Problems With Library Recognising Audio CD

Hi,
My Ipod nano is only about half full but when I put a disk in the CD drive Itunes library won't recognise the CD and allow me to add the songs to my library.
Previously it just automatically bought up the screen where you edit the song name and artist prior to importing the songs.
I've tried uninstalling and reinstalling to no avail. The CD works if I play it without using Itunes but I can't get at it through the library.
How can I fix this? Is it my computer or the library/ipod nano?
Thanks in advance for your help (if you can!!!!)
Ta
Jim

This is a bit of a long shot but check your preferences. In iTunes go to Edit>Preferences>Advanced>Importing and make sure that the menu beside "On CD insert" says "Show Songs"

Similar Messages

My sound is like echo and i can't solve the problem with realtek hd audio manager

HP G72 notebook
Windows 7 64 bit
Sound is like echo and can't solve problem with Realtek HD audio manager

It's a Qosmio X300-16M (windows 7 64bit)
I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
And I just want to know if it's a curent problem or not... and if someone can fix it

Problem with keyboard and audio on Satellite L40

Hi everybody,
I just installed XP SP2 on my Satellite L40 (BTW thanx to all you that have helped me overcome the problems during this operation with your threads), but I have some problem with my keyboard. I have an azerty keyboard and after I installed xp, it worked as a qwerty, I repared it, now all my letters are working fine, but i have some problems with some symbols, such as @, !, _,if you understand me.
Could somebody help me???
I also have problems with my audio, in fact I have no audio at all, in control panel it says that no audio device is found.
I saw some threads that said that I should first install kb888111, and another likely thing, but i can't find the other one. I've downloaded the sound driver from the toshiba website; thanx for helping me in that field also.
bye

I have the same problem with sound...I have found hotfix kb888111 and I instaled that one...but when i wanted to start instaling sound driver a popup window say thet there is some error and can't continue with instaling sound driver...
I found hotfix kb888111 in this folder which i have downladed from toshiba site: english\sound driver\mshdqfe\win2k_xp\us\kb888111xps2....
i do not know what to do.....Does anybody else knows....

It's now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5 audio app missing lyrics

It’s now over 6 weeks since I made the mistake of updating my iPad and I am furious and frustrated at the lack of a solution to the problem with ios 5.
I recently updated to ios 5.1 but nothing has been done to rectify the audio app problems ie lyrics no longer shown,
I am extremely disappointed and angrywith those responsible for the iOS 5 update, in regard to the way it hasaffected the music app in my iPad.
I also own an iPhone 4, am an avid Apple fan, and up until now have beenextremely pleased with the devices, and have sung their praises to friends andassociates.
I am a professional musician, and purchased an iPad primarily to use with theperformance of my music.
The changes made to the music app affected my performances over the weekendextremely adversely – limiting my repertoire and causing confusion and delays.
I have spent many hours talking withApple helpline assistants (who, incidentally have been very good and have triedto help), and I have also spent a lot of time on this letter.
I greatly regret updating to iOS 5.
There are two major problems with the music app.
1. Lyrics no longer displayed
2. Layout, and appearance and consequently performance have seriouslyregressed.
I have a repertoire of around 500 song backing tracks, organised into about 20playlists, half of which featured lyrics / chords that I have spent monthsrecently entering into iTunes so that they could be used on my iPad.
These were working fine up until the update - now they are gone.
Previously, the app featured large icons for playlist, artists, songs etc. atbottom of page: Now there are small, grey, indistinct barely legible buttons.
Previously, when playlist icon was selected - all the playlists were listedclearly in order on the left hand side in black on white (as in iTunes).
Now they are scattered across the whole page in large squares (displayingnothing if there is no album art).
The identifying wording below eachsquare is now small, grey, indistinct & barely legible.
Previously, when a playlist was selected - the songs were displayed in adescending list in black & white: now they appear as small, grey indistinct & barely legible.
Previously, when a song was selected - it appeared filling the page, and withaudio controls clearly positioned at top of screen. One tap would bring uplyrics.
Now audio controls appear at top once again small, grey, indistinct &barely legible.
A small square representsalbum art which if tapped fills page. A further tap fails to bring up lyrics.
Don Wilson

Lyrics aren't supported in the Music app on iOS 5 on the iPad. These are user-to-user forums, they are not monitored by Apple (there are too many forums/threads/messages for that to happen). If you want to leave feedback for Apple then you can do so here : http://www.apple.com/feedback/ipad.html

