Problems with ML when trying to get online using a manual IP
Hi there!
We discovered this today:
We had to install 2 mac minis at a customer. One of them is a Mini Server. The "normal" one got into the companys Ethernet Network using DHCP. This one worked nearly flawless (except for the usual ML bugs).
But the Server-Mini had to have a static IP. In the Network Pref Pane in the "Configure IPv4" i chose "Manually" and put in all the numbers the companys IT-Guys gave me.
There the problems began: I wasnt able to get this Mini online! Some sort of afp-connection from the other Mini was possible but very slow (i think this connection worked directly).
The IP-Guy i was workin with had no clue what is wrong so was i.
So far so good - we decided to do some research (this one here is one of my attempts...).
At home i took my good 'ol 3.1 8-core Mac Pro (which really likes ML ) and did nothing other than change my Macs Network setting from "DHCP" to "Manually" typing in the same numbers (and trying many more numbers afterwards) it got from the Router using DHCP.
Guess what happend...
Yepp - Network connection got dead!!
Doing the same thing with my wifes MacBook Pro (10.6.8), my Mac Mini (10.6.8) my Doughters iMac (PPC 10.4) and my others doughters PowerBook G4 (10.5.8) showed nothing. Network simply went on - no disconnect!
So what is wrong? I cant believe Apple isnt able to handle such a basic thing like fixed IP-Numbers!
Greetings
J. Kellner
Hi again!
Combination with Manual IP and open DNS Servers works with my Mac Pro.
But there at this company they have their own DNS-Servers. That is where ML doesnt work. But old Leopard and SL.
Maybe Apple simply forgot that there are still some closed environments out there...
Best wishes
J.Kellner
Similar Messages
-
Problems with hyperlink when converting .docx to .pdf using Word 2010
I have a Word 2010 .docx document that has a link to a web site in it. The link works fine in Word, but does not work after the conversion to PDF. I am using the Acrobat add on in Word to create the PDF.
There is a pound sign ( # ) in the Word doc hyperlink and it is being changed to a percent sign ( % ) during the conversion to PDF. Any suggestions?I will report the bug. I had read about some other problems with .docx files so I saved the .docx to .doc and then converted but I got the same results.
Thanks for the feedback. -
Problem with XSU when trying to execute pl/sql package returning ref cursor
Hi,
I'm exploring xsu with 8i database.
I tried running sample program which I took from oracle
documentation. Here is the details of these.
------create package returning ref cursor---
CREATE OR REPLACE package testRef is
Type empRef IS REF CURSOR;
function testRefCur return empRef;
End;
CREATE OR REPLACE package body testRef is
function testRefCur RETURN empREF is
a empREF;
begin
OPEN a FOR select * from emp;
return a;
end;
end;
---------package successfully created-----
Now I use java program to generate xml data from ref cursor
------------java program ----------
import org.w3c.dom.*;
import oracle.xml.parser.v2.*;
import java.sql.*;
import oracle.jdbc.driver.*;
import oracle.xml.sql.query.OracleXMLQuery;
import java.io.*;
public class REFCURt
public static void main(String[] argv)
throws SQLException
String str = null;
Connection conn = getConnection("scott","tiger"); //
create connection
// Create a ResultSet object by calling the PL/SQL function
CallableStatement stmt =
conn.prepareCall("begin ? := testRef.testRefCur();
end;");
stmt.registerOutParameter(1,OracleTypes.CURSOR); // set
the define type
stmt.execute(); // Execute the statement.
ResultSet rset = (ResultSet)stmt.getObject(1); // Get the
ResultSet
OracleXMLQuery qry = new OracleXMLQuery(conn,rset); //
prepare Query class
try
qry.setRaiseNoRowsException(true);
qry.setRaiseException(true);
qry.keepCursorState(true); // set options (keep the
cursor alive..
System.out.println("..before printing...");
while ((str = qry.getXMLString())!= null)
System.out.println(str);
catch(oracle.xml.sql.OracleXMLSQLNoRowsException ex)
System.out.println(" END OF OUTPUT ");
qry.close(); // close the query..!
// qry.close(); // close the query..!
// Note since we supplied the statement and resultset,
closing the
// OracleXMLquery instance will not close these. We would
need to
// explicitly close this ourselves..!
stmt.close();
conn.close();
// Get the connection given the user name and password..!
private static Connection getConnection(String user, String
passwd)
throws SQLException
DriverManager.registerDriver(new
oracle.jdbc.driver.OracleDriver());
Connection conn = DriverManager.getConnection
("jdbc:oracle:thin:@xxxx:1521:yyyy",user,passwd);
return conn;
when I ran the program after successful compilation,I got the
following error
==========
Exception in thread "main" oracle.xml.sql.OracleXMLSQLException:
1
at oracle.xml.sql.core.OracleXMLConvert.getXML(Compiled
Code)
at oracle.xml.sql.query.OracleXMLQuery.getXMLString
(OracleXMLQuery.java:263)
at oracle.xml.sql.query.OracleXMLQuery.getXMLString
(OracleXMLQuery.java:217)
at oracle.xml.sql.query.OracleXMLQuery.getXMLString
(OracleXMLQuery.java:194)
at REFCURt.main(Compiled Code)
============================
Can anybody tell me why I'm getting this error.Am I missing any
settings?
thanksWe are using 8.1.7 Oracle db with latest xdk loaded.
am I missing any settings? -
I'm getting error 500 message sometime when trying to get Online bank site. (most times) Can get local bank site which is also secure site. I can access the online bank site using IE 8 on the same computer. How can I fix this?
