Problems with Line input
Maybe somebody can help...
I'm sending audio signal to the input of my macbook pro...I see the input in the sound section of my system preferences..but hear nothing from headphones or speakers...nothing is muted and all off the input & output adjustments are at about 75%.
Speakers & headphones work fine when playing audio content from within the macbook..
I did this all the time with my old g4...no problem.....what am I missing ?
Thanks !
i'm having exactly the same problem.
i can see the input level on the input section of system preferences, but cannot hear it.
furthermore: i'm also trying to record said input in Logic Pro 8, but anytime i monitor "input 1-2" i get horrible feedback from the internal speaker, even though i've changed the input source to line in.
Similar Messages
-
Problem with lines in Flash!!!
Hello, I am currently using flash cs5.5. I am not having any software malfunctions or anything like that, I am just having a prolem with lines. When drawing with the pen, (or even pencil tool), is there anyway to make the lines you draw one solid line when you're done? For example, if tracing with the pen tool, each time you put an anchor, it creates a different line, which is fine while you're drawing it. I'm wondering is there anyway to select a certain amount of lines and make them one solid line? Let's say I am drawing an ear with the pen tool; by the time i am done drawing it, it is made up of 3 seperate lines. I did not know if there was anyway to select those three lines and make them one solid line? I know that I can double-click, but I just want to select the ear, not the entire head, (which is what happened when I double-click).
Hopefully I got my question across, I'm not really sure how to describe it. Any help is greatly appreciated. Thank you so much!
~~~~~~~~~~~~~~~~~~~~~~~~~~
Also too, on a 100% different note, I am also running into a different problem with lines. When drawing with the pencil tool, everytime I trace something with curves or bumps, by the time I let off the tablet, (this is not a tablet problem), the line with be in 100 different segments, even though I drew the line with one solid motion. It seems to do it more when I am working within a symbol. I do not know if there is a fix for this or not, but again, any help is greatly appreciated.
Please do not get confused, both of these problems are 100% different from each other. The first is just something I am wondering if it exists. The second is more of a malfunction/glitch with the progam. Thanks again!Not sure if I understood you completely but let me suggest you a couple of things.
1. Try drawing in Object mode. (available lower down in the tools panel. shortcut - J)
The entire shape you draw now without releasing your mouse button will be treated as one shape object. These can be selected independently, broken apart (Ctrl + B) and even combined (Modify Menu -> Combine Objects -> Union). You can perform all the normal shape editing tasks as well on shape objects directly.
2. For Pencil/brush tools, you can set the curve smoothness for your tools from the Properties panel -> Smoothness option.
If you already have a line or curve drawn on Stage with too much of segmentation, you can select it then goto bottom of the Tools panel and click on Smooth button multiple times till you get the desired smoothness.,
Hope this helps! Let me know in case of any doubts.
-Nipun -
Do you understand me ? I want money back.Because I have problem with LINE In App Purchase.And no one try to resolve this problem.And the answer of NEVER LINE JAPAN they don't have responsibility.I think it will be effect with APPLE image also.I want you to help me everyways to refound my monet back.Could you?
Contact iTunes Store Support.
-
Problem with the input file format to be stored in database
Hi,
I am facing some problem with the input format. I am using the table name as data.employee. But i could not able to process the message forward. I am getting this error,
com.ibm.db2.jcc.c.SqlException: java.sql.Connection.close() requested while a transaction is in progress on the connection.The transaction remains active, and the connection cannot be closed.
Can you please help me prposing a solution for this format.
Thanks,
SOoryaI think you are missing out the COMMIT operation.
At the DB2 end before closing the connection if you do a 'COMMIT' then this may remove your error.
i.e. after you close the Resultset>close the statement object> perform 'COMMIT' operation--> then close the connection.
Also refer :-
http://www.dbforums.com/archive/index.php/t-976407.html
http://www.dbforums.com/showthread.php?t=1628183
I hope this will help you.
