators group), i get exceptions
on Domainloghandler
runtime
Problem: I need to register a mbean that needs to access JMS Resources.
Since
our deployment team doesnt want to provide us access to admin accounts,
we use
a "operators" group account to register our mbeans. if i do this, i get
a
Access not Allowed for subject:principals=[operator, Operators], on ResourceType:
DomainLogHandlerRuntime Action: execute Target: registerToMe.
This happens when my managed resource tries to access a JMS ConnectionFactory.
Instead if i register my mbeans using the admin account, everything is
fine and
my managed resource works nice.
This is on weblogic 81 SP1 on Solaris. Please let me know if you need
more details.
Any clues/hints/solutions greatly appreciated. There is not a lot of
documentation
on how to access/register mbeans using non-admin accounts.
TIA
Raj

Can't login to local NON-admin accounts-Directory Access set to server

I have a strange problem on a set of laptops that I cannot resolve and am hoping someone can help me.
Here is the issue:
I have a set of building laptops (PowerPC, OSX.4.11) that seemingly will not "search locally" in the authentication process. The logins seem to work fine for NETWORK logins to our Open Directory Master xserve, but these machines will not login to any LOCAL non-admin accounts. The local root and local admin account logins do, however, work fine. ?? The remainder of the building computers (Intel iMacs OSX.4.11) appear to have the exact same settings and login fine both locally and via the network home directories.
I have tried the following:
Deleted DirectoryService preferences folder (MacintoshHD-->Library-->Preferences->DirectoryService)
Deleted the mcx cache in Directory Access
Tried adding a new non-admin user to test (still will not login)
Removed and re-created LDAP configuration (all set to custom)
Tried setting the LDAP to the automatic settings ("Add DHCP-supplied LDAP servers to automatic search policies")
Disabled all network connectivity (turned off Airport and disconnected the ethernet cable), still cannot login to local accounts
Tried to bind in LDAP configuration (when I did bind the machine, it would no longer authenticate to the network authentication server, so I did an "unbind" and restarted and it went back to performing the network logins, but still will not login to local non-admin accounts).
Reset passwords in System Prefs and also re-typed them in NetInfo Manager
Deleted login keychains
Deleted mcx.plist
Reinstalled the OS from disk and local logins worked TEMPORARILY--UNTIL I set the LDAP directory access to authenticate to our server (which I also need for the network logins to work),then, the issue started again.
*Same results with both ethernet and wireless connectivity enabled.
*Note: I also manage these local accounts via WGM (installed on the local machine) and even tried disabling that and still no luck.
Please help...I have spent hours and hours trying to find a solution and nothing seems to work! What am I missing??

Mostly just a bump...
How about that .local extension, or trailing / ?

Installing apps from non-admin account

I read an earlier post that installing apps from a non-admin account is a bad idea because SL applies the wrong permissions. I normally install from a non-admin account.... I don't see that the permissions on stuff I've installed are any different from apps that came with SL. Most everything is drwxr-xr-x. Was this fixed, or am I missing the problem.

