Problems with Live Update 3 and Core Center

Hi All
I have just put together the system listed below. On the first boot-up screen "Live Update 2" is displayed on the top right of screen. I installed "Live Update 3" from the Drivers & Utilities CD supplied with the Mobo. On rebooting, the computer crashes straight after loading Windows. The problem occurs even after I downloaded the latest version.
I also installed Core Center from the same CD. This works fine until I try to switch user. It then comes up with the error "No Hardware Monitor Found" and crashes. The same thing happens after downloading the latest version.
What could be causing this?
Many thanks.

Upgrade BIOS and see what happens...

Similar Messages

Neo2 defaut FSB frequency , live update and core center issues

Hi,
This is the point : i bought a brand new 915P Neo2 last week,
out of the box results : Windows XP SP2 install is OK right
now, Graphics Card is working properly but the system is
still unstable !
--> I decided to install MSI core center but while running
pc freezes !
---> tested MSI live update, packets download is working
but the tool is still unstable and pc freezes .... while testing system...
---> tested a small utility (third party) from intel website
to compute P4 target and actual frequency
this tool reports that my p4 is running at 3.24 Ghz,
I double checked and found that defaut FSB was set to 810 Mhz
even after hardreset and bios safe mode, CPU is running at 203 Mhz * 16 = 3248 Mhz
I really dont understand why reset value has been set to 203 Mhz ?? why not 200 Mhz
so MSI 915 P defaut setting is 1 % overclocking strategy ?
the bios setup is not really taken into account ??
have you ever pointed out this problem with defaut frequency ? is this a problem ?
what is your opinion regarding MSI utilities ?
I have a lot of random pc freezes, too many for this board !
all advices are welcome !!

I don't usually recommend bios updates, but you should seriously consider it if you can get the board to run stable.
Test your ram with Memtest86. This should give you an indication if you can do a flash from DOS, plus it will test the ram for you.
Try setting your FSB to 201. On the 865/875 boards that will hold the setting. 203 is typical of MSI and other manufacturers, but it really isn't high enough to be considered overclocking, and certainly isn't high enough to cause problems. But it keeps them in the race with the others when the reviewer's determine which board is best by looking at the decimal places.
You don't list your power supply data. Power and ram are the usual culprits, with heat being another.
Quote
have you ever pointed out this problem with defaut frequency ?
Who are you asking? Have you?

Still the same problem with Live update 2

I still have the same problem with Live update 2.
I've downloaded newer Bios update but it's 13 MB... it's obvious that I can not have
in floppy disk and I'm a little bit uncomfortable of updating bios from CD-rom .
But what else can I do, besides updating Bios to get out of this Live update from start-up.
Should I clear CMOS?

13mb are you really sure ?
go here instead.
http://www.msi.com.tw/program/support/bios/bos/spt_bos_detail.php?UID=436&kind=1
the download file is around 300kb.
make sure you get the right file.
you did not specify if you got L or ILRS.
also dont use live update.
get drivers from http://www.nvidia.com instead.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

Had a problem with newest update and the advice from turingtest2 resolved my problem just to say thanks! Had never used this route before so was less painful than thought it would be again thanks.

how can i find out what the fix is that works..please

Problems with windows update and fingerprint

HI
My windows was out of date and in the coarse of trying to update it, the system runned into a problem and the only way i could get back my information was to let the system settings go back to its default settings. Following that, i find it difficult to download new updates and the fingerprint is also not working any more. Please what should i do ?

Hi @CLEPRIS ,
Thank you for visiting the HP Support Forums and Welcome.It is a great site for information and questions. I have looked into your issue about your HP-ENVY m6 Notebook and issues with Windows Updates and the Fingerprint reader software. Here is a link to the HP Support Assistant if you need it. Just download and run the application and it will help with the software and drivers that might need updating on your system.
It shows me that there seems to be interference with Software task, usually your virus protection.
You might have to disable this software and then run the Windows update.
I would suggest to uninstall HP SimplePass and reinstalled the latest version for Windows 8.1.
I would be happy to assist if needed. How Do I Find My Model Number or Product Number?
I hope this fixes things up for you.
Thanks.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Live Update 3 / Core Center Neo2-FIS2R

Ever since I update to Live Update 3 (from 2) and updated to the newest version of Core Center, I've been getting error messages like "Hardware monitor not found" or "Service not started." I usually get two or three error messages. This made my computer restart erratically. When I uninstall the software it stops, and then starts again when I reinstall it, even if I install the old version.