Thanks,
Vijaya -
Problem with tokenized input from command line
I am trying to take an input from the command line, parse it to tokens and perform whatever operation is needed depending on the name of the token, on a binary tree of stacks for example, if i type 1 2 1 3 printLevelOrder, then the root of the tree should have 3, 2,1 in the stack, the left child should have 1 and the right child should be empty. and then a level order print of the tree should be performed.
however what is happening when i run this code is the numbers are being put into the right stacks of the tree, but any commands such as printLevelOrder or PrintPopRoot are entering the code that is for placing numbers onto the stack instead of executing that command and skipping past this piece of code.
so my question is, why is the if statement if (word =="printLevelOrder") not being executed when thats whats in the word ?
example input and output shown below code fragment.
try {
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String line = "";
while (line != "***") {
System.out.print("> prompt ");
line = in.readLine();
StringTokenizer tokenizer = new StringTokenizer(line," ");
String word = new String();
while (tokenizer.hasMoreTokens()) {
word = tokenizer.nextToken();
boolean notCommand = true;
if (word =="printLevelOrder") {
theTree.printLevelOrder();
System.out.println("(word ==printLevelOrder)");
notCommand=false;
if (word == "printPopLevelOrder") {
theTree.printPopLevelOrder();
notCommand=false;
if (word == "printPopInorder") {
theTree.printPopInorder();
notCommand=false;
if (word == "printPopPreorder") {
theTree.printPopPreorder();
notCommand=false;
if (word == "printPopRoot") {
theTree.printPopRoot();
notCommand=false;
if (word == "***") {
notCommand=false;
if (notCommand == true) {
System.out.println("(notCommand == true)");
boolean notPlaced = true;
int v = 1;
while ((notPlaced==true) && (v < theTree.size())) {
if (theTree.element(v).isEmpty()) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("Inserting"+word);
System.out.println("in empty stack at location: "+v);
notPlaced=false;
if (notPlaced==true) {
if ( Integer.valueOf(word) >= Integer.valueOf( theTree.element(v).top().toString() ) ) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("Inserting"+word);
System.out.println("in stack at location: "+v);
notPlaced=false;
v++;
}valid inputs: int value, printLevelOrder, printPopLevelOrder, printPopInorder, p
rintPopPreorder, printPopRoot, *** to quit
prompt 1 3 2 4 2 printLevelOrder(notCommand == true)
Inserting1
in empty stack at location: 1
(notCommand == true)
Inserting3
in stack at location: 1
(notCommand == true)
Inserting2
in empty stack at location: 2
(notCommand == true)
Inserting4
in stack at location: 1
(notCommand == true)
Inserting2
in stack at location: 2
(notCommand == true)
Exception in thread "main" java.lang.NumberFormatException: For input string: "printLevelOrder"
at java.lang.NumberFormatException.forInputString(NumberFormatException.java:48)
at java.lang.Integer.parseInt(Integer.java:447)
at java.lang.Integer.valueOf(Integer.java:553)
at TreeStack.main(TreeStack.java:73)
Press any key to continue . . .lol aww, shame that you forgot to do that. i had 10 / 10 for mine, and seing as the deadline is now well and trully over,
here is the entire source for anybody who was following the discussion or whatever and wanted to experiment.
additional files needed >
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/Stack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/ArrayStack.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackEmptyException.java
http://users.cs.cf.ac.uk/Paul.Rosin/CM0212/StackFullException.java
/*TreeStack.java - reads command line input of values and assigns them to stacks in a binary tree and performs
operations on the ADT. valid inputs: <int>, printLevelOrder, printPopLevelOrder,
printPopInorder, printPopPreOrder, printPopRoot. Terminates on invalid input.
Written by George St. Clair.
