Problems with map in LR5. Some images keep "locking" and all metadata apears as mixed .

Hello
I have recently started using Lightroom 5 and I try to place all of my photos in the map module. It worked perfectly fine for a month.
1. The first problem is that the first two pictures in every folder are constantly "selected", So when I double click on the map to unselect all images, the thumbnails row at the bottom keep jumping to the start.
2. The second problem is that sometimes the coordinations data (GPS) apears as <mixed>, altough I have selected only one picture. Sometimes I would stack a bunch of pictures on the same spot, and some of them individualy will apear as <mixed>, while others will show the correct details.
3. The exact same problem happens with the Caption information. In pictures that have the GPS data <mixed>, will have the Caption data <mixed> as well. I am assuming this will be the case with every type of information I insert.
Thank you very much for helping me, this frustrates me a lot!

Dave
It may have to do with the settings in Mail.
When running Mail, go to preferences -> Accounts -> Mailbox Behaviors.
You should now have the list of your email accounts to the left and to the right a list showing Drafts, Notes, Sent, Junk and Trash.
If you do not need or want anything to be stored on your ISPs/mail account server, make sure the choices for "Store ..... messages on the server" are not checked. This option relates to Sent, Junk and Trash.
If checked, uncheck them and you should then see the extra folders disappear from Mail. But be aware - by choosing not to store any messages on the server, your only backup will be on your computer.
Hope this is of any help.
All the best,
Espen

Similar Messages

Problem with maps on e72

Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.

I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.

Why do I get Colored bands on some images in LR4 and LR5, but not in Aperture?

On some images -- both RAW and JPG -- when opened in LR4 or LR5, there will be one or two "curved" color abberation lines across the entire image. This doesn't occur when I open the images in Aperture. Any idea why? Thanks

>Is it possible that Aperture is showing you the camera-embedded JPG by default? What happens if you actually produce a JPG from the raw file in Aperture?
Aperture works the same way as Lightroom in this respect. It will first show you the embedded jpeg and will render a new conversion from the raw data as soon as it can. So it is possible the OP saw the embedded jpeg, but that should not last long and certainly by now should have been replaced with a newly rendered preview. Either Aperture is more forgiving of a small defect in the raw file or Lightroom import is somehow getting corrupt files of the sd card and Aperture not (would be weird). Another option is that the camera raw cache is corrupt. This can be checked by emptying the cache (Preferences->File Handling->Purge Cache). Lastly, this might be a corrupt preview in Lightroom. Check this by zooming 1:1 on an offending area in the Develop module and seeing if it goes away.
>I suspect that the curvature is in fact due to lens corrections, and that these lens corrections are always on
I believe you are right. I remember vaguely that there is some default lens correction with some cameras like this that is independent of the lens correction module. No clue whether the LX7 is one.

Problem with mapping the Entity beans onto database tables

Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!

You need to add the pbclient.jar or some similar name like that, in the CalssPath.

Problems with my Acrobat IX reading images

I have just started having problems with my Acrobat IX reading images. I have now noticed that when I open up a PDF, the images are now blacked out with a black box. These are all documents that I have been able to read just fine in the past. I have done some research online and have found others who are having the same problem but I cannot find a solution. Some solutions I have found are to make sure on the printer settings that it reads large images which I have done and that it prints in color which I have also done. When I print out the document, it prints just fine, I just cannot read it on the screen.
Please any help would be greatly appreciated.

Thank you so much for taking the time to respond but nope. unfortunately I have tried that a few times, both clicking and unclicking the view large images with no luck. Since I have Acrobat IX Adobe wont help me. Any other suggestions? Should I just uninstall and reinstall this program?? When I Google this problem it appears that a lot of people are having this problem.

Problem with Map Loader 3.0.28.0 and 5800XM

Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!

Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world!

Problem with maps in Mavericks on iMac

I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.

Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works!

Problems with mapping after bundling messages into one XML-file

Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo Pijlman

Hi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha.

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared

I have a problem with my white macbook, this message keeps popping up when I start the laptop " no matching processes belonging to you were found " even though I didn't mess up with the system or even use terminal. It just appeared without Doing anything!!
And now I can't use the " tap an click " from my tack-board and no nothing was spilled on my mac.
Please help

Check your login items in the Users & Groups preference pane. Remove any that you don't recognize.

Problem with Adobe Flash Player website warning keeps appearing? -Solution is simple: uninstall it!

Problem with Adobe Flash Player website warning keeps appearing? -Solution is simple: uninstall Adobe Flash Player! (-Who needs it anyway?)

