Problems with "Make this a descending axis"

Are there any known issues with that chart feature?
You can enable this option by right clicking on an axis label selecting "Data (X/Y) Axis Options" in the context menu.
I am using a horizontal line chart with a numeric x-Axis and a logarithmic y-Axis. When I check the option above, everything is fine except my axis is ordered the wrong way round.
When I uncheck the option nothing is painted correctly at all. The lines and markers are at completely wrong positions. When I scale down the chart, the curves themselves are painted correctly again but still with an incorrect offset.
Am I using a combination of features that shouldn't be combined? When I let the x-Axis have an ordinal scale, everything is fine as well. But my customer wants to have a numerical scale. So it seems like I have to tell him that Crystal Reports currently is not able to do what he wants.
Any help is greatly appreciated!
Regards,
Florian

Please re-post if this is still an issue or purchase a case and have a dedicated support engineer work with you directly:
http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300?resid=-Z5tUwoHAiwAAA8@NLgAAAAS&rests=1254701640551

Similar Messages

Problem with Make to Order sales order

Hi,
We are facing a problem with sales order which has Make to order item catagory, Rescheduling is not happening for the sales order of this type. However, we have taken up this issue with SAP and SAP has replied that MTO sales order are Excluded from rescheduling program. SAP has suggested us to use CO28 to reschedule the Production order so that the changes can effect the corrorsponding sales order.
We have observed that when sales order is created with MTO item category, production order is automatically created but when we see the Requirement list in MD04 for the material there is an Exception message as '20' (Cancel process). After the production order is confirmed and goods reciept has done the quantity confirmed against the sales order is becoming ZERO and hence we could not able to create delivery for the sales order.
We kindly request you to help us in this regard. This is creating a big problem for our business.
Thanks counting on your support.
Warm Regards,
Sridhar Burugula

Dear ,
Did you check any sales order reference in your production order assingment tab? Did you check the cost roll up in sales order level based on the BOM and Routung created for dt FG?
I believe the link between Sales Order and Production order lies in requirement Type and Requirement Class in define planning strategy .
Check in you make to order planning stratgey -SPRO-Define Planning Strategy -Make To Order .Here you should keep the correct Requirement type for customer(OVZH) and requirement class (OVZG).
Check and revert
Regards
JH

