Problems with Mac OS X Server and webperfcache...

I'm running Mac OS X server 10.4.11 and I'm trying to get mod_rewrite to work (thus far unsuccessfully). As part of my debugging strategy I want to turn everything around apache off and start pulling things apart to see if I can get them to make sense. When I turn the web performance cache off on all my sites using the site administration utility, apache gets a bus error when it attempts to restart. When I turn web performance caching back on, apache continues to get a bus error. Reboots, et al. don't clear up the problem and all I can do is go back to my system backup and bring up the previous day's version, which I can currently live with.
Has anybody seen this before? Alternatively, has anybody had problems getting mod_rewrite to work and can give some advice. I'm doing pretty much everything that works on other U*x based systems and has worked before, but the lack of control over the ports used by the web sites on my system is problematic and I would, at the very least, like to be able to turn off webperfcache.
Thanks in advance,
Dick Munroe

I am actually going to be doing almost exactly the same thing in the next 1-2 weeks. My plan is to make the OS X server a BDC on the domain, then promote it to PDC and retire the Windows Server 2k3 PDC.
I have 1 Win2k3 PDC and 1 Win2k3 (64-bit) Terminal Server. My main worry is whether the PDC is handling the licence CALs for the TS.... if it is, that will interfere with the plan.
Email me and let's discuss this off-line.
Thanks,

Similar Messages

Problem with Mac Mail-iMap server on Hosting (Overloading Server)

Hello, I just created an account with HostGator for my business and we have 6 emails. We have imap email and our account allows us to check email once per minute per email. We have it set up to check every 5 minutes so this should not be a problem.
They then told us that there was a problem with it checking more frequently and also overloading the server by issueing 'multiple imap commands per email, 3 to 4'. I can view our server processes and sure enough each email is showing 4 imap commands. I unchecked 'use IDLE command" since I know IDLE command has something to do with it checking frequently for email.
Unfortunately we have 3 processes running on our website so once we had 24 for the 6 emails that goes over our limit of 25 and our website goes down. For now we have had to turn off most of our emails except 2 that we receive most email at which is causing major problems.
When we talked to HostGator that question was "Do you use Mac mail? Mac Mail is knowing for doing that". Since I only use Mac's I don't want to have to switch to Windows for email or use another email program like Entourage or Thunderbird. This is a frustrating issue and when I did research on Google I saw a lot of other people having this issue but didn't see any answers. Any ideas what is causing this and how I can fix it?

Hi,
IMAP IDLE is not the problem - it is even good! http://en.wikipedia.org/wiki/IMAP_IDLE
I have also an unanswered similar Post some hours ago: http://discussions.apple.com/thread.jspa?threadID=1957241&tstart=15
paranoja

Incompatibility problems with mac mini MA206LL/A* and linksys WRT610N

i purchased a new wrt610n and one of the machines that is connected is a mac mini, 1.66 ghz intel core duo.
#ma2066/ll/a for those who want to compare notes. the computer is stock with the 802.11g wireless card that came with the machine. it is running the current software and all the updates are up to date.
i am using wpa 2 personal w / aes
their is some kind of incompatibility or issue between the wrt610n and the mac mini.
either using the wireless connection OR connected directly to the router, web pages are very slow to load. sometimes it can take up to 45 seconds for the mac mini to open up a webpage. for 45 seconds it is at 'contacting website'
when i try to run software update, i get a time out error -1001, make sure you can connect to the internet and try again.
hulu desktop is also running slow.
copying a file from the mac mini to a another computer over wifi averages about 1 mb/s
when i informed linksys about this problem, they took my phone number and said that a linksys Technician / senior tech support employee would call me back. that was a day or so ago. i asked if i can have any newer firmware, considering the latest is 5 months old.
i am considering returning this router, but i don't see a lot of good alternatives that have similar features. i have 21 days to return this. the restocking fee will be 15% i am also considering various 802.11n solutions for the mac mini, even including the dell 1500 wireless mini card, i heard it works as an airport card.
if i do get a different model router i would like external antennas.
my previous router was a 5 year old wrt54gs version 2.0, and it never had a problem with any of the computers with the network.
the trouble shooting steps involved changing the beacon to 75 and the mtu to something else, i forgot. it did not make a difference.
i moved the mini and connected it wired to the wrt610 and turned off the airport wireless card and there was no improvement.
when i disconnected the wrt610n and connected the mac mini directly to my dsl modem. the issues were suddenly gone.
theres some kind of problem with this particular unit. and i would like to hear from others who have solved this or are experiencing the same problem

