Problems with LR 3.6 ~ how do I go back?

I recently upgraded my LR to 3.6 and am having nothing but problems. The program freezes constantly and it is very hard to get work done. Trying to do anything while an image is loading causes the 3.6 to freeze. Only a 'Force Quit' will allow restarting.
I'm on a 2.16 Ghz Intel Core Duo with 2GB 667 MHz DDR2 SDRAM
I'd love to move to LR4 but my processor won't handle 64 bit.
I have never had problems with LR before and use it daily for work.
HOW DO I GO BACK TO THE VERSION BEFORE 3.6?
I can't get any work done here.
Thanks,
Dennis

Dennis,
http://www.adobe.com/support/downloads/product.jsp?product=113&platform=Macintosh
Just download the version you want and install it. You'll also need to drag your LR 3.6 to the trash and possibly replace the shortcut in the dock. Any 3.x version will read a 3.y catalogue.
Hal

Similar Messages

Problems with BBM 5.0; How can I go back to previous version

I have the BlackBerry Bold 9000 with AT&T. It is currently running v.4.6.0.304 (Platform 4.0.0.247). I made the mistake of upgrading to BBM 5.0. The problem I am having with 5.0 is that it keeps freezing in that while it initially works, after a couple of minutes, I can long send or receive messages, without rebooting my phone (and that sometimes does not work). So I deleted BBM 5.0. off my phone and would like to get the prior version. My phone is connected to an Enterprise Server and I asked my IT Staff to try and reinstall the prior version but they have not been having any luck. Does anybody have any suggestions? Your help would be greatly appreciated.

Google needs to update the Google Toolbar program for Firefox 5.0.
The Google Toolbar 7.1.20110512W version does work pretty good in Firefox 5.0 by using the Compatibility Reporter extension. But not every feature works 100%.
https://addons.mozilla.org/en-US/firefox/addon/add-on-compatibility-reporter/
http://googlesystem.blogspot.com/2011/06/enable-google-toolbar-in-firefox-5.html
solution courtesy the-edmeister

The upgrade to Firefox 4 is causing massive problems with my computer. How do I uninstall it and go back to using the previous version?

Firefox 4 is absolutely awful - it is causing massive problems with my computer. How do I uninstall Firefox 4 and go back to the previous version of Firefox?

According to the instructions given on the Norton Community forum under "Other Norton Products/Comcast-Customers - Norton Toolbar Problem in Firefox 10", I have done everything necessary. And I do have a Norton toolbar (Safe Web and Identity Safe) when I open Firefox 10. As was mentioned in the previous posts here, you need to run manual LiveUpdate then reboot until you have version 5.2.0.13. Then reboot and run manual LiveUpdate again and reboot once more. One thing that I noticed is that Norton never told me that it had updated the patch for Firefox 10, so I didn't know. I guess if you have the toolbar when you run Firefox 10, then you have done it all.

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?

Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario

I have a problem with adobe support advisor, how can i reinstall this program

i have a problem with adobe support advisor, how can i reinstall this program

hi wie kann ich adobe support advisor reinstalieren mac , ich bekomme fehlermeldung beim photoshop installation
Von meinem iPhone gesendet
Am 17.08.2014 um 07:17 schrieb Willi Adelberger <[email protected]>:
i have a problem with adobe support advisor, how can i reinstall this program
created by Willi Adelberger in Deutsche Foren - View the full discussion
Kannst Du mal anfangen Deine Frage zu stellen?
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at https://forums.adobe.com/message/6647388#6647388
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
To unsubscribe from this thread, please visit the message page at . In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Deutsche Foren by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

I'm having to many problems with Lion freezing up and want to go back to Snow Leopard,how can I do this?

I'm having to many problems with Lion freezing up and want to go back to Snow Leopard,how can I do this?

How to revert your Mac to Snow Leopard

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

I bought a new iphone 4s and I have a problem with the service. How can it be solved? the SIM card is new and was working perfect withe iPhone 4G

Under the answer you want to mark as correct you should see a box that says Correct with a green symbol to the left and a box with Helpful with an orange star to the left. Click on the one you want.
And thanks for thinking about that, it is appreciated.

I have an old generation Apple TV 160GB when trying to rent I get a message that I have to authorize my account information on my computer via iTunes...There is no problem with my account info how is this done?

I have an old generation Apple TV 160GB when trying to rent I get a message that I have to authorize my account information on my computer via iTunes...There is no problem with my account info how is this done?

stf10 wrote:
... trying to move my I tunes to my ny PC. ...
From where are you trying to move your iTunes...

I recently downloaded the latest iTunes update and now my menus are in Korean. I work in Korea but want my menus in English. I've never had this problem with updates before. How can I get English back? Thank you.

I recently downloaded the latest iTunes for Windows update, and now when I open iTunes my menus are in Korean. I live and work in Korea but want my menus in English like they always have been. I've never had this problem with updates before. How can I get English back? I'll appreciate any help.