Which security software (firewall) do you have?
Did you check the settings for Firefox ? -
Get error 500 message trying to get online bank site. What to do?
When trying to get online bank web address, I get a screen which reads "error 500". I can get the site using Internet Explorer but I prefer to use Mozilla Firefox because this is the one I usually use. How do I correct this issue.
Thanks
Bill RobertsWhich security software (firewall) do you have?
Did you check the settings for Firefox ? -
Sorry the answer to my previous question did not help....when trying to get new app installed on iPad message tells me I do not have acc or its been disabled. Is this because of joint usage of email as my partner has account with iTunes using same email?
Whatever the reasons are that you think the problem exists, you will not be able to resolve it on your own. Did you see this at the bottom of the support article that I suggested that you read?
Additional Information
If the issue persists, you can visit iCloud Support, iTunes Support, Apple Print Products, or contact AppleCare for further assistance.
You should probably contact iTunes Support. -
I keep getting ' user not register for online ' when trying to get track names for my CD imports for Windows 7 and I'm unable to find a solution.
I can't be certain exactly which steps are going to be needed in each case, but if you work through this in sequence hopefully one of the steps will prove effective.
First try this:
With iTunes closed.
Press the WinLogoKey+R
Type in %appdata% and press return
Double click on Apple Computer
Double click on iTunes
Delete the file CD Info.cidb
Start iTunes and try again.
If that doesn't work close iTunes and try deleting com.apple.iTunes.Gracenote.plist in the same folder.
If that doesn't work close iTunes and try deleting iTunesPrefs.xml. This will reset your some of your preferences in iTunes so be sure to check them and reset as required.
If that still hasn't resolved things close iTunes and try deleting the entire %appdata%\Apple Computer folder or look for parallel files/folders in the C:\Users\<User>\AppData\Local or C:\Users\<User>\AppData\LocalLow in case a corrupt file is persisting there.
Note that any iOS device backups are stored in the MobileSync folder within Apple Computer. Once things are working you should backup your devices again as soon as possible.
Or it might not be the preference files after all...
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2 -
i've been getting an error when trying to play online games saying that i need to have the browser in 32 - bit mode. my browser is in 32 - bit mode but the msg keeps coming up and not running the game
I dunno, that doesn't make any sense to me.
I just shut down and rebooted into the SnowLeopard partition and took a peek at the preference panes. There are only 3 that run in 32 bit only. They are all 3rd party, and none of the prefpanes are non Intel. Like I said, I have never owned a PPC machine. Anyhow, SnowLeopard doesn't even have an iCloud prefpane, or a combined mail, contacts, and calenders prefpane, and the ML security and privacy prefpane is all new as well. The software update prefpane is Intel and 64 bit in both SnowLeopard and Lion.
As to the triple boot, unless I'm totally mistaken, what I have here is, in essence, 3 seperate descrete computers in one box. All using the same hardware. but one at a time. I wouldn't know how to get more than one running at the same time, without using a virtual machine, even if I wanted to. (Which I don't) I do sometimes transfer files from one to another using the shared folder, but other than that, they do not interact. How could ML system preferences be trying to launch prefpanes from a totally different machine? -
Hi, recently purchased macbook 13", I have problem with sound when connect to my LG Smart tv with sound system. When i change sounds effect on my sound system also LG its all go quiet didn't have this problem with my laptop. Any advise ?
Some progess I see. To be honest, i would not waste your time with trying to connect using wireless.
You are likely to get poor connections and dropping out.
If its working using a cable, then there is no need to bother with giving me the network settings, bu see how it goes, because sometimes giving the TV a static IP address can give better results.
There is an example of a couple of powerline adapters on the diagram below. Just ignore the network switch unless you want to connect other devices which are near to the TV.
http://forumhelp.dyndns.info/networking/powerline3.jpg
I will monitor the subject line of this thread, should you want to post any more information.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
Strange problem with SQLPLUS when client and server on the same box
Hi,
I have the problem with SQLPLUS when clinet and server on the same machine.
With client and server on the same machine i am running the command
sqlplus -l username/password@connect_identifier as SYSDBA.
With this command, even if you pass in wrong username or wrong password or both as wrong you can able to connect to database and execute queries.
Once Connect_identifier is correct and trying to log in as SYSDBA ,sqlplus will log in to DB with any username and password.
How to get rid of this behaviour. Is there any way to do this.
