Problems with LR4 - Develop Module - Edit in CS5

I've just upgraded from LR3 to 4
When I make adjutments on a RAW or JPEG file in the develop module, and then send it to PS5 for more work, not all the adjustments show up in CS5.
Example, I cropped an image, and then made local exposure adjustments using the 'brush' tool.
Exported to CS5 using 'Photo' 'Edit in', and the image goes to CS but only the crop adjustment is showing.
I've done all the updates on CS, but this is a pain.
I'm running a MAC with Snow Leopard OS
Can I uninstall the upgrade and reinstall..? Would that be any use...??

I was greatly confused by all this for a while, but think I finally figured it out, thanks to CSS Simon and others here (I'm new to Lightroom, having only used Ps/ACR previously).
What happens is that "render using Lightroom" doesn't involve ACR at all. It goes straight to Photoshop (and puts the rendered file alongside the raw). The other option, "open anyway", renders the file through ACR. But ACR 6.6 and before can't read PV2012, that's why you need to install the ACR 6.7 Release Candidate, which can (although it doesn't give you access to the 2012-specific sliders).
Another thing that tripped me up at first was that no Lightroom edits at all would show up in Bridge or ACR, even with ACR 6.7 installed. I finally discovered that I had to set Lightroom catalog settings to "automatically write metadata changes to xmp" - otherwise all Lightroom edits would just exist in the Lightroom catalog and not be visible to other applications.
This is of no importance if you only use Lightroom, but it certainly is if you have a mixed workflow with Photoshop and Bridge.

Similar Messages

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I h

I'm having trouble with the develop module in LR5.4. Any adjustments are taking effect, but only viewable in the filmstrip, not on the main photo. The navigator will go grey, as does the main area too. This applies to all edits done in develop module. I have posted several times on the forum with no responses to address this, and have seen others with the same issue. I have even gone as far as to do a complete re-install of LR5, with no success. I'm at a loss, and I depend on it for so much editing. Please help.

Reset your preferences file: Resetting (or 'Trashing') the Lightroom Preferences file - Lightroom Forums
Report back if that doesn't work.

ITunes has stopped working. Problem with iTunes Helper Module

After i installed the 7.3.1 iTUNES update for my windows VISTA, i keep getting iTunes has stopped working, and a message saying there is a problem with iTunes Helper Module.. I've tried to re-install and everything.. Can anyone help me out?

here you go
Problem signature
Problem Event Name: APPCRASH
Application Name: iTunesHelper.exe
Application Version: 7.3.1.3
Application Timestamp: 468d67e8
Fault Module Name: QuickTimeStreamingAuthoring.qtx
Fault Module Version: 7.2.0.240
Fault Module Timestamp: 4684a83a
Exception Code: c0000005
Exception Offset: 00016c09
OS Version: 6.0.6000.2.0.0.768.3
Locale ID: 1033
Additional Information 1: 18fe
Additional Information 2: f42ba5cd8b2ed31f18b99a5ea46137af
Additional Information 3: 4735
Additional Information 4: ae0a749503b699b3b75d581a3dbfd557
Extra information about the problem
Bucket ID: 466198587

Performance problem with OLE_FLUSH_CALL function module

Hello Everyone,
I am facing problem with OLE_FLUSH_CALL function module (execution is taking long time which is going to be dump error).
Could you please help me in knowing solution for this problem?
Thanking you in advance.
Srinivas

Hi Srinivas,
the OLE_FLUSH_CALL does an RFC from ABAP backend to frontend UI. So high execution time could result from high network time, for example latency between UI and backend server.
How many UI interaction steps did you measure for the trace above? Ideally, there should only be one OLE_FLUSH_CALL per user interaction step. If its more, the application is not written in an optimized way.
Best Regards, Randolf

Could not complete the ... command because of a problem with the filter module interface

I just reinstalled Photoshop CS6. I'm running OS X 10.8.2 .
I use the Nik plugins suite, and reinstalled them as well. Now whenever I try to use one of those plugins I get the error "Could not complete the ... command because of a problem with the filter module interface."
The reinstallation was a bit of a struggle due to issues on Adobe's end, and I am hesitatnt to just dive in and reinstall without wome idea as to what might cause these errors.
Any insight appreciated.
Stu