So, you didn't need help with anything, you just wanted to rant?

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?

I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank u

Clear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies"

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi! I have a problem with the adjustment brush some are not there anymore like soften skin, how i can fix that?

Hi dear,
it's funny, real funny.
I think the programmes have diffrent sound system from the normal calls system.
All you need to do is to turn the sound up from the bottom in the phone side in the time you're making or recieving the call.
you'll hear the sound.
I hope that would help.
All the best

Problem with Edit IN function between LR 2.3 and PS CS3

I recently upgraded my system to a Windows Vista 64 bit Core 2 Quad with 8 GB. Lightroom now works and loads images the way it should. I do have one major concern and need any help possible.
I am using LR 2.3 in 64 bit and PS CS3 ver 10.0.1 (which is 32 bit - loads slowly but otherwise works fine). The problem I am encountering is in LR Develop / Photo / Edit In... - using any of the menu items:
"Edit in Abode Photoshop CS3"
"Open as Smart Object In Photoshop"
"Merge to Panorama in Photoshop"
"Merge to HDR in Photoshop"
"Open as layers in Photoshop"
Photoshop opens but no image(s) are exported and I receive the message in LR - "The file could not be edited because Adobe Photoshop CS3 could not be launched."
Photoshop, however, was launched but no image exported and so I can't work on the image in PS. The appropriate TIFF image is created in LR for the first two menu items - nothing for the last three menu items.
I can create a partial work around by setting PS as an external editor, however, I can't use 4 of 5 of the menu items.
All the menu items work fine in Windows XPpro.
Any help is much appreciated.
PS I also tried the most recent Window 7 RC with exactly the same results.
Thanks
Bob

Don
I wasn't shouting - I just cut and paste the exact text and font in its original size and type as was shown in the message. Never had a thought that someone would be offended by cutting and pasting exactly what was in a message - it would appear that John Williams saw it for what it was.
However, sorry if I offended you.
Bob
Date: Mon, 1 Jun 2009 19:15:15 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Edit IN function between LR 2.3 and PS CS3
There is no reason to shout. There are only other users here trying to help.
>

I have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

i have a problem with my mac i have too many archives and programs and i want to delete all files and start at the begin my mac with out do format

I do not recommend reformatting your harddrive and reloading your software. This is a Windows thing. On an older mac it may be difficult to find all your software again.
Best to have greater than 2gig of free space. Many posters to these forums state that you need much more free space: 5 gig to 10 gig or 10 percent of you hd size.
(0)
Be careful when deleting files. A lot of people have trashed their system when deleting things. Place things in trash. Reboot & run your applications. Empty trash.
Go after large files that you have created & know what they are. Do not delete small files that are in a folder you do not know what the folder is for. Anything that is less than a megabyte is a small file these days.
(1)
Run
OmniDiskSweeper
"The simple, fast way to save disk space"
OmniDiskSweeper is now free!
http://www.omnigroup.com/applications/omnidisksweeper/download/
This will give you a list of files and folders sorted by size. Go after things you know that are big.
(2)
These pages have some hints on freeing up space:
http://thexlab.com/faqs/freeingspace.html
http://www.macmaps.com/diskfull.html
(3)
Buy an external firewire harddrive.
For a PPC computer, I recommend a firewire drive.
Has everything interface:
FireWire 800/400 + USB2, + eSATA 'Quad Interface'
save a little money interface:
FireWire 400 + USB 2.0
This web page lists both external harddrive types. You may need to scroll to the right to see both.
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
(4)
Buy a flash card.

Problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme

Hello everyone.
Please Help.
Again problems with Apex4.2, SkillBuilders Modal Page plugin, IE9 and HTML5 theme (Blue Respensive).
1. The problem is that all the popup windows display 100% of the width
2. After opens a popup window change the width of the parent window forms.
This happens only in IE9 browser.
In other browsers, the popup window only much larger than the form that is opened.
I can not change the size of the window.
Thanks.

Milk,
I changed the component level settings to use a fixed height and width (I adjusted edit, you still need to adjust create). You can try adjusting this some because the modal page should adjust a bit.
Then I added this CSS to the Inline CSS of the modal page:
section.uMessageRegion{position: static; !important;}
Let me know how this works for you.
Regards,
Dan
blog: http://DanielMcghan.us/
work: http://SkillBuilders.com/APEX/

Problems with map in LR5. Some images keep "locking" and all metadata apears as mixed .

Similar Messages

Maybe you are looking for