Problem with server this AM

the email server is not accepting logins (temporary lookup and ldap stuff)
i recently changed the store admin and top level admin passwords via the DA - but changed them back after noticing this, initially it wasn't a problem either - but this morning it was, i changed them both back rebooted, but to no avail -
please help!!!
# /opt/SUNWmsgsr/sbin/imsimta version
Sun Java(tm) System Messaging Server 6.2-8.04 (built Feb 28 2007)
libimta.so 6.2-8.04 (built 19:28:07, Feb 28 2007)
SunOS mail 5.9 Generic_118558-21 sun4u sparc SUNW,Ultra-60
dir 5.2 patch 4
here's some mail log and http
52 4.0.0 Temporary lookup failure: [email protected]
09-Oct-2007 09:50:53.51 tcp_local V 0 [email protected] rfc822; mailsrv particular ([88.18.145.63]) '' Error reading SMTP packet
09-Oct-2007 09:50:57.19 tcp_local J 0 [email protected] rfc822; [email protected] mailsrv mail5.urbannutritionmail.com ([69.56.59.101]) '' 452 4.0.0 Temporary lookup failure: [email protected]
09-Oct-2007 09:51:03.57 tcp_local J 0 [email protected] rfc822; [email protected] mailsrv episode6.dotnetxpert.com ([61.82.129.126]) '' 452 4.0.0 Temporary lookup failure: [email protected]
09-Oct-2007 09:51:07.16 tcp_local J 0 [email protected] rfc822; [email protected] mailsrv HOST025.eNetBestChoice.com ([64.62.212.25]) '' 452 4.0.0 Temporary lookup failure: [email protected]
[09/Oct/2007:09:33:03 -0400] mail httpd[28212]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) shutting down
[09/Oct/2007:09:33:04 -0400] mail httpd[28212]: Account Notice: close [200.1.1.116:1078] [unauthenticated] 2007/10/9 9:30:42 0:02:22 999 2213 0
[09/Oct/2007:09:35:48 -0400] mail httpd[1161]: General Warning: mscertd_initialize: configuration has SMIME disabled
[09/Oct/2007:09:35:50 -0400] mail httpd[1161]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) starting up
[09/Oct/2007:09:41:05 -0400] mail httpd[1161]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) shutting down
[09/Oct/2007:09:41:14 -0400] mail httpd[1872]: General Warning: mscertd_initialize: configuration has SMIME disabled
[09/Oct/2007:09:41:15 -0400] mail httpd[1872]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) starting up
[09/Oct/2007:09:41:51 -0400] mail httpd[1872]: General Error: ldappool: new connection failed: Invalid credentials (Error 0)
[09/Oct/2007:09:41:51 -0400] mail httpd[1872]: Account Warning: [200.1.1.116:1146] ldap search failed for (null) under uid=admin, ou=People, o=ourdomain.com,o=isp: Invalid credentials
[09/Oct/2007:09:41:51 -0400] mail httpd[1872]: Account Warning: Identity server SSO external auth failed for [200.1.1.116:1146] uid=admin, ou=People, o=ourdomain.com,o=isp: generic failure
[09/Oct/2007:09:41:51 -0400] mail httpd[1872]: General Error: ldappool: new connection failed: Invalid credentials (Error 0)
[09/Oct/2007:09:41:57 -0400] mail httpd[1872]: General Error: ldappool: new connection failed: Invalid credentials (Error 0)
[09/Oct/2007:09:41:57 -0400] mail httpd[1872]: General Error: ldappool: new connection failed: Invalid credentials (Error 0)
[09/Oct/2007:09:41:57 -0400] mail httpd[1872]: Account Error: [200.1.1.116:1146] Cannot get namespace for domain ourdomain.com: invalid credentials
[09/Oct/2007:09:41:57 -0400] mail httpd[1872]: Account Notice: [200.1.1.116:1146] domain not found
[09/Oct/2007:09:41:57 -0400] mail httpd[1872]: Account Notice: badlogin: [200.1.1.116:1146] plaintext user1 : generic failure
[09/Oct/2007:09:41:59 -0400] mail httpd[1872]: Account Notice: close [200.1.1.116:1146] [unauthenticated] 2007/10/9 9:41:50 0:00:09 1769 2585 0
[09/Oct/2007:09:41:59 -0400] mail httpd[1872]: General Error: ldappool: new connection failed: Invalid credentials (Error 0)
[09/Oct/2007:09:42:58 -0400] mail httpd[1872]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) shutting down
[09/Oct/2007:09:42:58 -0400] mail httpd[1872]: Account Notice: close [200.1.1.116:1147] [unauthenticated] 2007/10/9 9:41:59 0:00:59 962 2213 0
[09/Oct/2007:09:45:35 -0400] mail httpd[1131]: General Warning: mscertd_initialize: configuration has SMIME disabled
[09/Oct/2007:09:45:37 -0400] mail httpd[1131]: General Warning: Sun Java(tm) System Messaging Server mshttpd 6.2-8.04 (built Feb 28 2007) starting up
#

amconsole is apparently not the tool to use to change admin passwords...
i changed them back (they appeared as somewhat obfuscated strings from what amconsole did
./configutil -o local.enduseradmincred -v <my admin pass>
./configutil -o local.service.pab.ldappasswd -v <my admin pass>
./configutil -o local.ugldapbindcred -v <my admin pass>
and it's fixed.
- i did have an @ character in the passwd when i changed it initially with amconsole - could this have been an issue?
thanks,
s7