Not sure I know what you mean by "disabling the Nik filter folder".
I have the latest updates for the Nik filters and they are compatible with CS6.
Since yesterday I tried uninstalling the Nik filters, manually locating and removing every file related to Nik/Nik Software, redownloading the Nik installers, uninstalling/reinstalling Photoshop, and reinstalling the Nik filters. Same result.
I am pretty sure this is something on the Photoshop end, but am not sure what to do next. Maybe repeat the above and use the Creative Suite cleaner before reinstalling?
Stu

Can't use certain filters- "problem with the filter module interface"

Hello,
I frequently use the BPelt Flatten and Multifill plugins and they have always worked perfectly until today. Now I get the following error: "Could not complete the [Multifill/Flatten] command because of a problem with the filter module interface."
I use Photoshop CS6 Extended with the Creative Cloud membership, and just recently updated to version 13.1.1 x64. I believe this may be related, as the plugins worked before the update and nothing else has changed. Any recommendations on how to fix this? Is it possible to undo the update?

Usually this means a bug in the third party plugin that you are using.

Problem with BAPI_SALESORDER_CHANGE function module

I know lot of posts have been done about problems with this function module. However I was not able to find the answer to my problem. Hence posting a new thread
I have the following code which changes the reason rejection (if required to 'ZF') and also updates the sales order quantity.
The code works absolutely fine as long as the PGI date of the order item is either today or in the future. However if the PGI date of the order item is in the past. I get an error in the t_return table with error type 'E' saying 'PGI date is in the past hence could not update the item'.
If I try to update the same order quantity in VA02 for the item with PGI date in the past it does so without any problem.
Can someone please suggest what the problem might be. Or if there is some other way I can update the quantity. (I dont want to use BDC)
FORM change_sales_order_item USING value(r_rtb_posnrs) TYPE zpsd_ztsdrtb_ro_track
                             CHANGING r_return TYPE type_t_bapiret2.
DATA: v_order_header_in TYPE bapisdh1,
v_order_header_inx TYPE bapisdh1x,
t_schedule_lines TYPE bapischdl OCCURS 0 WITH HEADER LINE,
t_schedule_linesx TYPE bapischdlx OCCURS 0 WITH HEADER LINE,
v_temp_rtb_vbeln TYPE vbeln,
v_temp_rtb_posnr TYPE posnr,
wa_old_rtb_posnrs TYPE ztsdrtb_ro_track,
t_item_in TYPE bapisditm OCCURS 0 WITH HEADER LINE,
t_item_inx TYPE bapisditmx OCCURS 0 WITH HEADER LINE,
v_rtb_old_vbeln TYPE zrtbvbeln,
v_rtb_old_posnr TYPE zrtbposnr,
v_ro_old_vbeln TYPE zrovbeln,
v_ro_old_posnr TYPE zroposnr,
v_rtb_count TYPE i,
v_next_row_index TYPE i,
v_update_order_flg TYPE char1, "Update the sales order flag
v_rtb_record_counter TYPE i,
v_original_vbeln TYPE vbeln,
t_bapiret TYPE STANDARD TABLE OF bapiret2.
FIELD-SYMBOLS: <wa_r_rtb_posnrs> TYPE ztsdrtb_ro_track,
                 <wa_r_rtb_posnr_next> TYPE ztsdrtb_ro_track.
CONSTANTS: c_updateflag TYPE bapisditmx-updateflag VALUE 'U'.
v_order_header_inx-updateflag = 'U'.
Get rid of the duplicate records for the same RTB order. Just use
the last record quantity in the internal table
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    <wa_r_rtb_posnrs>-seqnr = v_rtb_record_counter.
ENDLOOP.
SORT r_rtb_posnrs DESCENDING BY zrtbvbeln zrtbposnr seqnr zrtbconsumedflg.
DELETE ADJACENT DUPLICATES FROM r_rtb_posnrs COMPARING zrtbvbeln zrtbposnr.
DESCRIBE TABLE r_rtb_posnrs LINES v_rtb_count.
