Problems with Logo exported into a jpg not viewable by Dreamweaver
I have created several logos in CS4 Illustrator and exported them to into a jpg. However, when I am creating my website using CS4 Dreamweaver and try and place the image, it comes up as a blank file logo. I can load other jpgs not created by me so must be something to do with the file.
Second question, I need to reduce the size of the logo so it may fit into a software package for billing purposes. The size must be 325(w) x 110(h), again it won't read the jpg, but it will read a bmp. However, the bmp is so grainy it is not worth putting on the bill it looks so bad. How do I shrink the image down and still maintain the clarity?
Thank you.
xjds wrote:
Scott,
Thank you for the reply. Is your suggestion for the Dreamweaver fix or the resolution problem?
Regards,
John
My suggestions are related to the actual file name.. regardless of what app you are using or how the image was exported.
It's entirely possible that a file named "This_is_My_Really_Really_Long_Superfluous_File_Name_.jpg" is the problem. When "My_File.jpg" will work just fine.
Same holds true for "This is my file.jpg" compared to "Thisismyfile.jpg" (no spaces).
Just rename the files and try again in Dreamweaver.
Similar Messages
-
I can't figure it out. After updating photoshop from the c6 version to the newer cc, and after also an update to lightroom through my creative cloud app, all photos exported now from lightroom into photoshop are extremely noisy and poor quality. I have adjusting settings I thought to back where I had them, but the images still don't look right. Can you help me? Slammed with photos to edit for paid gigs! Panicking. These are raw files.
My interpretation of what the OP’s situation, that they are adjusting noise-reduction and sharpening to their liking in LR, the using Edit In PS (not Exporting despite using that word) into PS and what they see in PS is much nosier than what they saw in LR and are wondering why things look different between LR and PS.
My guess as to the problem is that they’re adjusting LR-Detail settings (Sharpness and NR) using Fit zoom instead of 1:1 zoom and then viewing the image in PS, perhaps at 1:1 zoom or even at Fit-to-Window zoom in PS, and that LR’s resampling and PS’s resampling of the image for fitting to the screen are a bit different and PS’s looks rougher.
Unless the OP is comparing LR and PS at 1:1 or 100% zoom, differences are to be expected. -
Problems with Writable PDFs and MACS - content not viewable unless clicked on
I am having problems viewing documents in Adobe Reader 9. Students are downloading a writable PDF from our system, saving it with content, then uploading it back to the system. All Mac users' documents are coming back blank unless clicked on. For some reason, all Mac PDF's are appearing blank until each individual field is clicked on. Once you click a field, the information shows up until you click another field then the information disappears in the old field and shows up in the new field.
We really need to be able to view and print these documents so if anyone knows of a quick fix please let me know! We are trying to print all of the applications tomorrow.This is due to Apple's improper handling of pdf files with its Preview Application. This will not happen if your users use Adobe Reader. You can find a fix for individual files here: http://kb2.adobe.com/community/publishing/885/cpsid_88564.html
-
Facing problem with logo in the PDF attachment when sending mail...
hi friends,
i'm facing problem with logo in the PDF attachment to the mail.
my requirement:
1. enter spool number and mail id in the selection screen.
process:
1. now the program will fetch the spool data and converts it to PDF.
2. but when i'm trying to send mail with this PDF as attachment.
when i open the PDF file from the mail, logo is not coming properly (looks disturbed).
can anyone help me how to resolve this issue...
thanks in advance, murashali.hi dinakar, thanks for your mail...
logo looks good in spool/script/smartform.
even it look good when i download this spool to pdf and to the presentation server as pdf file.
i'm using CONVERT_OTFSPOOLJOB_2_PDF.
when i used CONVERT_ABAPSPOOLJOB_2_PDF, is gives a msg - 'spool number not found'.
here i'm using folloing code to pass pdf to the function module: SO_NEW_DOCUMENT_ATT_SEND_API1.
code:
Transfer the 132-long strings to 255-long strings
lt_mtab_pdf[] = pdf[].
LOOP AT lt_mtab_pdf INTO lwa_mtab_pdf.
TRANSLATE lwa_mtab_pdf USING ' ~'.