Problem with make in cpan and OS 10.5.6

Hi, my Perl installation of DBD::mysql was just broken by installing 10.5.5 and then 10.5.6 over 10.4.11. No problem, I thought, just install the new one from cpan and I'm on my way. Not so fast, is what cpan says. Or, to be more specific, this is what cpan says:
"Writing Makefile for DBD::mysql
make: * No rule to make target `/System/Library/Perl/5.8.8/darwin-thread-multi-2level/CORE/config.h', needed by `Makefile'. Stop.
/usr/bin/make -- NOT OK
Running make test
Can't test without successful make
Running make install
make had returned bad status, install seems impossible"
Same if I try to reinstall DBI. Any ideas? Is make broken (well, forget that question...;-)?

ok, I just installed XCode Tools from the 10.5.5 installer DVD, that took care of the make problem. DBI and DBD::mysql installed without a hitch and all my programs are up & running. Apache2 rocks, it's all like lightyears faster than the WebServer on my PowerBook 12". I'm starting to like this... Well, maybe it also had to do with the PB being slower and all, but I doubt it.
Do I get a cookie/star now, for having answered my own question? :-D

Problem with Dynamic Configuration in SOAP-AXIS adapter..!!!

Hi ,
Idoc> XI>SOAP-AXIS
I am doing a scenario where I need to pass the URL dynamically in SOAP-AXIS adapter by taking the SNDPRN of Idoc.
If SNDPRN = 100 , message has to go to http://10.190.25.16:8210/file/receiver
   SNDPRN = 200 , message has to go to http://20.180.26.16:8210/file/receiver
It is working correctly when I tried for single receiver. When I' tried to use DynamicConfiguration, it is coming in SOAP document but it is not working and not passing to correct channel. According to this note 1039369, I mentioned the following modules.
AF_Adapters/axis/AFAdapterBean --->                 afreq
AF_Adapters/axis/HandlerBean      --->                  xireq
AF_Adapters/axis/HandlerBean      --->                  dc
AF_Adapters/axis/HandlerBean       --->                 remover
AF_Adapters/axis/HandlerBean       --->                 trp
AF_Adapters/axis/HandlerBean        --->                xires
AF_Adapters/axis/AFAdapterBean    --->               afres
xireq -> handler.type-> java:com.sap.aii.axis.xi.XI30OutboundHandler
dc    -> handler.type-> javasap.aii.axis.xi.XI30DynamicConfigurationHandler
dc   --->   key.1 --->      write http://sap.com/xi/XI/System/SOAP TServerLocation
dc    --->          location.1 --->         context
dc     --->         value.1      --->        transport.url
remover    ---> handler.type    --->   java:com.sap.aii.axis.soap.HeaderRemovalHandler
remover     ---> namespace    --->      http://sap.com/xi/XI/Message/30
trp         --->     handler.type   --->    java:com.sap.aii.adapter.axis.ra.transport.http.HTTPSender
trp           ---> module.pivot --->     true
xires     --->    handler.type   --->    java:com.sap.aii.axis.xi.XI30OutboundHandler
and I am getting the below error in SOAP-AXIS channel
Error Axis:    error in invocation: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error MP:     Exception caught with cause java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error           Exception caught by adapter framework: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Error Delivery of the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Kindly let me know if anyone has any idea what might be wrong?
Thanks
Deepthi

I have a similar problem. I also like to add some header fields to my message und that's way I'm trying to use the AXIS adapter. (Axis adapter FAQ question 30) Unfortunately I'm getting exactly the same error message:
com.sap.engine.interfaces.messaging.api.exception.MessagingException: java.lang.IllegalArgumentException: object type invalid: class com.sap.aii.adapter.xi.ms.XIMessage
Deepthi, you wrote that you have missed one jar file. Can you remember which file it was?