v_rtb_record_counter = 0.
v_update_order_flg = space.
LOOP AT r_rtb_posnrs ASSIGNING <wa_r_rtb_posnrs>.
    v_rtb_record_counter = v_rtb_record_counter + 1.
    v_update_order_flg = space.
Popluate the item quantity update flags for schedule lines
    t_schedule_linesx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_linesx-sched_line = '0001'.
    t_schedule_linesx-updateflag = c_updateflag.
    t_schedule_linesx-req_qty = 'X'.
    APPEND t_schedule_linesx.
    CLEAR t_schedule_linesx.
*Item (Order QQuantity Field to be changed "KWMENG")
    t_schedule_lines-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
    t_schedule_lines-sched_line = '0001'.
    t_schedule_lines-req_qty = <wa_r_rtb_posnrs>-zrtbchgqty.
    APPEND t_schedule_lines.
    CLEAR t_schedule_lines.
If fully consumed then set the rejection flag
    IF <wa_r_rtb_posnrs>-zrtbconsumedflg = 'X'.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = 'ZF'.
      APPEND t_item_in.
      CLEAR t_item_in.
    ELSE.
      t_item_inx-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_inx-updateflag = 'X'.
      t_item_inx-reason_rej = 'X'.
      APPEND t_item_inx.
      CLEAR t_item_inx.
      t_item_in-itm_number = <wa_r_rtb_posnrs>-zrtbposnr.
      t_item_in-reason_rej = ' '.
      APPEND t_item_in.
      CLEAR t_item_in.
    ENDIF.
If you have reached the last line of the RTB intern table update the sales order
*Index pointing to the next row
    v_next_row_index = v_rtb_record_counter + 1.
    IF v_rtb_record_counter = v_rtb_count.
      v_update_order_flg = 'X'.
    ELSEIF v_rtb_record_counter < v_rtb_count.
Get the next row data
      READ TABLE r_rtb_posnrs INDEX v_next_row_index ASSIGNING <wa_r_rtb_posnr_next>.
      IF sy-subrc = 0.
        IF <wa_r_rtb_posnrs>-zrtbvbeln <> <wa_r_rtb_posnr_next>-zrtbvbeln.
          v_update_order_flg = 'X'.
        ENDIF.
      ENDIF.
    ELSE.
      v_update_order_flg = space.
    ENDIF.
update the rtb orders with quantities and the rejection flag (if required)
    IF v_update_order_flg = 'X'.
      CALL FUNCTION 'BAPI_SALESORDER_CHANGE' STARTING NEW TASK 'SOUPDATE'
        PERFORMING callbk_bapi_salesorder_change ON END OF TASK
        EXPORTING
          salesdocument    = <wa_r_rtb_posnrs>-zrtbvbeln
          order_header_in = v_order_header_in
          order_header_inx = v_order_header_inx
        TABLES
          return           = t_return
          schedule_lines   = t_schedule_lines
          schedule_linesx = t_schedule_linesx
          order_item_in    = t_item_in
          order_item_inx   = t_item_inx.
      WAIT UNTIL t_return[] IS NOT INITIAL.
      READ TABLE t_return INTO wa_return WITH KEY type = 'E'.
      IF sy-subrc <> 0.
      ELSE.
        r_return[] = t_return[].
        MESSAGE ID 'ZSD' TYPE 'E' NUMBER 613.
       RAISE errorinorderupdate.
      ENDIF.
      REFRESH t_schedule_linesx.
      REFRESH t_schedule_lines.
      REFRESH t_item_in.
      REFRESH t_item_inx.
      REFRESH t_return.
    ENDIF.
ENDLOOP.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
   IMPORTING
     return = t_bapiret.
ENDFORM.                    "Change_Sales_Order

see the following example and try to do this:
i_hdrx-updateflag = 'U'.
*" Fill required SCHEDULE_LINES data.
i_sched-itm_number = p_posnr.
i_sched-sched_line = p_etenr.
i_sched-req_qty = p_reqqty.
i_schedx-updateflag = 'U'.
i_schedx-itm_number = p_posnr.
i_schedx-sched_line = p_etenr.
i_schedx-req_qty = 'X'.
APPEND i_sched.
APPEND i_schedx.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = p_vbeln
order_header_in = i_hdr
order_header_inx = i_hdrx
TABLES
return = i_ret
schedule_lines = i_sched
schedule_linesx = i_schedx.