CONCATENATE lv_gd_buffer lwa_mtab_pdf INTO lv_gd_buffer.
CLEAR lwa_mtab_pdf.
ENDLOOP.
TRANSLATE lv_gd_buffer USING '~ '.
DO.
lwa_mess_att = lv_gd_buffer.
APPEND lwa_mess_att TO lt_mess_att.
CLEAR lwa_mess_att.
SHIFT lv_gd_buffer LEFT BY 255 PLACES.
IF lv_gd_buffer IS INITIAL.
EXIT.
ENDIF.
ENDDO.
NOTE: problem i believe is with ''. i'm getting this tilt symbol () in my pdf internal table. here in the above code the line TRANSLATE lv_gd_buffer USING '~ ' is changing the existing tilt to space. so my logo is getting disturbed.
even i tried with REPLACE this tilt with other char, but it doent work.
can you give any idea... -
Many problems with the 'Export to Text' (.txt) in CR Xi
Hi,
I have listed many problems with the 'Export to Text' (.txt) function of CR Xi.
These problems are related to this export format only (meaning everything works fine in the Viewer or in the 'Export to PDF')...
- Multi-columns layout do not export as Multi-column (export only a one column);
- Numeric values with parenthesis for negative values or with a fix currency sign at the leftmost position are not exported correctly;
- Fields having a Suppress formula which is "WhilePrintingRecords" do not appears when exported;
- Fields with 'Suppress double value' checked are not always suppressed when exported to Text.
- 'Keep Group Together' flag is not working.
- 'Reset Page Number After' simply does not works when exported to text;
- 'Keep object together' on TextBox/Section is not working.
- Whenever a group is ending on the last line of a page, the the following page as the same Group header as the previous group with no records until the page is filled, then the PageBreak and PageHeader is missing but the records of the following group appears.
I would like to know what is the status of the 'Export to Text' function (is it a deprecated function not supported anymore???).
If still supported, when will these bugs be fixed???
ThanksHi Rene
Export to Text is supported till date. Crystal Reports 2008 also supports this with Keep together working however when I tried with format with multiple columns, it didnot show up in the exported text file.
Regards
Sourashree -
Problems with importing images into Lightroom cc
Problems with importing images into Lightroom cc
I have installed lightroom cc and having trouble imortera images from my Canon 1DX.
Lightroom starting the capture, but then nothing happens more, if I turn off the camera, I get error message photo 100-200 could not be loaded.
Now I have left lightroom 5 and where the input port works fine.
What happened to the upgrade from Lightroom 5 to lightroom cc?
The camera has the latest software.I've now tested in various ways.
First, I have images on both memory cards in the camera.
Test1) Selects Not all of the photos in the camera at the input port bearings, it seems to work fine.
Test 2) selects all cards in the camera and then get the following, Lightroom starts inportera short but stops and nothing happens (Fig.1).
I turn the camera off after a while and get the next meddelnade (picture 1)
Which can be translated:
"The following files were not imported because they could not read (351)
Property 1-100
etc. "
Picture 1.
Picture 2 -
Hi ...
I have a problem with my ipod touch:
I can not activate my ipod with my Apple ID, it tells me that my account can not activate this device, but my apple ID is OK.
The proposed me as ipod help entering previous credentials, but the ipod is mine from the beginning, in fact I have my ballot, not bought down to another user.
Actually I do not know how to activate it in Chile were unable Store MacOnline solve my problem, it is for this reason that I am writing to see if someone can help me.
PLEAAASEEE
Thank you.
SebastianThanks for your answer.
actually, my ipod will not let me activate it with apple id, this happened when the new iOS acutalizó understand that has more security, but do not know what to do. -
when i try to update my itunes on my pc i keep getting the messaage that there was a problem with the installer and it could not finish. how do i fix this? i`ve tried to download 3 times already.
Hi
I've got a similar problem. iTunes v10.2 worked fine, but when I tried to update it to 10.5 I got a 'Bonjour' error. I eventually solved that but I still couldn't upgrade to 10.5, so I deleted every single Apple, Quicktime, iTunes, etc file on my PC using Revo Unistaller (because the normal Windows Add/Delete programs wouldn't work) but now, when I install the latest iTunes version from scratch (on XP SP3), it says: "the installer encountered errors before it could be configured.... your system has not been modified"
Any ideas?
