Problems with Mapping Input Parameter
Hi everybody,
just another question. I have a Mapping with an Mapping Input Parameter. If i provide a Parameter with an prefixed 0 e.g.: 01234 the output of this is 1234.
How can i manage this that the output of the Input Parameter ist 01234 and not like now 1234?
Many thanks in advance.
Greetings
The Mapping Input Parameter is of type varchar2 and it still gives 1234. The Problem is i have to provide the whole input parameter for logging proposes. I managed this now by building a workflow an provide the mapping input parameters to new variables. Now the Input 01234 gives 01234....:-)
Does anybody know another solution for this problem?
Greetings
Similar Messages
-
Problem with the input parameter in BIP
Hello Frenz,
I'm giving a date parameter as input.for ex date_from
I'm defining another parameter day
and in the lov of day I give
select distinct day from table where trunc(tran_Date)=:date_from
It's generating error saying date parameter cant be null
how to tackle this..
Thanks in advancehi
can u mail me the screen shots.
Regards,
Vinoth. -
About mapping-input-parameter operator !
hi all:
There is a problem,
I deploy a mapping,the mapping have a mapping input parameter, the mapping is runing a time every day£¬and
every day's parameter is different.
I want to mapping input parameter of the mapping can auto get a value from some soure now.
and the input parameter of the mapping is a "group by"
condition at mapping!
is this possible succed?Depending on what the (dynamic) source of you parameter value look like, you can either add it as a Mapping Table operator or create a simple function to use as a Pre-Mapping Process.
Nikolai Rochik -
Mapping Input Parameter renders mapping unable to be compiled or deployed
Hi there. I have an interesting issue I have not encountered before.
I can create a new mapping with a Mapping Input Parameter (just one parameter of type Integer), map this to a table column of the same type and the mapping compiles and deploys without any issues.
However, if I take an existing mapping (which already compiles and deploys without issues), add a Mapping Input Parameter to it (just one parameter of type Integer) and map this parameter through to a table column of the same type, when I compile the mapping I get a pop-up "Warehouse Builder Error" with a number 56 and a red cross. The mapping cannot generate any code and gives no explaination. Trying this on a different mapping causes the same issue but with a different number in the pop-up.
I have tried changing the parameter from integer to another data type and this makes no difference.
Removing the Mapping Input Parameter makes the mapping compilable and deployable again.
Am I missing something here ?
Thanks
PaulOk... this could be a bug, but I worked out how to resolve the issue.
To get the issue:-
1. Open a mapping which does not have a Mapping Input Parameter and compiles and deploys happily
2. Add a Mapping Input Parameter object, add an output attribute to it and map it to a table column.
3. Compile the mapping and you get a "Warehouse Builder Error" pop-up with a number, then a Validation Completed Successfully message. But no code can be generated and the mapping
cannot be deployed.
4. Slap your forehead and say "Doh!"
To fix the issue :-
1. Open the same mapping
2. Resynch the tables you mapped the Mapping Input Parameter to. The mapping now compiles and deploys ok.
3. Pat yourself on the back
cheers
Paul -
Problems with mapping after bundling messages into one XML-file
Hi all,
Case 1: one DebMas IDoc ==> XI ==> one XML-file : no problems with mapping.
Case 2: several DebMas IDoc's ==> XI ==> one XML-file : problems with mapping.
Explanation:
Incoming DebMas IDoc's:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 3 : Customer Master Partner Functions (E1KNVPM).
Businesspartner 4 : Customer Master Partner Functions (E1KNVPM).
After bundling into one XML-file:
Businesspartner 1 : no Customer Master Partner Functions (E1KNVPM).
Businesspartner 2 : no Customer Master Partner Functions (E1KNVPM) !!!!
Businesspartner 3 : Customer Master Partner Functions of Bp 2 (E1KNVPM) !!!!.
Businesspartner 4 : Customer Master Partner Functions of Bp 3 (E1KNVPM) !!!!.
All the payloads of the IDoc's are correct.
In the message mapping we use a Container for the Partner Functions (shown as below)
Is this a serious bug in the mapping of SAP XI ?
Does anyone knows how to solve this serious problem.
E1KNVVM -
> Partner_Container
E1KNVPM -
> Partner
PARVW -
> ParnerRole
KUNN2 -
> PartnerNumber
Regards,
Theo PijlmanHi,
Example:
Input idoc has field F1 with occurence 0..unbnd
My input values for field F1 is
1
none
2
3
Say, I have a mapping, F1---->TargetF1
In the target only 3 TargetF1s will be created for the values 1,2,3 and nothing will be created for the field F1 with no value.