LR4 & Develop Module crashing with amber rectangle

2010 MBP w Snow Leopard (hard drive) & Lion 10.7.3 (SSD) - problem occurs on both installations
--removed prior LR installation (application, app support files in root & user Libraries, Preferences)
--made sure there are no plug-ins (even disabled PS CS5 plug-ins)
--transferred the handful of user fonts to disabled fonts (there was nothing exotic)
--have repaired permissions
--run Disk Warrior
--reinstalled LR
--created a new user account
All of the above to no avail. The strange thing is that I was able to import about 113K files from Bridge and work with them for several days. I did three new shoots which Lightroom handled cleanly. Now I can't access the files to complete editing them. The only intervening change that I can think of is an otherwise smooth upgrade to 10.7.3 using the combo-updater. Yet the problem also exists on my 10.6.8 partition.
As an experiment, I tried clicking on the Develop module in an empty catalog and noticed similar pre-crashing behavior by LR. The entire preview strip (in this case, empty) became highlighted with a solid amber rectangle, although LR didn't crash. I don't recall this happening when LR was functional a few days ago. Here's a screenshot. Is it the images in the catalog that are causing the crashing? If so, what can one do to access them?
I can provide diagnostic logs if they are helpful. Thanks for any suggestions.

I've read a number of threads on this issue. The one thing that I haven't been able to do is to turn off automatic CA correction which requires being able to use the Develop module.
I'd like to explore this product but am at a loss as to how to proceed. Perhaps the reports of frequent crashing represent a minority of the beta testers such that over the last month, Adobe has gotten a lot of useful feedback to refine Lightroom 4.
My individual experience, having lost the better part of two days to this, however, suggests that LR4 isn't close to being stable enough for beta testing purposes. It has gotten silly. I'm returning to Bridge until the smoke clears.

Problem with CRM_ROLES_OF_USER_GET function module in BW3.5

Hi,
We have a problem in the standard function module. CRM_ROLES_OF_USER_GET. This should get the latest roles of the user but it is reading from Buffer and displaying all the old roles.
How can i clear the buffer so that this function module will return the latest roles not the old roles.
Thanks
Naveen

Hi,
Let me clear my problem once again.
-->Home page i.e. P2 does not use authorization, So it is displayed along with text item :p2_user_privilege.
-->Then user click on one of the links , Now page :P70: should get displayed.
P70 is using authorization scheme.
-->But :p2_user_priviledge value is not accessible at authorization scheme, I dont know why.
I could not find out where to create Application item , as suggested by you.
& not able to find Developer menu , session at home page as suggested earlier.
And one more question, my application at runtime display
X en us
at bottom
How to make it
USER: X Language: en us
Like in development environment.
Hope I have cleared my problem, waiting for reply.
Edited by: TEJU on Nov 17, 2008 9:25 AM

