Problems with Lookups

Hi all!!
I'm developing with Workflow Builder some notifications, where the user can select an organization unit from a list of 400 values.
I found some problems in the creation of this list, cause I cant see about 200 values, even if in the db table WF_LOOKUPS_TL i have all the organization units!!
My question is : is it possible to set either the buffer size or something else to put the limit of this list at a higher value?! in order to see all the list and not only a part of it??
P.S.: I'm using db 10g with workflow builder 2.6.3 and eb-suite 11.5.10
Thanks all for your attention
Jacopo ;)

Can you please elaborate on the requirement? I am not sure if you should be using Workflow Lookups or FND Lookups. Workflow lookups are basically used as Result within Response required Workflow Activities. Where are you trying to view these list of organizations that 200 is missing?

Similar Messages

Other Problem with lookup

What can i do in this situation? (I use Sun Application Server 8.1) :
In this piece of code in a ejb test client:
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, "com.sun.jndi.cosnaming.CNCtxFactory");
env.put(Context.PROVIDER_URL, "iiop://127.0.0.1:4700");
//get naming context
Context context = new InitialContext(env);
//look up jndi name
Object ref = context.lookup("JNDIName");I have an error in a lookup, and i tried ejb/JNDIName, java:comp/env/ejb/JNDIName but ... the error is in all situations:
javax.naming.NameNotFoundException [Root exception is org.omg.CosNaming.NamingContextPackage.NotFound: IDL:omg.org/CosNaming/NamingContext/NotFound:1.0]
     at com.sun.jndi.cosnaming.ExceptionMapper.mapException(ExceptionMapper.java:44)
     at com.sun.jndi.cosnaming.CNCtx.callResolve(CNCtx.java:453)
     at com.sun.jndi.cosnaming.CNCtx.lookup(CNCtx.java:492)-- Failed initializing bean access.
Thanks

Originally posted by: mikhailk.qnx.com
The debugger retrieves the name of the source file from the debug
information associated with the current stack frame. Check if the file name
can be found in the source lookup path.
"Sheldon" <[email protected]> wrote in message
news:31a9c281623f66e5ba98901be99b5ec0$[email protected]..
> Hi all
>
> I am having a problem with step over in the my integrated
> debugger, when i press step over an editor pops up saying no source found
> with a button attached to it. I am trying to solve the problem, i need
> some help as to where in the source i could look to solve this problem. I
> also want to know for sure whether this is a problem with source lookup or
> due to some other reason.
>
> regards,
> Sheldon
>

Problem with lookup xref not happening Properly

Hi All,
we are facing an issue in lookup xref.
Sometimes the lookup xref happens correctly and sometimes we get empty value from lookup xref even if the xref table has data properly populated.
Check the below 2 cases.
CASE-A:
This mainly happens in the following scenario:
BPEL A (Populate xref with itemid)------------> ESB ---------->BPEL B (lookup the itemid from the same xref)
1)     The xref table is populated in a BPEL process A.
2)     Payload passes through ESB and reaches BPEL B.
3)     In Process B, we try to look up the same value populated in BPEL A, although the data is inserted in lookup table, it did not get committed to DB as it is a single flow.
This issue is occuring intermittently due to which the entire process is failing.
Hence , Request you to let us know how can this issue will be resolved.
CASE-B:
Where as Lookup works properly in the following scenario:
BPEL C (Populate xref with itemid)<---> BPEL A----------> ESB ---------->BPEL B (lookup the itemid from the same xref)
1)     BPEL A calls BPEL C.
2)     The xref table is populated in a BPEL process C.
3)     Control comes back to BPEL A.
4)     Payload passes through ESB and reaches BPEL B.
5)     In Process B, we try to look up the same value populated in BPEL C, now the data gets committed.
We are facing issue with Case-A due to which the entire process is failing. Hence, Request you to let us know how can it will get resolved.
Thanks
Narendra
Mailto: [email protected]

Hi Narendra,
Are you still having this problem?
Just in case you are:
Please check the descriptor properties of the ABCS processes
Are they async or sync? If 'sync' make them transaction 'required'.
Cause: The lookup fails at Provider because there is no data in the XREF_DATA (or ur custom xref table).
The ReqABCS is inserting data into the table but actually will not Commit it until the Provider has successfully completed.
If the processes are async or have a savepoint then you should be able to see the data in the xref even before the ProvABCS call and the problem shouldnt occur; however if its sync then all the processes must be in a single transaction for xref data to be "visible" at ProvABCS.
--thanks
debashis

Problem with lookup query in clustered enviornment!!!

Hi,
I have a lookup query in object form which will bring all users in OIM. It works fine on Standalone. But what I really dont understand is that when I use the same lookup in clustered enviornment(weblogic cluster and oracle DB cluster) it doesnt work. it brings up empty lookup.
My lookup query is configured with the following properties:
Defined field in object form
- LookupQuery, Select usr_login, usr_first_name, usr_last_name from usr
- Column options, User ID,First Name,Last Name
- Column Names,usr_login,usr_first_name,usr_last_name
- Lookup column name, usr_login
- Column width, 10,100
Thanks,
doki
Edited by: doki.prasad on Jun 9, 2009 11:25 AM

Did you resolve this issue? I see a similar problem
Thanks.

Problem with lookup-table and single quotes

SOA Suite 10.1.3.3. I have an ESB project with an XSLT map that uses orcl:lookup-table to translate values. I use this instead of lookup-dvm because I want non-IT users to manage the mappings without having access to the ESB Console.
According to the doco:-
G.1.79 lookup-table
orcl:lookup-table(table, inputColumn, key, outputColumn, datasource)
This function returns a string based on the SQL query generated from the parameters.
The string is obtained by executing:
SELECT outputColumn FROM table WHERE inputColumn = key
The problem I'm having is that it seems if "key" contains a single quote (i.e an apostrophe), then lookup-table fails to find the corresponding value - even though the value in table.inputColumn also contains the single quote.
I've put the incoming into an XSL variable, but to no avail.
<xsl:variable name="incoming">
<xsl:value-of select="/obj1:DEV_MESSAGE_TYP/DATA1"/>
</xsl:variable>
<xsl:variable name="dvm-text">
<xsl:value-of select="orcl:lookup-table('MYTABLE','INVAL',$incoming,'OUTVAL','ds/dev')"/>
</xsl:variable>
Are there any XSLT Gurus out there that have come across this or can think of ways around it?
Thanks in advance...
Regards,
Greg

Ok - the above was on the right track but wasn't 100% because it can't handle more than 1 single quote (apostrophe) in the input to lookup-table.
I've since found a better solution - an XSLT re-usable template that operates recursively and so can replace multiple occurances of single quotes. I've modified it to handle a null input value, otherwise lookup-table will just return the value of the first row in the lookup table - doh! The way I've done it below, if null is passed in, then null will be returned.
This goes at the top of your XSLT map file...

<xsl:template name="replace-string">
<xsl:param name="text"/>
<xsl:param name="from"/>
<xsl:param name="to"/>
<xsl:choose>
<xsl:when test="contains($text, $from)">
     <xsl:variable name="before" select="substring-before($text, $from)"/>
     <xsl:variable name="after" select="substring-after($text, $from)"/>
     <xsl:value-of select="$before"/>
     <xsl:value-of select="$to"/>
<xsl:call-template name="replace-string">
<xsl:with-param name="text" select="$after"/>
<xsl:with-param name="from" select="$from"/>
<xsl:with-param name="to" select="$to"/>
     </xsl:call-template>
</xsl:when>
<xsl:when test="$text=''">NULL</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$text"/>
</xsl:otherwise>
</xsl:choose>
</xsl:template>
Then you call it from within the XSLT map as follows:-

<xsl:variable name="incoming">
<xsl:call-template name="replace-string">
<xsl:with-param name="text" select="inp1:myinputfield"/>
<xsl:with-param name="from">'</xsl:with-param>
<xsl:with-param name="to" select="'&apos;&apos;'"/>
</xsl:call-template>
</xsl:variable>
<xsl:variable name="dvm-text">
<xsl:value-of select="orcl:lookup-table('MYLOOKUPTABLE','INVAL',$incoming,'OUTVAL','ds/dev')"/>
</xsl:variable>

