Problems with Linksys router...

Ever since I upgraded to Leopard a few weeks ago, I have felt nothing but the urge to pull my hair out. Okay, I'm exaggerating a little... but the non-internet is getting old quick.
I can connect to all other networks, including my neighbor's behind us and beside us. I can't connect to our wireless though, and I don't know why! It's not password protected, no one has the same wireless name as us, but my Airport seems to hate it. I either get: "AirPort does not have an IP address and cannot connect to the Internet." or some evil mumbo-jumbo about a "self-assigned IP address and cannot connect to the Internet."
Linksys model #BEFW11S4 -- if that helps any?
I'm using Leopard 10.5.4
Airport Extreme (0x168C, 0x87), Firmware Version 1.4.3.1
...Help, please? I'd really like to get internet in my bedroom. It's the one place where the neighbor's wireless doesn't go.

I have the exact same problem. My solution is to shut off all network devices and restart them. Make a new "Network Location" called "All Off". Set it to all your interfaces to disabled. Actually they don't let you do that so leave the Firewire device there since you probably won't use it. Be sure to press the "Apply" button to activate the new location. Wait a minute then turn your interfaces back on. Hopefully it will be able to connect. If not, reboot your router while the devices are off and turn them back on when the Linksys is up and running. Remember when you reboot your router to leave it unplugged for 15 seconds so all the electrons evaporate.

Similar Messages

Problem with Linksys Router Model WRT110 Not Assigning IPs With DHCP?

Hello,
I recently purchased this router (WRT110) to take the place of my old Belkin that was continually dropping connections (which was a real pain when trying to download stuff off the Internet).
However, I cannot get this router to assign IPs to wired or wireless computers. I spent around 2 hours talking to Linksys support technicians (two total) before they finally told me the router was defective.
So, I went back to the store and got an exchange. But, it's the same story with this router, the connections can't get past the "acquiring network address" stage in the connection process.
I would like to think that this has more to do with my ISP than the router, but if I set up a static IP on the wired computer I can connect to the Internet and the router through its default gateway. Setting up a static IP on the wireless computer doesn't seem to work, however. If the ISP was a problem, wouldn't the router not detect the Internet connection at all?
DHCP is definitely enabled on the router also.
My ISP is a small town owned company. I have a wireless broadband connection, which works similarly to satellite, only the connection is broadcast via a tower and is received with an outside antenna.
I still need to contact them about this, but I figured it could hurt to ask here and see some of your suggestions.
Thank you!
~RJG

UPDATE: I contacted my ISP today and the technician I spoke with said he didn't know of any problems any routers would have with their wireless broadband. I tend to agree with him, as I've configured two routers previously using my connection and I've never had any difficulty until now. He suggested changing the ethernet cable and releasing/renewing my IP address, both of which I did but I continued to have the same issues.
But, after doing some more research I found some settings that actually allowed my wireless computer to connect. There was a post in these forums referring to modifying the MTU, changing it from Auto to Manual and changing the value to 1458 actually seemed to work, as well as strengthening the connection by changing the beacon interval. Anyway, I can connect wirelessly now.
Also, I connected my Linux computer (Ubuntu 8.04 Hardy Heron) to the router and was able to connect instantly, no problems whatsoever. So, out of my three computers, two are connecting, but my wired Windows computer is still having issues. However, if I set a static IP for that computer, I can connect fine.
I'm thinking maybe there is something wrong with the NIC card in that computer, but how would one test something like that?
It doesn't make sense to me, I would really appreciate any input. Thank you!

Powerbook has range problem with Linksys Router. Don't Understand!