Just out of curiosity: what internet provider do you have? I'm just asking since I had similar issues after switching from AT&T DSL to AT&T U-verse. Sometimes pages took a very long time to load, or just a part or image of the page. Sometimes I would get a page not found error or something like this and only refreshing the page several times would retrieve and display the actual page.
Here's what I did: I went into my iMac's network preferences and switched the DNS server IP with one from OpenDNS.com, such as 208.67.222.222.
Since then I haven't had these issues anymore. Don't ask me why though; but I would be curious to hear whether this may fix your issue as well!

Problem with passive mode FTP server and NAT

Hi,
I have a problem with Passive mode FTP and NAT.
I am trying to run both an FTP server and sharing the Internet connection via NAT. I have by the way specified the passive ports to use in ftpaccess (65000-65534). Everything works fine until someone tries to connect via Passive mode. I have tracked the problem down to the firewall and the rule that handles NAT.
Firewall rule config without NAT:
00001 allow udp from any 626 to any dst-port 626
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
Firewall rule config with NAT
00001 allow udp from any 626 to any dst-port 626
00010 divert 8668 ip from any to any via en1
01000 allow ip from any to any via lo0
12300 allow ip from any to any
65535 allow ip from any to any
So, passive ports do not work when NAT is on. If I turn it off, Passive ftp works like a charm.
But how do I solve my problem? I have in my quest for the answer stumbled upon "-punch_fw" but do not know how to use it or if it even helps me at all?
Best regards,
Peter
B&W G3 Mac OS X (10.4.5)

Media/Lacrosse-1-tiny.3gp
I can't find the file on your server.
They may also need to edit the .htaccess file to allow the .3gp file extension be used. Call them.

Interesting problem with RAID, Windows 2008 server, and Ubuntu

sooooo, i got the system working and linux loved it. just adored it.
however, Windows did not. Windwos 2008 server hard locks from time to time. i fianlly figured out that it had to do with the RAID 0 i was running, that didn't really succeed.
However, when i rebuilt the RAID and everything on it, it refuses to recognize the disk, sayign that windwos cannot determine if this drive has a valid system volume on it.
Ubuntu 9.04 server, however, just took it and made it work great.
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable. Then i went back and redid the raid, and it did the original error.
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate. I went back to ubuntu, this time the desktop/workstation versions, and i am doing an alternate install with RAID...much to my disappointment becuase now i will have to use VirtualBox to isntall windows...and if that fails, i'll be really pissed.
My settings are as follows:
SATA Controller 0-5 enabled
NVRAID- enabled
PCI BUS SATA- Option ROM Enabled, Master Enabled, and 0040h latency
MAC LAN- same as above
MAC LAN1- has master disabled, but the other stuff is the same
Serial port A is on AUTO, B is disabled, and floppy is disabled.
Option Rom is PFA relocation.
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
thanks guys.

Quote
Also, my AEC A6880 is giving me a ROM expansion error, even though, in both OSes it can be seen....usualy. I just want to fix it
lastly, my LSI PCI-E scsi adapter is not being seen at ALL.
Turn off onboard raid ctrl 1st. There are conflicting.
Quote
I enabled the PCI Bus SATA to be Master in the BIOS, and then Windows Server 2008 said that it could not determine if the drive was bootable.
Known issue, partition mess:
http://www.google.bg/search?hl=bg&ei=W-l3Sq_4NMbdsgbHnKmmBQ&sa=X&oi=spell&resnum=0&ct=result&cd=1&q=windows+cannot+determine+if+this+drive+has+a+valid+system+volume+on+it.&spell=1
Quote
I inserted a windows xp disk, destroyed the RAID, and then installed the software on a NEW disk. While it installed fine, it gave me an IRQL_not_less_than_or_equal error. It boots in safe mode, but no where else. I tried installing the NVRAID and MCP55 drivers in safemode and what not, but still, it refused to cooperate.
What's the BSOD error? Are you using XP installation disk with included SP3?