S/N:0208456 22/11/2005
import java.util.Vector;
import java.io.*;
import java.util.StringTokenizer;
public class TreeStack {
private final int TREE_CAPACITY = 7 + 1;
private final int STACK_CAPACITY = 10;
Vector tree = new Vector(TREE_CAPACITY) ;
//collect input from command line, add values to stacks at nodes of the teee
//and perform required operations on the treestack
public static void main (String [] args) {
//create a tree of stacks
TreeStack theTree = new TreeStack ();
try {
//collect standard input
BufferedReader in = new BufferedReader(new InputStreamReader(System.in));
String line = "";
while (line != null) {
System.out.print("");
line = in.readLine();
//tokenise input
StringTokenizer tokenizer = new StringTokenizer(line," ");
String word = new String();
while (tokenizer.hasMoreTokens()) {
//assign word to the token
word = tokenizer.nextToken();
boolean notCommand = true;
//perform operation on treestack depending on what word is
if (word.equals("printLevelOrder")) {
System.out.println("printLevelOrder");
theTree.printLevelOrder();
notCommand=false;
if (word.equals("printPopLevelOrder")) {
System.out.println("printPopLevelOrder");
theTree.printPopLevelOrder();
notCommand=false;
if (word.equals("printPopInorder")) {
System.out.println("printPopInorder");
theTree.printPopInorder();
notCommand=false;
if (word.equals("printPopPreorder")) {
System.out.println("printPopPreorder");
theTree.printPopPreorder();
notCommand=false;
if (word.equals("printPopRoot")) {
System.out.println("printPopRoot");
theTree.printPopRoot();
notCommand=false;
//if word was not a command it must be a number
if (notCommand == true) {
boolean notPlaced = true;
int v = 1;
//starting at the root, find suitable place for number
while ((notPlaced==true) && (v < theTree.size())) {
//if the stack at v is empty, number goes here
if (theTree.element(v).isEmpty()) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("inserting: "+word);
System.out.println("in empty stack at location: "+(v-1));
notPlaced=false;
//if the stack is not empty
if (notPlaced==true) {
//if the value on the top of the stack is smaller than number, number goes onto the stack
if ( Integer.valueOf(word) > Integer.valueOf( theTree.element(v).top().toString() ) ) {
theTree.element(v).push(Integer.valueOf(word));
System.out.println("inserting: "+word);
System.out.println("in stack at location: "+(v-1));
notPlaced=false;
//if that node was no good, check the next one for suitability
v++;
catch (Exception e) {
//occurs when user inputs something that is neither a command, or a number, or upon EOF, or stack is full
public TreeStack () {
//create the TreeStack ADT by adding stacks in the vector, note vector 0 is instantiated but not used.
for (int i = 1;i<=TREE_CAPACITY;i++)
tree.add(new ArrayStack(STACK_CAPACITY));
public int size() {
//return the size of the tree +1 (as 0 is not used)
return tree.size();
public ArrayStack element (int v) {
//return the ArrayStack at v
return (ArrayStack)tree.get(v);
public int leftChild (int v ) {
//return left child of v
return v*2;
public int rightChild (int v ) {
//return the right child of v
return v*2+1;
public boolean children (int v ) {
//search for children of v and return true if one exists
for (int i =v;i<size();i++) {
if (i/2==v ) {
//left child found at i
return true;
if ((i-1)/2==v ) {
//right child found at i
return true;
//no children found
return false;
public boolean isInternal (int v ) {
//test whether node v is internal (has children)
if (children (v)== true) {
//has children
return true;
return false;
//print the top value in each stack encountered on a level-order traversal of tree
public void printLevelOrder() {
//for every node of tree v
for (int v = 1;v<size();v++) {
if (!element(v).isEmpty() ) {
//print the top value in stack v
System.out.println(" "+element(v).top());
else {
//stack at v is empty
System.out.println(" -");
//pop off and print the top value in each stack encountered on a level-order traversal of tree
public void printPopLevelOrder () {
//pop off and print the top value in stack v
for (int v = 1;v<size();v++) {
//for each node of tree v
if (!element(v).isEmpty() ) {
//if v isnt empty print the top value in stack v