Well, I have a Linksys Wireless Router WRT54G v4 with a secure network. I get my Mac and PC to connect with no problem when they are in the same room as the router. When I go to another room, the PC stays connected but the Mac looses connection. I never had this problem before. If you're wondering I'm using a 17" Powerbook with OSX 10.4.8
I only have these two laptops using the router. I had v1 of the router and it went out on me and Linksys sent me v4. Well with the v1, I was able to get connection anywhere in the house with both laptops. Now, even when I'm right next to the router in the same room, the Mac is not getting a full bar, only 3/4. And when I leave the room, I get 0 on teh bar. It just doesn't make sense.
If you have any ideas, please let me know because I've done everything to get it to work. From reseting the router completely, to setting up a secure network, to trying different channels on the router.

Welcome to the Apple discussions.
Do you have the lastest V4 firmware, which is available from Linksys's web site. They also have a support forum where people list firmware issues.
Have you considered any of the third party firmwares available? The WRT54G has publicly available firmware that others have modified to give more flexibility, some which include the ability to increase the signal output. There's a listing under third part firmware at http://en.wikipedia.org/wiki/WRT54G#Third-partyfirmwareprojects .
Have you tried any of the Linksys suggestions for router placement to maximize the signal? Apparently the V4 box introduced something...so this may be worth a try, too.
You've probably looked over the Linksys support web site already (even though the support staff can't spell mac), perhaps you've also done a Google query, something like 'wrt54g v4 problems'.

Problem with Linksys router wtr54g V6

Hello, well first they tell the story of the beginning:
It turns out that my neighbor occasionally connects to my network, so I decided to put a password so use google for a tutorial to get password, I went to http://192.168.1.1 and "configured" so that I put my password, after that I had to disconnect and reconnect it to me now to request the password to my surprise ...... but I was not connected (I could not be said to connect to Linksys) so scared only thing to do was reset the Roustan.
after that try to configure it again, I entered 192.168.1.1 but I left a message that a firmware required to enter the configuration page, so I decided to download one from the Linksys website, got off to a version 6 router.
When I went down and apply the firmware file:
[img=http://img200.imageshack.us/img200/447/firmware.jpg] the image
after that I left a message saying "Upgrade Success"
[img=http://img193.imageshack.us/img193/1694/unpgrade.jpg] the image
but I waited and waited and did not pass anything, I tried entering 192.168.1.1 again but I came back out the window told me that required a new firmware or the previous window, and do not know the truth.
The issue now is that this router apart from 0 and I do not have the installation CD.
Elders of the network will help me plise.
PD:sorry for my nglish , i speak spanish , i used "google traductor"
PD2:if anyone has the installation CD for WRT54G version 6 would greatly appreciate it

As you upgraded the firmware of Your Router...you need to reset and reconfigure your router....
Press and hold the reset button for 60 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

WPA2 Problems with Linksys WAG120N Router

Hi,
with this router (wpa2 and b+g+n) the connection lost after minutes and the routers hangs up.
I will test today with b+g.
Does anyone also have problems with this router and the pb?
I don't want use WPA.
Regards
Volker

I had problem with my Router... The playbook would not see the router, or when it would it would disconnect after a few seconds.. I changed one setting and fixed it. All I did was change the wireless channel it was set at 12 - changed it to 2 and it connects every single time now. I didn't change the wireless type or encryption, just the channel and it works 100% now. I did a few tests and it seems to work fine in any channel apart from 12 (maybe RIM didn't think anyone would use that?) If your set to automatic, worth setting it manually just in case. So worth checking.

Using Airport Extreme with Linksys Router/Modem

I was just told that my Mac mini is excruiatingly slow on the internet because I am using a Linksys router with Xfinity and that Airport Extreme will be much faster. And that I should plug Airport Extreme into the modem. When I checked, I don't have a separate modem. My Linksys is a combined router/modem. What should I do? Do I plug the Airport Extreme into the Linksys box, or do I get a completely different modem that is only a modem? And, if I plug Airport Extreme into the Linksys box, how do I configure the network for Airport Extreme, and what else do I need to do? All help greatlly appreciated...I can barely get onto the Apple website!