Problem with a Oracle 8i Server and Oracle 8.0.4 Client

When I try retrieving data from my Oracle 8i Server using a Oracle 8.0.4 client, the data retrieved in varchar2 fields comes back in a different format than previousley. I also have setup an Oracle 7.3 client and an Oracle 8i client both of which bring the data back as expected.
If anybody has experienced this and can tell me whether this is a bug or is something I have setup incorrectly I would be most grateful.
Thanks in Advance
Andy

Can you quantify "different format"? I'm hard-pressed to imagine how many ways character data can be formatted.
Note that since Oracle 8.0.4 was desupported long ago, I'd strongly recommend upgrading at least to 8.0.6 and preferrably to 8i. If there is a bug at fault, you won't get a fix in 8.0.4.
Justin

Problem with Xsan 2.1.1 and Mac Os server 10.5.6

Hi,
We have a big problem with xsan 2.1.1 and Mac Os server 10.5.6.
- We have one server, is a Open Directory Master, and also is a metadata controller of xsan2. The Volumes of xsan2 are shares via afp, and the clients (moreless 50) connect with server via afp.
- We have some problems, one of them is:
odm fsm [341]: XSAN FSS 'VolDocs [0] ' : Invalid inode lookup: 0x7f80000000007e0 markers 0x0/0x0 nextiel 0x0
This message is always in the log. We stop the volume, and start cvfsck -wv, but dont have anything, how fix it??
- Another problem is with AFP service, suddenly the service stop, and the error is :
mds [58] (error) Server: Mach error queueing checkin to peer manager: (ipc /send) invalid port right.
-What of the meaning of (ipc/send) invalid port right??.
And the last error is:
-com.appelAppleFileServer [347] MDSChannelPeerRequest: (ipc/rcv) timed out.
Need Help please!.

My configuration:
- Master Directory:
Hardware Configuration:
Model: Xserve
Processor: 2x2,8 Ghz Quad-Core Intel Xeon
Memory 8 Gb
Disk: 70,04 Tb
Software:
Kernel Version: 9.6.0
System Version: Mac OS X Server 10.5.6
Xsan 2.1.1
Services: AFP, DNS, Open Directory RADIUS
Status: connected Users: 37
This server is the open directory Master and metadata controller of xsan2, but we have another server that is open directory replica and metadata controller of xsan2. The fisrt server have too many errors with afp, the service stop and the server is dead, and you must restart via terminal with the command sudo reboot. I dont know what happen, do you help me please?

How do I get connected to a server on my network via an IP address? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

I am new to Mac...How do I get connected to a server on my network via a hyper link IP address path? When I try to open in a URL and login as a registered user with proper login it errors out saying there was a problem with connecting to the server?

Some of the following is going to use some technical terms — this area is inherently somewhat technical.
If you don't understand some part of the following reply, please ask.
Is this your own OS X Server system on your own network, or is this some other server within some larger organization?
You're posting this in the OS X Server forum, which is a software package that allows OS X systems to provide web-based and many other services; to become servers.
If it's your OS X Server on your network, then the network and DNS configurations are suspect, or the server is somehow malfunctioning or misconfigured. This is unfortunately fairly common, as some folks do try to avoid setting up DNS services.
If it's a larger organization and somebody else is managing the server and the network, then you'll probably need to contact the IT folks for assistance; to learn the network setup and DNS requirements, and if there's a problem with the server itself.
The basic web URL "hyper link IP address path" — without using DNS — usually looks something the following, where you'll need to replace 10.20.30.40 with the IP address of your server:
http://10.20.30.40
UptimeJeff has posted a URL that specifies the AFP file system; an OS X file share. That's used if you're connecting to an Apple storage service somewhere on your network. You might alternatively need to specify smb://10.20.30.40 or such, if it's a Windows file server. (There can be additional requirements for connecting to Windows Server systems, too.)
If there's local IT staff available here, please contact them for assistance. If these are your own local systems and your own local OS X Server system, then some information on the server will be needed. (If you're on a NAT'd network, you'll also need to get DNS services configured and working on your local OS X Server system and your network — you'll not be able to skip this step and reference ISP DNS servers here — or things can and usually will get weird.)