To overcome this, use collapse contexts.
F1->collapsecontexts>TargetF1
This way, the TargetF1 fields created will have the following values:
1
blank
2
3
Collapse contexts makes sure that a target is created, even if there is a context change specified at the source.
Hope this is clear.
Regards,
Smitha. -
Hi everyone
I've got a problem with maps on my E72.
I've seen advert that Nokia is going to let everyone use maps for free on selected models.
I was going to buy Sat Nav for whole Europe as I travel a lot and I was going to change my old N95. I thought I could do both in one new phone. Checked all the available models and chose E72. It said it;s got GPS and you don't need to use your network and spend fortune on internet connection. Got it from eBay for £270.
I installed Ovi Maps from internet and the first thing that surprised me was it had 'only' 7-8MB.
I thought that something was wrong, maps for 72 countries couldn't be 8MB big.
After some time I managed to set my e72 up. Put my Maps on and...
It takes loads of time to find GPS connection, but the worst thing is if I type lets say Paris it doesn't find anything. Map has wholes, like suddenly the roads end and there's nothing there.
My question is what am I doing wrong? Do I need to download something more? I didn't have any maps on my phone when I bought it. Where can I find them?
If someone could help I'd appreciate it.
Thanks a lot.I forgot to mention that when I choose a destination it keeps saying Calculating route all the time. I waited about 15 minutesand it didn't calculate anything.
-
Problem with maps in Mavericks on iMac
I have a problem with my Maps on Mavericks.
I can open it just fine, no crash or whatever but the map itself just won't load, whatever mode it is on. Here is the screenshot of my Maps:
As you can see, it just stays blank all the time.
I'm also running Parallels 9 and don't know if that has something to do with problem.Spent days trying various fixes, but this is the one that did it for me. Thanks!
livetowin
Re: Problem with maps in Mavericks on iMac
Dec 8, 2013 7:14 PM (in response to robin1943)
Try this
Since my date and time were incorrect and imessage was not working as well, I tried this
1. Go to system preferences and click date and time
2. Select date and time tab
3. Uncheck "set date and time automatically" and manually enter the correct time
4. Go to time zone tab and uncheck the box there too
5. Go back to date and time tab and now check the box "set date and time automatically"
6. Then check the box in time zone as well
Now open maps and see if it works! -
Creating a job for a procedure with an input parameter
Hi,
I want to create a job for a procedure ( sp_proc ) with a input parameter.
The input parameter is a date value.
As per the syntax for dbms_job.submit procedure;
dbms_job.submit (
job IN BINARY_INTEGER,
what IN VARCHAR2,
next_date IN DATE,
interval IN VARCHAR2 DEFAULT 'NULL',
no_parse IN BOOLEAN DEFAULT FALSE);
How should the procedure be declared in the 'what' parameter of the dbms_job.submit procedure ?
Please guide.
Thanks.Hi,
You are wright, I have found this thread [DBMS_JOB -- how to pass parameters to the job|http://asktom.oracle.com/pls/asktom/f?p=100:11:0::::P11_QUESTION_ID:351033761220].
Regards, -
Hello gurus !
I'm newbie on using OWB.
How does the "Mapping input parameter" work ?
If I place it on my mapping and afterwards I generate the mapping and run the mapping via Control Center Manager, The Control Center should ask me for value of the parameters or not ?
Thanks in advance
MarceloI search this forum for the same topic and found
Re: OWB 10.2 PARIS - How do you enter mapping parameters?
for OWB 10gR2
In Design center :
Tools --> Preferences --> Deployment --> process
check "prompt for execution parameters -
Problem with the input file format to be stored in database
Hi,
I am facing some problem with the input format. I am using the table name as data.employee. But i could not able to process the message forward. I am getting this error,
com.ibm.db2.jcc.c.SqlException: java.sql.Connection.close() requested while a transaction is in progress on the connection.The transaction remains active, and the connection cannot be closed.
Can you please help me prposing a solution for this format.
Thanks,
SOoryaI think you are missing out the COMMIT operation.
At the DB2 end before closing the connection if you do a 'COMMIT' then this may remove your error.
i.e. after you close the Resultset>close the statement object> perform 'COMMIT' operation--> then close the connection.
Also refer :-
http://www.dbforums.com/archive/index.php/t-976407.html
http://www.dbforums.com/showthread.php?t=1628183
I hope this will help you.
