Problems with mini dock

Hi All. Just got my new ipod mini plus ipod mini dock yesterday. When the ipod is docked, it will charge, but it does not seem to be detected by iTunes...any suggestions?
Thanks,
Nikki

Try a reset of the iPod.
MV

Similar Messages

New X220 support dual external monitors with mini dock plus?

Hi,
I need to purchase a new Lenovo laptop in urgent.
But we need to make sure it support dual display to two external monitors. (VGA)
My question is:
(1) we plan to purchase with mini dock plus, it have two HDMI port.
can it support two external monitors for Intel HD Graphics 3000?
( we will close the Lids when use in dual external monitors)
(2) Can i use DVI to VGA convertor convert to VGA for supporting two external monitors
(3) what is the weight difference for X220 SATA HDD and SSD HDD?
Please kindly help in urgent!
Rgds,
Sun
Solved!
Go to Solution.

Hi
Yes, it work.
It must need a Display port to VGA (F) convertor.
Thank you.
Cheers
Sun

Lightroom doesn't recognize mine camera Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
Ronald ( the Netherlands)

Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I already downloaded bbm, but the problem some of my friends i can see their profile pictures and there is a problem to invite a contact either barcode and through pin. Did you experience the same problem with mine???

I am sorry but your question is not completely clear. What Apple product are you having problems with?
If English is not your primary language, try posting in your native language.
Best of luck.

W520 with Mini Dock Plus Series 3 won't detect Dell U2412M Monitor

I have a W520 Thinkpad with a Mini Dock Plus Series 3 with USB 3.0.
Until this morning, I was able to use it with my two external monitors connected via DVI to the Mini Dock.
The two monitors I have are:
Acer V243H
Dell U2412M
The Acer works fine regardless of which DVI port I plug it into.
The Dell refuses to work on either port.
Again, both monitors were working fine as of yesterday.
Any ideas on what might have caused this or what I can do to fix it?

I have the same problem with the minidock and display port monitors. It will not recognize them at all on power up. If I then put the w520 to sleep and wake it up a few times, it will then recognize them and allow me to use them as "projectors".
Before I upgraded the BIOS and nVidia drivers, it would always recognize one of the two, and I used to have to pull the cable out and in again on the second. Now this technique doesnt work - sleep wake is the only work around.

Can't get dual monitors to come back up when docking. T500 with mini dock & XP

I have a T500 with XP installed. I am using it docked into a mini dock attached to two 20inch Viewsonic monitors. One connected via VGA and the other DVI. I setup the dual monitors just fine. Anytime after I undock and boot up the laptop I can't get the dual monitors to automatically display. I have to go into the display properties and re set it up each time. Can anyone suggest any ideas?

When your T500 power-on , press F1 to log in BIOS, and change the option in >config>Display>Boot-Display-Device to Both or VGA, I suppose that it will reslove your problem.

T400 with mini-dock, trying to use a FP with displayport

Hi, I have problem with I'm trying to resolve because someone ordered the wrong FP in our dept. I have a T400 and advanced mini-dock. and trying to connect to a FP that has displayport. I've searched and searched for a solution via the web but with no answer. Has anyone had this issue or know of a solution that wouldn't be very costly? I know i can connect to the VGA but that is already taken from another PC. This FP has dual screen option, takes input from 2 pc's. Any suggestions would be greatly appreciated.

get a vga KVM box, this is the cheapest solution to this problem.
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

Problem with ipod dock and apple remote

I have a problem with my apple remote and my 5th gen ipod on a dock. I set it up and plug it into a TV, yet when i get into a music video playlist- it will only play 4 songs (the same ones) and then go back to the song selection screen. The same thing happens in the movie "tab" as well.
Any ideas?

btabz,
Thanks for your response. No the iPod doesn't respond at all--the volume display doesn't come up or change.
When I press the play/pause or either skip forward or back on the remote, the iPod, while on the dock, lights up and responds to the command as it should. But when I press volume up or down on the remote the iPod does not respond at all.
According to Apple's store info on the remote, the volume up/down controls should work. I am wondering if maybe it doesn't work with the 3Gs for some reason. But if that is the case, Apple should indicate that. It is kind of frustrating to not be able to adjust the volume.
Thanks,
gerb38
17' Aluminum Powerbook Mac OS X (10.4.3)
17' Aluminum Powerbook Mac OS X (10.4.3) 30GB 3G iPod

Router Console Connect Problem With Mini Usb (1941 Series - Os Win7 64Bit) (SOLVED)

I can not connect console with mini usb, my router is cisco 1941 series and my os win7 x64 help me please ?
My problem was solved thanks to this topic;
https://supportforums.cisco.com/discussion/11492306/usb-console-driver-install-failing#comment-9697916