Type Mapping Problem with java.util.Vector in Axis

Hi,buddies,I want to use the Vector class as the return type of my service, but it seems that there isn't a built-in Ser/Deser factory for Vector, is it?So i think we need to provide our own Ser/Derser. and this is a very common problem,and i wonder how to write my own Ser/Derser, please give me some suggestion,thx!
Best Regards:)

Hi,I checked out the src of Axis 1.2, I found there is a org.apache.axis.encoding.ser.VectorSerializerFactory class and an according org.apache.axis.encoding.ser.VectorDeserializerFactory class.so in the deploy.wsdd i use them as the ser/deser factories in the TypeMapping part inside the service tag.everything goes well and i got no problem deploying the service to axis.But the problem is that when i try to invoke the service and get a vector as return(Suppose the components in the vector is instances of Movie class), the following error occured:
org.xml.sax.SAXException: No deserializer for {urn:movies}Movie
But it is a little bit confusing,for I declared the ser/deser factories for the bean class Movie(with built-in ser/deser factories of axis),and everything was going fine when i deployed the service to axis.So should i still use the TypeMappingRegistry or there are something i just missed.Please give me some suggestion,thx :)
Best Regards:)

Problems with make/gcc on Solaris

I'm working on building a binary on several different platforms, but the only one giving me trouble is Solaris 10 (64-bit -- though apparently this is building a 32-bit binary). The binary relies on the following project:
https://projects.coin-or.org/Cbc
I can checkout their code from SVN and build it without a problem. However, we then have a small cpp file that links to those libraries. I cannot get this cpp file to build. In fact, Solaris chokes on the makefile itself complaining that one of the lines ends with the '$' (which it does). The strange thing is, this makefile works correctly on Linux. It also works just fine on Windows in the MinGW environment (I do have to add a few flags on Windows but they are completely unrelated and the line ending with '$' still still present and works).
Since the makefile failed, I tried to run the 2 commands that it does manually. The first one succeeds but the second command fails to locate the dynamic libraries -- even though the directory they reside in is specified in the -L argument. What gives??
I put /usr/ccs/bin and /usr/sfw/bin in my PATH variable so that I can use make and gcc. I had to add /usr/sfw/lib to the LIBDIR variable, otherwise I was getting even more errors. Here is the makefile and the error that I get when I try to run make:
-bash-3.2$ cat makefile
CPP = gcc
COINPATH = /export/home/locuser/cbc_source/coin-cbc
CPATH += -I$(COINPATH)/include/coin
LIBDIR = -L$(COINPATH)/lib:/usr/sfw/lib
COINLIBS = -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
CFLAGS += -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g $(CPATH)
DATASTORE=$(PSASRC)/datastore.a
.c.o:
$(CC) $(CFLAGS) -c -o $@ $<
.cpp.o:
$(CPP) $(CFLAGS) -c -o $@ $<
OBJSx = cbc.o
cbc: $(OBJSx) $
$(CPP) $(CFLAGS) -o cbc $+ $(LIBDIR) $(COINLIBS)
-bash-3.2$ make
mksh: Fatal error in reader: '$' at end of line
Current working directory /export/home/locuser/cbc_source/solver
Then this is what happened when I tried to run the 2 commands manually:
-bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -c -o cbc.o cbc.cpp
-bash-3.2$ gcc -DUSE_SNAPSHOT=1 -DNEW_SIMULATOR=1 -g -I/export/home/locuser/cbc_source/coin-cbc/include/coin -o cbc cbc.o -L/export/home/locuser/cbc_source/coin-cbc/lib:/usr/sfw/lib -lCbcSolver -lCbc -lCgl -lOsiClp -lClp -lOsi -lCoinUtils -lm
ld: fatal: library -lCbcSolver: not found
ld: fatal: library -lCbc: not found
ld: fatal: library -lCgl: not found
ld: fatal: library -lOsiClp: not found
ld: fatal: library -lClp: not found
ld: fatal: library -lOsi: not found
ld: fatal: library -lCoinUtils: not found
ld: fatal: file processing errors. No output written to cbc
collect2: ld returned 1 exit status
However, if I cd into the directory /export/home/locuser/cbc_source/coin-cbc/lib then the libraries do indeed exist there:
-bash-3.2$ cd /export/home/locuser/cbc_source/coin-cbc/lib
-bash-3.2$ ls lib*.so.0
libCbc.so.0 libClp.so.0 libOsiCbc.so.0
libCbcSolver.so.0 libCoinUtils.so.0 libOsiClp.so.0
libCgl.so.0 libOsi.so.0 libOsiCommonTests.so.0
Any ideas on what I am doing wrong here? It seems like there is something non-standard about make on Solaris?