Rick -
I have a problem with my ipod touch it does not light at all, what should I do?
I have a problem with my ipod touch it does not light at all, what should I do?
Try the troubleshooting here for your specific symptom:
iPod touch: Hardware troubleshooting -
There is a problem with my apple watch.it is not working well .There is a problem in its charging .The repairers says that contact to your company and ask them to provide you its software.
Please help me.Please be aware that you are not communicating with Apple when you post in these forums. These are user-to-user support forums, so in almost all cases the only people who will reply to your posts are, like me, your fellow users.
As to your issue, Apple does not and never has made a wristwatch as such. The only thing close to a watch that they have made was the 6th-generation iPod nano:
http://support.apple.com/kb/ht1353#iPod_Nano_6G
which has a clock feature and which some people have worn as a wristwatch. Is that what you mean?
Message was edited by: varjak paw -
i have problem with Cellular data network it is not apearing in iphone setting so help me how to bring this option in iphone
What brand/model USB drive? Is it bus or AC powered?
On Mail...
First Quit Mail, then I'd backup these two Mail folders, by right clicking on them in the Finder, then choose Archive/Compress.
Users/YourUserName/Library/Mail
Users/YourUserName/Library/Mail Downloads
(Could be a different folder here if you chose such in Mail Prefs)
Right click on that Mail folder, choose archive, you'll get everything in the folder, and the folder itself in a file called Mail.zip, move it to a safe place, same for the Mail Downloads folder... only the plist is separate.
/Users/YourUserName/Library/Preferences/com.apple.mail.plist -
I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.
I have a MacBook Pro that I bought almost a year ago, next day problems with the hard disc that could not be diagnosed by the service, after 3 months they realized it and changed it with a new one, after 3-4 months heated and shut down by itself and dont work anymore. From apple say even a year has not passed it is not under garancy and I should pay to fix it without ans issue.
-
Problem with OLAP SAPBI SHOWING Server in not responding
Hi All,
Problem with OLAP SAPBI SHOWING Server in not responding
SBO0001)",
Iam Creating a universe , When iam Retriving my olap cube query it showing the error "Server in not responding (SBO0001)",
Thanks In advance
Praveen Kumar YagnamurthyI am receiving this same error. I have these additional details:
CS: COM Provider CLSID not specified or erroneous
In my case, this is for a universe that I created in BOE XI R2 sp5.4 and migrated up to BOE XI 3.2 sp2. This connection uses OLEDB. I have the same situation with another universe that I migrated over that uses an ODBC connection and it works fine.
In my case, I am not using OLAP. -
i am having a problem with my iphone 4s. it is not displaying its volume bar in music or anywhere when not connected to earphones. kindly help me with its volume settings.
Have you tried the restart/reset/restore troubleshooting path? That would be the best initial set of steps to take, particularly in a situation like this.
-
Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?
Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best
Maybe you are looking for
-
Should I buy a Mac Mini (new or refurbished)?
Wasn't sure if this was the correct place to make this post. If not, please accept my apologies... I have a 5-year-old Dell desktop with a 40GB HD and Windows XP. Am sure the HD will give up the ghost one of these days. I had put more memory (1GB) in
-
I have a Mac Mini and an HP Photosmart 6510 wireless printer - I want to print a Pages document in a single color instead of the usual black - how to do this ?
-
Where are Print Presets in Photoshop (CC 2014)?
Where are print presets in Photoshop? (I'm using CC 2014 but the question applies to earlier versions as well.) I don't see them anywhere. Illustrator has had them for an eternity -- where you can set paper size, printer type, color settings, magnif
-
Hello Everyone, im using Orc Express 10g, in windows XP My question : Im trying to insert some values with an script and im getting an error .. After i ran this script : INSERT INTO MY_EMPLOYEE (ID, LAST_NAME,FIRST_NAME , USERID, SALARY) VALUES (&ID
-
ICloud imap server rejects my password
Hi does anyone know how to stop the server from not accepting my password