System.out.println(" "+element(v).top());
//pop the top value in the stack at v
element(v).pop();
else {
//stack at v is empty
System.out.println(" -");
//pop off and print the top value in each stack encountered on an in-order traversal of tree
public void printPopInorder () {
printPopInorder (1);
public void printPopInorder (int v) {
boolean isInternal = false;
if (isInternal (v)) {
//use a boolean for isInternal to save on running the method twice
isInternal = true;
//recursively search left subtree
printPopInorder (leftChild(v));
//pop off and print the top value at v
if (element(v).isEmpty() ) {
//stack at v is empty
System.out.println(" -");
else {
//if v isnt empty print the top value in stack v then pop
System.out.println(" "+element(v).top());
element(v).pop();
if (isInternal ) {
//recursively search right subtree
printPopInorder (rightChild(v));
//pop off and print the top value in each stack encountered on an pre-order traversal of tree
public void printPopPreorder() {
printPopPreorder(1);
public void printPopPreorder(int v) {
//pop off and print the top value at v
if (!element(v).isEmpty() ) {
//if v isnt empty print the top value in stack v then pop
System.out.println(" "+element(v).top());
element(v).pop();
else {
//stack at v is empty
System.out.println(" -");
if (isInternal (v)) {
//recursively search left and right subtrees
printPopPreorder (leftChild(v));
printPopPreorder (rightChild(v));
//pop off and print all values from the stack at the root
public void printPopRoot (){
//while the root stack has values left
while (!element(1).isEmpty()) {
//print, then pop
System.out.println(" "+element(1).top());
element(1).pop();
} -
Problem with direct input program while uploading data into database
TABLES: BGR00, " Mappensatz
BMM00, " MM01/MM02 BTCI-Kopfdaten
BMMH1, " MM01/MM02 Hauptdaten
BMMH2, " Länderdaten (Steuern)
BMMH3, " Prognosewerte
BMMH4, " Verbrauchswerte
BMMH5, " Kurztexte
BMMH6, " Mengeneinheiten
BMMH7, " Langtexte
BMMH8. " Referentielle EAN's
Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
KOPFSATZ LIKE BMM00-STYPE VALUE '1',
HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
LANDSATZ LIKE BMM00-STYPE VALUE '3',
PROGSATZ LIKE BMM00-STYPE VALUE '4',
VERBSATZ LIKE BMM00-STYPE VALUE '5',
KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
MESATZ LIKE BMM00-STYPE VALUE '7',
TEXTSATZ LIKE BMM00-STYPE VALUE '8',
EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
MARC, "Material Master: C Segment
MARD, "Material Master: St Loc/Batch
MBEW, "Material Valuation
MVKE, "Material Master: Sales Data
MLGN, "Material Data per Whse Number
MLAN, "Tax Classification: Material
T001W, "Plants/Branches
TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
REC_COUNT_BAD TYPE I,
ZJOBID LIKE TBIZU-JOBID,
ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
ZMATNR LIKE MARA-MATNR,
ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
LIT_CHAR TYPE C VALUE '_',
LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
MATNR(18) TYPE C, " Material code
UMREN(6) TYPE C, " Denominator
MEINH(3) TYPE C, " Alternate UOM
UMREZ(6) TYPE C, " Numerator
END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
NO INTERVALS
LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
DEFAULT 0,
P_JOBNAM LIKE TBICU_S-JOBNAME
MEMORY ID BM1,
P_DI_EXE AS CHECKBOX
DEFAULT LIT_CHECK,
P_MAPPE LIKE BGR00-GROUP
DEFAULT 'MRP_UOM_LOAD'
NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_PATH'
CHANGING
FILE_NAME = S_PATH-LOW
FILE_NAME = P_PATH
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
MOVE S_PATH-LOW TO PARMS-PATH.
MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
AT NEW LOW.
CLEAR INP_DATA.
REFRESH INP_DATA.
Read source data into internal table
PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
ZTEXT = TEXT-007.
ZTEXT+13 = PARMS-DS_NAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
LOOP AT INP_DATA.
Reset tables for each record
BMM00 = I_BMM00.
BMMH1 = I_BMMH1.
BMMH6 = I_BMMH6.
Load structures with data
MOVE-CORRESPONDING INP_DATA TO BMM00.
PERFORM 2000_WRITE_OUTPUT USING BMM00.
MOVE-CORRESPONDING INP_DATA TO BMMH1.
PERFORM 2000_WRITE_OUTPUT USING BMMH1.
MOVE-CORRESPONDING INP_DATA TO BMMH6.