Problems with AEBS recognising MAC OS Extended USB hard drive

I've just bought the AEBS(n) and connected a hard drive via the usb port. Everything works fine - however when I get info it shows that the format is Appleshare! The hard drive is actually formatted as a MAC OS Extended (journaled) as this is confirmed if I connect the drive directly to my iMac.
Although this may not seem to be a problem as I can read and write to the disk, if I use iMovie it does not recognise the disk and therefore not show my iMovie events, even though there are on the drive and states that i must have a MAC OS extended drive.
I don't know how to ensure that AEBS shows the correct format of the drive so I won't have this problem?
The other thing is that when I use the Aiport Disk Utility it does not show the name of my hard drive in the window, instead the name of the AEBS shows!!??

I think there are a number of problems with the AEBS USB disk support.
- I have a 1 GB flash drive (solid state) that works fine on the AEBS.
- however I also have a 75 GB 2.5 inch Hitachi external USB drive that works fine on all my macs but can not connect to the AEBS. After talking to Apple there seems to be a list of 'supported drives' for AEBS USB drives but I've never seen it and nobody at Apple has it (or at least could send it to me).
- my AEBS has crashed several times when I hook up the Hitachi drive, forcing me to attach the drive to a mac and run disk utility for a disk repair (I guess the AEBS has no disk repair function).
- and it is slooowwww ....
- if you use a USB hub there seems to be a lot more issues -- especially if the hub is USB 1.1 and not USB 2.0.
maybe there will be a firmware update. I know I have filed Radar problems on all these issues....

Problems with image and audio in Premiere

Hi! I'm using Premiere Elements 9, but there's no synchronization with imagen and audio because the image is slower than audio and it's causing problems when I'm editing. Why can I do? It's there a poblem that can I fix in "Preferences" or is my laptop?
I hope your answer,

When you do post the PrE forum, this ARTICLE will give you tips on the types of info, that will be so useful. See you there!
Good luck,
Hunt

TV Show download problem with library on a network share

My local drive has 100GB disk space available. I have my iTunes library configured to be on a network share which happens to be on a NAS (network attached storage) drive. My NAS drive has over 600GB disk space available. When I try to download a TV Show (Battlestar Galactica) I get an error which says that:
"The disk you are attempting to use is full"
This is nowhere near true. I tried several times, then switched my iTunes library to point to my local drive, and the download worked. Does iTunes have a problem with a library on a network share?
Help!
Thanks,
Brad

Not easy because in order to open just one library file you would have to be running the same version of iTunes on all computers which would be limited to the lowest version supported by your computers (the G3). Try to open a iTunes 10 library with 9.2.1 and it will refuse. This in turn might not support your equipment. Even if you can do this you would have to make sure only one copy of iTunes was running because the library file cannot be opened by multiple copies of iTunes at the same time.

Problems with imported mono audio with stereo HD video FCE4

This is with Final Cut Express 4.
So here is what I am doing: I am recording video of my flight lessons inside my airplane with a mounted Panasonic HDC-TM90 HD camera. Since it is noisy inside the plane, I am using an Olympus VN-4100PC digital voice recorder to pick up the Air Traffic Control and Intercom within the airplane (between me and my instructor) which is 22 KHZ mono. I am doing this because I want the sound of the airplane and also the communication so everything works together and you get the best of both worlds (otherwise you would hear one or the other and that's pretty boring). Ok, enough with the intro.
Here is what I am having problems with -- when I get the video, stereo audio with the video and the mono audio all lined up in FCE in my timeline, it starts to get out of sync about 10 minutes or so into the film. And it gets worse as the film goes on. This is driving me nuts and I have NO idea out to fix it.
The only thing I can think of is that my Digital Voice Recorder is recording at a slightly faster speed than the camera's audio and this is why it gets out of whack.
Does anyone have any suggestions on how to fix this? Or at least give me an explanation why it is happening?
Thanks for any help!!

Thanks for the reply. I did this and it still doesn't seem to be matching up properly. Tell me if maybe I missed something.
1. I took the original .WAV file from my Digital Recorder and imported it into iTunes and then converted it into an .AIFF.
2. I took the .AIFF file and imported it into MPEG Streamclip and exported it as another .AIFF file that was Stereo and 48kHz.
Is there a step I missed?

