Problems with mouse and showing time
Hi,
I wish you can help me how to use the mouse as I have an
audio and need tje mouse pointer to point at an image
simultaneously with the audio voice?
Also I need to show the time (digital time like a clock 1:22
minutes) simulateanously with the project movie? which starts and
ends with the audio file ?
Thanks
Hi furrey
oo time show that would create the audio to make an
application in flash for that, do not understand very well the
first part, the pointer work simultaneously with the audio that
Similar Messages
-
Problem with DAQmx and Real Time PCI-7041/6040E.
Problem with DAQmx and Real Time PCI-7041/6040E.
I have a problem with the Real Time card PCI-7041/6040E, I think it is properly installed because my software run with the traditional NI-DAQ. When I try to use the new DAQmx to acquire one signal, Labview doesn't see any device for de DAQ card 6040E.
Information, I work on Windows XP and LabView v7.0.0 (NIDAQ RT v7.0.0, NI-Serial RT v2.5.2, NI-VISA v3.0.1 and NI-Watchdog v2.0.0).
Could Labview RT run with new DAQmx ?
What can I do to use DAQmx with PCI-7041/6040E?
Thanks for your help !Hello,
I refer to your posts because i am using the PCI 7041/6040E card as
well but without any success to make it work. The problem I have
already described in the following thread:
http://forums.ni.com/ni/board/message?board.id=170&message.id=120198
Would be nice if you had a look on it, maybe you can help me. BTW, the
thread starts with a problem of someone else, the difficulties I
encountered are to be found a little bit to the bottom of the thread's
page.
Thank you!
Dirk Völlger
Darmstadt
Message Edited by ratschnowski on 07-28-2005 07:14 AM -
Problem with exposé and showing desktop
It never happened with Leopard, but since the upgrade, sometimes Exposé has some kind of problem. The problem is that sometimes, if I drag four fingers down to show expose, when I drag four fingers up to go back to its previous state, it doesn't want to go back to the full size view and bounces back to the expose view.
The only way to get out is by dragging the four fingers in the same direction I did to get in there. It's not a big deal, but sometimes is a waste of time because I drag down to get in, drag up to get out, doesn't want to and then I have to drag down as I did at the beginning. It's totally random and sometimes it also happens when showing the desktop.
Is it a known problem or is it just me?Good to know that I'm not the only one. I hope there will be an update soon.
-
Problem with mouse and speaker icon
When I move the curser around a page, a semi transparent speaker icon often shows up with a faint sound then slowly fades out. It sometimes momentarily freezes the screen until the sound icon is gone, as if the system had suddenly run short of memory. What can this be due to ?
Power Mac G4 Cube Mac OS X (10.3.9)The cable seems to be fine. Actually I tried the mouse in the other port and in another computer and I have no problem at all.
I have to plug it in the left side because I am lefty.
But... the same thing happens with my powerbook (and the MBP). This behavior started after I upgraded to 10.4.5 -
I am having awful problems with mouse and trackpad after installing Lion
I have tried 3 different brands of mice and it happens with each one. the mouse clicks and sticks spontaniously and wont let go and hitting esc or trying to click somewhere else doesn't have any effect - it wont let go. And it doesn't seem to matter which program. At forst i thought it was just pwer point but it still happens if I command/tab over to mail or finder. and then I get the stupid wheel of death. power point (or whatever program I'm in) locks up. and then I lose recent edits.
I have a Mac book pro. I have use and external keyboard and monitor when I'm at my office.
When the problem has happened I have tried using the trackpad - but it's like it's dead. No click effect. No help!
I AM REALLY TRYING TO NOT GET ANGRY - BUT I AM READY TO SCRAP LION!!!!!!!!!!!
HELP!!!!!!!!Thanks for the tip re MagicPrefs! Great app!