<xsl:choose>
<xsl:when test="$dvm-text=''">
<xsl:value-of select="inp1:myinputfield"/>
</xsl:when>
<xsl:otherwise>
<xsl:value-of select="$dvm-text"/>
</xsl:otherwise>
</xsl:choose>
Much Thanks to everyone who shares information and methods on the Internet!
Cheers,
Greg

Problems with lookup query

Hi all,
I added a lookup query in a form.
The query is:
select lkv_encoded ,lkv_decoded from lookup_ad_folder_vw where lkv_encoded not in (select encoded from ad_folder_vw where usr_login = '$Requester Information.User Login$')
I need to filter by the beneficiary's username.
This query works if the request is a self-service request. But if it is requested by other people, it doesn't work. Because the parameter "$Requester Information.User Login$" gets the requester login.
My question is the follwing:
How can I get the beneficiary's username?
Are there any workaround for this?
Thanks,
Ariel

As this looks moreover like a Object Form, so their is nothing you can do in this query to get the Beneficiary's username. The reason is simple that you can select multiple target users in the same request with the same Object Form and OIM in that case would not be aware as to which information from all the beneficiaries should be supplied.
If this would have been a Process Form then individual beneficiary username could directly be mapped as every user would have its own sub-thread in that case during provisioning.
Thanks
SRS

Problem with lookup value by CAML query.

I just cannot figure out what is wrong with my code that the query does not filter any item. It returns all items in the list. The RowLimit does work so I know the query is used. I wish someone can point out what is wrong in the query. Many thanks.
SPList tList = cWeb.Lists[listName];
SPQuery LookupQuery =
new
SPQuery();
//LookupQuery.RowLimit = 5;
LookupQuery.Query =
"<Query><Where><Eq><FieldRef Name='ItemStatus' /><Value Type='Text'>New</Value></Eq></Where></Query>";
SPListItemCollection iColl = tList.GetItems(LookupQuery);
int n = iColl.Count;

Try removing the starting and ending <Query> tags. Your CAML query assignment should look like below
LookupQuery.Query = "<Where><Eq><FieldRef Name='ItemStatus' /><Value Type='Text'>New</Value></Eq></Where>";
Ram Prasad Meenavalli | MCITP | MCTS SharePoint | MCPD SharePoint | http://www.spdeveloper.co.in

Real Time Simulation, problem with the 3D Lookup table

Hello,
I have a problem with LabVIEW RT. I want to read under the parameters of temperature, time and voltage, the current out of a matrix.
The matrices differ only in the temperature (first entry in a matrix).
If the 3D Lookup table only get one matrix, I often get "Not a Number" as result. But not always, although the parameters remain the same.
If the 3D Lookup table gets three or more matrices, the result never be "Not a Number". But the 2 other matrices are "dummys" filled up with zeros, expect the temperature. Also the problem appears only if I start the test sequence as Startup on the RT-System. If I start the test sequence from the Front Panel, the 3D Lookup table works well, whether one or more than three matrices!
Its confusing, I know ^^
The appendices contains pictures from a matrix an from the Block Diagram
Attachments:
Block DIagram.jpg ‏146 KB
Current-Matrix.png ‏27 KB
Dummy-Matrix.png ‏12 KB

Hello salomon,
The 3D lookup table is not generated in my code, but is invoked as a constant. I examine the behavior of electrical loads in the cars. Consumers were in a climate chamber measured at various temperatures and these values were packed into a 3D lookup.
Helps you even further? : D

Performance problem with many lookups

Hello,
In my corporate system, I have a database table with many relationships. The JHeadstart Group used to represent it has 13 lookups, some of them are choices and some are lovs. All lookups are based on "free" lookup VOs, withou any kind of View Link relationships.
So the initial model was:
One "main" view object representing one entity object, with many (13) lookups to set some attributes.
It was just working fine while under development, but when we put it on production servers with real data, it started running very very slow when quering in the main UIX table. In create mode it was working fine. I realized that it could be all of those lookups with all that data (some of lookup tables has >300 entries). If I undestood correctly, those attributes associated with lookups are "rendered" by matching.
So I changed the model to:
One "main" view object representing all possible entity objects, to fetch all attributes coming from relationships directly in that view object, and many lookups used just in create mode.
It worked fine, and now response times are acceptable. But I'm still with difficult in the detail disclousure feature, where I'm still gettting up to 15-20s to render the details. In detail disclousure, I think it uses lookups to render attributes and so it slow down again.
Is there anything I can do do speed up these queries?
Thanks,
Eduardo

I've changed some choices to lovs and now it's working fine.
Eduardo

Problem with logging in to apex application builder listener

I have problem with my settings and am posting this in hope that someone else out there had similar problem and solved it!
I am trying to use reverseproxy to access to our db through apex listener.
It's been all set-up and I can login to the application it self either through proxy or no proxy using the listener.
But when I try to login to apex application builder I cannot do it through proxy(with no proxy, it works).
It just refreshes the login page when I click login....
I tried to upgrade the listener to the latest v1.1(using 1.0.2) but it causes my tomcat to crash...
So solution i am looking for is how to make logging in work through proxy..
In the firebug it is showing that below and few other request status as 302 moved temporariry
http://myserver:8080/testsin/apex/wwv_flow.accept
Where as with no proxy it is saying Found.....
Any thoughts??
Thanks
Sin K

Hello Sin K,
so proxy and Tomcat are located on different machines as well? Is the proxy able to commuicate with the Tomcat on the configured internal ports and is the proxy able to lookup the hostname you configured for the Tomcat?
For the connector, the proxyName and proxyPort should be the parameters the client uses to call APEX. So if your clients should call via http://proxyserver:8080/testsin/apex the settings would be
proxyName=proxyserver
proxyPort=8080Reason for this is that applications (e.g. the APEX Listener) generate there URL references with these parameters.
But does your proxy actually serve on port 8080? And is that port accessible by clients? Do clients accept cookies from that server?
In my case, there is only one 302 which redirects to http://host:port/apex/f?p=4500:1000:sessionid which is correct.
If you look into your first post request in firebug, what's in the request header?
-Udo

Remote Delta link setup problem with Bean / Access Service

Hello,
I am trying to setup Remote Delta Link (RDL) between two portals. (Both portals same version - EP 7.0 EHP1 SP 05 - are in the same domain)
I already have the Remote Role Assignment working without any issues.
The following have been done successfully:
1. Same user repository has been setup for both the portals
2. Setup trust between producer and consumer (SSO working fine)
3. Producer added and registered succesfully on consumer
4. Permissions setup on producer and consumer
4. pcd_service user with required UME actions setup
I am able to see all the remote content in the Consumer portal.
When I try to copy the remote content and paste it as local content, I am getting the following error:
Could not create remote delta link to object 'page id'. Could not connect to the remote portal. The remote portal may be down, there may be a network problem, or your connection settings to the remote portal may be configured incorrectly.
After increasing the log severity, I am able to see the following in Default Trace:
com.sap.portal.fpn.transport.Trying to lookup access service (P4-RMI) for connecting to producer 'ess_int' with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
com.sap.portal.fpn.transport.Unable to lookup access service (P4-RMI) with information: com.sap.portal.fpn.remote.AccessServiceInformation@31c92207[connectionURL=hostname.mycompany.com:50004, shouldUseSSL=false, RemoteName=AccessService]
AbstractAdvancedOperation.handleDirOperationException
[EXCEPTION]
com.sap.portal.pcm.admin.exceptions.DirOperationFailedException: Could not retrieve the bean / access service to connect with producer
Could not retrieve the bean / access service to connect with producer
Like you can see above, there is some bean / access service which is not retrieved successfully. I am not sure if this is a permission problem on the consumer.
I have checked that the P4 ports are configured correctly (standard - not changed) and I am able to telnet from producer to consumer (and vice versa) on the P4 port.
I am stuck at this point and am not able to find any information on this.
I would really appreciate if some one can point me in the right direction.
Thank you for reading.
- Raj

Hi Raj,
Please check your config of the P4 port on the producer. Is it really 50004 (check SystemInfo of the producer)?
I do think there's a problem with the P4 communication since RDL requires P4 connection.
Do you have load balanced consumer-producer connection? Please refer to this blog for further details
Little known ways to create a load balanced Consumer Producer connection in a FPN scenario
Regards,
Dao

Problem with htmldb 2 (Sorry APEX)!