Thanks,
Vijaya -
Problem with mapping the Entity beans onto database tables
Hi,
I got a problem with mapping the Entity beans onto database tables. Here are what I did:
First Step:
asant capture-schema
Second Step:
capture-schema -driver com.pointbase.jdbc.jdbcUniversalDriver -dburl jdbc:pointbase:server://localhost/sun-appserv-samples -username pbPublic -password pbpublic -table APPLICANT -table APPLICANTSKILL -table CUSTOMER -table LOCATION -table job -table JOBSKILL -table SKILL -out build/agency.dbschema
The first step was fine. But, in the second step, I got the error message as follow:
using dburl:jdbc:pointbase:server://localhost/sun-appserv-samples
using username:pbPublic
using password:pbpublic
using driver:com.pointbase.jdbc.jdbcUniversalDriver
using schemaname:null
using output file:build/agency.dbschema
JDO71100: Failed to find a class. Verify that the class is available on your CLASSPATH
java.lang.ClassNotFoundException: com.pointbase.jdbc.jdbcUniversalDriver
at java.net.URLClassLoader$1.run(URLClassLoader.java:199)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:274)
at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:141)
at com.sun.forte4j.modules.dbmodel.jdbcimpl.ConnectionProvider.<init>(Co
nnectionProvider.java:38)
at com.sun.jdo.api.persistence.mapping.ejb.CaptureSchema.main(CaptureSch
ema.java:130)
at com.sun.jdo.spi.persistence.support.ejb.util.CaptureSchemaWrapper.mai
n(CaptureSchemaWrapper.java:29)
Thanks for your help!You need to add the pbclient.jar or some similar name like that, in the CalssPath.
-
I have I.O.S. 6.0.1 and i live in Georgia, Tbilisi. I have got the problem with maps. It does not get directions. Per exemple it was working in italy but in my cuntry it does not work. Could u explain me what can i do to make my maps work in Georgia?
Thank uClear the cache and the cookies from sites that cause problems.
"Clear the Cache":
*Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
"Remove Cookies" from sites causing problems:
*Tools > Options > Privacy > Cookies: "Show Cookies" -
Problem with Map Loader 3.0.28.0 and 5800XM
Hi all, i have a problem with maps upload to my mobile, whenever i start Map Loader i see a message: You have connected at least one phone (Soft) without a Maps drive. Either you are using an old Map version - .. - or have never started your Maps application... I use USB PC-Suite mode, I have had run Maps application on my phone before i try to connect Map Loader, the Maps version installed on the phone is v3.03 10wk01 b05 - so that's obviously not a reason!! Now i can't install new maps anymore - i just can click this error window away and choose some maps, they would be downloaded from the Internet, but they would not appear on my mobile! With a previous version of the map loader (don't know the version number any more, and previous maps version on the phone, i have no problem) I also need a link to Maps Updater due the Nokia site malfunction - couldn't find this software anymore.... sorry my poor english :-)
Nokia users - the biggest beta test community of the world!Problem solved! The STUPID software searchs for ALL mass storage devices attached to your computer, so I got error messages all the time until I unplug my USB Hard drive.
Thank you Nokia guys, your were great help by solving this problem .....
By the way, the STUPID software doesn't shows the maps that would be all ready installed on the phone, and you couldn't say that the upload of the maps was really successful until you waisting your time watching the progress bar to the end.
I wouldn't be suprise if you can install the same map twice so it takes the twice space....
regards, and sorry for my poor english
Nokia users - the biggest beta test community of the world! -
Web service data control with complex input parameter problem
Hi!
I'm making ADF web app, using JDev 11.1.1.2.0. I have to call a web service (using a data control), which has complex input parameter (array of complex objects).
I followed steps from Susan Duncan blog: http://susanduncan.blogspot.com/2006/09/dealing-with-complex-input-params-in.html , but I ran into a problem.
As Susan wrote, I changed submit's button action binding to an operation in a managed bean, which returns array of objects and everything works fine. I can call a WS and my table shows the result.
The problem is, that after I change button's action binding to my manage bean, row selection in result table doesn't work anymore (I allways get NullPointerException).
What can be done here?
Can somebody please help?Hi,
I also have similar type of problem where I need to invoke a Web service with Complex input parameters.
I followed Susan's blog but I stuck at a point where methos getItem is created.
Can anyone tell me how to get that method for my requirement.
If possible can you guys share your solutions here.