When I signed up with Xfinity one of the stipulations was that they would not install a router/modem but only a modem. I had heard of problems with their router/modem and I didn't want to go down that path.
I don't but you mighht be able to get them to change out your router/modem for a modem. I would start there by asking them.
Allan

I need advise and help with this problem . First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product . At the present time I'm having lots of problems with the router so I was looking in to

I need advise and help with this problem .
First , I have been with Mac for many years ( 14 to be exact ) I do have some knowledge and understanding of Apple product .
At the present time I'm having lots of problems with the router so I was looking in to some info , and come across one web site regarding : port forwarding , IP addresses .
In my frustration , amongst lots of open web pages tutorials and other useless information , I come across innocent looking link and software to installed called Genieo , which suppose to help with any router .
Software ask for permission to install , and about 30 % in , my instinct was telling me , there is something not right . I stop installation . Delete everything , look for any
trace in Spotlight , Library . Nothing could be find .
Now , every time I open Safari , Firefox or Chrome , it will open in my home page , but when I start looking for something in steed of Google page , there is
''search.genieo.com'' page acting like a Google . I try again to get raid of this but I can not find solution .
With more research , again using genieo.com search eng. there is lots of articles and warnings . From that I learn do not use uninstall software , because doing this will install more things where it come from.
I do have AppleCare support but its to late to phone them , so maybe there some people with knowledge , how to get this of my computer
Any help is welcome , English is my learned language , you may notice this , so I'm not that quick with the respond

Genieo definitely doesn't help with your router. It's just adware, and has no benefit to you at all. They scammed you so that they could display their ads on your computer.
To remove it, see:
http://www.thesafemac.com/arg-genieo/
Do not use the Genieo uninstaller!

Problem with rg60se router

I have problem with this router, when I connect to the internet wirelessly it works fine but when I try to connect my pc to router via cable I can't connect to the internet. maybe someone can help with this problem.

>> Posting Guide <<

Problem with Advanced Routing in WRT320N

Hi, everybody.
First of all, sorry for my poor English.
I've a problem with Advanced Routing in router. My provider using routing and it looks like that:
route add -p 172.16.2.0 mask 255.255.255.0 10.1.0.2
route add -p 172.16.5.0 mask 255.255.255.0 10.1.0.2
route add -p 10.0.0.0 mask 255.0.0.0 10.1.0.2
Everything is working well in XP (or other OS), but then I try to setup a Routing in router:
1.
2.
I'm realy tired to flashing and reflashing between 1.00.02 and 1.00.03, changing browsers, and hard reseting.
Anybody'll gimme a shot trick to my tired brains?
Solved!
Go to Solution.