I installed htmldb 2 on a windows XP, Oracle 10gR1 (which has enhanced by companion CD downloaded form Oracle's site). Everything went OK but when I want to connect to it by this url: http://localhost:7777/pls/htmldb it takes my username,pass but says:
"Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-HTTP-Server/1.3.28 Server at localhost Port 7777"
I noticed many differences between my installed Apache and documents of htmldb. I run a 9.0.4.0.0 Apache server and the dads.conf and httpd.conf are as following:
# ============================================================================
# mod_plsql DAD Configuration File
# ============================================================================
# 1. Please refer to dads.README for a description of this file
# ============================================================================
# Note: This file should typically be included in your plsql.conf file with
# the "include" directive.
# Hint: You can look at some sample DADs in the dads.README file
# ============================================================================
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Location /pls/htmldb>
SetHandler pls_handler
Order deny,allow
Allow from all
AllowOverride None
PlsqlDatabaseUsername HTMLDB_PUBLIC_USER
PlsqlDatabasePassword @BI+fAonVS+7xU8G04irVINWznM6s+A9fuQ==
PlsqlDatabaseConnectString chagh
PlsqlDefaultPage htmldb
PlsqlDocumentTablename wwv_flow_file_objects$
PlsqlDocumentPath docs
PlsqlDocumentProcedure wwv_flow_file_mgr.process_download
PlsqlAuthenticationMode Basic
PlsqlNLSLanguage AMERICAN_AMERICA.AL32UTF8
</Location>
# Based upon the NCSA server configuration files originally by Rob McCool.
# This is the main Apache server configuration file. It contains the
# configuration directives that give the server its instructions.
# See <URL:http://www.apache.org/docs/> for detailed information about
# the directives.
# Do NOT simply read the instructions in here without understanding
# what they do. They're here only as hints or reminders. If you are unsure
# consult the online docs. You have been warned.
# After this file is processed, the server will look for and process
# E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/srm.conf and then E:\oracle\product\10.1.0\Companion\Apache\Apache/conf/access.conf
# unless you have overridden these with ResourceConfig and/or
# AccessConfig directives here.
# The configuration directives are grouped into three basic sections:
# 1. Directives that control the operation of the Apache server process as a
# whole (the 'global environment').
# 2. Directives that define the parameters of the 'main' or 'default' server,
# which responds to requests that aren't handled by a virtual host.
# These directives also provide default values for the settings
# of all virtual hosts.
# 3. Settings for virtual hosts, which allow Web requests to be sent to
# different IP addresses or hostnames and have them handled by the
# same Apache server process.
# Configuration and logfile names: If the filenames you specify for many
# of the server's control files begin with "/" (or "drive:/" for Win32), the
# server will use that explicit path. If the filenames do not begin
# with "/", the value of ServerRoot is prepended -- so "logs/foo.log"
# with ServerRoot set to "E:\oracle\product\10.1.0\Companion\Apache\Apache" will be interpreted by the
# server as "E:\oracle\product\10.1.0\Companion\Apache\Apache/logs/foo.log".
# NOTE: Where filenames are specified, you must use forward slashes
# instead of backslashes (e.g., "c:/apache" instead of "c:\apache").
# If a drive letter is omitted, the drive on which Apache.exe is located
# will be used by default. It is recommended that you always supply
# an explicit drive letter in absolute paths, however, to avoid
# confusion.
### Section 1: Global Environment
# The directives in this section affect the overall operation of Apache,
# such as the number of concurrent requests it can handle or where it
# can find its configuration files.
# ServerType is either inetd, or standalone. Inetd mode is only supported on
# Unix platforms.
ServerType standalone
# ServerRoot: The top of the directory tree under which the server's
# configuration, error, and log files are kept.
# Do NOT add a slash at the end of the directory path.
ServerRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache"
# PidFile: The file in which the server should record its process
# identification number when it starts.
PidFile logs/httpd.pid
# ScoreBoardFile: File used to store internal server process information.
# Not all architectures require this. But if yours does (you'll know because
# this file will be created when you run Apache) then you must ensure that
# no two invocations of Apache share the same scoreboard file.
ScoreBoardFile logs/httpd.scoreboard
# In the standard configuration, the server will process httpd.conf (this
# file, specified by the -f command line option), srm.conf, and access.conf
# in that order. The latter two files are now distributed empty, as it is
# recommended that all directives be kept in a single file for simplicity.
# The commented-out values below are the built-in defaults. You can have the
# server ignore these files altogether by using "/dev/null" (for Unix) or
# "nul" (for Win32) for the arguments to the directives.
#ResourceConfig conf/srm.conf
#AccessConfig conf/access.conf
# Timeout: The number of seconds before receives and sends time out.
Timeout 300
# SendBufferSize: controls setsockopt() call made to set send buffer size on
# all sockets. Default OS value on most Windows platforms is too small.
# Larger values can help if the average page size served by OHS is
# large (~64 k)
SendBufferSize 16384
# KeepAlive: Whether or not to allow persistent connections (more than
# one request per connection). Set to "Off" to deactivate.
KeepAlive On
# MaxKeepAliveRequests: The maximum number of requests to allow
# during a persistent connection. Set to 0 to allow an unlimited amount.
# We recommend you leave this number high, for maximum performance.
MaxKeepAliveRequests 100
# KeepAliveTimeout: Number of seconds to wait for the next request from the
# same client on the same connection.
KeepAliveTimeout 15
# Apache on Win32 always creates one child process to handle requests. If it
# dies, another child process is created automatically. Within the child
# process multiple threads handle incoming requests. The next two
# directives control the behaviour of the threads and processes.
# MaxRequestsPerChild: the number of requests each child process is
# allowed to process before the child dies. The child will exit so
# as to avoid problems after prolonged use when Apache (and maybe the
# libraries it uses) leak memory or other resources. On most systems, this
# isn't really needed, but a few (such as Solaris) do have notable leaks
# in the libraries. For Win32, set this value to zero (unlimited)
# unless advised otherwise.
# NOTE: This value does not include keepalive requests after the initial
# request per connection. For example, if a child process handles
# an initial request and 10 subsequent "keptalive" requests, it
# would only count as 1 request towards this limit.
MaxRequestsPerChild 0
# Number of concurrent threads (i.e., requests) the server will allow.
# Set this value according to the responsiveness of the server (more
# requests active at once means they're all handled more slowly) and
# the amount of system resources you'll allow the server to consume.
ThreadsPerChild 50
# Server-pool size regulation. Rather than making you guess how many
# server processes you need, Apache dynamically adapts to the load it
# sees --- that is, it tries to maintain enough server processes to
# handle the current load, plus a few spare servers to handle transient
# load spikes (e.g., multiple simultaneous requests from a single
# Netscape browser).
# It does this by periodically checking how many servers are waiting
# for a request. If there are fewer than MinSpareServers, it creates
# a new spare. If there are more than MaxSpareServers, some of the
# spares die off. The default values are probably OK for most sites.
#MinSpareServers 5
#MaxSpareServers 20
# Limit on total number of servers running, i.e., limit on the number
# of clients who can simultaneously connect --- if this limit is ever
# reached, clients will be LOCKED OUT, so it should NOT BE SET TOO LOW.
# It is intended mainly as a brake to keep a runaway server from taking
# the system with it as it spirals down...
#MaxClients 150
# Listen: Allows you to bind Apache to specific IP addresses and/or
# ports, in addition to the default. See also the <VirtualHost>
# directive.
#Listen 3000
#Listen 12.34.56.78:80
# BindAddress: You can support virtual hosts with this option. This directive
# is used to tell the server which IP address to listen to. It can either
# contain "*", an IP address, or a fully qualified Internet domain name.
# See also the <VirtualHost> and Listen directives.
#BindAddress *
# Dynamic Shared Object (DSO) Support
# To be able to use the functionality of a module which was built as a DSO you
# have to place corresponding `LoadModule' lines at this location so the
# directives contained in it are actually available before they are used.
# Please read the file README.DSO in the Apache 1.3 distribution for more
# details about the DSO mechanism and run `apache -l' for the list of already
# built-in (statically linked and thus always available) modules in your Apache
# binary.
# Note: The order in which modules are loaded is important. Don't change
# the order below without expert advice.
# Example:
# LoadModule foo_module libexec/mod_foo.dll
LoadModule mime_magic_module      modules/ApacheModuleMimeMagic.dll
LoadModule mime_module          modules/ApacheModuleMime.dll
LoadModule dbm_auth_module     modules/ApacheModuleAuthDBM.dll
LoadModule digest_auth_module     modules/ApacheModuleAuthDigest.dll
LoadModule anon_auth_module      modules/ApacheModuleAuthAnon.dll
LoadModule cern_meta_module      modules/ApacheModuleCERNMeta.dll
LoadModule digest_module      modules/ApacheModuleDigest.dll
LoadModule expires_module      modules/ApacheModuleExpires.dll
LoadModule headers_module      modules/ApacheModuleHeaders.dll
LoadModule proxy_module      modules/ApacheModuleProxy.dll
LoadModule speling_module      modules/ApacheModuleSpeling.dll
LoadModule status_module      modules/ApacheModuleStatus.dll