Is anyone having trouble with Mac losing the connection to Magic Mouse after the Mac goes to sleep? I am running Mac Mini late 2009 with dual-core 2.0 GHz and 4 GB RAM. Never had any issues under Snow Leopard, only after the upgrade to Lion. Battery is OK (tried fresh ones with no luck).
Turning the mouse off then on does not help, but ocasionally I have been able to get the mouse back by simply using Command+Tab. It does not seem to matter which app is active. -
Problems with Graphics and a Timer...
Alright so what I'm trying to do is when my character attacks (after the user pushes the ctrl button) I want the attack sprite to show, along with a simple slash graphic, then after less than a second I want the graphic gone and the sprite to return to standing mode. the problem is that it doesn't return, it just stays with the graphic and the attack sprite until the user moves.
here's the attack sub
public void attack(){
at=true;
udchar(3,"attack1");
sleep(300);
repaint();
}here's my sleep sub
public void sleep(long l){
try{
Thread.sleep(l);
catch(InterruptedException e){
return;
}and here's my paint sub
public void paint(Graphics g){
bufferGraphics.drawImage(background,0,0,10000,600,this);
bufferGraphics.drawImage(sidebar,720,0,200,600,this);
bufferGraphics.drawImage(chara,px,py,128,128,this);
bufferGraphics.drawImage(sworda,px,py,128,128,this);
bufferGraphics.drawImage(hi,6,507,96,96,this);
bufferGraphics.drawImage(li,200,507,96,96,this);
bufferGraphics.drawImage(mi,394,507,96,96,this);
if(at==true){
if(dir.equals("right"))
bufferGraphics.drawImage(slice,px+100,py+20,128,128,this);
else
bufferGraphics.drawImage(slice,px-100,py+20,128,128,this);
at=false;
g.drawImage(offscreen,0,0,this);
}Help would be much appreciated. I'm not sure if I need to include any other parts of my code or not. If I do just let me know and I'll post that part of the code when I get home from work. Thanks in advance.There are a variety of Graphics forums that can provide the specialized help you need though, such as Java2d and Java3d, about 1/3 of the way down the forum list.
-
Problem with DateDiff and Date/Time value.
The form below displayed perfectly until I added the line for DateDiff between VacStart and VacEnd. I receive an error message;
An error occurred while evaluating the expression:
#DateDiff("w", "VacStart", "VacEnd")#
Error near line 48, column 51.
Parameter 2 of function DateDiff which is now "VacStart" must be a date/time value
The error occurred while processing an element with a general identifier of (#DateDiff("w", "VacStart", "VacEnd")#), occupying document position (48:50) to (48:86).
I have tried changing the DB value to Date/Time as well as Text and get the same result each time. Any help would be greatly appreciated. Here is my code:
<cfquery datasource="manna_premier" name="TM_log">
SELECT *
FROM TMStatusLog
</cfquery>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>TM Status Log</title>
</head>
<body>
<p align="center" class="style4">Territory Manager Status Log </p>
<table width="1448" border="0">
<tr>
<th width="71"><span class="style3">ID No.#</span></th>
<th width="88"><span class="style3"> Date</span></th>
<th width="166"><span class="style3">TM Name</span></th>
<th width="129"><span class="style3">Status</span></th>
<th width="139"><span class="style3">Vac Start </span></th>
<th width="137"><span class="style3">Vac End</span></th>
<th width="203">Ttl Days </th>
<th width="203"><span class="style3">DSR Ride Along Name</span></th>
<th width="274"><span class="style3">Service Call Name</span></th>
</tr><cfoutput query="TM_log">
<tr>
<td><span class="style3">#ID#</span></td>
<td><div align="center"><span class="style3">#DateFormat(LogDate, "mm/dd/yyyy")#</span></div></td>
<td><div align="center"><span class="style3">#TerritoryManager#</span></div></td>
<td><div align="center"><span class="style3">#Status#</span></div></td>
<td><div align="center"><span class="style3">#DateFormat(VacStart, "mm/dd/yyyy")#</span></div></td>
<td><div align="center"><span class="style3">#DateFormat(VacEnd, "mm/dd/yyyy")#</span></div></td>
<cfif VacStart IS NOT "Null">
<td><div align="center"><span class="style3">#DateDiff("w", "VacStart", "VacEnd")#</span></div></td>
</cfif>
<td><div align="center"><span class="style3">#DSRName#</span></div></td>
<td><div align="center"><span class="style3">#ServiceName#</span></div></td>
</tr></cfoutput>
</table>
</body>
</html>Error Diagnostic Information
An error occurred while evaluating the expression:
#DateDiff("w", VacStart, VacEnd)#
Error near line 47, column 48.