PERFORM 2000_WRITE_OUTPUT USING BMMH6.
REC_COUNT = REC_COUNT + 1.
ENDLOOP.
ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
FORM 0500_INIT_BMM00 *
Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
FORM 0000_HOUSEKEEPING *
Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
FORM 0010_LDS_NAME *
Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
EXPORTING
REPORT = TBICU-REPNAME
VARIANT = TBICU-VARIANT
IMPORTING
TECHN_DATA = VARTECH
TABLES
VARIANT_VALUES = VALUTAB
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
ELSE.
MESSAGE I001 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ELSE.
MESSAGE I000 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0040_INIT_STRUCTS *
Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
FORM 3000_START_DI_JOB *
Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
EXPORTING
JOBID = ' '
JOBTEXT = TBICU-JOBNAME
REPNAME = TBICU-REPNAME
SERVER = TBICU-EXECSERVER
VARIANT = TBICU-VARIANT
NEW_JOB = 'X'
CONTINUE_JOB = ' '
START_IMMEDIATE = 'X'
DO_NOT_PRINT = 'X'
USERNAME = SY-UNAME
IMPORTING
JOBID = ZJOBID
JOBCOUNT = ZJOBCOUNT
EXCEPTIONS
JOB_OPEN_FAILED = 1
JOB_CLOSE_FAILED = 2
JOB_SUBMIT_FAILED = 3
WRONG_PARAMETERS = 4
JOB_DOES_NOT_EXIST = 5
WRONG_STARTTIME_GIVEN = 6
JOB_NOT_RELEASED = 7
WRONG_VARIANT = 8
NO_AUTHORITY = 9
DIALOG_CANCELLED = 10
JOB_ALREADY_EXISTS = 11
PERIODIC_NOT_ALLOWED = 12
ERROR_NUMBER_GET_NEXT = 13
OTHERS = 14.
IF SY-SUBRC EQ 0.
WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
LOGICAL_FILENAME = PARMS-LDS_NAME
OPERATING_SYSTEM = SY-OPSYS
IMPORTING
FILE_NAME = PARMS-DS_NAME
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E002 WITH PARMS-LDS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0030_OPEN_FILE *
Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
encoding default. "thg191105
IF SY-SUBRC NE 0.
MESSAGE E003 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 1000_GET_SOURCE_DATA *
Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = FILENAME
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
importing
filelength =
TABLES
DATA_TAB = INP_DATA
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = W_FILENAME
FILETYPE = W_FTYP
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
FORM 4000_PROGRESS_INDICATOR *
Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT
EXCEPTIONS
OTHERS = 1.
ENDFORM.
*eject.
FORM 9000_END_OF_JOB *
Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV -
Problems with "Line-In sounds" after rebooting..
Hi,
I have some problems with my TV card. When I press reset button or switch on my PC and wait, about 3-5 sec. ahead of enter to Windows XP SP1, I can hear PFFFFFFFFFF.... from my speakers. I hear it until I activate MSI radio or MSIPVS (programs using LINE IN input).....then is "Line IN sound" is OK. If I close all MSI applications..... Line IN is Silent - That's right!!
Please help me, what can I do ....
I tried old and newest drivers....but still PFFFFFF ....agrrrrhhh !!!!
I have 2 sound cards (and 1 on board) and problem is still identical.The problem is related to the Crossbar driver
There was a solution posted befrore in this forum and that was to change the crossbar driver from MSI with one of from a leadtec xp2000
check https://forum-en.msi.com/index.php?threadid=40100&sid=&hilight=crossbar+driver -
Problem with line items print in Script MAIN window.
Dear Friends,
I am facing a problem with display the line items in main window.
Here i have created my form with 2 pages,
in first page i have created header window(my header information is full length of page), in second page i have created 2 windows, one for MAIN window and second for FOOTER window,
i am having the Footer information about to off the page.
and in my main window total 3 line items are coming, if i am having 3 line items then it is displaying properly (first 3 line items then immediately footer information on same page) but if am having more then 3 line items say four, then in my second page first it is printing 3 line items then it is switching into another page. After that footer is coming but. in previous page after printing 3 line items the remaining page is empty..
my client want me to remove that place also. he wants to display continue..
i think so u people r understand what is my problem...pls advice me what i want to do to solve this problem.