1. Yes.
2. netstat:
C:\Users\dan>netstat -rn
===========================================================================
Список интерфейсов
31...........................inet
12...00 40 f4 76 95 bd ......VIA Rhine III Fast Ethernet адаптер
11...00 1d 92 2c 23 02 ......Realtek RTL8168B/8111B Family PCI-E Gigabit Ethern
et NIC (NDIS 6.20)
1...........................Software Loopback Interface 1
15...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #2
21...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #2
13...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
14...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4
19...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #3
18...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP
16...00 00 00 00 00 00 00 e0 Адаптер Microsoft 6to4 #3
20...00 00 00 00 00 00 00 e0 Адаптер Microsoft ISATAP #4
===========================================================================
IPv4 таблица маршрута
===========================================================================
Активные маршруты:
Сетевой адрес Маска сети Адрес шлюза Интерфейс Метрика
0.0.0.0 0.0.0.0 10.1.0.2 10.1.3.42 4501
0.0.0.0 0.0.0.0 On-link 91.203.178.26 21
10.0.0.0 255.0.0.0 10.1.0.2 10.1.3.42 4246
10.1.0.0 255.255.0.0 On-link 10.1.3.42 4501
10.1.3.42 255.255.255.255 On-link 10.1.3.42 4501
10.1.255.255 255.255.255.255 On-link 10.1.3.42 4501
91.203.178.26 255.255.255.255 On-link 91.203.178.26 276
127.0.0.0 255.0.0.0 On-link 127.0.0.1 4531
127.0.0.1 255.255.255.255 On-link 127.0.0.1 4531
127.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
172.16.2.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
172.16.2.10 255.255.255.255 10.1.0.2 10.1.3.42 4246
172.16.5.0 255.255.255.0 10.1.0.2 10.1.3.42 4246
224.0.0.0 240.0.0.0 On-link 127.0.0.1 4531
224.0.0.0 240.0.0.0 On-link 10.1.3.42 4502
224.0.0.0 240.0.0.0 On-link 91.203.178.26 21
255.255.255.255 255.255.255.255 On-link 127.0.0.1 4531
255.255.255.255 255.255.255.255 On-link 10.1.3.42 4501
255.255.255.255 255.255.255.255 On-link 91.203.178.26 276
===========================================================================
Постоянные маршруты:
Сетевой адрес Маска Адрес шлюза Метрика
172.16.2.0 255.255.255.0 10.1.0.2 1
172.16.5.0 255.255.255.0 10.1.0.2 1
10.0.0.0 255.0.0.0 10.1.0.2 1
===========================================================================
IPv6 таблица маршрута
===========================================================================
Активные маршруты:
Метрика Сетевой адрес Шлюз
16 1125 ::/0 2002:c058:6301::c058:6301
11 276 ::/0 fe80::f88b:9485:52cd:caaf
1 306 ::1/128 On-link
13 58 2001::/32 On-link
13 306 2001:0:4137:9e50:2846:3ccb:a434:4de5/128
On-link
16 1025 2002::/16 On-link
16 281 2002:5bcb:b21a::5bcb:b21a/128
On-link
11 276 fe80::/64 On-link
13 306 fe80::/64 On-link
13 306 fe80::2846:3ccb:a434:4de5/128
On-link
11 276 fe80::b9aa:b87b:89ea:fcdd/128
On-link
1 306 ff00::/8 On-link
13 306 ff00::/8 On-link
11 276 ff00::/8 On-link
===========================================================================
Постоянные маршруты:
Отсутствует
C:\Users\dan>
2. ipconfig:
C:\Users\dan>ipconfig /all
Настройка протокола IP для Windows
Имя компьютера . . . . . . . . . : druh
Основной DNS-суффикс . . . . . . :
Тип узла. . . . . . . . . . . . . : Гибридный
IP-маршрутизация включена . . . . : Нет
WINS-прокси включен . . . . . . . : Нет
Порядок просмотра суффиксов DNS . : mannet.lan
Адаптер PPP inet:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : inet
Физический адрес. . . . . . . . . :
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv4-адрес. . . . . . . . . . . . : 91.203.178.26(Основной)
Маска подсети . . . . . . . . . . : 255.255.255.255
Основной шлюз. . . . . . . . . : 0.0.0.0
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Включен
Ethernet adapter lanHOME:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : VIA Rhine III Fast Ethernet адаптер
Физический адрес. . . . . . . . . : 00-40-F4-76-95-BD
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Ethernet adapter 1000LAN:
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Realtek RTL8168B/8111B Family PCI-E Gigab
it Ethernet NIC (NDIS 6.20)
Физический адрес. . . . . . . . . : 00-1D-92-2C-23-02
DHCP включен. . . . . . . . . . . : Да
Автонастройка включена. . . . . . : Да
Локальный IPv6-адрес канала . . . : fe80::b9aa:b87b:89ea:fcdd%11(Основной)
IPv4-адрес. . . . . . . . . . . . : 10.1.3.42(Основной)
Маска подсети . . . . . . . . . . : 255.255.0.0
Аренда получена. . . . . . . . . . : 17 октября 2009 г. 17:37:10
Срок аренды истекает. . . . . . . . . . : 18 октября 2009 г. 17:37:09
Основной шлюз. . . . . . . . . : fe80::f88b:9485:52cd:caaf%11
10.1.0.2
DHCP-сервер. . . . . . . . . . . : 172.16.2.2
IAID DHCPv6 . . . . . . . . . . . : 234888594
DUID клиента DHCPv6 . . . . . . . : 00-01-00-01-12-43-2B-71-00-1D-92-2C-23-02
DNS-серверы. . . . . . . . . . . : 172.16.2.2
Основной WINS-сервер. . . . . . . : 172.16.2.2
NetBios через TCP/IP. . . . . . . . : Включен
Туннельный адаптер Reusable Microsoft 6To4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Reusable ISATAP Interface {543B8BBE-84D2-471B-B8FB-F73600B4A8
2B}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #2
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети* 5:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2001:0:4137:9e50:2846:3ccb:a434:4de5(Осно
вной)
Локальный IPv6-адрес канала . . . : fe80::2846:3ccb:a434:4de5%13(Основной)
Основной шлюз. . . . . . . . . :
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер 6TO4 Adapter:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.mannet.lan:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . : mannet.lan
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер isatap.{AE6B314F-94BA-478F-8751-74DEB5AB1888}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
Туннельный адаптер Подключение по локальной сети*:
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft 6to4 #3
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
IPv6-адрес. . . . . . . . . . . . : 2002:5bcb:b21a::5bcb:b21a(Основной)
Основной шлюз. . . . . . . . . : 2002:c058:6301::c058:6301
DNS-серверы. . . . . . . . . . . : 91.190.68.2
91.203.177.4
NetBios через TCP/IP. . . . . . . . : Отключен
Туннельный адаптер isatap.{8B513FFA-4355-406F-B999-1701EE42D5B9}:
Состояние среды. . . . . . . . : Среда передачи недоступна.
DNS-суффикс подключения . . . . . :
Описание. . . . . . . . . . . . . : Адаптер Microsoft ISATAP #4
Физический адрес. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP включен. . . . . . . . . . . : Нет
Автонастройка включена. . . . . . : Да
3.
4. without privider's cable:
4. with provider's cable:

Problems with linksys wireless router please help!

Me and my 2 flat mates share a wireless network, and for some reasons if cannot connect to it. I have vista home premium and a belkin dongle. We used a Linksys router to begin with, not sure which model, but we recently had to buy a new one because that did not belong to us. I can see the network so the dongle picks up the signal but every time I connect and put in the network key I either get Not close enough to the net work point (the router is about 5 meters away) The network key is incorrect (I created the password and it works on the other two people lap tops) The network has timed out. Sometimes I can connect to the network for a moment then it kicks me off. The connection wizard shows the network at full signal. I’m not sure what the problem is, I have done a full restore on my computer and the dongle was installed onto my computer via the disc it came with. I do have another dongle that is a Linksys one; however it does the same thing. Not sure what the problem is here, can anyone help before I have to go out and buy long network cable and have wires all over my flat i have a heap of work that needs doing this week so any ideas would be really helpfull

I would first try and bring your computer (if possible) closer to the connection point. That way it will have full time to connect. Also sometimes some materials in the walls mess with connections due to the type of material. Sometimes if your IP address is not quite right you will connect but then get booted offline. Sometimes if you don’t broadcast your ssid you cannot connect. (one of my Visa Networks does this ssid broadcast must be on).
Are you using WPA or WEP because Sometimes WEP is not as stable with some wireless modems/ so changing to WPA might solve your problem
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

Problem connecting to internet with linksys router after internet network password reset

I do not know the model number of the wireless linksys router offhand, but it is one known to have a bug regarding connecting the internet. Others have solved the problem by buying another model number, but the person who owns it does not want to buy a new one since he does not know how to use any other one.
What happened is our phone company (also the internet provider) was having technical problems so there no internet connection. Then, my computer opened with internet page to reset password to connect.
Although I am able to get a connection on my wireless laptop, this other person in house is unable to connect to wired computer through linksys.