Hi,
Here is how I have managed to enable the communication with the 1941 using the usb A-B cable:
Download the usb console driver 3.1
Install the x64 version on your PC (as administrator)
After the installation was completed:
Open the Device Manager. There will be a new entry named “CiscoUsbConsoleWindowsDrive”. Expand it and select the “Cisco USB to Serial adaptor”.
From the drop-down select “Update Driver Software…
In the “Update Drive Software” dialog select “Browse my computer for driver software”
In the next window, a driver location should be displayed, if not browse your PC and find the …\Windows_64 folder where you have extracted the 3.1 driver.
After the driver software was updated, there should be a new entry in the “Ports (COM &LPT)” named “Cisco Serial (COMx)”.
You can configure the port here:
Right click on the “Cisco Serial (COMx)” and select “properties” and set the properties to this;
Bits per second :9600
Data bits              :8
Parity                    :None
Stop bits              :1
Flow control       :None
The new COM port should be ready to accept the connection with the router.
I am using Tera Terms VT, and it is working well with the above driver and settings.
Should you wont to use the Cisco Configuration Professional (CCP) download the 2.7 version and make shore you have the current Adobe Flush and a current Java installed on you PC.
Hope this will help.
AlexS

Problem with Universal Dock

Hi everyone!
I was wondering if any of you guys have had problems with volume adjustment with video iPod when attached to the new dock and stereo. In most cases I have to crank the volume almost to end, but not the all way, because then the sound only comes out of the headphones. As I said, this happens in almost every song. On other the songs - I've found only few - I can't adjust the volume, which I find more pleasing. So I would like to know, is there any way to change those preferences on the iPod, or with some other method?
In case its needed, my iPods firmware is 1.0, which I wouldn't like uprage because of the backlight timer.
Thanks in advance!
PC Windows XP

Also have this very frustrating problem. Completely fine playing audio out through iPod touch 2nd Gen with 4.0 update connected to universal dock. Now after the iOS 4.0.2 update, no audio from speakers when I connect to universal dock (headphones and internal speaker work fine), the volume slider disappears when I connect the iPod to the dock and the TuneIn Radio app says "No Volume Available". Hardware volume buttons and apple remote have no effect.
Resetted settings, downgraded back to iOS 4.0.1, restored to factory nothing seems to work. Strangely enough, tried connecting a friend's 2nd Gen ipod touch which hasn't been updated to ios 4.0 (it has 3.1.3) and the same thing: volume slide goes away when connected to dock, and no audio out from speakers. Speakers are good, tested them separately.
Could it be that the ios 4.0.2 update screwed up the universal dock firmware?

Audio/Firewire Problems with Mini, Please Help!

I just bought a brand new Mini from Amazon.com and am having some problems. First, when I plug computer speakers into the mini, the sound continues to come from the internal speaker and the mini ignores the speakers. In System Preferences, it doesn't even recognize that something is plugged into the machine.
Second, the Mini does not recognize my external, Firewire iSight camera. In System Profiler, it does not show anything connected to the port when the camera is connected.
The Mini is the latest rev running 10.4.11. Leopard upgrade disks should be in the mail soon.
Any ideas as to what is wrong? Should I just return to Amazon for a replacement? Thanks for your help!

Having just posted in a similar situation, pardon the cut and paste, but these are the first two (and easiest) things to try:
First reset parameter RAM - it's an area of non-volatile memory used for system settings and hardware configuration. It it gets corrupted, it can cause odd problems.
Reset PRAM
-Shut down the computer.
-Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in the next step but one.
-Turn on the computer.
-Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
-Hold the keys down until the computer restarts and you hear the startup sound for the second time.
-Release the keys.
Next, perform an SMC reset. The SMC is the device which controls system hardware and devices, so if there is a problem with hardware components not functioning, it could be that.
To reset the SMC on an Intel mini:
-From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
-Unplug all cables from the computer, including the power cord and any display cables.
-Wait at least 15 seconds.
-Plug the power cord back in, making sure the power button is not being pressed at the time.
-Then reconnect your keyboard and mouse to the computer.
-Press the power button on the back to start up your computer.

W530 with Mini Dock 433830U

Just ordered a mini dock P/N 433830U. It comes with a eSATA port.
Will that eSATA port work when I dock W530 on it?
Thanks
Solved!
Go to Solution.

Hi again, arthurcorrell
SSDee and lead_org are correct. My apologies for my earlier answer.
Best,
Adam
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution!" This will help the rest of the community with similar issues identify the verified solution and benefit from it.