Problems with Nforce4 install - audio/ethernet/raid

Just installed my Neo4 Platinum Nforce4 with XP Home SP2. I have a problem with the drivers. I went to the Nvidia site and download both the Unified Drivers and the standalone Kit for XP.
The unified driver set didn't seem to do anything at all, it seemed to quit half way through the install without giving me any finished message. A quick look in device manager and I saw about seven items with yellow warnings!
I then tried the standalone kit which worked better, however after the install I am still left with 3 items in device manager that are giving me warnings. Multimedia Audio Controller, Ethernet Controll & Serial ATA RAID controller. I have no audio at all, I just the BIOS is all is OK, as it is for everything else. In the sound section of control panel there is no audio hardware available.
Can anyone help please? I dunno what I could have done wrong. It's a fresh install.

I have now done eveything you've said. I installed the Nforce drivers off the CD, and then installed Realtek, Ethernet & RAID via Live update. I also tried to do the NVMixer & Nvidia Audio install install. I installed realtek from the add/remove software menu. I then went into add new hardware and did manual install, show all hardware, have disk. Then I browsed to the Nvidia Audio codec folder on my desktop that I download. I was given an option of two drivers "nvmcp" & "nvmpu". I picked the first and ended up choosed "Nvidia audio codec interface" which then installed. It then appeared in device manager. However, when I clicked the audio panel in control panel I still get no audio device installed? I then tried to install NVMixer and when I try to run the application I get this message:
"the application cannot start because it could not detect any NVIDIA Nforce hardware on your system...."
What am I doing wrong? When I did the driver install there were two things listed in each driver "nvidia audio codec interface" and also "nvidia audio processing unit", which should I be choosing? Even if I try and installed the "MVP audio processing unit" I'll get a code(10) device cannot start in device manager. This is kinda confusing.
I also wondered about the RAID controller software. The silicon image drivers that came on the MSI seem horrible, they installed Java too. Is there any way to disable this controller? In the BIOS I can only see one option to enable RAID and when this is enabled device mananger will show an error on an "unknown device". I assume this is the NVRaid? and speaking of NVraid which is mentioned in big fat type on the back of the MSI box, so far I've seen or heard none of it during this installtion?

Encore CS5 has problems with 5.1 audio and 720p 59.94 fps video

I keep receiving error messages when i import mpeg2 720p 59.94 fps video with dolby 5.1 audio. It says "does not support video with multiple channel audio" or something to that effect. I have had no problems importing mpeg 2 1080i 29.94 fps video w/ 5.1 audio into encore.
Is there any solution to this? I have tried importing as a asset and timeline to no avail. I had to convert to 2 channel stereo for it to work.
thanks.

What would be the steps to do this and what software or freeware would you suggest. I have never demuxed before so please forgive my ignorance.
thanks.

I can not get my i-tunes to play correctly, problem with library I think.

I have had this problem for a really long time and I don't know how to fix it. I can open my i-tunes but when I click to play a song it freezes up and says "i-tunes1 not responding." the only way I can get i-tunes to work is to go into programs and repair it.
I think it is a problem with my library, because I have a folder named i-tunes with my songs in it and a folder named i-tunes1 with my i-tunes library and i-tunes media folder in it. There is nothing in my i-tunes media folder. I have tried consolidating my library and stuff but nothing seems to work. Any suggestions?

How many computers do you have authorized to use your Apple ID. There is a limit of 5 computers. Mobile devices are counted differently from computers.
Please see Authorize your Mac or PC using iTunes.

Problem with conexant smart audio hd

I bought toshiba satellite L750 with conexant smart audio hd sound card... when i connect it to my stereo, it's not the same sound as on other laptop with realtek sound card, it's very low. My phone with 3.5 mm jack gives better sound... is it hardware or software problem... pls help, tnx.

SATELLITE L750-124 specifications
SATELLITE L750-124 drivers
Abysmal your model appears to be from Europe, perhaps Hungry?
I don't have a Conexant sound card, I have a Realtek, so I can't test anything.There doesn't appear to be much in the way of help or advice on this issue on our forum. Perhaps you'll have better luck on the Toshiba Europe Forums.
But, if you find a solution, we'd appreciate you posting it back here.
Good luck!
Mike

Anyone having problems with art/animation/audio disappearing from the timeline after a save?

Hello,
I'm having problems with many files losing their assets from the timeline after a save and reopening the file in Mac OS X Snow Leopard. This is happens quite often now and there seems to be no pattern to it. For example, I will open an existing Flash animation complete with sound and artwork, make changes to the animation timing, test the SWF and everything looks good, then save. After reopening the exact same file, there will be audio that was on the timeline will be an empty frame. In addition, there is art work that was swapped out or updated to a character and the symbols becomes empty after reopening. I'm losing days and hours of work and I can't seem to find any answers or help to figure out what's going on.
Any insight would be appreciated!
thanks!