Thanks in advance. -
Problem with direct input program while uploading data into database
TABLES: BGR00, " Mappensatz
BMM00, " MM01/MM02 BTCI-Kopfdaten
BMMH1, " MM01/MM02 Hauptdaten
BMMH2, " Länderdaten (Steuern)
BMMH3, " Prognosewerte
BMMH4, " Verbrauchswerte
BMMH5, " Kurztexte
BMMH6, " Mengeneinheiten
BMMH7, " Langtexte
BMMH8. " Referentielle EAN's
Satztypen
DATA: MAPPENSATZ LIKE BMM00-STYPE VALUE '0',
KOPFSATZ LIKE BMM00-STYPE VALUE '1',
HAUPTSATZ LIKE BMM00-STYPE VALUE '2',
KUN_SATZ LIKE BMM00-STYPE VALUE 'Z',
LANDSATZ LIKE BMM00-STYPE VALUE '3',
PROGSATZ LIKE BMM00-STYPE VALUE '4',
VERBSATZ LIKE BMM00-STYPE VALUE '5',
KTEXTSATZ LIKE BMM00-STYPE VALUE '6',
MESATZ LIKE BMM00-STYPE VALUE '7',
TEXTSATZ LIKE BMM00-STYPE VALUE '8',
EANSATZ LIKE BMM00-STYPE VALUE '9'.
Common Data Bereich fuer die extern aufgerufenen Routinen
Initialstrukturen
DATA: BEGIN OF COMMON PART RMMMBIMY.
DATA: BEGIN OF I_BMM00.
INCLUDE STRUCTURE BMM00. " Kopfdaten
DATA: END OF I_BMM00.
DATA: BEGIN OF I_BMMH1.
INCLUDE STRUCTURE BMMH1. " Haupdaten
DATA: END OF I_BMMH1.
DATA: BEGIN OF I_BMMH2.
INCLUDE STRUCTURE BMMH2. " Länderdaten
DATA: END OF I_BMMH2.
DATA: BEGIN OF I_BMMH3.
INCLUDE STRUCTURE BMMH3. " Prognosewerte
DATA: END OF I_BMMH3.
DATA: BEGIN OF I_BMMH4.
INCLUDE STRUCTURE BMMH4. " Verbrauchswerte
DATA: END OF I_BMMH4.
DATA: BEGIN OF I_BMMH5.
INCLUDE STRUCTURE BMMH5. " Kurztexte
DATA: END OF I_BMMH5.
DATA: BEGIN OF I_BMMH6.
INCLUDE STRUCTURE BMMH6. " Mengeneinheiten
DATA: END OF I_BMMH6.
DATA: BEGIN OF I_BMMH7.
INCLUDE STRUCTURE BMMH7. " Textzeilen
DATA: END OF I_BMMH7.
DATA: BEGIN OF I_BMMH8.
INCLUDE STRUCTURE BMMH8. " Referentielle EAN's
DATA: END OF I_BMMH8.
DATA: END OF COMMON PART.
DATA: WA LIKE TEDATA-DATA.
Einzelfelder
DATA: GROUP_COUNT(6) TYPE C, " Anzahl Mappen
TRANS_COUNT(6) TYPE C, " alte Definition für rmmmbim0
SATZ_COUNT LIKE MUEB_REST-TRANC, " Trans.zähler neu
H_IND_COUNT LIKE MUEB_REST-D_IND, " Index welches Feld zurücks.
SATZ2_COUNT(6) TYPE C. " Anz. Sätze je Trans. ohne Kopfsatz
DATA: XEOF(1) TYPE C, " X=End of File erreicht
XHAUPTSATZ_EXIST TYPE C, " X=Hauptsatz zum Kopf exi.
NODATA(1) TYPE C. " kein BI für dieses Feld
mk/15.08.94:
DATA: GROUP_OPEN(1) TYPE C. " X=Mappe schon geöffnet
*eject
Konstanten
DATA: C_NODATA(1) TYPE C VALUE '/'. " Default für NODATA
DATA: MATNR_ERW LIKE MARA-MATNR VALUE '0 '.
DATA: MATNR_ERW_INT LIKE MARA-MATNR. "internal sight of '0 '
DATA: MATNR_LAST LIKE MARA-MATNR. "Material number
mk/11.08.94 2.1H:
If this flag is initial, the database updates will be done directly
during background maintenance instead of using a separate update
task. (no usage of this flag in dialogue mode!)
