Problems with microphone on my iPhone5 after updating iOS7

Hello excuse me about my english .
After updating my iPhone to iOs7 i have had some major problems with microphone . First day when i notice the problem i could not talk to no one , was calling my family all the day and they could not hear me (I could hear my self talking with a second voice) but after a restart of phone i think its fixed because im not having troubles atm .
Now i have a bigger problem again with microphone : Im far away from home and im talking with my family with apps like Skype Tango Viber etc but from the moment i installed iOS7 none of them will work . I cant hear them and they cant hear me when they have a iPhone. Example :
Me(iphone) + parents(iphone) = cant hear me
Me(iphone) + parent (android phone) = i can hear them they cant hear me .
Please give me a solution im really angry with Apple's product at the moment .

Hi Donino!
Here's an article with some troubleshooting steps relevant to this issue:
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/TS1630
Thanks for using the Apple Support Communities!
Cheers,
Braden

Similar Messages

  • HT1476 I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out i

    I have problem with my Iphone 4S, only after updating the OS 7.X. My Iphone battery charge is losing down in a minute. My battery charge is just decreasing from 100% to 10% in less than two hours, without any application works. pls do help me out in this.

    Hi melvin victor,
    Welcome to the Support Communities!
    The information below may help you troubleshoot your iPhone battery issue:
    iPhone Battery and Power - Apple Support
    http://www.apple.com/support/iphone/repair/battery-power/
    Battery & power
    Is your iPhone battery draining too quickly or not holding a charge? Try restarting it first. You can also adjust several settings to extend the battery life of your iPhone.
    I hope this information helps ....
    - Judy

  • Problems with Wifi on iphone 4 after updating ot iOS 5.1

    After I update to iOS 5.1 is started having problems with my home wifi.
    After the update every thing seems to be running alright after after a day my connection was lost.
    When I tried to reconnect I got the message "unable to join the network".
    I tried the following things:
    - Forget network, reconnect: This did not help
    - restart iPhone: did not help.
    - Reset network settings: did not help.
    The next step I tried was to restart my router.
    This solved the problem, but after 1 day I have the same issue.
    When I go to work there is no problem when I get back home same thing over again.
    This is going on ever since I update to iOS 5.1
    Before the update I had no problems.
    Does anyone have more perment solution.

    I have the same issue with my iPhone4 running ios5.1. I have tried everything you mentioned above as well as updating the firmware on my router, setting my router to broadcast on 2.4GHZ or 5GHZ exclusively,  assigning my iPhone a static address as well as a multitude of other mentioned fixes. I have determined this is NOT an issue with my WiFi Network, or Router. All other wireless devices in my home do not have this issue; except for my partner's iPhone4S also running ios5.1. It's WiFi issues are identical to mine. Our other Smartphone, an  HTC running Android, has no WiFi issues whatever.
    When I attempt to use WiFi on other networks with my iPhone4, I encounter the same issues: Intermittent connectivity,reporting that it is "Unable to Join Network", showing a strong WiFi signal on screen and yet having no WiFi connectivity, showing WiFi connectivity on screen and strong signal strength, and having no IP Address(etc) under WiFi Networks Settings. After spending a great deal of time online looking for solutions I have determined the following:
    This is clearly an Apple Hardware or Software issue. I hope Apple eventually addresses this issue because it is extremely frustrating!

  • Problems with Mail, Safari and iTunes after updating to 10.5.6

    Hi all,
    after installing 10.5.6 I have problems with Mail, Safari and iTunes.
    The time to open mails, websides and iTunes store is increasing dramatically since the update. If I open a webside parallel with Safari and Firefox, Safari needs minimum 15 times longer to open the complete side. Mails containing HTML-code also needs a long time to be opened. Tha same Problem with iTunes store. Connecting to the Store costs at least 30 - 40 seconds. And unfortunately for every iTunes store side I open. Its terrible
    Any idea or workaroung to solve that problem?
    Regards
    Michael

    First, run Disk Utility and repair permissions and then restart.
    I installed the 10.5.6 Combo update. Sometimes things get "lost in the translation" when you use Software Update depending on your installation. Perhaps you can download 10.5.6 Combo from the website and install it from your desktop.