KJK555 wrote:
+"That isn't a problem at all. Applications should not require that the user have write+
+access to the application."+
I didn't say anything about a user having write access permission, I was talking about read
permissions. All apps installed in the /Applications directory should have group permissions
set to admin or wheel (depending on the type of app), so the system can read them without
problems. That's the Unix way.
I completely disagee. The system already has read permission to all applications in the /Applications folder. It doesn't matter what the group privilege is set to. The "other" permissions are set to read only. System (root) can read it regardless. If you can show me an Apple tech article that says that apps installed in the /Applications folder should have their group privilege changed to "admin" or "wheel" then I would gladly take that back.
+"Leopard does not put any ACLs on anything installed in the /Applications folder"+
That's right, it doesn't normally, but if it finds an app that it does not have permission
to read, it will assign an ACE(s) to it so that it can access it.
I just tested that in 10.5.8, and it does not happen as you say. I can't try it in 10.6. I'd appreciate if you could provide a specific example where you can make this happen.
Besides, all users, by default, have read only access to all applications. Unless a user specifically changes permissions on an app to deny read access to everyone, then this isn't an issue.
http://discussions.apple.com/thread.jspa?threadID=1875193&start=60&tstart=0
http://discussions.apple.com/thread.jspa?threadID=1866808&start=15&tstart=0
http://discussions.apple.com/thread.jspa?messageID=8776714&#8776714
http://discussions.apple.com/thread.jspa?threadID=1850256&start=30&tstart=0
http://discussions.apple.com/thread.jspa?threadID=2351437&start=15&tstart=0
http://discussions.apple.com/thread.jspa?messageID=9447059&#9447059
http://discussions.apple.com/thread.jspa?messageID=9067640&#9067640
I know what ACLs are and how they work. I have read through those and cannot find in any of those threads anything about what you had been talking about.
+"That is also false. Root rights are granted by the user entering the admin username+
+and password when prompted. It does not matter where an application is installed in+
+order for it to be given root permission."+
http://support.apple.com/kb/HT2963
"Application installers, Applications folder
A third-party application installer incorrectly sets permissions on the files it installs,
or even the entire Applications folder. Symptoms of the Application folder's permissions
being set incorrectly include applications appearing in the dock as question marks, and/or
not being able to connect to the Internet. It is also possible that software installed while
logged in as one user will be inaccessible when logged in as another. To avoid this, make sure
you are logged in with your normal user account when installing software that you wish to use
with that account."
That has to do with third party installer apps that developers have not written properly to conform to OS X standards. It isn't an issue with applications that install by drag-and-drop. It sounds to me like you have looked at the permissions that Apple has put on its own apps and jumped to the conclusion that third party apps won't work unless they have the exact same permissions applied to them. That simply isn't true.
"Software access=user access
Most applications executed by a user only have access to the files that the user has access to.
Backup software, for example, may not back up Mac OS X system files that have root ownership."
Utilities, especially disk utilities, are to be installed in the /Applications/Utilities folder, for reasons
stated above.
No. That is completely wrong. Like I said earlier, an application is given root permission by user authentication. It matters not one little bit what the application's enclosing folder is. I personally have no third party apps in /Applications/Utilities; just what Apple puts there as part of a standard OS X installation.
More permission tips:
http://www.bombich.com/mactips/image.html
http://mostlyslow.blogspot.com/2009/04/technical-mac-os-x-permissions-issues.htm l
Have you even read those? I suggest that you do; because most of what you have written about how file/folder/application permissions in OS X is completely wrong.

Can't run programs from non-admin account: redux

Background: I have years of experience with PCs, very little with Macs. I work with children in a group home. The tech support people who set up this iMac (OS X 10.2) have long since departed, and no one in the organization has any clue as to what changes they made to this system, and I'm sure that those tech people made some changes. For example, in admin accounts other than "root," either there is no access to the Utilities folder or the folder has been well hidden.
The Problem: The boys in this home will use a non-admin account. The programs I have installed for them will run under admin accounts but not under the "boys" account, which is non-admin. The system tells me that the account does not have enough access privileges to run the programs. (Program that had been installed before I got access to this iMac will run under the "boys" account.)
In discussions on this forum several months ago, I thought the answers I got here had helped me solve the problem. Then, for administrative reasons, I did not touch the iMac until last week. What I thought had been solved is not solved.
From "root," using the "Capabilities" option in the Accounts folder, I have added to the "Add other applications..." section the programs I want "boys" to have access to. But this doesn't work. When I log in to "boys," access is denied: insufficient access privileges.
If I give up on this system, the boys will not be able to use this iMac, and that would be a shame.

I realize that it sounds like I ignored all the previous advice before I drafted this latest post. But the first thing I did when I returned to the iMac was to look at the posts.
I didn't touch the system for six months. I was waiting for approval from administration to upgrade the OS. By the time I got the approval, upgrading was no longer an option -- according to the manager of the local Genius Bar. This system is not capable of running 10.5, and Apple will no longer sell 10.4. I can find 10.4 on the Net, but those are private sellers and the price is too high.
Now that I've got that out of the way, the current task: I have no idea why, but the gains I accomplished six months ago have disappeared. The "boys" account can run none of the software I installed. No one else has touched the system. (I live alone.)
I logged on as "root" and went to Accounts. Using 10.2's Capabilities function, I tried to check all the boxes for "boys." But when I close the screen and then re-open it, the system has unchecked "Open all System Preferences"; "Change Password"; and access to "Utilities."
At this point I cannot create new folders under "boys." "boys" can run software that was installed before I got the machine, but that's all.
I have to assume that I inadvertently did something that wiped out my previous gains. But I ain't got a clue.

Problems with libraries and plugins - non admin account

Similar Messages

Maybe you are looking for