DATA: DBUPDATE_VB(1) VALUE ' '. "note 306628
data: matsync type mat_sync. "wk/99a no update in dialog if called
***INCLUDE ZMUSD070.
TABLES: MARA, "Material Master: General Data
MARC, "Material Master: C Segment
MARD, "Material Master: St Loc/Batch
MBEW, "Material Valuation
MVKE, "Material Master: Sales Data
MLGN, "Material Data per Whse Number
MLAN, "Tax Classification: Material
T001W, "Plants/Branches
TBICU.
DATA: BEGIN OF VALUTAB OCCURS 0.
INCLUDE STRUCTURE RSPARAMS.
DATA: END OF VALUTAB.
DATA: BEGIN OF VARTECH.
INCLUDE STRUCTURE VARID.
DATA: END OF VARTECH.
DATA: PARMS LIKE ZXXDCONV.
DATA: REC_COUNT TYPE I,
REC_COUNT_BAD TYPE I,
ZJOBID LIKE TBIZU-JOBID,
ZJOBCOUNT LIKE TBIZU-JOBCOUNT,
ZMATNR LIKE MARA-MATNR,
ZTEXT(80) TYPE C.
CONSTANTS: LIT_ZERO(18) TYPE C VALUE '000000000000000000',
LIT_CHAR TYPE C VALUE '_',
LIT_CREATE LIKE BMM00-TCODE VALUE 'MM01',
LIT_CHANGE LIKE BMM00-TCODE VALUE 'MM02',
LIT_CHECK(1) TYPE C VALUE 'X'.
DATA: BEGIN OF INP_DATA OCCURS 0,
MATNR(18) TYPE C, " Material code
UMREN(6) TYPE C, " Denominator
MEINH(3) TYPE C, " Alternate UOM
UMREZ(6) TYPE C, " Numerator
END OF INP_DATA.
*eject
SELECTION-SCREEN BEGIN OF BLOCK INOUT WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT (13) TEXT-004.
PARAMETERS: P_PC RADIOBUTTON GROUP SRC DEFAULT 'X'.
SELECTION-SCREEN COMMENT (6) TEXT-005.
PARAMETERS: P_UNIX RADIOBUTTON GROUP SRC.
SELECTION-SCREEN COMMENT (6) TEXT-006.
PARAMETERS: P_DS_TYP LIKE ZXXDCONV-DS_TYP
DEFAULT 'ASC'.
SELECTION-SCREEN END OF LINE.
*SELECT-OPTIONS: S_PATH FOR PARMS-PATH
NO INTERVALS
LOWER CASE.
PARAMETERS: P_PATH TYPE RLGRAP-FILENAME.
PARAMETERS: P_HDRLIN LIKE ZXXDCONV-HDR_LINES
DEFAULT 0,
P_JOBNAM LIKE TBICU_S-JOBNAME
MEMORY ID BM1,
P_DI_EXE AS CHECKBOX
DEFAULT LIT_CHECK,
P_MAPPE LIKE BGR00-GROUP
DEFAULT 'MRP_UOM_LOAD'
NO-DISPLAY.
SELECTION-SCREEN END OF BLOCK INOUT.
*eject
AT SELECTION-SCREEN ON VALUE-REQUEST FOR P_PATH.
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
EXPORTING
PROGRAM_NAME = SYST-REPID
DYNPRO_NUMBER = SYST-DYNNR
FIELD_NAME = 'P_PATH'
CHANGING
FILE_NAME = S_PATH-LOW
FILE_NAME = P_PATH
EXCEPTIONS
MASK_TOO_LONG = 1
OTHERS = 2.
AT SELECTION-SCREEN.
Set up parameter record
PARMS-UNIX = P_UNIX.
PARMS-PC = P_PC.
PARMS-DS_TYP = P_DS_TYP.
PARMS-JOBNAME = P_JOBNAM.
PARMS-MAPPE = P_MAPPE.
PARMS-HDR_LINES = P_HDRLIN.
*eject
Main Processing Routine *
START-OF-SELECTION.
Initialization
PERFORM 0000_HOUSEKEEPING.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
Process input files
SORT S_PATH BY SIGN OPTION LOW.
MOVE S_PATH-LOW TO PARMS-PATH.
MOVE P_PATH TO PARMS-PATH.
LOOP AT S_PATH.
AT NEW LOW.
CLEAR INP_DATA.
REFRESH INP_DATA.
Read source data into internal table
PERFORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
Processs each record in internal table
ZTEXT = TEXT-007.
ZTEXT+13 = PARMS-DS_NAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
Initialize transaction data in I_BM00
PERFORM 0500_INIT_BMM00.
LOOP AT INP_DATA.