I am running this command by creating a process in C#
Edited by: user11000236 on Jun 16, 2009 10:31 AMuser11000236 wrote:
Thanks for the info.
How does Oracle/SQLPLUS allows any username or password to log in to DB with SYSDBA Privillages? What is the concept behind this.?
This is explainted in the above mentioned link:
Operating system authentication takes precedence over password file authentication. If you meet the requirements for operating system authentication, then even if you use a password file, you will be authenticated by operating system authentication. -
Getting a verification error when trying to get into the apps,
I also have Jolly's problem. I found the iMovie 9.0.9 folder and tried to launch the older version of iMove. It would not launch. I removed all of the iMovie preferences from the Preferences folder, removed iMove 10 from the applications folder, and restarted my Mac. iMove 9.0.9 still won't launch and I can't access my videos created with the older version of iMovie. Is there a way to uninstall iMovie 10 and reinstall iMovie 9.0.9?
I am running Yosemitie on a iMac.
Paul -
i have a problem with installing PS13 as I get an error message "This installer does not support installation on a 64-Bit Windows operating system. Please download the 64-Bit version of Photoshop Elements." how do i do this
Try downloading the trial. It ought to detect that you have a 64-bit system.
You aren't using Vista, are you? PSE 13 requires at least win 7 and I think a few folks with vista have gotten a similar error message on trying to install it. -
Problem with SDO_relate when using polygons with holes.
I'm having a problem with sdo_relate. I'm trying to extract all elements from a point table (bdtq_batim_p) that are inside a specific polygon from another table (SDA_MUNIC_SS). The spatial index for both table have been rebuilt and the data from both table is valid.
When I do a count on the query, I know the answer should be 1422 elements (Counted in ArcGIS). However, sdo_relate gives a smaller number of elements in the result set.
The query :
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and sdo_relate( t.SHAPE,s.SHAPE,'mask=anyinteract querytype=window') = 'TRUE'
returns 282 elements. The query with mask=inside, SDO_Anyinteract() and SDO_inside() all give the same result.
I did a test with the following query and the result is 1422 (which is the good result).
SELECT count(distinct t.identifiant) FROM bdtq_batim_p t, SDA_MUNIC_SS s WHERE s.mus_co_geo = '48015' and SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE';
It's important to note that the polygone (from SDA_MUNIC_SS) that is used for this query have holes in it. I have the same problem with all the polygons from the SDA_MUNIC_SS table that have holes in it. For the polygon without holes, the results are the same for the 2 queries.
My question are :
Why are the result from the two queries different? A query with a buffer of 0 should always return the same result as a query with Anyinteract.
Is there a known problem with SDO_RELATE when using a polygon with holes in it?
Do you have any idea how to solve my problem.Since i don't have much control on the version of Oracle and Patches that we use in the system, we used a workaround that detects the polygons with holes and uses the SDO_WITHIN_DISTANCE( t.SHAPE,s.SHAPE,'distance=0') = 'TRUE' operator in those case. We saw a slight decline in performance but it now returns the right results. When the system will be patched, we'll come back to the original version and see if the problem is solved.
-
When trying to get new messages, keep getting asked for password and then get "operation couldn't be completed. (MFMessager error domain error 1032)-Why?
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
Cheers, Tom -
I am running Lion 10.7.2 and I have an external drive hooked to my time machine. I can't rename folders and when trying, I get an error code 8076. The checkbox "ignore permissions for this device" does not show on volume info. Help please???
The TIme Machine volume does not have that checkbox.
I think the issue is with your Finder...
Go to Finder "Go" menu hold the option key and choose Library. Then go to Preferences trash these files:
com.apple.finder.plist
com.apple.sidebarlists.plist
Then, restart, or log out and in again.
(You will have to reset a few finder prefs the way you like them.)
Maybe you are looking for
-
I still can't get into my verizon
I need to get my 5 land lines, but now my account locked me out... I haven't ever set one up. When I go to register, it says my phone is registered. When I put in my billing addy and soc it says they are incorrect??? I can't find a password. It is st
-
Finder Won't Launch - Can't Boot From CD's
Gahhh! I've been trying for two days now to upgrade to 10.4, but I kept getting errors, when you get to the actual installing part. The computer has 256k of original RAM, but as per the help topic, I figured it could be a RAM issue (you need at least
-
Exit to populate Vendor Batch field in Material tab while creating PO.
Hi Experts, I need an exit to populate Vendor Batch field in Material tab while creating Purchase Order. Regards, Jayapal. Message was edited by: Jayapal
-
Large XML files, how to split and read them in PI
Hi, For a specific requirement, we have a 60 MB-90 MB XML file being generated by a legacy application. This file has to be processed by PI 7.31 Sender File Adapter and should be posted as a ABAP proxy to SAP ECC system. To address any performance is
-
Preview mode doesn't display correctly
Lately I have had many problems in preview mode. I had to restart the program to see preview mode correctly. I waste time (on restart, then run the program, and test again the preview mode) each time is not doing correctly. It will be great if someon