Hi. WUSB300N is actually a wireless usb n adapter. A wireless receiver not a wireless access point or a router. You may want to check if you have a wireless Linksys or Cisco router there.

Persistent problems with Linksys WRT54GS Wireless Router

I'm currently running Vista with a Linksys WRT54GS router. As earlier discussed in this forum I am still having intermittent problems with the ATV taking down my network. Anyone else experienced this and come up with a sure fire fix?
When it's working I like the set up but I have to say, it is not nearly stable enough to be an everyday solution for getting my music and photos to my living room.
Thanks.

Hi, I am having the same problem -- my 2WIRE modem from AT&T recently blew up. So, I purchased the WRT54GS. As soon as I reconnected the AppleTV to the new router via a wireless connection, all of my machines (Mac and PC) lost their internet connections. I'm seriously considering going out and getting another 2WIRE.

Problems with my router cisco linksys wrt110 and my android cellphone and android table

i updated my router from 1.0 to 1.07 and one week later my phone and my tablet both with android 2.3(phone) 4.0(tablet) connect to the router wireless but don't navigate internet, they connect to google.com sometimes and if i do a search it bring it but if i try to open any of the search it doesn't open. and they connect to google play but doesn't download any app. if i open any app that needs to connect to internet it doesn't connect either. My wife has a blackberry phone and she doesn't have problem with internet connecting to the wifi router, i have a pc with windows 7 and connect wireless too and either connect to internet without problems. It's only happen with android. i download terminal app and i ping different web pages and respond by name and by ip but when i go to internet app and try to connect it doesn't bring the page. i don't have firewall and the firewall of the router i disble it but the problem persist.
i factory reset the router and my phone but problem persist. i set static ip and nothing. my cellphone and tablet connect to internet fine in others wifi routers. What else can i do? should i downgraded the firmware to the router? if it is so where can i download a previous version of the firmware and what are the steps to install it?

If the other wireless devices are working fine connected to the router, then it might be that the Android phones and tablet needed to be configured properly. Had you tried to use another web browser on the problem phone and tablet to further isolate the issue? Had you tried to connect the phone and tablet to other wireless network and check if you still have the same issue? Please try to make sure that you are connected to the router’s main wireless network. And please try to delete preferred wireless networks, including your wireless network, on the phone and then try to reconnect.
Check this link for your reference:
http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=ac433a5ab0944f4e9f43338a8dd32465_Removing_a_networ...

Issue with Linksys Router and Modem with Vonage Device

Hello,
I have a Linksys Router and Cable Modem. Plus I have Vonage for my home phone. I have been having several problems and now, my Vonage phone will not work at all. I have cable internet and my ISP is Cox Commuication. I do not know how to connect my Vonage device with my Router and Modem. People have been giving me advice, but nothing has worked.
Does anyone know how to intergrate all three of these items together? Basically which plug goes where. Currently my phone is not working. The only thing that is in use right now is my linksys cable modem. I have the power cord plugged in, the blue cord from the modem plugged into my laptop, and the cable from the modem to the wall jack. Please help. Thank-You!
Linksys Router: WRT54G version 6
Linksys Cable Modem: BEFCMU10
Vonage (Motorola): VT2143-VD
Message Edited by preshe79 on 03-16-2008 03:56 PM
Message Edited by preshe79 on 03-16-2008 03:58 PM

The router should be online first. Can you get into the router's configuration page?
The box said windows xp or better... So I installed Linux!

Problem with linksys EA2700

I've got a problem with my linksys ea2700. one time my network components get an ip-address like 192.168.x.x, the other time they get an ipaddres 10.184.x..x, I want that all my components will get the 10.184.x.x address, how can I solve this problem?

If your modem has a capability to be a DHCP server then just configure your EA2700 router as bridged. In that way, the EA2700 router will just act as a pass through device.
Setting up your Linksys Wi-Fi or Smart Wi-Fi Router to Bridge Mode

Problems with Linksys router...

Similar Messages

Maybe you are looking for