Problem with application developed with vtapi(Vt Systems) - events

Hello!
I'm developing aplication based on api prepared by VT Systems (http://www.cmsfx.com/en/trading-software/download-vt-trader/download-vt-trader-api/).
This api is used to perform forex transactions. I've written a Web
Service which connects with this api and
alows other modules of my application to perform transactions. I'm
using JAX-WS and Sun Java Application Server.
This is sample of Web Service :
@WebService()
public class ForexService{
protected static VT_API api;
Checker checker;
String userName = "***";
String userPassword = "***";
ConstRecord constants;
public static IVT_APIEventsAdapterExtended events;
public void initAPI(){
try{
System.loadLibrary("bridge2java");
OleEnvironment.Initialize();
api = new VT_API();
api.setForceDisableSSL(false);
events = new IVT_APIEventsAdapterExtended(api);
api.addIVT_APIEventsListener(events);
constants = new ConstRecord();
}catch(Exception e) {
e.printStackTrace();
public ForexService(){
initAPI();
logonResult = api.Login(userName, userPassword, 0) ;
System.out.println("Rezultat logowania: " + logonResult);
checker = new Checker(this);
new Thread(checker).start();
@WebMethod
public String getLogonResult() {
return new Integer(logonResult).toString();
@WebMethod
public String getServerList(){
return api.GetServerList();
I'm using event listener which was attached to Java Sample in
documentation.
public class IVT_APIEventsAdapterExtended extends
IVT_APIEventsAdapter{
private VT_API api;
public IVT_APIEventsAdapterExtended(VT_API apiInstance) {
api = apiInstance;
public void
OnInstrumentChange(IVT_APIEvents_OnInstrumentChangeEvent e)
super.OnInstrumentChange(e);
System.out.println("instrument change - " +
e.get_InstrumentID());
public void
OnNewServerMessage(IVT_APIEvents_OnNewServerMessageEvent e)
super.OnNewServerMessage(e);
System.out.println("Server message :" +
api.get_ServerMessages().get_Items(e.get_MsgID()).get_Text());
I've problem with listening events incoming from forex server. When I
run Wireshark(Network Protocol Analyzer) I can see that events income
to my computer (on different ports - for example: 2070, 2071, 2072),
but don't income to Sun Java Application Server. I suspect that server
don't listen on this ports, but how can I fix this? Maybe should I
choose a other server? I've tried also Tomcat -with similar result :(
Regards,
Peter
//Sorry for my english :)

Thank you very much for the reply :-)
We have been fiddling with the platform on many levels yesterday, and one thing we did do was bump that value up from 1024 to 8192... This made a HUGE improvement in ensuring the platform now holds the live streaming connections. (up to 8000 per edge)
I think for other future reference and to aid other people that might run into this problem in the future, its a good idea to increase this value. From what we have seen, read and heard, that default value is fairly conservative, its suppose to grow when the load demands it, however, if you have a large scale of connections coming in at once from multiple locations, it can happen that it grows too quickly which can result in the application to be reloaded (which disconnects all users, i.e. all edge servers connected to this origin).
Another option we were recommended to modify was the following :
In adaptor.xml you currently have this line:
<HostPort name="edge1" ctl_channel="localhost:19350" rtmfp="${ADAPTOR.HOSTPORT}">${ADAPTOR.HOSTPORT}</HostPort>
You can set this to
<HostPort name="edge1" ctl_channel="localhost:19350" rtmfp=":80">:80</HostPort>
<HostPort name="edge2" ctl_channel="localhost:19351" rtmfp=":1935">:1935</HostPort>
This will create two edge processes for both ports 80 and 1935. Currently both ports are served from the same fmsedge process.
Of course this is not a huge performance improvement, but should further distribute load over more processes which is a good thing. Especially when there are that many connections.
This setting can be made on all machines (origin + edge)
Hopefully this could help other people also running into the same problems we have seen ...

Problem with ALV grid in edit mode

Hello, gurus!
I have a problem with ALV-grid. Sometimes when I call F4 help for a cell, data is inserted in a different cell. And when I call check_changed_data method, my internal table (passed to ALV-control in set_table_for_first_display) does not updates properly. In what can be a problem?
Thanks,
Mikhail