Hello,
I had exactly the same problem !
I tried to uninstall LiveUpdate and CoreCenter, then install PCAlert4 but without success (error message like "No hardware monitor"). After that I have uninstalled PCAlert4 and installed MBM then it's works fine !
Regards,
Higgins
865 PE Neo 2 FIS2R
P4C 2,8 GHz
Antec 1080 AMG, Enermax 550w ATX EG651P-VE(FMA)
Creative Geforce4 Ti4600
2 * IBM 180GXP 80Go RAID 1
IBM 180GXP 180 Go
Seagate Barracuda 80 Go 7200 RPM
Creative Audigy 2
Corsair TWINX 2x512 Mo DDR-SDRAM PC3200 Low Latency

[915 Series] Problem with Live Update 3

I'm having a problem installing MSI's Live Update 3 on my PC. Everytime I install it and reboot the PC, the following happens: boot-up will progress normally through POST, the Windows XP Splash screen, the Welcome Screen, up through the initial load-up of my Windows desktop. But before all the system tray icons finish loading in the taskbar, I will get a blue screen of death and the PC spontaneously reboots, and the cycle will continue infinitely. I know that it is definitely the Live Update software that is causing this, because A) I can boot up into safe mode and the error does not occur until I try to manually start the Live Update software B) the error stops occuring if I (in safe mode) initiate a System Restore and go back before the point where Live Update was installed. I would like to be able to use my Live Update software if possible, but I can't get beyond this system crash with it installed. Any suggestions?

Rename or delete the ntaccess.sys file in \Program Files\MSI\Live Update 3. You will get a error when you run Live Update or Live Monitor about a service not started but just keep clicking OK and it seems to work, although I only download the files and canceled the installation. For online Live Update I think you'll find the file in \Windows\System32. Good luck.

Problem with email update and Map as well in ios6 though i am using iphone5.., problem with email update and Map as well in ios6 though i am using iphone5..

Hello.
I am having problem with my email update. i am not getting my email update in time on my iphone4 since i installed ios6. that was fine with ios5.
I brought iphone5 but still the same problem. its not shown automatically in my iphone screen whenever i get my email.
Same having big problem with imap.....
Riaz

The problem? It's actually pretty simple: Microsoft implemented their mail processing in a way that has greatly assisted folks using Microsoft products and Microsoft platforms, and established an "export" mechanism when communicating via mail in heterogeneous computing environments. Microsoft tools including Microsoft Exchange Server and their systems running Microsoft Windows are a good and very capable mail environment system, with great scale and very well integrated mail, calendar and related processing, and some exceedingly useful tools including SharePoint that have no real analog with OS X, Unix or Linux systems. But these tools don't necessarily interoperate entirely nicely in heterogeneous environments; with non-Microsoft tools and platforms.
The winmail.dat mechanism is a part of the whole Microsoft infrastructure, and particularly when the information is being "exported" out from the Microsoft environment, and into a non-Windows and non-Exchange environment. The determinate here involves the settings chosen by the various senders. (Possibly also by the defaults chosen by the administrator of the Exchange Server(s) involved, but I haven't checked that.)
Here's the Microsoft knowledge base article that describes the specificss of the winmail.dat file.
There are tools around to read the TNEF-format winmail.dat files on OS X and other platforms, including TNEF's enough for OS X, and likely various other tools. Or get your senders to reconfigure their settings for you when they're sending messages to you, as described in the Microsoft KB article.

Problem with software update and restore section in iTunes

Recently i have had this problem with iTunes. I cannot check for updates or restore. These sections have been greyed out. I have tried everything. Rebooted my device, reinstalled iTunes, downgrade iTunes, i have tried it on other computers. Nothing seems to work. Please help me out here.