Woo hoo! I was able to finally get past this. Thank you both for you assistance. I tried the LD_DEBUG=files option and it didn't seem to help me much. I got some additional output but it appeared unrelated. So then I separated out my -L argument into 2 separate arguments. This changed the error messages and led to some errors about operator new and delete not being found as well as some gz and BZ2 functions not being found:
Undefined first referenced
symbol in file
operator new[](unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
operator new(unsigned int) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_string<char, std::char_traits<char>, std::allocator<char> >::operator[](unsigned int) constcbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_ostream<char, std::char_traits<char> >::operator<<(std::basic_ostream<char, std::char_traits<char> >& (*)(std::basic_ostream<char, std::char_traits<char> >&))cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
vtable for __cxxabiv1::__si_class_type_infocbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
std::basic_ostream<char, std::char_traits<char> >::operator<<(int)cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
BZ2_bzRead /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
operator delete[](void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
operator delete(void*) cbc.o (symbol belongs to implicit dependency /usr/sfw/lib/libstdc++.so.6)
gzopen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
gzread /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
BZ2_bzReadOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
BZ2_bzWriteOpen /export/home/locuser/cbc_source/coin-cbc/lib/libCoinUtils.so
This led me to two conclusions:
1. I needed to change the makefile to use g++ instead of gcc (due to the messages about the operators existing in libstd*c++*.so.6).
2. I needed to include the libz and libbz2 libraries (by adding -lz and -lbz2) to COINLIBS.
I made those 2 changes to the makefile and it built successfully with gmake! So now I'm off to go document this information on our wiki. Thanks for the suggestions -- they pointed me in the right direction and ultimately helped me resolve this issue. :)

Problem with Font Embed for vertical axis title

Dear Friends,
I have embedded a truetype arial font to rotate the vertical axis title, It works fine in xcelsius design mode(canvas) , but when i click preview button i coudln't see the vertical axis title.
Should i change any font settings in xcelsius? or Should i have licence to my fonts? Please help me to fix this issue.
Thanks in advance,
Manimaran.

cannot be rendered...that's odd. But becoming unrendered is standard. When you render the text on top of the video it makes one renderd file out of the two layers, If you change one of the layers, then the rendered file is no longer current and it has to make a newly rendered file with the current settings (in this case the altered text.) It's no different than if you were to change a setting on a filter, even one tiny notch, or change the duration of a transition. If you want to limit the amount of the render, cut the bottom clip at the beginning of the text clip and the end and it will only need to re-render the area overlapped by the text.