Parameter 2 of function DateDiff which is now "" must be a date/time value
The error occurred while processing an element with a general identifier of (#DateDiff("w", VacStart, VacEnd)#), occupying document position (47:47) to (47:79).
Any other suggestions? Thanks!
Well... what does the error message say?
Parameter 2 of function DateDiff which is now "" must be a date/time value
What does this tell you? What is parameter 2 of that function call? It's VacStart. So it's saying VacStart is an empty string, and it's saying an empty string is not a valid value for that parameter.
So the question you need to ask yourself is whether you expect VacStart to be an empty string? Or do you perhaps expect it to be a date? I would guess you're expecting it to be a date. So the question becomes... Why is VacStart an empty string?
Adam -
I'm having problems with iPhoto and the facebook set-up. Every time I attempt to do so it says an error has occured and try again later. I have not seen a solution posted. Therefore, how does one contact Apple to solve the problem? I'm new to the world of iMac but I find it a bit frustrating trying to solve basic issues/problems:(
For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa -
hello am using ios 7.0.4 I have a question about messages that it does not show the time of a particular message after first message that I recive form a paricular person so please in the next version change this and with every message show time and date
Hi,
How is everything going? Have you checked this issue from OWA? If so, please let me know the result.
In adition, please also try to use the following powershell commands to check if the assistant has right permissions:
Get-MailboxFolderPermission -Identity
CEO’s email address:\Calendar -User assistant’s email address
Also check with:
Get-Mailbox -Identity CEO’s mailbox
| fl *GrantSendOnBehalfTo
Please let me know the result.
Best Regards,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Today, I experienced a problem with my mail. the time and date on each email received and sent is 18.06 and date as 22nd July. Thank you John
Incorrect date or time displayed in various applications
-
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome
Problem with jquery slide show conflict with vertical navigation menu in Firefox & Chrome. Works in IE. This is my first time trying to post a question - so please be kind. I am also not good with code and am finding css a real challenge after learning to design based on tables. I'm using CS5.
The "test" page with the slide show is: http://www.reardanwa.com/index-slides.html The same page without the slide show is http://www.reardanwa.com/
I realize the images are not ideally sized - I'll fix those once I get the pages to function. Maybe I need a different slide show? I would prefer a widget that I can modify to required size & postition. Again - I'm not good at building with code from scratch.
The problem is the naviagation links that are directly next to the slide show do not work in Firefox of Chrome. They do work in IE.
I've read about using jQuery.noConflict(); code but can't figure out the correct way to use it in my case or whether that's even part of the solution. I know my code is not well organized as I have cobbled together from various sources in an attempt to format the page the way the client wants it. Also, FYI, I will eventually try to make the page work in Surreal CMS.
I've spent sevaral days over the last several weeks trying to solve sth slide show/navigation conflict - so any specific light you can shed will be much appreciated.
Thanks in advance.