Reset tables for each record
BMM00 = I_BMM00.
BMMH1 = I_BMMH1.
BMMH6 = I_BMMH6.
Load structures with data
MOVE-CORRESPONDING INP_DATA TO BMM00.
PERFORM 2000_WRITE_OUTPUT USING BMM00.
MOVE-CORRESPONDING INP_DATA TO BMMH1.
PERFORM 2000_WRITE_OUTPUT USING BMMH1.
MOVE-CORRESPONDING INP_DATA TO BMMH6.
PERFORM 2000_WRITE_OUTPUT USING BMMH6.
REC_COUNT = REC_COUNT + 1.
ENDLOOP.
ENDAT.
ENDLOOP.
IF REC_COUNT GT 0
AND P_DI_EXE EQ LIT_CHECK.
PERFORM 3000_START_DI_JOB.
ENDIF.
WRITE: / TEXT-008,
REC_COUNT.
PERFORM 9000_END_OF_JOB.
*eject
Include containing common routines used by direct input programs
INCLUDE ZMUSD071.
*eject
FORM 0500_INIT_BMM00 *
Initialize I_BMM00 with transaction code and views selected *
FORM 0500_INIT_BMM00.
***this changes done by samson**
if not inp_data[] is initial.
select single matnr from mara INTO ZMATNR where matnr = inp_data-matnr.
if sy-subrc = 0.
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
else.
I_BMM00-TCODE = LIT_CREATE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
endif.
endif.
**this changes above done by samson**
Transaction code
I_BMM00-TCODE = LIT_CHANGE.
Basic data
I_BMM00-XEIK1 = LIT_CHECK.
ENDFORM.
INCLUDE ZMUSD069.
*eject
FORM 0000_HOUSEKEEPING *
Initialization routines *
FORM 0000_HOUSEKEEPING.
PERFORM 0010_LDS_NAME.
PERFORM 0020_DS_NAME.
PERFORM 0030_OPEN_FILE.
PERFORM 0040_INIT_STRUCTS.
ENDFORM.
*eject
FORM 0010_LDS_NAME *
Obtain logical file name from DI job details *
FORM 0010_LDS_NAME.
Check valid job name
SELECT SINGLE * FROM TBICU
WHERE JOBNAME EQ PARMS-JOBNAME.
IF SY-SUBRC EQ 0.
CALL FUNCTION 'RS_VARIANT_VALUES_TECH_DATA'
EXPORTING
REPORT = TBICU-REPNAME
VARIANT = TBICU-VARIANT
IMPORTING
TECHN_DATA = VARTECH
TABLES
VARIANT_VALUES = VALUTAB
EXCEPTIONS
VARIANT_NON_EXISTENT = 1
VARIANT_OBSOLETE = 2
OTHERS = 3.
IF SY-SUBRC EQ 0.
READ TABLE VALUTAB WITH KEY 'LDS_NAME'.
MOVE VALUTAB-LOW TO PARMS-LDS_NAME.
ELSE.
MESSAGE I001 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ELSE.
MESSAGE I000 WITH PARMS-JOBNAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0040_INIT_STRUCTS *
Initialize structures for direct input records *
FORM 0040_INIT_STRUCTS.
Start of standard SAP initialization from example program RMMMBIME
*------- Write session record -
CLEAR BGR00.
BGR00-STYPE = MAPPENSATZ.
BGR00-GROUP = PARMS-MAPPE.
BGR00-NODATA = C_NODATA.
BGR00-MANDT = SY-MANDT.
BGR00-USNAM = SY-UNAME.
BGR00-START = BGR00-NODATA.
BGR00-XKEEP = BGR00-NODATA.
PERFORM 2000_WRITE_OUTPUT USING BGR00.
*----- Initialize structures -
NODATA = BGR00-NODATA.
PERFORM INIT_STRUKTUREN_ERZEUGEN(RMMMBIMI) USING NODATA.
End of standard SAP initialization from example program RMMMBIME
ENDFORM.
*eject.
FORM 3000_START_DI_JOB *
Start direct input job *
FORM 3000_START_DI_JOB.
ZTEXT = 'Starting '(021).
ZTEXT+9 = TBICU-JOBNAME.
PERFORM 4000_PROGRESS_INDICATOR USING ZTEXT.