Thanks
Sridhar.Hi Sridher,
If you want to display the footer information only on the last page why dont you use a table to display your details and place the footer details in the table footer instead of a seperate footer window.
Regards,
Vidya. -
Problem with increasing input field length in module pool programming.
Hi All,
I have created a screen in which i have used table control wizard. In my table control I have an input field. The problem is, this input filed only takes 23 inputs at a time. I need to make this field unfixed. This is an quantity field. I am not understanding why this is happening. Can anybody plz help me in this regard ?
Thanks in advance.
Tripod.HI Tripod ,
YOu can add Lines to Table control .
Add one button by name ADD LINES : give func code 'ADD'
IN PBO ...
if it_mat[] is not initial .
describe table it_mat lines ln .
tab_ctrl-lines = ln .
endif.
case sy-ucomm .
when 'ADD' .
perform add_lines .
endcase .
form add_lines .
ln = ln + 1 .
clear it_mat .
append initial line to it_mat .
endform .
regards
deepak. -
Problems with line weight below 1pt
In Illustrator CS6, when I draw a horizontal line, either with the pen tool or the line tool, the line weight cannot be set below 1pt. If I draw the line at an angle, I can set the line weight to be smaller than 1pt. If I change the position of this line from diagonal to horizontal, then the line weight snaps back to 1pt. Does anyone have any idea why this happening or how to fix it? Thank you!
Look for align to pixel grid
Illustrator: Problems with Align to pixel grid -
Problems with line numbers (building via ant).
We use ant for our builds and are having a problem with getting line numbers into call stacks. When running on linux we do not get the lines for our projects (not all projects have debug option), just (Unknown Source), however we do see line numbers for the tib jars. Eclipse is fine, we can see all line numbers as appropriate.
I have tried "lines", "lines,source" and "lines,var,source" - all build a different sized jar which suggest something is getting added. However as we see line nums for tib it suggests it's some strange java runtime option. We're using sunjdk 1.5.10 and also jrockit.
Any ideas/answers most appreciated.
Many thanks, Declan
Ant task
<target name="compile" depends="init">
<javac target="1.5" destdir="${classes}" debug="on" debuglevel="lines,source">
<src path="${src}"/>
<classpath refid="default.classpath"/>
</javac>
<javac target="1.5" destdir="${classes-test}" debug="on" debuglevel="lines,source">
<src path="${testsrc}"/>
<classpath refid="default.classpath"/>
<classpath location="${classes}"/>
</javac>
</target>
Example output
java.lang.IllegalArgumentException: Field data is null
at com.tibco.tibrv.TibrvMsg._addImpl(TibrvMsg.java:1503)
at com.tibco.tibrv.TibrvMsg.add(TibrvMsg.java:1020)
at com.lehman.fid.jdt.channel.tibrv.TibrvMessage.putObject(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.buildSubMessage(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.buildSubMessage(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.publishDepth(Unknown Source)
Cmd line
VM_OPTS="-Dlogfile=../../log/CmdOrderBook.log"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.authenticate=false"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.password=false"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.ssl=false"
PARAMS="-springcfg orderbook-context.xml -instancename CmdOrderBook"
exec ${JAVA_HOME}/bin/java -DappInstance=CmdOrderBook -server -Xmx500M -Xms250M -Xincgc ${VM_OPTS} com.lehman.cmd.etrading.orderbook.CommoditiesOrderBook ${PARAMS} >> ../../log/Cm
dOrderBook.out 2>&1We use ant for our builds and are having a problem with getting line numbers into call stacks. When running on linux we do not get the lines for our projects (not all projects have debug option), just (Unknown Source), however we do see line numbers for the tib jars. Eclipse is fine, we can see all line numbers as appropriate.
I have tried "lines", "lines,source" and "lines,var,source" - all build a different sized jar which suggest something is getting added. However as we see line nums for tib it suggests it's some strange java runtime option. We're using sunjdk 1.5.10 and also jrockit.