LoadModule info_module          modules/ApacheModuleInfo.dll
LoadModule usertrack_module      modules/ApacheModuleUserTrack.dll
LoadModule vhost_alias_module     modules/ApacheModuleVhostAlias.dll
LoadModule agent_log_module     modules/ApacheModuleLogAgent.dll
LoadModule referer_log_module     modules/ApacheModuleLogReferer.dll
LoadModule perl_module      modules/ApacheModulePerl.DLL
LoadModule fastcgi_module      modules/ApacheModuleFastCGI.dll
LoadModule onsint_module      modules/ApacheModuleOnsint.dll
LoadModule wchandshake_module     modules/ApacheModuleWchandshake.dll
ClearModuleList
AddModule mod_so.c
AddModule mod_onsint.c
AddModule mod_mime_magic.c
AddModule mod_mime.c
AddModule mod_access.c
AddModule mod_auth.c
AddModule mod_negotiation.c
AddModule mod_include.c
AddModule mod_autoindex.c
AddModule mod_dir.c
AddModule mod_cgi.c
AddModule mod_userdir.c
AddModule mod_alias.c
AddModule mod_env.c
AddModule mod_log_config.c
AddModule mod_asis.c
AddModule mod_imap.c
AddModule mod_actions.c
AddModule mod_setenvif.c
AddModule mod_isapi.c
AddModule mod_vhost_alias.c
AddModule mod_log_referer.c
AddModule mod_log_agent.c
AddModule mod_auth_anon.c
AddModule mod_auth_dbm.c
AddModule mod_auth_digest.c
AddModule mod_cern_meta.c
AddModule mod_digest.c
AddModule mod_expires.c
AddModule mod_headers.c
AddModule mod_proxy.c
AddModule mod_speling.c
AddModule mod_info.c
AddModule mod_status.c
AddModule mod_usertrack.c
AddModule mod_perl.c
AddModule mod_fastcgi.c
AddModule mod_wchandshake.c
<IfDefine SSL>
LoadModule ossl_module      modules/ApacheModuleOSSL.DLL
</IfDefine>
# ExtendedStatus controls whether Apache will generate "full" status
# information (ExtendedStatus On) or just basic information (ExtendedStatus
# Off) when the "server-status" handler is called. The default is Off.
ExtendedStatus On
### Section 2: 'Main' server configuration
# The directives in this section set up the values used by the 'main'
# server, which responds to any requests that aren't handled by a
# <VirtualHost> definition. These values also provide defaults for
# any <VirtualHost> containers you may define later in the file.
# All of these directives may appear inside <VirtualHost> containers,
# in which case these default settings will be overridden for the
# virtual host being defined.
# Port: The port to which the standalone server listens. Certain firewall
# products must be configured before Apache can listen to a specific port.
# Other running httpd servers will also interfere with this port. Disable
# all firewall, security, and other services if you encounter problems.
# To help diagnose problems use the Windows NT command NETSTAT -a
Port 7777
Listen 7777
# ServerAdmin: Your address, where problems with the server should be
# e-mailed. This address appears on some server-generated pages, such
# as error documents.
ServerAdmin [email protected]
# ServerName allows you to set a host name which is sent back to clients for
# your server if it's different than the one the program would get (i.e., use
# "www" instead of the host's real name).
# Note: You cannot just invent host names and hope they work. The name you
# define here must be a valid DNS name for your host. If you don't understand
# this, ask your network administrator.
# If your host doesn't have a registered DNS name, enter its IP address here.
# You will have to access it by its address (e.g., http://123.45.67.89/)
# anyway, and this will make redirections work in a sensible way.
# 127.0.0.1 is the TCP/IP local loop-back address, often named localhost. Your
# machine always knows itself by this address. If you use Apache strictly for
# local testing and development, you may use 127.0.0.1 as the server name.
ServerName localhost
# DocumentRoot: The directory out of which you will serve your
# documents. By default, all requests are taken from this directory, but
# symbolic links and aliases may be used to point to other locations.
DocumentRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs"
# Each directory to which Apache has access, can be configured with respect
# to which services and features are allowed and/or disabled in that
# directory (and its subdirectories).
# First, we configure the "default" to be a very restrictive set of
# permissions.
<Directory />
Options FollowSymLinks
AllowOverride None
</Directory>
# Note that from this point forward you must specifically allow
# particular features to be enabled - so if something's not working as
# you might expect, make sure that you have specifically enabled it
# below.
# This should be changed to whatever you set DocumentRoot to.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\htdocs">
# This may also be "None", "All", or any combination of "Indexes",
# "Includes", "FollowSymLinks", "ExecCGI", or "MultiViews".
# Note that "MultiViews" must be named explicitly --- "Options All"
# doesn't give it to you.
Options Indexes FollowSymLinks MultiViews
# This controls which options the .htaccess files in directories can
# override. Can also be "All", or any combination of "Options", "FileInfo",
# "AuthConfig", and "Limit"
AllowOverride None
# Controls who can get stuff from this server.
Order allow,deny
Allow from all
</Directory>
# UserDir: The name of the directory which is appended onto a user's home
# directory if a ~user request is received.
# Under Win32, we do not currently try to determine the home directory of
# a Windows login, so a format such as that below needs to be used. See
# the UserDir documentation for details.
<IfModule mod_userdir.c>
     UserDir "E:\oracle\product\10.1.0\Companion\Apache\Apache\users\"
</IfModule>
# Control access to UserDir directories. The following is an example
# for a site where these directories are restricted to read-only.
#<Directory /home/*/public_html>
# AllowOverride FileInfo AuthConfig Limit
# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec
# <Limit GET POST OPTIONS PROPFIND>
# Order allow,deny
# Allow from all
# </Limit>
# <LimitExcept GET POST OPTIONS PROPFIND>
# Order deny,allow
# Deny from all
# </LimitExcept>
#</Directory>
# DirectoryIndex: Name of the file or files to use as a pre-written HTML
# directory index. Separate multiple entries with spaces.
<IfModule mod_dir.c>
DirectoryIndex index.html
</IfModule>
# AccessFileName: The name of the file to look for in each directory
# for access control information.
AccessFileName .htaccess
# The following lines prevent .htaccess files from being viewed by
# Web clients. Since .htaccess files often contain authorization
# information, access is disallowed for security reasons. Comment
# these lines out if you want Web visitors to see the contents of
# .htaccess files. If you change the AccessFileName directive above,
# be sure to make the corresponding changes here.
# Also, folks tend to use names such as .htpasswd for password
# files, so this will protect those as well.
<Files ~ "^\.ht">
Order allow,deny
Deny from all
</Files>
# CacheNegotiatedDocs: By default, Apache sends "Pragma: no-cache" with each
# document that was negotiated on the basis of content. This asks proxy
# servers not to cache the document. Uncommenting the following line disables
# this behavior, and proxies will be allowed to cache the documents.
#CacheNegotiatedDocs
# UseCanonicalName: (new for 1.3) With this setting turned on, whenever
# Apache needs to construct a self-referencing URL (a URL that refers back
# to the server the response is coming from) it will use ServerName and
# Port to form a "canonical" name. With this setting off, Apache will
# use the hostname:port that the client supplied, when possible. This
# also affects SERVER_NAME and SERVER_PORT in CGI scripts.
UseCanonicalName On
# TypesConfig describes where the mime.types file (or equivalent) is
# to be found.
<IfModule mod_mime.c>
TypesConfig conf/mime.types
</IfModule>
# DefaultType is the default MIME type the server will use for a document
# if it cannot otherwise determine one, such as from filename extensions.
# If your server contains mostly text or HTML documents, "text/plain" is
# a good value. If most of your content is binary, such as applications
# or images, you may want to use "application/octet-stream" instead to
# keep browsers from trying to display binary files as though they are
# text.
DefaultType text/plain
# The mod_mime_magic module allows the server to use various hints from the
# contents of the file itself to determine its type. The MIMEMagicFile
# directive tells the module where the hint definitions are located.
# mod_mime_magic is not part of the default server (you have to add
# it yourself with a LoadModule [see the DSO paragraph in the 'Global
# Environment' section], or recompile the server and include mod_mime_magic
# as part of the configuration), so it's enclosed in an <IfModule> container.
# This means that the MIMEMagicFile directive will only be processed if the
# module is part of the server.
<IfModule mod_mime_magic.c>
MIMEMagicFile conf/magic
</IfModule>
# HostnameLookups: Log the names of clients or just their IP addresses
# e.g., www.apache.org (on) or 204.62.129.132 (off).
# The default is off because it'd be overall better for the net if people
# had to knowingly turn this feature on, since enabling it means that
# each client request will result in AT LEAST one lookup request to the
# nameserver.
HostnameLookups Off
# ErrorLog: The location of the error log file.
# If you do not specify an ErrorLog directive within a <VirtualHost>
# container, error messages relating to that virtual host will be
# logged here. If you do define an error logfile for a <VirtualHost>
# container, that host's errors will be logged there and not here.
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"
# LogLevel: Control the number of messages logged to the error.log.
# Possible values include: debug, info, notice, warn, error, crit,
# alert, emerg.
LogLevel warn
# The following directives define some format nicknames for use with
# a CustomLog directive (see below).
# Alternate "common" format to use when fronted by webcache:
# LogFormat "%{ClientIP}i %l %u %t \"%r\" %>s %b %h" common_webcache
# When webcache is forwarding requests to OHS, %h becomes the IP of
# the originating webcache server and the real client IP is stored
# in the ClientIP header. The common_webcache format can be used
# in place of the common format when using webcache but with one
# important caveat: if clients are capable of bypassing webcache
# then it is possible to spoof the client IP by manually setting
# the ClientIP header so the %h field should be monitored in such
# an environment. Another alternative to specifying the ClientIP
# header directly in a LogFormat is to use the "UseWebCacheIp"
# directive:
# UseWebCacheIp On
# When this is specified, %h is derived internally from the ClientIP
# header and the access log format does not need to be modified.
LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined
LogFormat "%h %l %u %t \"%r\" %>s %b" common
LogFormat "%{Referer}i -> %U" referer
LogFormat "%{User-agent}i" agent
# The location and format of the access logfile (Common Logfile Format).
# If you do not define any access logfiles within a <VirtualHost>
# container, they will be logged here. Contrariwise, if you do
# define per-<VirtualHost> access logfiles, transactions will be
# logged therein and not in this file.
CustomLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/access_log 43200" common
# If you would like to have agent and referer logfiles, uncomment the
# following directives.
#CustomLog logs/referer.log referer
#CustomLog logs/agent.log agent
# If you prefer a single logfile with access, agent, and referer information
# (Combined Logfile Format) you can use the following directive.
#CustomLog logs/access.log combined
# Optionally add a line containing the server version and virtual host
# name to server-generated pages (error documents, FTP directory listings,
# mod_status and mod_info output etc., but not CGI generated documents).
# Set to "EMail" to also include a mailto: link to the ServerAdmin.
# Set to one of: On | Off | EMail
ServerSignature On
# Apache parses all CGI scripts for the shebang line by default.
# This comment line, the first line of the script, consists of the symbols
# pound (#) and exclamation (!) followed by the path of the program that
# can execute this specific script. For a perl script, with perl.exe in
# the C:\Program Files\Perl directory, the shebang line should be:
#!c:/program files/perl/perl
# Note you mustnot_ indent the actual shebang line, and it must be the
# first line of the file. Of course, CGI processing must be enabled by
# the appropriate ScriptAlias or Options ExecCGI directives for the files
# or directory in question.
# However, Apache on Windows allows either the Unix behavior above, or can
# use the Registry to match files by extention. The command to execute
# a file of this type is retrieved from the registry by the same method as
# the Windows Explorer would use to handle double-clicking on a file.
# These script actions can be configured from the Windows Explorer View menu,
# 'Folder Options', and reviewing the 'File Types' tab. Clicking the Edit
# button allows you to modify the Actions, of which Apache 1.3 attempts to
# perform the 'Open' Action, and failing that it will try the shebang line.
# This behavior is subject to change in Apache release 2.0.
# Each mechanism has it's own specific security weaknesses, from the means
# to run a program you didn't intend the website owner to invoke, and the
# best method is a matter of great debate.
# To enable the this Windows specific behavior (and therefore -disable- the
# equivilant Unix behavior), uncomment the following directive:
#ScriptInterpreterSource registry
# The directive above can be placed in individual <Directory> blocks or the
# .htaccess file, with either the 'registry' (Windows behavior) or 'script'
# (Unix behavior) option, and will override this server default option.
# Aliases: Add here as many aliases as you need (with no limit). The format is
# Alias fakename realname
<IfModule mod_alias.c>
# Note that if you include a trailing / on fakename then the server will
# require it to be present in the URL. So "/icons" isn't aliased in this
# example, only "/icons/"..
Alias /jservdocs/ "E:\oracle\product\10.1.0\Companion\Apache\Jserv\docs/"
Alias /javacachedocs/ "E:\oracle\product\10.1.0\Companion\javacache\javadoc/"
Alias /icons/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\icons/"
Alias /i/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\images/"
<Directory "icons">
Options Indexes MultiViews
AllowOverride None
Order allow,deny
Allow from all
</Directory>
<IfModule mod_perl.c>
     Alias /perl/ "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin/"
</IfModule>
# ScriptAlias: This controls which directories contain server scripts.
# ScriptAliases are essentially the same as Aliases, except that
# documents in the realname directory are treated as applications and
# run by the server when requested rather than as documents sent to the client.
# The same rules about trailing "/" apply to ScriptAlias directives as to
# Alias.
ScriptAlias /cgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin/"
# "E:\oracle\product\10.1.0\Companion\Apache\Apache/cgi-bin" should be changed to whatever your ScriptAliased
# CGI directory exists, if you have that configured.
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\cgi-bin">
AllowOverride None
Options None
Order allow,deny
Allow from all
</Directory>
</IfModule>
# End of aliases.
# Redirect allows you to tell clients about documents which used to exist in
# your server's namespace, but do not anymore. This allows you to tell the
# clients where to look for the relocated document.
# Format: Redirect old-URI new-URL
# Directives controlling the display of server-generated directory listings.
<IfModule mod_autoindex.c>
# FancyIndexing is whether you want fancy directory indexing or standard
# Note, add the option TrackModified to the IndexOptions default list only
# if all indexed directories reside on NTFS volumes. The TrackModified flag
# will report the Last-Modified date to assist caches and proxies to properly
# track directory changes, but it does not work on FAT volumes.
IndexOptions FancyIndexing
# AddIcon* directives tell the server which icon to show for different
# files or filename extensions. These are only displayed for
# FancyIndexed directories.
AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip
AddIconByType (TXT,/icons/text.gif) text/*
AddIconByType (IMG,/icons/image2.gif) image/*
AddIconByType (SND,/icons/sound2.gif) audio/*
AddIconByType (VID,/icons/movie.gif) video/*
AddIcon /icons/binary.gif .bin .exe
AddIcon /icons/binhex.gif .hqx
AddIcon /icons/tar.gif .tar
AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv
AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip
AddIcon /icons/a.gif .ps .ai .eps
AddIcon /icons/layout.gif .html .shtml .htm .pdf
AddIcon /icons/text.gif .txt
AddIcon /icons/c.gif .c
AddIcon /icons/p.gif .pl .py
AddIcon /icons/f.gif .for
AddIcon /icons/dvi.gif .dvi
AddIcon /icons/uuencoded.gif .uu
AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl
AddIcon /icons/tex.gif .tex
AddIcon /icons/bomb.gif core
AddIcon /icons/back.gif ..
AddIcon /icons/hand.right.gif README
AddIcon /icons/folder.gif ^^DIRECTORY^^
AddIcon /icons/blank.gif ^^BLANKICON^^
# DefaultIcon is which icon to show for files which do not have an icon
# explicitly set.
DefaultIcon /icons/unknown.gif
# AddDescription allows you to place a short description after a file in
# server-generated indexes. These are only displayed for FancyIndexed
# directories.
# Format: AddDescription "description" filename
#AddDescription "GZIP compressed document" .gz
#AddDescription "tar archive" .tar
#AddDescription "GZIP compressed tar archive" .tgz
# ReadmeName is the name of the README file the server will look for by
# default, and append to directory listings.
# HeaderName is the name of a file which should be prepended to
# directory indexes.
# If MultiViews are amongst the Options in effect, the server will
# first look for name.html and include it if found. If name.html
# doesn't exist, the server will then look for name.txt and include
# it as plaintext if found.
ReadmeName README
HeaderName HEADER
# IndexIgnore is a set of filenames which directory indexing should ignore
# and not include in the listing. Shell-style wildcarding is permitted.
IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t
</IfModule>
# End of indexing directives.
# Document types.
<IfModule mod_mime.c>
# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress
# information on the fly. Note: Not all browsers support this.
# Despite the name similarity, the following Add* directives have nothing
# to do with the FancyIndexing customization directives above.
AddEncoding x-compress Z
AddEncoding x-gzip gz tgz
# AddLanguage allows you to specify the language of a document. You can
# then use content negotiation to give a browser a file in a language
# it can understand.
# Note 1: The suffix does not have to be the same as the language
# keyword --- those with documents in Polish (whose net-standard
# language code is pl) may wish to use "AddLanguage pl .po" to
# avoid the ambiguity with the common suffix for perl scripts.
# Note 2: The example entries below illustrate that in quite
# some cases the two character 'Language' abbriviation is not
# identical to the two character 'Country' code for its country,
# E.g. 'Danmark/dk' versus 'Danish/da'.
# Note 3: In the case of 'ltz' we violate the RFC by using a three char
# specifier. But there is 'work in progress' to fix this and get
# the reference data for rfc1766 cleaned up.
# Danish (da) - Dutch (nl) - English (en) - Estonian (ee)
# French (fr) - German (de) - Greek-Modern (el)
# Italian (it) - Korean (kr) - Norwegian (no)
# Portugese (pt) - Luxembourgeois* (ltz)
# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz)
# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja)
# Russian (ru)
AddLanguage ar .ar
AddLanguage da .dk .da
AddLanguage nl .nl
AddLanguage en .en
AddLanguage et .ee
AddLanguage fi .fi
AddLanguage fr .fr
AddLanguage de .de
AddLanguage el .el
AddLanguage es .es_ES .es
AddLanguage he .he .iw
AddLanguage hu .hu
AddCharset ISO-8859-8 .iso8859-8
AddLanguage it .it
AddLanguage ja .ja
AddCharset ISO-2022-JP .jis
AddLanguage ko .ko
AddLanguage kr .kr
AddCharset ISO-2022-KR .iso-kr
AddLanguage nn .nn
AddLanguage no .no
AddLanguage pl .po
AddCharset ISO-8859-2 .iso-pl
AddLanguage pt .pt
AddLanguage pt-br .pt_BR .pt-br
AddLanguage ltz .lu
AddLanguage ca .ca
AddLanguage sk .sk
AddLanguage sv .sv
AddLanguage th .th
AddLanguage tr .tr
AddLanguage cz .cz .cs
AddLanguage ro .ro
AddLanguage ru .ru
AddLanguage zh-cn .zh_CN
AddLanguage zh-tw .zh_TW
AddCharset Big5 .Big5 .big5