Hi Prabhu,
MODULE pbo_100 OUTPUT.
SET PF-STATUS 'MAIN100'.
title_of_report = text-010.
SET TITLEBAR '0100' WITH title_of_report.
DATA: g_event_receiver TYPE REF TO lcl_event_handler.
IF z_custom_container IS INITIAL .
    CREATE OBJECT z_custom_container
      EXPORTING
        container_name = 'ALV_ZAC'.
    CREATE OBJECT alv_grid
      EXPORTING
        i_parent = z_custom_container.
    g_repid = sy-repid.
    gs_variant-report = g_repid.
    x_save = 'A'.
    PERFORM check_alv_grid_fields.
    ps_layout-cwidth_opt = 'X'.
    ps_layout-edit = 'X'.
    CALL METHOD alv_grid->set_ready_for_input
      EXPORTING
        i_ready_for_input = '1'.
*    CALL METHOD alv_grid->register_edit_event
*      EXPORTING
*        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    APPEND   s_list_rec   to it_list_rec.
    CALL METHOD alv_grid->set_table_for_first_display
      EXPORTING
        is_layout       = ps_layout
        is_variant      = gs_variant
        i_save          = x_save
      CHANGING
        it_fieldcatalog = pt_fieldcat
        it_outtab       = it_list_rec[].
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_enter.
    CALL METHOD alv_grid->register_edit_event
      EXPORTING
        i_event_id = cl_gui_alv_grid=>mc_evt_modified.
ENDIF.
FORM check_alv_grid_fields .
DATA: ls_fcat LIKE LINE OF pt_fieldcat.
REFRESH pt_fieldcat .
CLEAR: ps_layout, ls_fcat.
ls_fcat-fieldname = 'VBELN'.
ls_fcat-ref_field = 'VBELN'. ls_fcat-ref_table = 'LIPS'. " .
ls_fcat-outputlen = 9.
* ls_fcat-datatype   = 'CHAR'.
* ls_fcat-inttype    = 'C'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ls_fcat-fieldname = 'ERDAT'.
ls_fcat-ref_field = 'ERDAT'. ls_fcat-ref_table = 'LIPS'.
ls_fcat-outputlen = 9.
* ls_fcat-f4availabl = 'X' .
* ls_fcat-datatype   = 'DATS'.
* ls_fcat-inttype    = 'D'.
APPEND ls_fcat TO pt_fieldcat.
CLEAR: ls_fcat.
ENDFORM.                    " check_alv_grid_fields
FORM save_p .
CLEAR l_valid.
CALL METHOD alv_grid->check_changed_data
    IMPORTING
      e_valid = l_valid.
IF l_valid IS INITIAL.
    CALL FUNCTION 'POPUP_TO_INFORM'
      EXPORTING
        titel = text-i01
        txt1 = text-i02
        txt2 = text-i03
        txt3 = text-i04.
ELSE.
    i_dat_reg = zrumm_prr-cdprr.
    CLEAR is_temp_otc.
    freshit i_prrpus_fax.
    freshit i_list2_ot.
    LOOP AT it_list_rec INTO s_list_rec.
      MOVE-CORRESPONDING s_list_rec TO i_list2_ot.
      i_list2_ot-fgrup = 'RECE'.
      i_list2_ot-prrnu = i_num_prr.
      APPEND i_list2_ot.
      MOVE-CORRESPONDING s_list_rec TO i_prrpus_fax.
      APPEND i_prrpus_fax.
    ENDLOOP.
ENDIF.
Edited by: Mikhail Sarychev on Mar 16, 2011 6:41 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM
Edited by: Mikhail Sarychev on Mar 16, 2011 6:49 AM

LR5 upgraded catalog is only giving LR4 Develop module options - help!

After a successful upgrade to LR5 from LR4 on an old catalog I'm encountering an unusual situation:
when I use the Develop module the palette options are not LR5.
Instead of Shadows, for example, my LR5 catalog is showing Recover and Fill Light from LR4.
I'm working on a MacPro tower and the catalog in question is on an external hard drive.
I've checked the upgrade status and it is definitely a LR5 upgraded catalog.
I've upgraded many catalogs over the years from LR1 to now and this is the first time I've
seen this issue.
Any suggestions appreciated.

You are working with images that were processed with an older version of Lightroom and process 2010. Lightroom honors those previous adjustments and retains the 2010 process. To change to the new 2012 process go to the calibration tab in the develop module and make the appropriate choice.