Any ideas/answers most appreciated.
Many thanks, Declan
Ant task
<target name="compile" depends="init">
<javac target="1.5" destdir="${classes}" debug="on" debuglevel="lines,source">
<src path="${src}"/>
<classpath refid="default.classpath"/>
</javac>
<javac target="1.5" destdir="${classes-test}" debug="on" debuglevel="lines,source">
<src path="${testsrc}"/>
<classpath refid="default.classpath"/>
<classpath location="${classes}"/>
</javac>
</target>
Example output
java.lang.IllegalArgumentException: Field data is null
at com.tibco.tibrv.TibrvMsg._addImpl(TibrvMsg.java:1503)
at com.tibco.tibrv.TibrvMsg.add(TibrvMsg.java:1020)
at com.lehman.fid.jdt.channel.tibrv.TibrvMessage.putObject(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.buildSubMessage(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.buildSubMessage(Unknown Source)
at com.lehman.cmd.etrading.orderbook.dp.DefaultDepthPublisher.publishDepth(Unknown Source)
Cmd line
VM_OPTS="-Dlogfile=../../log/CmdOrderBook.log"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.authenticate=false"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.password=false"
VM_OPTS="${VM_OPTS} -Dcom.sun.management.jmxremote.ssl=false"
PARAMS="-springcfg orderbook-context.xml -instancename CmdOrderBook"
exec ${JAVA_HOME}/bin/java -DappInstance=CmdOrderBook -server -Xmx500M -Xms250M -Xincgc ${VM_OPTS} com.lehman.cmd.etrading.orderbook.CommoditiesOrderBook ${PARAMS} >> ../../log/Cm
dOrderBook.out 2>&1 -
Problem with midi input in Mainstage
Hi all,
I have a keyboard connected to my mac via USB midi interface.
When I'm trying to play midi instruments in Garage Band - it works very well, no significant latency and no other problems.
But in Mainstage the situation with the midi input is different. When I press a key on my keyboard, it plays the sound, then stops responding to other midi commands for about 2-3 seconds. And then after I press another key, it plays it, and stops responding again.
The "CPU" and "Memory" indicators at the top show a low load.
All in all, it's just impossible to play a midi instrument in Mainstage.
As the midi interface is working correctly in GarageBand and doesn't work well in Mainstage, I suspect that it's a Mainstage's software problem. But I haven't found anything like that on the Internet. Any ideas?
Devices: Macbook Pro 13" (2011), M-Audio MidiSport Uno...
Thanks!I can input Chinese in Firefox, but there are
problems with the display of characters in input
fields for searches, etc.
Can you provide a specific example of a particular search box (url) and exactly what the "problem" is (TC or SC, characters involved, etc)? I would like to try and duplicate it. Perhaps the encoding in View > Text Encoding needs to be adjusted for that page for some reason (though normally that should affect all browsers).
Since Apple has nothing to do with FireFox, you might want to report the issue to the people responsible for that program (mozilla.org I think), since it may be a bug they can fix. -
Problems with line chart rendering
Hi.
I have some problems with a line chart with 2 series.
I have the folowing series:
SELECT null link, t.column_value eticheta, EVM_REPORT.ACTUAL_COST2(:P37_PROJECTID, t.column_value) valoare
FROM TABLE(utils.table_for_iteration(
to_date('2007-05-20', 'yyyy-mm-dd'), sysdate)) t
SELECT null link, t.column_value eticheta, 7 valoare
FROM TABLE(utils.table_for_iteration(
to_date('2007-05-20', 'yyyy-mm-dd'), sysdate)) t
function table_for_iteration(param_start in date,param_end in date) return DATE_ARRAY PIPELINED AS
BEGIN
FOR i IN 0 .. (param_end - param_start)
LOOP
PIPE ROW(param_start + i);
END LOOP;
RETURN;
END table_for_iteration;
FUNCTION actual_cost2(in_project_id in number, end_date IN DATE) RETURN number AS
begin
return 2;
end actual_cost2;
The chart does not display (at all). If i replace EVM_REPORT.ACTUAL_COST2(:P37_PROJECTID, t.column_value) with some value, it displays.