I'm using mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts- I didn't have any problems with it before the upgrade and in safari I don't have this problem.

Hello, I'm using Mac with the newest operating system (snow leopard 10.6.7). since I've updated to Firefox 4 It doesn't display Hebrew fonts… I didn't have any problems with it before the upgrade and in safari I have no problem with it. please help me- I don't like to use safari a my browser...

elly903 wrote:
Before commenting - I CANNOT install Mavericks because it'll mess up the versions of Filemaker Pro and Quicken that I use regularly...
Quicken 2007 for Intel (Snow Leopard, Lion, Mt. Lion and Mavericks) for $15:
http://quicken.intuit.com/personal-finance-software/quicken-2007-osx-lion.jsp
It will input your Quicken PPC data file directly if it was Quicken 2005 through 2007. If older you need Quicken 2006 or 2007 PPC first to convert your data file; and this update must be done BEFORE you upgrade to Mavericks:
http://quicken.intuit.com/support/help/patching/quicken-2006-manual-updates--mac -/GEN82200.html
Filemaker Pro PPC (in this case 7) running in Snow Leopard Server installed into Parallels for use in Lion, Mt. Lion and Mavericks:
[click on image to enlarge]
Snow Leopard Server: 1.800.MYAPPLE (1.800.692.7753) - Apple Part Number: MC588Z/A (telephone orders only)
This solution allows you to run your Photoshop Elements in Mavericks concurrently with Filemaker Pro PPC. Mavericks is a free download.

LDAP and NFS mounts/setup OSX Lion iMac with Mac Mini Lion Server

Hello all,
I have a local account on my iMac (Lion), and I also have a Mac Mini (Lion Server) and I want to use LDAP and NFS to mount the /Users directory, but am having trouble.
We have a comination of Linux (Ubuntu), Windows 7 and Macs on this network using LDAP and NFS, except the windows computers.
We have created users in workgroup management on the server, and we have it working on a few Macs already, but I wasnt there to see that process.
Is there a way to keep my local account separate, and still have NFS access to /Users on the server and LDAP for authentification?
Thanks,
-Matt

It would make a great server. Bonus over Apple TV for example is that you have access via both wired ethernet and wireless. Plus if you load tools from XBMC, Firecore and others you have a significant media server. Cost is right too.
Many people are doing this - google mac mini media server or other for more info.
Total downside to any windows based system - dealing with constant anti-virus, major security hassels, lack of true media integration and PITA to update, etc.
You should be aware that Lion Server is not ready for prime time - it stil has significant issues if you are migrating from SNL 10.6.8. If you buy an apple fresh Lion Server mac mini you should have no problems.
You'll probably be pleased.

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Hello I have a problem with Mac Pro, iPhoto does not want to stay open and close as I can figure this out? thanks

Refer below link once
App doesn’t open | Progress wheel spins continually

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

After I updated lion to 10.7.4, app store does not recognize my ID APPLE and it unable to connect me to app store in order to update/download apps? What have I to do? I have the same problem with mac mini e mac book air. Please help me!

Your advice did not help me. I also installed 10.7.4 combo but the situation is the same.
my internet connection is ok, mail is ok, but app store after 3 resets does not recognize my ID and it says "connection is not possible". Why? I have the same problem in both my mac mini late 2009 and mac book air 2010? Is it a problem of 10.7.4 update? I have to solve this problem and how can i return to 10.7.3 if my last backup was not with 10.7.3???thank you for your kind collaboration...