Problem with Make (C language) command on Aquamacs

Hello i'm french.. so sorry for my English
i'm trying to do some basics programs on C langage on Aquamacs.
but the "make" command does not works with me.
my module is like this
#include <stdlib.h>
#include <stdio.h>
#include "arithmetique.h"
int max(int a, int b)
if (a>b)
    return a;
return b;
int puissanceDe2(int n)
int p2 = 1;
for (int i=0; i<n; i++)
    p2*=2;
return p2;
int resteTq(int    a,int b)
while(a>=b)
      a-=b;
return a;
int resteFor(int a, int    b)
for(;a>=b;a-=b)
return a;
int resteRj(int    a,int b)
if(a<b)
    return a;
do
    a-=b;
while(a>b);
return a;
int pgcdRec(int a,int b)
if(a==b)
    return a;
if(a<b)
    return pgcdRec(b-a,a);
return pgcdRec(a-b,b);
int pgcdIter(int a,int b)
while(a!=b)
      if(a<b)
    b-=a;
      a-=b;
return a;
my makefile like this:
# Makefile
arithmetique: arithmetique.o testArithmetique.o
    gcc arithmetique.o testArithmetique.o −o arithmetique
arithmetique.o: arithmetique.c arithmetique.h
    gcc −std=c99 −g −Wall −Werror -c arithmetique.c
testArithmetique.o: testArithmetique.c arithmetique.h
    gcc −std=c99 −g −Wall −Werror -c testArithmetique.c
and my compilation error like this:
make
gcc −c −std=c99 −g −Wall −Werror arithmetique.c
i686-apple-darwin11-llvm-gcc-4.2: −c: No such file or directory
i686-apple-darwin11-llvm-gcc-4.2: −std=c99: No such file or directory
i686-apple-darwin11-llvm-gcc-4.2: −g: No such file or directory
i686-apple-darwin11-llvm-gcc-4.2: −Wall: No such file or directory
i686-apple-darwin11-llvm-gcc-4.2: −Werror: No such file or directory
arithmetique.c: In function 'puissanceDe2':
arithmetique.c:17: error: 'for' loop initial declaration used outside C99 mode
make: *** [arithmetique.o] Error 1
Compilation exited abnormally with code 2 at Wed Nov 28 21:26:29
i'm at university and thoses files works on Ubuntu but not on my Mac.. someone can tell me why?
xCode is installed already. Direct commands with gcc works.

Oh thanks !
i have complete your makefile with my good files and it works !
# Makefile
CFLAGS=-std=c99 -g -Wall -Werror
CC=gcc
arithmetique: arithmetique.o testArithmetique.o
    $(CC) -o arithmetique arithmetique.o testArithmetique.o
arithmetique.o: arithmetique.c arithmetique.h
    $(CC) $(CFLAGS) -c arithmetique.c
testAr.o: testArithmetique.c arithmetique.h
    $(CC) $(CFLAGS) -c testArithmetique.c
thanks for your answer.

AirDrop. Has anyone had a problem with getting this program to run consistently?

I have had numerous case openings with this product. I love it when it works, but for some reason, my mac and mac book pro can no longer see each other when the application is opened. Both are running the current 10.8.2 upgrade and both are between 2-3 years old and air drop is supported on both. No one has been able to figure this out! I've gotten to the point where I absolutely need this program because of its simplicity and speed in transferring big files like adobe illustrator files for example. Please help!!

Review your hardware again from Apple's AirDrop criteria here.
Supporting information on AirDrop usability and workflow. It uses Wi-Fi. Do you have Wi-Fi interference when it isn't working the way you expect?
If you would like to enable AirDrop for wired and wireless, here is an article that shows how to do that from the command line in Terminal. This side-steps any issue where the machine has wireless deemed to old for AirDrop support.
And here is a Bash script that I wrote to implement the above wired/wireless AirDrop solution. Copy and paste this into a text editor. Save it as airdrop.sh. Make it executable, and run it as: ./airdrop.sh ON
#! /bin/bash
# airdrop.sh - turn on or off the AirDrop feature in OS X.
# airdrop.sh ON or airdrop.sh OFF
case "$1" in
    ON)
    /usr/bin/defaults write com.apple.NetworkBrowser BrowseAllInterfaces 1
    echo "AirDrop facility enabled"
    killall Finder
    OFF)
    /usr/bin/defaults write com.apple.NetworkBrowser BrowseAllInterfaces 0
    echo "AirDrop facility disabled"
    killall Finder
    echo "Usage: $0 {ON|OFF}"
    exit 1
esac
exit 0