Any ideea ?Hi,
Do you mean point the partial trigger to the surrounding container? I have tried that but it makes no difference. I am almost certain that the problem is associated with the forEach component as if I have exactly the same structure but without the forEach then the ppr works fine.
Thanks for your help on this,
Dave -
Hi guys,
I've some problems with the implementation of the solution described in HowTo guide "HowTo line items in IP..." .
When I've activated the char. relationship as desribed like in the HowTo paper I get an error message, when I'm deactivating the char. relationship everything is fine.
Now my question: do I've to implement the coding for the char. derivation in every method or just in the derive-method?
Here is my coding...
FIELD-SYMBOLS: <l_chavl> TYPE ANY.
fill ID
ASSIGN COMPONENT 'ZA_000671' OF STRUCTURE c_s_chas
TO <l_chavl>.
CALL FUNCTION 'GUID_CREATE'
IMPORTING
ev_guid_32 = <l_chavl>.
fill user
ASSIGN COMPONENT 'ZA_000672' OF STRUCTURE c_s_chas
TO <l_chavl>.
<l_chavl> = sy-uname.
fill date
ASSIGN COMPONENT '0DATE' OF STRUCTURE c_s_chas
TO <l_chavl>.
<l_chavl> = sy-datlo.
fill time
ASSIGN COMPONENT '0TIME' OF STRUCTURE c_s_chas
TO <l_chavl>.
get time field <l_chavl>.
It qould be great, if somebody can tell, what I'm doing wrong here.
Cheers+kind regards,
ClemensHi,
For user you have to write complete technical name of the user InfoObject. Say if it is ZUSERID then you should write:
ASSIGN COMPONENT '/BIC/ZUSERID' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-uname.
For standard InfoObjects like 0DATE you can simply write
ASSIGN COMPONENT '0DATE' OF STRUCTURE c_s_chas TO <l_chavl>.
<l_chavl> = sy-datlo.
Regards,
Deepti -
Hey all
I have some problems with my OS X behavior. This morning, when I restarted the computer line spacings in OS X were screwed. The text is strange, in some programs, but not all. Here are two screen shots to show the problem:
The menu bar acting strangely (charged is like superscript):
iTunes have problems too, the line spacing is very small. This happens in my browsers too (Firefox, OmniWeb) but not on every homepage, but for example on Facebook and Google:
Anyone who knows how to solve the problem?Okay, I solved the last problem. By completely removing the false Lucia Grande font iTunes is back to normal. It seems like I, by mistake, had a Lucia Grande font with wrong line spacing, which was overruling the system font.
Sorry for the inconvenience ...
Maybe you are looking for
-
WLAN Controller learning IP/MAC on wrong virtual interface
Hello I believe since I upgraded my WiSM to 7.0.250.0 is it learning a MAC address on the wrong virtual interface. The setup: - a Linux server with 2 virtual interfaces, both use the same MAC address, one is the gateway of VLAN 116 and one is the gat
-
Extraction from R/3 extractor to flat file
Hi, I want to be able to extract data using r/3 extractors (LIS/Business Content extractor) into r/3 itself loading the data into a transparent table or loading the data into a flat file on the application server. As an example, i want to extract dat
-
Some Data in Calendar Disappeared Without Me Deleting It
I had been using the Calendar portion of my Palm desktop software and everything seemed fine. I closed out of it and 1/2 hour or so later opened it up again to enter something and a whole bunch of my data has disappeared. Any suggestions on whether
-
Line Number in sequence for Order No
HI, I am using AIA Approach to Insert data from Legacy System to Target Sysytem(Database Adapter). I need to insert line number in the database for eache OrderNo and for same repeated Order No, it shoud count plus 1 and if differnt Order number will
-
IPhoto stops responding if I try to use another app or the desktop
iPhoto seems to work fine as long as I don't try to do anything outside it. As soon as I go to another app, open a folder on the desktop, or do anything not inside iPhoto, the beachball appears. I have to Force Quit. I always go to the Activity Monit