I now use CS5.5 but I've noticed it on every version since CS4.
I JUST ran the latest update to 11.5.1.349
I'll let you know if it continues but for now I'm planning to learn a new software. Finally have some time to focus on this and if it works out I may say so long to Flash. I'll give CS6 a try but if it's not SIGNIFICANTLY improved (Brush tool comparable to ToonBoom, No losing data, Better Playback, Ability to export HTML5), it's just not worth it anymore. I've been using Flash since version 1 and since Adobe took it over, I hate to say that anything other than actionscript has gone WAY downhill. Many new features but they don't actually work well, or crash at runtime if used beyond a tutorial's level intensity. What's the point of all that functionality if it looks like garbage and can't perform on a professional level? Even if you do take the extra time to work slowly or limited to make it look nice - it loses the data! or now without HTML5 your venues of use are sliced in half? Pointless. I don't want to trash all my Flash experience, but I'm done defending an inferior product and waiting for it to catch up to a modern professional standard. I think my Flash days may be over very soon unfortunately. I feel like the're more interested in defending what they've created, than in making it work or even asking us what we want. I feel like a Girlfriend who's Man keeps promising to get steady work but hasn't after 10 years. Flash...we need to talk.

Problem with Burning DVD/Audio

iMovie HD version 5.0.2. I have been editing movies and burning DVDs for more than a year and have not encountered this problem before. When I play my latest movie, there doesn't seem to be a problem with the music that I imported in only one of the audio tracks. However, when I try to burn a DVD, the video encoding proceeds as usual but the audio encoding stalls when it appears to be about 90% complete. I have produced movies that are 2 hours long and have not run into this problem. The current movie is a little over 1 hour long, so I don't think the length is a problem.
Background info: As in the past, the source of the movie I am editing is a DVD that Walmart converted from old video films. I CINEMATIZED the DVD which I have done in the past to be able to edit the movie. When I copied the WALMART version of the movie, I only imported/copied the video portion and NOT the audio.
I hope this explanation of my problem is detailed enough. I am not very technologically educated so I am limited in my ability to explain the details.

Hi
May be this applies.
*No audio on DVD disc.*
Most common origin:
1 Imported audio from iTunes:
• In iTunes copy out as an audio-CD .aiff
• Use this in Your movie project
2 Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
Before burning the DVD:
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If OK:
• Make Your DVD - or -
• Burn from DiskImage with Apple Disk Util tool - and at an as slow speed as possibly eg x1
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Problems with syncing, recognising iPod, thinking it's corrupted...

Hi, I've had this 30GB iPod photo of mine for a number of years now but for a long time it's been having problems with syncing. I've gotten an exciting variety of error messages when trying to sync with my iTunes, from my iPod software is out of date, by iPod is corrupted, to simply that my iPod will not sync for no adequately explained reason. Occasionally also Windows fails to recognise it. This was never too big of a problem because a few songs would transfer usually before it errored out on me, or I'd just unplug it, restart it and plug it in again and the few songs I wanted would go on. (I don't add giant chunks of new music to it that often) However just recently I discovered that about 300 songs were missing from it and I can't for the life of me get it to sync up again to put them back on. iTunes has been saying that An iPod has been plugged in but that it doesn't recognise it, or it'll start syncing and then say "Attempting to copy to disk "CASSIE'S IPOD" failed. The disk could not be read from or written to." Any help or advice? is my iPod just horribly corrupted in some way and beyond help except for expensive repairs and replacement? Or is this a software thing I can actually fix somehow?

I eventually called an Apple Repair person about my Ipod, who advised me that "it sounded quite serious" and all he would do if I brought it in for repair would be to replace it with another reconditioned unit which would cost me $195! This was a newly "reconditioned" unit that I had just bought, so unfortunately it ended up going back. I've just requested a refund this time because this is the 2nd time this has happened to me in a month! I'm starting to think I was never destined to own an operating Ipod! I think I'll look at a Sony or Creative MP3 Player as an alternate. They seem to have good reviews and they'll probably work first time round! I'm a bit tired of Apple now! There just seems to be too many things that can - and DO - go wrong!

Problems With Library Recognising Audio CD

Similar Messages

Maybe you are looking for