CALL FUNCTION 'BI_START_JOB'
EXPORTING
JOBID = ' '
JOBTEXT = TBICU-JOBNAME
REPNAME = TBICU-REPNAME
SERVER = TBICU-EXECSERVER
VARIANT = TBICU-VARIANT
NEW_JOB = 'X'
CONTINUE_JOB = ' '
START_IMMEDIATE = 'X'
DO_NOT_PRINT = 'X'
USERNAME = SY-UNAME
IMPORTING
JOBID = ZJOBID
JOBCOUNT = ZJOBCOUNT
EXCEPTIONS
JOB_OPEN_FAILED = 1
JOB_CLOSE_FAILED = 2
JOB_SUBMIT_FAILED = 3
WRONG_PARAMETERS = 4
JOB_DOES_NOT_EXIST = 5
WRONG_STARTTIME_GIVEN = 6
JOB_NOT_RELEASED = 7
WRONG_VARIANT = 8
NO_AUTHORITY = 9
DIALOG_CANCELLED = 10
JOB_ALREADY_EXISTS = 11
PERIODIC_NOT_ALLOWED = 12
ERROR_NUMBER_GET_NEXT = 13
OTHERS = 14.
IF SY-SUBRC EQ 0.
WRITE: / 'Direct input job'(022), TBICU-JOBNAME, 'started'.
ELSE.
WRITE: / 'Direct input failed with return code'(023), SY-SUBRC.
ENDIF.
FORM 0020_DS_NAME.
CALL FUNCTION 'FILE_GET_NAME'
EXPORTING
CLIENT = SY-MANDT
LOGICAL_FILENAME = PARMS-LDS_NAME
OPERATING_SYSTEM = SY-OPSYS
IMPORTING
FILE_NAME = PARMS-DS_NAME
EXCEPTIONS
FILE_NOT_FOUND = 1
OTHERS = 2.
IF SY-SUBRC NE 0.
MESSAGE E002 WITH PARMS-LDS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 0030_OPEN_FILE *
Open physical file for output *
FORM 0030_OPEN_FILE.
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE. "thg191105
OPEN DATASET PARMS-DS_NAME FOR OUTPUT IN TEXT MODE
encoding default. "thg191105
IF SY-SUBRC NE 0.
MESSAGE E003 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
FORM 1000_GET_SOURCE_DATA *
Read source data into internal table *
--> INP_DATA " Name of internal table passed as parameter *
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.
DATA: FILENAME LIKE RLGRAP-FILENAME. "SRY28NOV05
DATA: W_FILENAME TYPE STRING. "SRY28NOV05
DATA: W_FTYP(10) TYPE C VALUE 'DAT'. "SRY28NOV05
MOVE PARMS-DS_NAME TO FILENAME. "SRY28NOV05
MOVE PARMS-DS_NAME TO W_FILENAME. "SRY28NOV05
*BEGIN OF BLOCK COMMENT BY SRY28NOV05
CALL FUNCTION 'WS_DOWNLOAD'
EXPORTING
BIN_FILESIZE = ' '
CODEPAGE = ' '
FILENAME = FILENAME
FILETYPE = 'DAT'
MODE = ' '
WK1_N_FORMAT = ' '
WK1_N_SIZE = ' '
WK1_T_FORMAT = ' '
WK1_T_SIZE = ' '
COL_SELECT = ' '
COL_SELECTMASK = ' '
importing
filelength =
TABLES
DATA_TAB = INP_DATA
FIELDNAMES =
EXCEPTIONS
FILE_OPEN_ERROR = 1
FILE_WRITE_ERROR = 2
INVALID_FILESIZE = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
OTHERS = 8.
*END OF BLOCK COMMENT BY SRY28NOV05
*BEGIN OF BLOCK ADDED BY SRY28NOV05
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
FILENAME = W_FILENAME
FILETYPE = W_FTYP
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
FILE_WRITE_ERROR = 1
NO_BATCH = 2
GUI_REFUSE_FILETRANSFER = 3
INVALID_TYPE = 4
NO_AUTHORITY = 5
UNKNOWN_ERROR = 6
HEADER_NOT_ALLOWED = 7
SEPARATOR_NOT_ALLOWED = 8
FILESIZE_NOT_ALLOWED = 9
HEADER_TOO_LONG = 10
DP_ERROR_CREATE = 11
DP_ERROR_SEND = 12
DP_ERROR_WRITE = 13
UNKNOWN_DP_ERROR = 14
ACCESS_DENIED = 15
DP_OUT_OF_MEMORY = 16
DISK_FULL = 17
DP_TIMEOUT = 18
FILE_NOT_FOUND = 19
DATAPROVIDER_EXCEPTION = 20
CONTROL_FLUSH_ERROR = 21
OTHERS = 22.