AddCharset WINDOWS-1251 .cp-1251
AddCharset CP866 .cp866
AddCharset ISO-8859-5 .iso-ru
AddCharset KOI8-R .koi8-r
AddCharset UCS-2 .ucs2
AddCharset UCS-4 .ucs4
AddCharset UTF-8 .utf8
# LanguagePriority allows you to give precedence to some languages
# in case of a tie during content negotiation.
# Just list the languages in decreasing order of preference. We have
# more or less alphabetized them here. You probably want to change this.
<IfModule mod_negotiation.c>
LanguagePriority ar en da nl et fi fr de el it ja ko kr no pl pt pt-br ro ru ltz ca es sk sv th tr zh-cn zh-tw zh-cn
</IfModule>
# AddType allows you to tweak mime.types without actually editing it, or to
# make certain files to be certain types.
# For example, the PHP 3.x module (not part of the Apache distribution - see
# http://www.php.net) will typically use:
#AddType application/x-httpd-php3 .php3
#AddType application/x-httpd-php3-source .phps
# And for PHP 4.x, use:
#AddType application/x-httpd-php .php
#AddType application/x-httpd-php-source .phps
AddType application/x-tar .tgz
# AddHandler allows you to map certain file extensions to "handlers",
# actions unrelated to filetype. These can be either built into the server
# or added with the Action command (see below)
# If you want to use server side includes, or CGI outside
# ScriptAliased directories, uncomment the following lines.
# To use CGI scripts:
#AddHandler cgi-script .cgi
# To use server-parsed HTML files
#AddType text/html .shtml
#AddHandler server-parsed .shtml
AddType text/xml xbl
AddType text/x-component htc
# Uncomment the following line to enable Apache's send-asis HTTP file
# feature
#AddHandler send-as-is asis
# If you wish to use server-parsed imagemap files, use
#AddHandler imap-file map
# To enable type maps, you might want to use
#AddHandler type-map var
</IfModule>
# End of document types.
# Action lets you define media types that will execute a script whenever
# a matching file is called. This eliminates the need for repeated URL
# pathnames for oft-used CGI file processors.
# Format: Action media/type /cgi-script/location
# Format: Action handler-name /cgi-script/location
# MetaDir: specifies the name of the directory in which Apache can find
# meta information files. These files contain additional HTTP headers
# to include when sending the document
#MetaDir .web
# MetaSuffix: specifies the file name suffix for the file containing the
# meta information.
#MetaSuffix .meta
# Customizable error response (Apache style)
# these come in three flavors
# 1) plain text
#ErrorDocument 500 "The server made a boo boo.
# n.b. the single leading (") marks it as text, it does not get output
# 2) local redirects
#ErrorDocument 404 /missing.html
# to redirect to local URL /missing.html
#ErrorDocument 404 /cgi-bin/missing_handler.pl
# N.B.: You can redirect to a script or a document using server-side-includes.
# 3) external redirects
#ErrorDocument 402 http://some.other_server.com/subscription_info.html
# N.B.: Many of the environment variables associated with the original
# request will not be available to such a script.
# Customize behaviour based on the browser
<IfModule mod_setenvif.c>
# The following directives modify normal HTTP response behavior.
# The first directive disables keepalive for Netscape 2.x and browsers that
# spoof it. There are known problems with these browser implementations.
# The second directive is for Microsoft Internet Explorer 4.0b2
# which has a broken HTTP/1.1 implementation and does not properly
# support keepalive when it is used on 301 or 302 (redirect) responses.
BrowserMatch "Mozilla/2" nokeepalive
BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0
# The following directive disables HTTP/1.1 responses to browsers which
# are in violation of the HTTP/1.0 spec by not being able to grok a
# basic 1.1 response.
BrowserMatch "RealPlayer 4\.0" force-response-1.0
BrowserMatch "Java/1\.0" force-response-1.0
BrowserMatch "JDK/1\.0" force-response-1.0
</IfModule>
# End of browser customization directives
# Allow server status reports, with the URL of http://servername/server-status
# Change the ".your_domain.com" to match your domain to enable.
<Location /server-status>
SetHandler server-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
# Allow remote server configuration reports, with the URL of
# http://servername/server-info (requires that mod_info.c be loaded).
# Change the ".your_domain.com" to match your domain to enable.
#<Location /server-info>
# SetHandler server-info
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
#</Location>
# There have been reports of people trying to abuse an old bug from pre-1.1
# days. This bug involved a CGI script distributed as a part of Apache.
# By uncommenting these lines you can redirect these attacks to a logging
# script on phf.apache.org. Or, you can record them yourself, using the script
# support/phf_abuse_log.cgi.
#<Location /cgi-bin/phf*>
# Deny from all
# ErrorDocument 403 http://phf.apache.org/phf_abuse_log.cgi
#</Location>
# Proxy Server directives. Uncomment the following lines to
# enable the proxy server:
#<IfModule mod_proxy.c>
# ProxyRequests On
# <Directory proxy:*>
# Order deny,allow
# Deny from all
# Allow from .your_domain.com
# </Directory>
# Enable/disable the handling of HTTP/1.1 "Via:" headers.
# ("Full" adds the server version; "Block" removes all outgoing Via: headers)
# Set to one of: Off | On | Full | Block
# ProxyVia On
# To enable the cache as well, edit and uncomment the following lines:
# (no cacheing without CacheRoot)
# CacheRoot "E:\oracle\product\10.1.0\Companion\Apache\Apache\proxy"
# CacheSize 5
# CacheGcInterval 4
# CacheMaxExpire 24
# CacheLastModifiedFactor 0.1
# CacheDefaultExpire 1
# NoCache a_domain.com another_domain.edu joes.garage_sale.com
#</IfModule>
# End of proxy directives.
### Section 3: Virtual Hosts
# VirtualHost: If you want to maintain multiple domains/hostnames on your
# machine you can setup VirtualHost containers for them. Most configurations
# use only name-based virtual hosts so the server doesn't need to worry about
# IP addresses. This is indicated by the asterisks in the directives below.
# Please see the documentation at <URL:http://www.apache.org/docs/vhosts/>
# for further details before you try to setup virtual hosts.
# You may use the command line option '-S' to verify your virtual host
# configuration.
# Use name-based virtual hosting.
#NameVirtualHost *
#NameVirtualHost 12.34.56.78:80
#NameVirtualHost 12.34.56.78
# VirtualHost example:
# Almost any Apache directive may go into a VirtualHost container.
# The first VirtualHost section is used for requests without a known
# server name.
#<VirtualHost *>
# ServerAdmin [email protected]
# DocumentRoot /www/docs/dummy-host.example.com
# ServerName dummy-host.example.com
# ErrorLog logs/dummy-host.example.com-error_log
# CustomLog logs/dummy-host.example.com-access_log common
#</VirtualHost>
#<VirtualHost default:*>
#</VirtualHost>
SetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
<IfModule mod_perl.c>
# Perl Directives
# PerlWarn On
# PerlFreshRestart On
# PerlSetEnv PERL5OPT Tw
# PerlSetEnv PERL5LIB "E:\oracle\product\10.1.0\Companion\perl\5.6.1\lib:E:\oracle\product\10.1.0\Companion\perl\site\5.6.1\lib"
PerlModule Apache
# PerlModule Apache::Status
PerlModule Apache::Registry
# PerlModule Apache::CGI
# PerlModule Apache::DBI
# PerlRequire
<Location /perl>
SetHandler perl-script
PerlHandler Apache::Registry
AddHandler perl-script .pl
Options +ExecCGI
PerlSendHeader On
</Location>
# <Location /perl-status>
# SetHandler perl-script
# PerlHandler Apache::Status
# order deny,allow
# deny from all
# allow from localhost
# </Location>
</IfModule>
#Protect WEB-INF directory
<DirectoryMatch /WEB-INF/>
Order deny,allow
Deny from all
</DirectoryMatch>
# Setup of FastCGI module
<IfModule mod_fastcgi.c>
Alias /fastcgi/ "E:\oracle\product\10.1.0\Companion\Apache\fastcgi/"
ScriptAlias /fcgi-bin/ "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin/"
<Directory "E:\oracle\product\10.1.0\Companion\Apache\Apache\fcgi-bin">
     AllowOverride None
     Options None
     Order allow,deny
     Allow from all
     SetHandler fastcgi-script
     <IfModule mod_ossl.c>
     SSLOptions +StdEnvVars
     </IfModule>
</Directory>
</IfModule>
# Include the configuration for Apache JServ 1.1
#include "E:\oracle\product\10.1.0\Companion\Apache\Jserv\conf\jserv.conf"
# Setup of oprocmgr module.
# This directive identifies each remote apache instance that will be
# sending requests to processes (e.g., JServs), managed by local Apache
# instances. This directive is used by the local process manager to share
# routing information with remote apache instances via non-SSL HTTP messages.
# The directive is repeated for each remote apache instance that will be
# sending requests. The ProcNode directive that refers to the local apache
# instance will be ignored, but may be supplied to facilitate uniformity
# in configuration across apache instances. Arguments to the ProcNode must
# be sufficient to reach the remote instance of apache via non-SSL HTTP
# messages. It is not considered an error if the remote apache instance is
# unreachable, as no assumption is made about the starting order or
# availability of apache instances.
# Syntax: ProcNode <hostname> <port>
# Example: ProcNode abc.com 7777
<IfModule mod_oprocmgr.c>
<Location /oprocmgr-service>
SetHandler oprocmgr-service
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
<Location /oprocmgr-status>
SetHandler oprocmgr-status
Order deny,allow
Deny from all
Allow from localhost localhost localhost
</Location>
</IfModule>
# Include the mod_oc4j configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_oc4j.conf"
# Include the mod_dms configuration file
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\dms.conf"
# Loading rewrite_module here so it loads before mod_oc4j
LoadModule rewrite_module      modules/ApacheModuleRewrite.dll
# Include the SSL definitions and Virtual Host container
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\ssl.conf"
# Include the mod_osso configuration file
#include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\mod_osso.conf"
# Include the Oracle configuration file for custom settings
include "E:\oracle\product\10.1.0\Companion\Apache\Apache\conf\oracle_apache.conf"
------------------------------------------------------------------------------------------------------------------