  • Problems with iPhoto 11.1.4 after update

    iPhoto automatically upgraded to 11.1.4 on February 1st, since when I have not been able to access my iPhoto libraries.  I had upgraded to "Mavericks" from 10.6 in November 2013 and then installed the compatible version of Microsoft Office and have been using both Office and iPhoto since then, so I conclude that (a) it is not an old problem and (b) it is not a "cross-contamination" problem.
    On starting iPhoto, the message appears that I do not have permission to access the library or that the disk is locked.  Since I created the library under my user-id, I find it difficult to believe that I do not have permission, and I have checked (4 or more times) that the disk is not locked.
    A further message then told me that I needed to use the 'library updater', which I downloaded and ran.  I am still unable to access the library.
    I have not "sync'd" my iPad nor my iPhone since then, as I am concerned that this could endanger the photographs downloaded from my MacBook.
    Does anyone know of a problem with iPhoto 11.1.4 and older libraries which have been progressively updated (from pre-2009 through "Snow Leopard")?

    The problem was not with the location - which had not changed - of the library but with the library itself.
    I checked similar queries / issues and found an app "iPhoto Library Manager" which HAS solved the problem and, when I install the non-free version (which I have now purchased), it will help me remove the hundreds of duplicates & multiples which have infiltrated my library since about 2007!
    Thank you for your response - it showed that someone cared!
    John

  • Problem with login in Folio Builder after update to v26

    After updating to v26 I can't sign in to Folio Builder. Whan I press «sign in» either in panel or in panel menu, nothing happens.
    Help please!

    You can try downgrading to downgrading to older version:
    Mac: http://download.adobe.com/pub/adobe/dpsdesktoptools/mac/2.06.1/AdobeDigitalPublishingPatch -All.dmg
    Windows: http://download.adobe.com/pub/adobe/dpsdesktoptools/win/2.06.1/AdobeDigitalPublishingPatch -All.zip
    Update:
    If you have cracked (Illegal) InDesign, I wouldn't work. If you don't know, if it is cracked, go to help section and look for Log In and Update buttons, when they are disabled. If they are, you have cracked (Illegal), you need to buy InDesign.

  • Problem with connection to University wifi after update

    hi,
    Before the latest os lion update I could use safari easily to connect to my university internet.However, after updating I cannot seem to get the screen where I can input my university username and password. Mail does not either either and when opened under this paradigm it prevents my computer from shutting down.
    When I use firefox I am able to connect to the internet properly.
    Please advise...

    contact university IT deprtment and see what they say.

  • Problems with the graphic card driver after update?

    First my brand new Macbooks main board had to be replaced since I couln`t charge the battery. After 3 weeks on service it`s back. Everything is fine until I update the drivers. After the restart the screen displays totaly wrong colors. Take a look below. What could be the problem, and can I solve it?
    http://www.blog.tyrkiskpepper.com/blog_img/screen.jpg
    Thanks,
    Andreas

    Some user post that when they reset the pram and pmu and change the resolution screen to its native (biggest) resolution, it will solve the problem.
    Do some more search on discussion search column on your right upper corner.
    Good Luck

  • Does anyone else have a problem with their text tone 'glitching' after updating to iOS 5?

    Since updating to iOS 5, my text tone 'glitches' whenever i recieve a message. By glictching, I mean that it sounds doubled or sometimes it plays, stops then plays again very quickly. I've tried resetting the phone, this works for a few messages then starts again :/ Any suggestions on how to fix this would be much appreciated.
    Many thanks

    It would be nice to get this issue fix.  I didn't notice it until today.  The text tone is very sporatic, or delayed, alerts me twice, and it's just not what it used to be like.  C'mon Apple - fix the glitches, please.

  • I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    I'm having problem with my iphone4S first when i updated software to 7.1 after a month or so wifi turned grayed, second when i tried to turn off in the night as soon as i turn it on battery empty now its totaly dead. What should i do with it?

    1) This is because of software version 1.1. See this
    thread for some options as to how to go back to 1.0,
    which will correct the problem...
    http://discussions.apple.com/thread.jspa?threadID=3754
    59&tstart=0
    2) This tends to happen after videos. Give the iPod a
    minute or two to readjust. It should now be more
    accurate.
    3) This?
    iPod shows a folder icon with exclamation
    point
    4) Restore the iPod
    5) Try these...
    iPod Only Shows An Apple Logo and Will Not Start
    Up
    iPod Only Shows An Apple Logo
    I think 3,4, and 5 are related. Try the options I
    posted for each one.
    btabz
    I just noticed that one of the restore methods you posted was to put it into Disk Mode First rather than just use the resstore straight off, I Have tried that and seems to have solved the problem, If it has thank you. previously I have only tried just restoring it skipping this extra step. Hope my iPod stays healthy, if it doesnt its a warrenty job me thinks any way thanks again

  • Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Is it somebody Except for me Who has problems With waching videos on ipad after the 5.0.1 update

    Hi,
    yes I have big problems as soon as I open the video app i get a total black screen, even the upper bar with the time disappears. I already tried to:
    1. closing the app and reopen it
    2. restart the iPad
    3. restore the iPad via iTunes
    4. Begging the app to work again.