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Reardan Area Chamber of Commerce</title>
<meta name="description" content="home page for Reardan Area Chamber of Commerce" />
<meta name="keywords" content="Reardan WA, chamber of commerce" </>
<script src="scripts/jquery-1.6.min.js" type="text/javascript"></script>
<script src="scripts/jquery.cycle.all.js" type="text/javascript"> </script>
<script type="text/xml">
</script>
<style type="text/css">
#slideshow {
padding: 10px;
margin:0;
#slideshow-caption{
padding:0;
margin:0;
#slideshow img, #slideshow div {
padding: 10px;
background-color: #EEE;
margin: 0;
body {
font: 100%/1.4 Verdana, Arial, Helvetica, sans-serif;
background: #004B8D;
margin: 0;
padding: 0;
color: #000;
/* ~~ Element/tag selectors ~~ */
ul, ol, dl { /* Due to variations between browsers, it's best practices to zero padding and margin on lists. For consistency, you can either specify the amounts you want here, or on the list items (LI, DT, DD) they contain. Remember that what you do here will cascade to the .nav list unless you write a more specific selector. */
padding: 0;
margin: 0;
h1, h2, h3, h4, h5, h6, p {
margin-top: 0; /* removing the top margin gets around an issue where margins can escape from their containing div. The remaining bottom margin will hold it away from any elements that follow. */
/* adding the padding to the sides of the elements within the divs, instead of the divs themselves, gets rid of any box model math. A nested div with side padding can also be used as an alternate method. */
.left
position:absolute;
left:0px;
.center
margin:auto;
width:95%;
.box
position:relative;
left:-90px;
width:950px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
z-index:1000;
.slide{
position:absolute;
a img { /* this selector removes the default blue border displayed in some browsers around an image when it is surrounded by a link */
border: none;
/* ~~ Styling for your site's links must remain in this order - including the group of selectors that create the hover effect. ~~ */
a:link {
color: #42413C;
text-decoration: underline; /* unless you style your links to look extremely unique, it's best to provide underlines for quick visual identification */
a:visited {
color: #6E6C64;
text-decoration: underline;
a:hover, a:active, a:focus { /* this group of selectors will give a keyboard navigator the same hover experience as the person using a mouse. */
text-decoration: none;
/* ~~this fixed width container surrounds the other divs~~ */
.container {
width: 960px;
min-height:900px;
padding:5px 0px 0px 0px;
background: #E8F8FF;
margin: 0 auto; /* the auto value on the sides, coupled with the width, centers the layout */
/* ~~ the header is not given a width. It will extend the full width of your layout. It contains an image placeholder that should be replaced with your own linked logo ~~ */
.header {
background: #E8F8FF;
padding:10px 5px 0px 5px;
.sidebar1 {
float: left;
width: 225px;
margin: 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
z-index:-1;
.sidebar2 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:2;
.sidebar3 {
float: left;
width: 275px;
color: #FFFF0D;
text-align: left;
background: #595FFF;
padding-bottom: 10px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
border: 3px solid #F7F723;
z-index:3;
.content {
padding: 0px 0px 0px 0px;
width: 780px;
float: left;
background: #E8F8FF;
/* ~~ This grouped selector gives the lists in the .content area space ~~ */
.content ul, .content ol {
padding: 0px 15px 5px 10px; /* this padding mirrors the right padding in the headings and paragraph rule above. Padding was placed on the bottom for space between other elements on the lists and on the left to create the indention. These may be adjusted as you wish. */
/* ~~ The navigation list styles (can be removed if you choose to use a premade flyout menu like Spry) ~~ */
ul.nav {
list-style: none; /* this removes the list marker */
border-top: 0px solid #FFFF66; /* this creates the top border for the links - all others are placed using a bottom border on the LI */
margin-bottom: 50px; /* this creates the space between the navigation on the content below */
font: Arial Black, Verdana, , Helvetica, sans-serif;
font-size:1.3em;
font-weight:bold;
z-index:2;
ul.nav li {
border-bottom: 0px solid #FFFF66; /* this creates the button separation */