Firstly, there's no such thing as Apache 9.3, there's Apache 1 (and subversions) and Apache 2 (and subversions). Your error message -
Oracle-HTTP-Server/1.3.28Shows you're using Apache 1.3.28
Secondly, I'm confused by your comment -
I do not have Apache 9.3 or higher but I think oracle should offer this in its companion CDOracle does offer the Apache server, if you're saying you didn't get it from Oracle then where did your Apache server come from?
Thirdly, I notice from your config file -
ErrorLog "|E:\oracle\product\10.1.0\Companion\Apache\Apache\bin\rotatelogs logs/error_log 43200"That you're piping the logs through rotatelogs, are you sure the logfiles haven't just been renamed?

Problem with Configuring Tomcat for running jsp web applications..Plz HELP

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

I am using Tomcat 5.5 and Jdk 1.5.0_12 and Oracle 10g. I am using jdbc-odbc bridge connection
to connect to the database. I have placed my project folder called
tdm under the webapps folder in Tomcat. This 'tdm' folder consists of
a collection of html pages,jsp pages and images of my project. Also I created a
WEB-INF folderand in that I have lib folder which contains catalina-root.jar
, classes12.jar and nls_charset.jar files. And also in the WEB-INF folder I have the web.xml
file which looks like this
<?xml version="1.0" encoding="ISO-8859-1"?>

<web-app>
<resource-ref>
<description>Oracle Datasource example</description>
<res-ref-name>jdbc/gdn</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
</web-app>
My Server.xml file in Tomcat\conf folder is as follows



<Server port="8005" shutdown="SHUTDOWN">

<Listener className="org.apache.catalina.mbeans.ServerLifecycleListener" />
<Listener className="org.apache.catalina.mbeans.GlobalResourcesLifecycleListener" />

<GlobalNamingResources>

<Environment name="simpleValue" type="java.lang.Integer" value="30"/>

<Resource name="UserDatabase" auth="Container"
type="org.apache.catalina.UserDatabase"
description="User database that can be updated and saved"
factory="org.apache.catalina.users.MemoryUserDatabaseFactory"
pathname="conf/tomcat-users.xml" />
<Resource name="jdbc/gdn" auth="Container"
type="javax.sql.DataSource" driverClassName="sun.jdbc.odbc.JdbcOdbcDriver"
url="jdbc:odbc:gdn"
username="system" password="tiger" maxActive="20" maxIdle="10"
maxWait="-1"/>
</GlobalNamingResources>