CTRL+, (Comma) brings up preferences
General is the tab on the left
Language is the last drop down control
English (UK) & English (US) are 9th and 10th on the list
Close iTunes & reopen to effect the change
tt2

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to sen

I have Windows 7, Microsoft Outlook and PSE 13. I have used the "Share photos as embedded images" feature frequently, but today when I went to use it, it wasn't there, only the option to send email with files attached. How do I get back the ability to send emails with photos embedded. I like adding the frames and backgrounds and I think it's easier for recipients to look at the photos. Thanks for any suggestions of things to try.
Gail

I had a similar problem in that my wife's iphone 5 could not send pics with imessage. Had to set the settings to default to SMS or whatever. After laboring many hours on the web I coincidentally was on the phone with the internet people to question my internet speed. They changed the router channel, which is something that I am capable of doing myself. After that, the pics go over imessage. My own Iphone didn't have the problem. We are both latest IOS 7.0.6.

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

Hi, Nurlynn.
Thank you for visiting Apple Support Communities.
I would need clarification on this issue to provide a better answer. However, here are a couple articles that I would go through when experiencing issues with the Mic and Camera.
If your voice is too faint or sounds unclear using iPhone, or iPod touch
http://support.apple.com/kb/ts5183
Get help with the camera on your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT6350
Cheers,
Jason H.

Firefox 5 does not work with Google Toolbar. How do I go back to the previous Firefox version that I had?

Firefox 5 does not work with Google Toolbar. How do I go back to the previous Firefox version that I had? Or how can I get my Google Toolbar back?

Google Toolbar [https://support.mozilla.com/kb/Add-ons%20are%20disabled%20after%20updating%20Firefox Add-ons are disabled after updating Firefox]
* GBookmarks (Google Bookmarks for Firefox) 25.6KB<br>https://addons.mozilla.org/firefox/addon/gbookmarks-google-bookmarks-fo/
* http://kb.mozillazine.org/Problematic_extensions
*for a Google Toolbar solution see https://support.mozilla.com/questions/837473

Problem with the MenuBar and how can i delete a own component out of the storage

Hello,
I opened this thread in the category "Flex Builder 2", but
under this category my questions fit better.
I have a problem with the MenuBar and a question to delete a
component out of storage.
1. We have implemented the MenuBar, which was filled
dynamically with XML data.
Sporadically it will appear following fault, if we "mousover"
the root layer.
RangeError: Error #2006: Der angegebene Index liegt
außerhalb des zulässigen Bereichs.
at flash.display::DisplayObjectContainer/addChildAt()
at mx.managers::SystemManager/
http://www.adobe.com/2006/flex/mx/internal::rawChildren_addChildAt()
at mx.managers::SystemManager/addChild()
at mx.managers::PopUpManager$/addPopUp()
at mx.controls::Menu/show()
at mx.controls::MenuBar/::showMenu()
at mx.controls::MenuBar/::mouseOverHandler()
Here a abrid ged version of our XML to create the MenuBar:
<Menuebar>
<menu label="Artikel">
<menu label="Artikel anlegen" data="new_article" />
<menu label="Artikel bearbeiten" data="edit_article" />
<menu label="Verpackung">
<menu label="Verpackung anlegen" data="new_package" />
<menu label="Verpackung bearbeiten" data="edit_package"
/>
</menu>
<menu label="Materialgruppe">
<menu label="Materialgruppe anlegen"
data="new_materialgroup" />
<menu label="Materialgruppe bearbeiten"
data="edit_materialgroup" />
</menu>
</menu>
</Menuebar>
It is a well-formed XML.
2. Delete a component out of storage
We have some own components (basically forms), which will be
created and shown by an construct e.g.
var myComponent : T_Component = new T_Component ;
this.addChild(myComponent)
Some of our forms will be created in an popup. On every call
of the popup, we lost 5 mb or more, all childs on the windows will
be removed by formname.removeAllChild();
What cann we do, that the garbage collector will dispose this
objects.
Is there a way to show all objects with references (NOT
NULL)?
I have read in the Flex Help, that
this.removeChild(myComponent) not delete the form and/or object out
of the storage.
Rather the object must be destroyed.
It is sufficient to call delete(myComponent) about remove
this object out of the storage as the case may be that the
garbage-collector remove this object at any time?
Or how can I destroy a component correctly. What happens with
the widgets on this component e.g. input fields or datagrids?
Are they also being deleted?
Thanks for your help.
Matze

If you mena the "photo Library" then you cannot delete it.
This is how iphone handles photos. There are not two copies. There a re simply two places from which to access the same photos. ALL photos synced to iphone can be accessed via Photo Library. Those same pics can be accessed via their individual folder.