AD account Login problem with MAC 10.6.8

Hi All,
We have around 50 odd MAC that are connected to windows server 2008 R2. the user were logining in to these MACs using their AD account. Recently few of the random MAC did not allow the user to login using their AD account.When analyzed though the MAC shows that it has connected to the Domain and the server is active with green button it has unbind itself from the server.I had to login in as local user bind the MAC back to get this resolved.
Now the same has started happeneing for most of the MAC that we have and every morning I have login as local Admin and unbind / bind the MAC with the server. this gets reset once the user reboots or shutsdown.
Have tried with few of the below solution but nothing helped:
Solution 1:
<key>mdns_timeout</key>
<integer>2</integer>
The integer value is in seconds; changing it to at least 5 should allow the Mac OS X client to reconnect to the Active Directory domain after a network interruption. In some configurations, a larger timeout value may be required.
You can change this value by using the sudo command and a text editor to edit the preference file directly. Or you can use the Terminal command below, making sure to enter it all on a single line:
sudo /usr/libexec/PlistBuddy -c 'Set :mdns_timeout 5' /System/Library/SystemConfiguration/IPMonitor.bundle/Contents/Info.plist
Solution 2:
I have seen all of the probable solutions and tried everything and still I am getting issues with 10.6.6 and after rebooting the Mac gets unbind. Or the Mac gets Network Accounts Available even when not accessing the list of users from AD. But the thing that I have done that has solved all my issues with AD on the Macs is to uncheck the box to search on all domains. For some reason I am seeing that when the Macs have this option checked, it searches through out the forest on the same domain controller more than once, so AD stops the handshaking of the authentication.
I hope this helps like it did on our Network, since then I have not seen the Macs lose the binding or slow SMB.
If you've tried this please let us know.
TIP: Uncheck Allow Authentication from any domain for Mac AD problems
Wednesday, April 20, 2011
Steven Wells sent a fix and an explanation of problems with Macs losing their binding to Active Diretory:
Unchecking "Allow authentication from any domain in the forest" is working at our college. We have been beating our heads on this for about 2 terms, with no understanding of why it works in some places and not in others. When we found this working, our IT guy said that the Security SID is being duplicated, when it looks in other domain forest, and that is what is causing the problem. This is the first time I have found an explanation for the problem.
If you've tried this approach please let us know.
Solution 3:
Solved it. Create a file in Textedit with the name 'auto_master' (no file extension) with the following contents:
# Automounter master map
+auto_master # Use directory service
/net -hosts -nobrowse,hidefromfinder,nosuid
/home auto_home -nobrowse,hidefromfinder
#/Network/Servers -fstab
/- -static
Place this in /etc/ folder
Hope this helps
solution 4:
TIP: a Kerberos fix for OS X 10.5 and 10.6 binding to Active directory
Friday, November 11, 2011
Mehdi Mafi forwarded a fix he found for problems with Leopard and Snow Leopard binding to Active Directory:
This was taken from Dane Riley's imaging building for DeployStudio.
With Mac OS X Leopard every Mac is now running a KDC (Kerberos Distribution Center). Basically each imaged machine is using the same security certificate and hash. Deploying a single image will deploy the same KDC to every system. This [Apple] article covers how to reset the local KDC so that each system is unique. Basically, do the following:
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
After deployment, perhaps using Apple Remote Desktop to all systems, re- establish the KDC by typing sudo /usr/libexec/configureLocalKDC
If you've tried this approach with Mac OS X 10.5, 10.6, or even Lion, please let us know. .
TIP: More on a kerberos fix for AD binding problems
Monday, November 14, 2011
Mehdi Mafi updated his Friday report about Mac OS X 10.6 problems binding to Active Directory:
You may want to add this. If the Mac keeps unbinding from AD (people can't log in to a Mac), here is how to fix it:
Unbind it from Domain
Launch Keychain Access
Search for com.apple.kerberos.kdc and delete all 3 items
Using Terminal type sudo rm -fr /var/db/krb5kdc
Re-establish the KDC by typing sudo /usr/libexec/configureLocalKDC
Bind it to domain again ( When you bind, uncheck allow authentication from any domain in the forest in: Directory Utilitiy-> Advanced Options\Administrative ) this fix the issue that sometimes it can' find AD under search space.
If you tried this please let us know.
Solution 5:
For Snow Leopard AD login issues, use upper case domain
Solution 6: for .local
To create this StartupItem, create the following directory as root:
/Library/StartupItems/FixADAuth
Then chown it to root:wheel and chmod it to 755. These must also be the owner/permissions on the two files it will contain, below:
Contents of our /Library/StartupItems/FixADAuth/FixADAuth:
#!/bin/bash
. /etc/rc.common
date > /var/log/FixADAuth.log
n=0
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local; n=$(($n+1))
done
echo Authentication successful: $AuthSuccess >> /var/log/FixADAuth.log echo Operation count: $n >> /var/log/FixADAuth.log
date >> /var/log/FixADAuth.log
Contents of our /Library/StartupItems/FixADAuth/StartupParameters.plist:
Description = "Fixes Active Directory authentication issue";
Uses = ("Disks");
Obviously you'll need to change "middlewich.local" to your own domain name (and the network interface name if your connection is wireless). The script checks to see if it can see the user "Administrator" on the domain, as he's a fairly common bloke, but if you've renamed yours for security reasons then pick another one. I've also included some logging functionality for debug purposes, so you can verify how well the script is working if you need to and time it in your environment before telling the users how long to wait. The /var/log/FixADAuth.log file will contain the date/time the process started, the success variable set to 1 (just to verify), how many DNS operations were required to fix the problem, and the date/time it ended. For us the time difference is normally about +30-40 seconds with around 120-180 operations taking place. Once you're happy with the script, you can strip it down to its bare functionality if you like, like so for us:
#!/bin/bash
. /etc/rc.common
AuthSuccess=0
while [ $AuthSuccess != 1 ]
do
id Administrator && AuthSuccess=1 || networksetup -setsearchdomains Ethernet "Empty"; networksetup -setsearchdomains Ethernet middlewich.local
done
I hope this helps someone!
Regards