Problem with Make file

I am working on recently upgraded Solaris 9 and I am using a make file to build an application using make �f brc.bld
It is giving the error : make: Fatal error in reader: brc.bld, line 9: Unexpected end of line seen
for the line in this build file : %Echo Begining execution of $(_script)
I am using cc for the make file ( cc: Forte Developer 7 C 5.4 ) and the make command
Any help in this regard is appreciated.
Regards,
Vivek

Hi,
I am not able to find error message related to brc.bld. If a test case could be provided, that will be helpful.
Or please try our most recent version Sun Studio 10(Trial Downloads http://www.sun.com/download/products.xml?id=41e70b09) to see whether that fixes the problem.
Thanks.
Rose

Problem with make.rules

Hi, thanks in advance
I've installed Forte C 6 and i created a project , i've opened
a file and when i've tried to build it i've found the next message:
dmake: warning : can't find file make.rules ...: no such file or directory ...
Should i create this file ?, if I should create it , what i should
put into ?
Thanks

Hi, thanks in advance
I've installed Forte C 6 and i created a project ,
i've opened
a file and when i've tried to build it i've found the
next message:
dmake: warning : can't find file make.rules ...: no
such file or directory ...
Hello i've already resolved this problem , i've found a file called
make.rules and put into /usr/share/lib/make and i've modified some
rules were exits into this file , and all run ok .
Thanks

Problem with `make`

For some reason make has never worked. I've tried installing UnrealIRCd, eggdrop, and now tor, but every single time when I get to make it says "command not found". The Makefile's are there, too.
Also, in case this helps, gcc is: gcc (GCC) 4.2.2

Install the group base-devel for make and other devel type tools.

Problem with make/libtool

When running make for a C++ project generated by kdevelop it will spawn tons of "sed s%^.*/%%" and "sh" processes and makes the pc unusable.
This happens when trying to build it from kdevelop or running make myself from the terminal.
[envil@insurgency socketclass]$ make
make all-recursive
make[1]: Entering directory `/home/envil/socketclass'
Making all in src
make[2]: Entering directory `/home/envil/socketclass/src'
/bin/sh ../libtool --tag=CXX --mode=link g++ -g -O2 -o socketclass socketclass.o
At this point it starts spawning sed/sh over and over.
using make version 3.81-3 and libtool-2.2.6a-1

Dear ,
Did you check any sales order reference in your production order assingment tab? Did you check the cost roll up in sales order level based on the BOM and Routung created for dt FG?
I believe the link between Sales Order and Production order lies in requirement Type and Requirement Class in define planning strategy .
Check in you make to order planning stratgey -SPRO-Define Planning Strategy -Make To Order .Here you should keep the correct Requirement type for customer(OVZH) and requirement class (OVZG).
Check and revert
Regards
JH

Problem with make order from lenovo shop

Hello,
Today i try to purchase "X1 Carbon" from my cart of Lenovo shop, but on last step "Review&Order" after push button "Place order" i receive error message like about "Unable to authorize your transaction..." and stay on the same web page, but money was transfer from my credit card to "US/MORRISVILLE/LENOVO GROUP". On my account i don't see this order - order list is empty.
What i need to do ?

Correct to all your statements. The crop is just an adjustment, so if you crop an image it will remain that way unless you change the crop or delete the adjustment.
What I do is create versions for the different aspect ratios and create a folder (say called Print) with smart albums under it that collect the different aspect ratios. You can filter for aspect ratio, its under the Aperture Metadata field in the filter. The aspect ratio is expressed as two numbers separated by a colon : so a crop of 4 x 5 would be filtered by using 4:5 in the filter.
good luck
Message was edited by: Frank Caggiano Right, crop is one of thse things that needs to be oe on a per image basis. As you said each image will have the crop applied to a different part of the image.
Actually crop can be stamped from one image to another(s). Of course once you've got the other images cropped to the aspect ratio you will probably want to move the crop box around as each image is of course different

Problems with "Make this a descending axis"

Similar Messages

Maybe you are looking for