Problem with OCI call and how to install and use 'DEBUG_EXTPROC' on Linux

Hi,
Can any one let me know how I can install and use this debug_extproc package. I have installed oracle XE server on Linux machine(32-bit).
When I use : DEBUG_EXTPROC.STARTUP_EXTPROC_AGENT' ... i get an error saying that : it is not declared.
I tried looking in all the directories but did not find the dbgextp.sql(which is required in order to install that package).And tried searching on google but could not get any relevant information.
Also I am newbie to OCI call interface and also to C programming too: I have coded a external procedure or custom user aggregate in C. But since I was using C++ : 'set' STL. I have compiled my program using g++ instead of gcc and I have correspondingly modified the make file in public/demo directory.
So, is it fine to do it that way: using OCI (instead of OCCI(C++)) but again compiling the pgm as a regular C++ using g++ instead of gcc.(But rest of the pgm including printf statements : everything is in C).
Also I have created the library from my : custagg.so library:
SQL> create or replace library custagg is '$ORACLE_HOME/lib/custagg.so'
But my aggregate function implemented as external C function using OCI is either not recognised or else : if recognized then there is some error because of which i am getting the following errors : ORA-06522
SQL> select MinDistance(TT) from egg1;
select MinDistance(TT) from egg1
ERROR at line 1:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: /usr/lib/oracle/xe/app/oracle/product/10.2.0/server/lib/custagg.so:
cannot dynamically load executable
Please kindly answers my queries and trying to resolve this for almost 4 days now and could not find any clue on how to get this done.
Thanks,
-NN

#/bin/make
# Make file for OCI,OCCI and ODBC demos
# Usage :
# For compiling & linking the cdemo81.c file
# make -f demo_xe.mk buildoci CDEMOEXE=cdemo81 CDEMOOBJS=cdemo81.o
.SUFFIXES: .o .c .cpp
ICINCHOME=$(ORACLE_HOME)/rdbms/public/
ICLIBHOME=$(ORACLE_HOME)/lib
ICLIBPATH=-L$(ICLIBHOME)
THREADLIBS=-lthread
CCLIB=$(ICLIBPATH) -lclntsh $(THREADLIBS)
OCCILIB=$(ICLIBPATH) -locci -lclntsh $(THREADLIBS)
CCINCLUDES = -I$(ICINCHOME)
CCFLAGS=$(CCINCLUDES) -D_REENTRANT -g -xs
LDFLAGS=
SO_EXT=.so
EXTLDFLAGS=$(LDFLAGS) -shared
REMOVE=rm -rf
MKLINK=ln
MAKE=make
MAKEFILE=demo_xe.mk
CDEMOEXE=custagg.so
CDEMOOBJS=custagg.o
OCCIDEMO=occidml
OCCIOBJDEMO=occiobj
OTT=$(ORACLE_HOME)/bin/ott
OCCIOTTUSR=hr
OCCIOTTPWD=hr
ODBCDEMOEXE=odbcdemo
ODBCDEMOOBJS=odbcdemo.o
AQDEMOEXE=ociaqdemo00
AQDEMOOBJS=ociaqdemo00.o
EXTDEMO=extdemo2.so
CC=/usr/bin/g++
echo "LIBCLNT value is :" $(LIBCLNT)
echo "CC value is :" $(CC)
.c.o:
g++ -c -I$(ICINCHOME) $(CCFLAGS) $<
all: clean buildoci
echo "LIBCLNT value is :" $(LIBCLNT)
buildoci: $(LIBCLNT) $(CDEMOOBJS)
g++ -o $(CDEMOEXE) $(LDFLAGS) $(CDEMOOBJS) $(CCLIB)
echo "CC value is :" $(CC)
echo "LIBCLNT value is :" $(LIBCLNT)
clean:
$(REMOVE) $(CDEMOOBJS) $(CDEMOEXE)
# This port-specific file is currently empty on Solaris. Product
# lines may use this file to override compiler definitions and
# flags used in occi.mk.
# Linux compiler definitions
CC=/usr/bin/gcc
cc=/usr/bin/gcc
CCFLAGS=$(CCINCLUDES) -DLINUX -D_GNU_SOURCE -D_REENTRANT -g
LDFLAGS=-g
# This macro CCINCLUDES has to be redefined on Linux because of
# the existence of the 'new' directory in t_work. The name new
# clashes with a system header file.
CCINCLUDES = -idirafter .
THREADLIBS=-lpthread
ifdef BUILD_CCC296
CC=/usr/bin/g++296
endif
And I am executing the make file using the command :
make -f demo12.mk buildoci CDEMOEXE=custagg.so CDEMOOBJS=custagg.o
I am not getting any error while running this make file.
Can you please tell me whether PLSQL/Oracle is able to locate the file or not. Incase, if it is locating the file but due to some error in the custagg.so it is throwing that error. If this is the case, is there any way that i can debug the C program .....how can i install the debug_extproc package.. I am really new to C & OCI ... if the custagg.so is being located then there might be some problem with the way I am dynamically allocating memory to some variables.
Please kindly reply to this Post/response.
Please let me know if you also want to see my program code.
Thanks & Regards,
-NN

HT1725 I purchased two CD's on Sunday and both have problems with jumping tracks. How can I redownload?

I purchased two CD's and both have problems with some of songs jumping tracks. It does this on my computer and on the Ipod. How can I redownload the purchases?

You would have to put all of the music on one computer.
You cannot sync music from two computers to your iphone, it must all be on one computer.

Problems with LR 3.6 ~ how do I go back?

Similar Messages

Maybe you are looking for