You are welcome.
But the question is 10.6 mac just like 10.6.8 , as long as its the same and works.
Yes. You can save some updates by using the combo update.
10.6.8 Combo Updater

Can't see volumes with Mac os x server install

I'm having a problem installing MAC OS X Server on a RAIDed MAC PRO (3 drives @ RAID 5: Here are the steps that I have done so far with no luck: created a RAID level 5 with RAID utility from CLIENT OS install cd that came with mac pro. Created one giant volume with the entire contents of disk space on the RAID with the CLIENT OS install cd/RAID utility also. Rebooted, the MAC PRO, ejected the CLIENT OS cd, inserted MAC OS X server install CD. When I get to the screen where I choose my volume to install the OS on, I can't see any volumes. I was told by Apple and CDW (reseller) to go to disk utility and do an ERASE on the volumes, that should format the drive and should be seen by the OS X Server install. It didn't work. It's interesting that I can install the normal client OS after creating my RAID, Volumes, etc... But the OS X Server install DVD doesn't see the volumes during the install process, OR using disk utility from the OSX server install disk, but disk utility on the MAC OS X client CD sees it fine. Any help would be greatly appreciated.
Thanks,
Eric

Does Apple support their RAID card in Mac Pro using Server? or does Server need to be updated? Minimum requirements for Mac Pro RAID card is 10.4.10.
You could try the cheat method: install everything on a single drive and clone it and see if it works.
From a discussion yesterday or Monday, only Apple drivers are supported on the Mac Pro (firmware?) and not 3rd party retail drives (a bummer) so you've got nearly $2000.

Problems with Mac OS X Server and webperfcache...

Similar Messages

Maybe you are looking for