Icon bounce notification problem with hidden dock

Hi: I think this has been reported on macosxhints for the mail app, but I'm seeing it in other applications too. Specifically, I have Adium setup to notify me via a bouncing dock icon on new messages. I also have a hidden dock.
I've noticed that on new messages, initially the dock icon bounce will be visible. But if I mouse over the dock area to unhide + hide the dock, the bouncing will no longer be visible (it is still bouncing, and I can unhide the dock to confirm - just not visible when the dock is hidden anymore). If I click on the dock icon to check my message, any subsequent messages from Adium result in the dock icon bounce not being visible with the dock hidden. Once again, it is bouncing, just not visible.
As described in http://www.macosxhints.com/article.php?story=20090330170041769, there are certain ways to avoid this, or even to recover from this, but I end up missing my IMs pretty often.
Any ideas? Thanks!

Thank you Barry. I wonder if anyone else has the answer to that question. I have many different view options for different folders, and it would be a pain to have to reset each one of them.

If there is a problem with the wifi for i pod touch or i phone like i have read just like the problem with mine wilix for this problem l there be a f

i pod touch wifi works for few minutes then goes off seems lots of people having same problemsif it is a problem with latest software updates apple should put this right.
how can i find out if it is something to do with software or it is problem with i pod touch 1stg if it is software problem apple need to fix it or give me some money back.
i have wrote about this before and some people have e mailed me over this but i can not mail them back because when i e mail them i get pop 3 failier
any got anyinfo about this or any fix it updates coming
thanks slobber

Do the filenames contain special characters, like "ä,ü,..." or white space or are the vry long? Is there anything special about the image format? Try to export the edited versions in that case and reimport it with a different, shorter filename.
For testing, create a new book with only the images you want to check.
If this does not fix it, try rebuilding. Depress the option and command keys, launch iPhoto and rebuild the library.

Problem with all docks (SOLVED)

Hi there
i have a problem with docky and AWN
first of all I can not run the dicky and get this error
[eman@eMan-PC ~]$ docky
[Info 14:21:38.484] Docky version: 2.1.3 Release
[Info 14:21:38.507] Kernel version: 2.6.39.0
[Info 14:21:38.508] CLR version: 2.0.50727.1433
Unhandled Exception: System.TypeInitializationException: An exception was thrown by the type initializer for Docky.Services.DockServices ---> System.TypeLoadException: A type load exception has occurred.
at Docky.Services.SystemService..ctor () [0x00000] in <filename unknown>:0
at Docky.Services.DockServices..cctor () [0x00000] in <filename unknown>:0
--- End of inner exception stack trace ---
at Docky.UserArgs.Parse (System.String[] args) [0x00000] in <filename unknown>:0
at Docky.Docky.Main (System.String[] args) [0x00000] in <filename unknown>:0
[eman@eMan-PC ~]$
I can run the AWN but can't go to preferences and get this error
** (awn-applet:17489): CRITICAL **: file default/libdesktop-agnostic/desktop-entry-impl-gio.c: line 695: uncaught error: Invalid key name: Path[$e] (g-key-file-error-quark, 1)
** Message: pygobject_register_sinkfunc is deprecated (AwnOverlay)
/home/eman/.gtkrc-2.0:3: error: unexpected character `\342', expected string constant
/usr/bin/awn-settings:1064: GtkWarning: Failed to get constuct only property adjustment of monitor_align_hscale with value `adjustment1'
self.wTree.add_from_file(self.XML_PATH)
Traceback (most recent call last):
File "/usr/bin/awn-settings", line 1223, in <module>
awnmanager = awnManagerMini()
File "/usr/bin/awn-settings", line 1072, in _init_
self.createMainMenu()
File "/usr/bin/awn-settings", line 1137, in createMainMenu
self.safe_load_icon('gtk-execute', size, gtk.ICON_LOOKUP_USE_BUILTIN),
File "/usr/share/avant-window-navigator/awn-settings/awnClass.py", line 1044, in safe_load_icon
icon = self.theme.load_icon('gtk-missing-image', size, flags)
glib.GError: Icon 'gtk-missing-image' not present in theme
any one could help me please?
Forgive my poor English
Last edited by eMan (2011-07-31 11:19:07)

Thanks for respond
it drives me crazy
this is my .gtkrc-2.0
GNU nano 2.2.6 File: .gtkrc-2.0
include "/usr/share/themes/kde44-oxygen-molecule/gtk-2.0/gtkrc"
style “Sans Serif 9″
widget_class “*” style “Sans Serif 9″
gtk-theme-name=”kde44-oxygen-molecule”
gtk-font-name=”DejaVu Sans 12″
I am a real newbie
please help me in simple way

Problems with mini dock

Similar Messages

Maybe you are looking for