IF SY-SUBRC NE 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*END OF BLOCK ADDED BY SRY28NOV05
ENDFORM. " 2100_WS_DOWNLOAD
*eject
FORM 4000_PROGRESS_INDICATOR *
Write progress text to status bar *
--> TEXT " Text passed as parameter *
FORM 4000_PROGRESS_INDICATOR USING TEXT.
CALL FUNCTION 'SAPGUI_PROGRESS_INDICATOR'
EXPORTING
PERCENTAGE = 0
TEXT = TEXT
EXCEPTIONS
OTHERS = 1.
ENDFORM.
*eject.
FORM 9000_END_OF_JOB *
Close files on UNIX *
FORM 9000_END_OF_JOB.
CLOSE DATASET PARMS-DS_NAME.
ENDFORM.
FORM 1000_GET_SOURCE_DATA TABLES INP_DATA.
CALL FUNCTION 'Z_FILE_UPLOAD'
EXPORTING
UNIX = PARMS-UNIX
PC = PARMS-PC
FILETYPE = PARMS-DS_TYP
FILENAME = PARMS-PATH
HDR_LINES = PARMS-HDR_LINES
TABLES
DATA_TAB = INP_DATA
EXCEPTIONS
CONVERSION_ERROR = 1
FILE_OPEN_ERROR = 2
FILE_READ_ERROR = 3
INVALID_TABLE_WIDTH = 4
INVALID_TYPE = 5
NO_BATCH = 6
UNKNOWN_ERROR = 7
INVALID_SOURCE = 8
OTHERS = 9.
ENDFORM.
*eject
FORM 2000_WRITE_OUTPUT *
Write record in standard SAP structure to UNIX file *
--> I_STRUCT " Name of record passed as parameter *
*FORM 2000_WRITE_OUTPUT USING I_STRUCT."SRY28NOV05
FORM 2000_WRITE_OUTPUT USING I_STRUCT TYPE ANY. "SRY28NOV05
TRANSFER I_STRUCT TO PARMS-DS_NAME.
IF SY-SUBRC NE 0.
MESSAGE E004 WITH PARMS-DS_NAME.
MESSAGE A099.
ENDIF.
ENDFORM.
*eject
*& Form 2100_WS_DOWNLOAD
text *
--> p1 text
<-- p2 text
FORM 2100_WS_DOWNLOAD TABLES INP_DATA.Hi,
Thnaks for your reply, This is my requirement.
Here my problem is i am trying to upload the data from flatfile which contain materil number, denominator, Actual UOM, Nominator field values.
Which is the data i need to upload into MM02 and MM01, if material number is new then it has to create the material, if material is already existing it has to update the UOM values.
here i am getting data into my internal table INP_DATA, from that i am trying to upload the data to database by using job name MRP_MATERIAL_MASTER_DATA_UPLOAD with direct input program RMDATIND.
when i execute my program i am getting success message all the records writtin from flatfile to application server. and job started message.
then if i go into sm37 screen there i execute the job it is also giving active message. if i refresh it it is showing job completed message.
then i look at job log status. there i found that for existing material it is expecting material type, for new material it is giving some gravity error.
So could u help me in this it will be gr8.
Thanks & Regards,
RamNV
Maybe you are looking for
-
How can I move my apps from one computer to another?
I got a new computer which means I have to sync my Iphone to my new computer. However, this means my apps are going to be deleted off my phone when I do sync it. Does anyone know how to move these apps to my new computer?
-
Update problems, requiring pin to unlock IPAD but I never set one up.
after updating, my IPAD now requires a pin to unlock. the problem is I don't know what the pin is since I never set one up. How do I fix this? I have tried resetting twice, but that doesn't work.
-
I plan to stand up a production Oracle Database 12c on Oracle Ent. Linux 6.5 64-bit. Can anyone tell me if there's a 12c pre-install RPM like there was for 11gR2 to install the plethora of dependancies required to get the software up / running?Da Als
-
Sorry but I look in all the menu and help file and I dont find what I was able to do with my Imovie6. Is it possibe to export from iMovie 08 to a mini-dv tape using a camcorder the way I was able to in iMovie 06? Is Imovie 08 not suppose to be an imp
-
Failover Cluster on Server 2012 R2
Hi I`m trying to deploy a Failover Cluster with two servers, both Virtual machines on Vmware, OS- server 2012 r2. Both servers can see all disks from storage. For some reason, I keep getting these messages(for all disks) when I run "Validate Configur