  • Problem with connecting to free wifi after upgrading to Windows 8.1 from Windows 8

    Hi
    I had problems with connecting to free Wifi after upgrading my PC(Notebook) to Windows 8.1 from Windows 8. As I travel a lot within europe, I am used to being able to connect to Free Wifi(those that dont need a key or password to enter) but soon after downloading
    Windows 8.1 I almost never was able to do this. I'd always get «LIMITED» even though the signal was strong.This was so fustrating,so much so that I reset my PC to clear it of Windows 8.1 and am now back to Windows 8.This is a shame because I was really liking
    using Windows 8.1 and if not for this problem(which is a big one) I'd still be using it. If I download Windows 8.1 again from the Windows store what is the probability that I'll have the same problems?
    Thanks Portozzygirl

    More often than not when a device isn't working it is because the driver has become corrupted. Re-installing a fresh copy should help
    http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isnt-working-properly?SignedIn=1
    http://captaindbg.com/how-to-update-drivers-on-windows-7/   (works on win 8 too)
    Wanikiya and Dyami--Team Zigzag

  • TS3694 hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regar

    hey everyone.. i have a problem with my 3Gs iphone.. i updated to the ios5 and now when i open it says that i have to connect it with the itunes. when i connect it says that has an error 28 something like that.. can anyone help me to fix it?? Regards

    Error 23, 28, 29: These errors may indicate a hardware issue with your device. Follow the steps in this article. Also attempt to restore while connected with the white USB Dock Connector cable that shipped with your device, on a known good computer and network to isolate this issue to the device. The MAC address being missing or the IMEI being the default value, (00 499901 064000 0), can also confirm a hardware issue. Out-of-date or incorrectly configured security software can also cause these errors.

  • I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro.

    I am having a problem with very slow start up after expanding RAM on my 2009 Mac Pro (8 Core 2.93GHz). When I run the Mac Pro with 2 x 2Gb RAM it takes 4 seconds before the gray screen, chime and spinning wheel appear.However when I expand the RAM to 20GB the grey screen and chimes appear after a long 20+ second black screen.
    The RAM modules are paored  2 x 4GB Crucial CT51272BA1339.M18FMR and  6 x 2GB SAMSUNG M391B5673FH0-CH9, all DDR3 ECC.
    Reading articles on the internet, I thought it may be damaged RAM modules, but I have completed memtest and all are okay. I have tried changing the pairs around and if I use any paired 2 modules the Mac Pro starts normally, only when I try running more than 2 modules the delayed start up happens. (black screen 20 Seconds)
    I also have tried PRAM and SMU resets after changing the RAM setups, and the issues always occurs when I have more than 2 modules. As you can see I have 6 SAMSUNG modules and even with identical modules the issue happens, when increasing the RAM to more than 2 modules.
    The Mac Pro runs fine after the start up screen and can see all the modules, but has anyone else come across this issue, or have any ideas as to why my Mac Pro is taking 20 seconds to start up with 20 GB RAM?

    Hi there. Thanks for your comments.
    I have tried all the different combinations of RAM setup, and as stated in my initial topic, the Mac Pro boot up time only slows when I have more that 2 modules. Where I place these does not seem to make a difference.
    I have taken the Mac Pro to an Apple Reseller technician yesterday and they where not able to find any RAM errors. Apparently the boot up time is within Apple's acceptable parameters for this set up.
    Could anyone that is running a Mac Pro 2009 with more that 4 modules of RAM, please let me know if the boot up time is normal. ( the time it takes from pressing the power button to seeing the gray screen around 16 - 20 seconds)
    Or is anyone else having the same issues?
    thanks for your responce

  • Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Hello, I have a problem with my mac book pro after running the battery dead on a game.  The display has shrunk leaving two black margins on either side. What to do ?

    Go to System Preferences>Displays and set the resolution to "Best for this computer" (or something to that effect).
    Clinton

Maybe you are looking for