<Service name="Catalina">


<Connector
port="5050" maxThreads="150" minSpareThreads="25" maxSpareThreads="75"
enableLookups="false" redirectPort="8443" acceptCount="100"
connectionTimeout="20000" disableUploadTimeout="true" />

     



<Connector port="8009"
enableLookups="false" redirectPort="8443" protocol="AJP/1.3" />






<Engine name="Catalina" defaultHost="localhost">




<Realm className="org.apache.catalina.realm.UserDatabaseRealm"
resourceName="UserDatabase"/>







<Host name="localhost" appBase="webapps"
unpackWARs="true" autoDeploy="true"
xmlValidation="false" xmlNamespaceAware="false">









<Context path="/tdm" docBase="tdm" debug="0" reloadable="true" />
</Host>
</Engine>
</Service>
</Server>
I have set the context path to /tdm in the server.xml file. Should this be placed in context.xml?
My first page in the project is called Homepage.html. To start my project I give http://localhost:5050/tdm/homepage.html
in a browser. Here I accept a username and password from the user and then do the validation in
a valid.jsp file, where I connect to the database and check and use jsp:forward to go to next pages
accordingly. However when I enter the username and password and click Go in the homepage, nothing is
displayed on the next page. The URL in the browser says valid.jsp but a blank screen appears.
WHY DOES IT HAPPEN SO? DOES IT MEAN THAT TOMCAT IS NOT RECOGNIZING JAVA IN MY SYSTEM OR IS IT A PROBLEM
WITH THE DATABASE CONNECTION OR SOMETHING ELSE? I FEEL THAT TOMCAT IS NOT EXECUTING JSP COMMANDS?
IS IT POSSIBLE?WHY WILL THIS HAPPEN?
I set the JAVA_HOME and CATALINA_HOME environment to the jdk and tomcat folders resp.
Is there any other thing that I need to set in classpath? Should I have my project as a
WAR file in the webapps of TOMCAT or just a folder i.e. directory structure will fine?

Having a problem with creating/using a primary key on a view

I have a problem with a primary key on a view
I created the view and primary key as follows:
CREATE OR REPLACE FORCE VIEW "MDD"."ROCK_LU" ("DESCRIPTION",
UNIQUE ("DESCRIPTION") RELY DISABLE,
CONSTRAINT "ROCK_LU_PK" PRIMARY KEY ("DESCRIPTION") RELY DISABLE) AS
SELECT DESCRIPTION
FROM MRMC_LU
WHERE ROCK = 'T';
The view with the primary key appears to have been created as there were no error messages. (The above was from the sql tab in sql developer.)
When I try to create the foreign key on my mdd_hr table - I get an error
/* hr_name - foreign key */
ALTER TABLE mdd_hr add CONSTRAINT hr_name_fk FOREIGN KEY (hr_name) REFERENCES rock_lu(description);
Error report:
SQL Error: ORA-02270: no matching unique or primary key for this column-list.
When I lookup the index in sql developer, rock_lu_pk is not there.
All my other foreign keys work - but I don't understand what I am doing wrong with this one. Please help.
glenn
Background - as to why I want to use a view as a lookup table.
The MRMC_LU table that the view is created from is structured like:
DESCRIPTION - MINERAL - ROCK - MODIFIER - COMMODITY
ANHYDRITE - T - T - T
APLITE - T - - T
GRAPHITE - T - - - T
GREYWACKE - - T
DESCRIPTION is a list of all names of minerals, rocks, modifiers and commodities. T is entered in each valid field. Often a description name is used for both a mineral and a rock or a mineral and a commodity or any other combination. Because this database is just starting up, it was more efficient to create one table that could be updated (and thereby automatically update the MINERAL_LU, ROCK_LU, MODIFIER_LY, COMMODITY_LU views) rather than create and maintain four separate but similar tables. A primary key cannot be generated for the MRMC_LU table as there are nulls in each column
except DESCRIPTION.
Perhaps there is a smarter way to do this?

http://download-uk.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_85a.htm#2065512
You can specify constraints on views and object views. You define the constraint at the view level using the out_of_line_constraint clause. You define the constraint as part of column or attribute specification using the inline_constraint clause after the appropriate alias.
Oracle does not enforce view constraints. However, operations on views are subject to the integrity constraints defined on the underlying base tables. This means that you can enforce constraints on views through constraints on base tables.
Restrictions on View Constraints
View constraints are a subset of table constraints and are subject to the following restrictions:
You can specify only unique, primary key, and foreign key constraints on views. However, you can define the view using the WITH CHECK OPTION clause, which is equivalent to specifying a check constraint for the view.
Because view constraints are not enforced directly, you cannot specify INITIALLY DEFERRED or DEFERRABLE.
View constraints are supported only in DISABLE NOVALIDATE mode. You must specify the keywords DISABLE NOVALIDATE when you declare the view constraint, and you cannot specify any other mode.
You cannot specify the using_index_clause, the exceptions_clause clause, or the ON DELETE clause of the references_clause.
You cannot define view constraints on attributes of an object column.
Rgds.

Problem with trigger and mutating table

Hello,
I have a problem with the following trigger. Everytime it starts I got an error message:
ORA-04091: table ccq_test.QW_QUALIFIER is mutating, trigger/function may not see it
ORA-06512: at "QW_AFTER_UPDATE_ALL", line 3
ORA-06512: at "QW_AFTER_UPDATE_ALL", line 10
ORA-04088: error during execution of trigger 'QW_AFTER_UPDATE_ALL'
Here is the trigger:
CREATE OR REPLACE TRIGGER qw_after_update_all
AFTER UPDATE ON ccq_test.QW_QUALIFIER FOR EACH ROW
DECLARE
     CURSOR c1 IS SELECT id AS mx FROM QW_QUALIFIER_LOG WHERE msgid = :NEW.msgid AND messagedate BETWEEN SYSDATE - (1 / (24 * 60 * 6)) AND SYSDATE AND transfer = 1;
     CURSOR c_qwprod IS SELECT value FROM ccq_test.QW_QUALIFIER WHERE msgid = :NEW.msgid AND name = 'product';
     CURSOR c_qwgesch IS SELECT value FROM ccq_test.QW_QUALIFIER WHERE msgid = :NEW.msgid AND name = 'geschaeftsfall';
     qw_rec c1%ROWTYPE;
     qw_prod c_qwprod%ROWTYPE;
     qw_gesch c_qwgesch%ROWTYPE;
BEGIN
OPEN c1;
OPEN c_qwprod;
OPEN c_qwgesch;
     FETCH c1 INTO qw_rec;
     FETCH c_qwprod INTO qw_prod;
     FETCH c_qwgesch INTO qw_gesch;
     IF c1%NOTFOUND THEN
          IF (:NEW.name = 'product') THEN
               INSERT INTO QW_QUALIFIER_LOG VALUES (QW_QUALIFIER_LOG_SEQ.NEXTVAL, :NEW.msgid, :NEW.value, qw_gesch.value, SYSDATE, 1);
          ELSE
          INSERT INTO QW_QUALIFIER_LOG VALUES (QW_QUALIFIER_LOG_SEQ.NEXTVAL, :NEW.msgid, qw_prod.value, :NEW.value, SYSDATE, 1);
     END IF;
     ELSE
          IF (:NEW.name = 'product') THEN
               UPDATE QW_QUALIFIER_LOG SET product=:NEW.value, messagedate=SYSDATE WHERE id = qw_rec.mx;
          ELSE
               UPDATE QW_QUALIFIER_LOG SET geschaeftsfall=:NEW.value, messagedate=SYSDATE WHERE id = qw_rec.mx;
     END IF;
     END IF;
CLOSE c1;
END;
Can anyone help me?

You are trying to lookup data from qw_qualifier you are currently modifying. You could see the data in a inconsistent way and Oracle is protecting you from it.
You could read here about how to program around this problem.
But: your table design seems questionable. You have two records for qw_qualifier and you are trying to log it into one qw_qualifier_log record. Maybe you could fix that, and the need for querying the same table as you are updating is removed.
Regards,
Rob.

Problems with Lookups

Similar Messages

Maybe you are looking for