Problem with the function module SO_DOCUMENT_SEND_API1

Hi Friends,
I am facing the problem wiht the function module SO_DOCUMENT_SEND_API1,
My actull requirement is : - i need to send the sap data to my externa mail id (Like as XYZ@) with out the any attachment , So i have implemented the code with the function module SO_DOCUMENT_SEND_API1.
The mail has successfully sent the sap inbox (SOST) but the mail are not reached to the external mail ID'S( XYZ@GMAIL)
i Have maintained my code lines same as below.
CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
    EXPORTING
      document_data = wa_doc_data
      put_in_outbox = ca_x
      commit_work   = ca_x
    TABLES
      packing_list = tb_packing_list
      contents_txt = tb_mailbody
      receivers     = tb_receiver.
Can you please tell me soultion ,
Thanks
charan.

Hi charan,
                  If u r able to see the mail in sost, then i think ur code has worked fine. if the mail is not going to outside domains from sost u need to do some configurations for that, u can find lots of configuration docs regarding mail setup in sap.
once try to pass below parameter also.
t_receivers1-rec_type = 'U'.
For configuring mail setup u need to sit with ur basis guy.
Moderator message: please do not use SMS speak.
Edited by: Thomas Zloch on Nov 23, 2010 5:51 PM

Problem with screen size in Premiere Pro CS5?

I'm making a movie in Premiere Pro CS5 and I've ran into a problem with the screen size. The source screen shows my footage in widescreen (16:9) but my project screen is playing the widescreen footage in standard size (4:3) so it is cutting off some of the footage from the screen. I would like to make my entire project standard size so how do I do that? (Most of the chopped off footage was adjusted in After Effects so does that have anything to do with it?)
Thanks for any help you can give!

The properties of the footage are:
872 x 486
00;00;25;00, 29.97 fps
48000 Hz - 32-bit Float - Stereo
The properties of the sequence are:
Editing Mode: DV NTSC
Timebase: 29.97 frames/second
Video:
Frame Size: 720 horizontal 480 vertical 4:3
Pixel Aspect Ratio: D1/DV NTSC (0.9091)
Fields: Lower Field First
Display Format: 30fps Drop-frame Timecode
Audio:
Sample Rate: 48000 Hz
Display Format: Audio Samples
Video Previews:
Preview File Format: NTSC DV
Codec: DV NTSC
Width: 720
Height: 480
I'm also quite a beginner at Premiere Pro and basically all the Adobe programs, so are there any good websites (preferably free) that give good help and information for beginners like me?
Thanks!

SAP NW Developer Studio: Problem with Import Development Configuration(DC)

Dear Experts!
I have a problem with SAP NetWeaver Developer Studio when import a Developement Configuration.
I create a Software Component(SC) in SLD( with Dependencies: SAP J2EE Engine, SAP Java Tech Service, DI BUILD TOOL, Then I create a Development Configuration(DC) and add this SC.
On SAP Netweaver Developer Studio I import this DC. I see on the Component Browser My DC include: my software conponent , and SCs: SAPJEE, SAP_BUILDT, SAP_JTECHS but in DC detail there are nothing. So I cannot create the Development Component
Please help me resolve this issue.
Thanks all

Hi,
you cannot see the DCs (for SCs like SAPBUILDT, JTECHS, JEE, etc) in NWDS, because there is nothing imported into the buildspace(s) DEV (and cons).
You need to go to the http://<host>:<port>/devinf -- CMS webui, to the Transport Studio, go to the Check-in tab, and check-in all the software you can see in the queue (which you have also added previously in SLD for your software) . This is a quick process, you'll see your software moved to the Development tab and waiting for import.
Import all the components. This can take longer. As soon as all of them finished, you can open up your NWDS again. In order to see the DCs this time when you expand the corresponding node, you need to reimport (but at least) update the development configuration (you do it in NWDS in the context menu of the development config in question).
Best Regards,
Ervin
Edited by: Ervin Szolke on Sep 2, 2010 1:26 PM

Problems with LR4 - Develop Module - Edit in CS5

Similar Messages

Maybe you are looking for