For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

Problems with Live Update 2

Whenever the system starts up, I get several errors stating, "the service was not started".
Unfortunately, it doesn't state what service (although it's obviously related to Live Update because the bl**dy thing won't work) & it's not immediately evident (to me, at least) which of the plethora of un-started services I need to start to correct it.
Anyone else had this & know how to correct it?

Alright, this is really getting on my t*ts!
I haven;t changed anything &, following a re-boot, I'm now getting the "service was not started" error again once I log into Windows.
When I try to run Live Update, it gives me the same error but does actually produce the IE window, although the options for Live BIOS & Live Driver are missing (the others are still there but don't work).
I've even started EVERY service in Control Panel & I still get the same, so I'm assuming it's not so much a "service is not started", but more like a "service does not exist". If this is the case, what is the service & how do I get it back? Why doesn't re-installing Live Update solve the problem?

Off the shelf Flash chart with live update and slider?

Does anyone know of any good off the shelf Flash line chart
that has
1. Live AJAX-type update of data (without reloading entire
Flash chart)
2. Horizontal axis slider to be able to zoom in (like the
time slider on Google Finance)
I have been using
XML/SWF
chart chart but find that its live update is clunky.
Is doing a custom chart our best bet?
Thanks! Chirag

Hi,
it was a bug, corrected in patch 4.0.1 (bug 9868860), see http://www.oracle.com/technetwork/developer-tools/apex/application-express/401-patch-166923.html#BABJCAFA.
It's why it don't works with APEX 4.0.0.

Help with live updating and downgrade

Since upgrading to the latest firmware I lost the ability for my smart playlists to be updated on the fly as before. I want to restore my original firmware if possible since I don't see anything new or better with the newest firmware. Is it possible, and if so how. I see the restore function for the firmware updater but I wasn't sure if that restores the firmware too or just removes files only. TIA

you will need to restore and then update with the updater for the version you want.
Rememeber that doing a restore will erase everything on your iPod

Problem with IOS8 update and my 2013 Honda Accord

Updated my iPod touch with IOS8 and now it acts weird while connected to the stereo of my 2013 Honda Accord with a USB cable. When I start the car and set the stereo to iPod, it will grab a random song from the iTunes Library and start playing it. I can manually change the music on the iPod but the stereo display still shows the random song title and none of the stereo controls (including those on the steering wheel) will control the iPod. The random song title will stay on the stereo for a random length of time. I will be changing the music selection from the iPod and all of a sudden the stereo display will show the correct song and the radio controls will work. Something is missing here regarding the communication between the car stereo and the iPod. Anyone hear of a Honda software update to work out the bugs?

Contact Honda. Sometimes an IOS update breaks compatibility
Also sometimes this helps:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: Back up and restore your iOS device with iCloud or iTunes
- Restore to factory settings/new iOS device.

Problem with Software update and n70 Branded Tim

Excuse me just before for my no fluenty english.
I'd tried to flash my phone N70 Fw. v2.x branded 3 Italy to new version 5.x branded 3 Italy and all have finish ok, but
when i'd tried to flash my N70 fw. v3.x branded TIM to new fw 5.x the flash was ok but the Themes, the screen saver, and the multimedia button wasn't correctly installed.
When i went to change themes i can see one theme called TIMN70_2nd.skn but the option for it is delete it or exit.
If i try to delete it not work..
I want my old screen saver, desktop and theme of TIM branded
Can anyone help me?
It's a problem of firmware or Software Update?

For this me workied perfect, hope you get yours updated properly too! I just noticed this: http://discussions.europe.nokia.com/discussions/board/message?board.id=swupdate&message.id=451 Maybe it's good idea to post your product code here and retry in few days?

Problems with Yosemite update and hardrive space! How can I install and use macbook again?

I went to upload Yosemite but didnt have enough space on my hardrive. Now when I turn on my computer it tries to install - gets to about 15 minutes and then stops and says theres a problem extracting files from essential.
There isnt enough room on my hardrive to install Yosemite. I now cannot use my macbook. I cannot access any of my files, documents, apps, itunes ect. I dont know how to free up space on the hardrive when I cannot access anything.
tried to boot in safe mode but it will not let me. Stuck and unable to use computer. HELP!

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

Problems with Live Update 3 and Core Center

Similar Messages

Maybe you are looking for