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
ul.nav a, ul.nav a:visited { /* grouping these selectors makes sure that your links retain their button look even after being visited */
padding: 3px 0px 5px 0px;
display: block; /* this gives the link block properties causing it to fill the whole LI containing it. This causes the entire area to react to a mouse click. */
width: 185px; /*this width makes the entire button clickable for IE6. If you don't need to support IE6, it can be removed. Calculate the proper width by subtracting the padding on this link from the width of your sidebar container. */
text-decoration: none;
color: #FFFF0D;
background: #595FFF;
ul.nav a:hover, ul.nav a:active, ul.nav a:focus { /* this changes the background and text color for both mouse and keyboard navigators */
background: #595FFF;
font: 120%/1.4 Arial Black, Verdana, , Helvetica, sans-serif;
color: #FFFFFF;
/* ~~ The footer ~~ */
.footer {
padding: 10px 0;
background: #595FFF;
color: #FFFF0D;
position: relative;/* this gives IE6 hasLayout to properly clear */
clear: both; /* this clear property forces the .container to understand where the columns end and contain them */
/* ~~ miscellaneous float/clear classes ~~ */
.fltrt { /* this class can be used to float an element right in your page. The floated element must precede the element it should be next to on the page. */
float: right;
margin-left: 8px;
.fltlft { /* this class can be used to float an element left in your page. The floated element must precede the element it should be next to on the page. */
float: left;
margin-right: 8px;
.clearfloat { /* this class can be placed on a <br /> or empty div as the final element following the last floated div (within the #container) if the #footer is removed or taken out of the #container */
clear:both;
height:0;
font-size: 1px;
line-height: 0px;
-->
</style>
</head>
<body>
<div class="container">
<div class="header"><!-- end .header -->
<a href="#"><img src="images/Chamber-Logo-2.gif" alt="Reardan Chamber Logo" width="187" height="163" hspace="10" vspace="5" align="top" /></a><img src="images/Reardan-Chamber-Title.gif" width="476" height="204" alt="Reardan Area Chamber of Commerce, Dedicated to Preserving and Enhancing Area Businesses" /><p></p>
<p style="color: #F00">This Site is under construction! Please pardon our dust as we create!</p>
</div>
<div class="sidebar1">
<ul class="nav">
<li><a href="about.html">About Us</a></li>
<li><a href="history.html">Reardan History</a></li>
<li><a href="activities.html">Activities</a></li>
<li><a href="business.html">Business<br />
Directory</a></li>
<li><a href="about.html">Join the<br />
Chamber</a></li>
<li><a href="links.html">Links<br />
<span style="font-size: 85%">Tourism</span><br />
</a></li>
</ul>
<!-- end .sidebar1 --></div>
<br />
<br />
<br />
<br />
<div class="box" +"slide">
<script type="text/javascript">
// BeginOAWidget_Instance_2559022: #slideshow
slideshowAddCaption=true;
$(window).load(function() {
$('#slideshow').cycle({
after: slideshowOnCycleAfter, //the function that is triggered after each transition
autostop: false, // true to end slideshow after X transitions (where X == slide count)
fx: 'blindX',// name of transition effect
pause: false, // true to enable pause on hover
randomizeEffects: true, // valid when multiple effects are used; true to make the effect sequence random
speed: 100, // speed of the transition (any valid fx speed value)
sync: true, // true if in/out transitions should occur simultaneously
timeout: 5000, // milliseconds between slide transitions (0 to disable auto advance)
fit: true,
height: '300px',
width: '525px' // container width (if the 'fit' option is true, the slides will be set to this width as well)
function slideshowOnCycleAfter() {
if (slideshowAddCaption==true){
$('#slideshow-caption').html(this.title);
// EndOAWidget_Instance_2559022
</script>
<div id="slideshow">
<!--All elements inside this will become slides-->
<img src="images/100_1537.jpeg" width="600" height="450" title="caption for image1" /> <img src="images/Parade-2011-2.jpg" width="300" height="225" title="caption for image2" /> <img src="images/100_1495.jpeg" width="600" height="450" title="caption for image3" />
<div title="sample title"> Images for slide show will need to be re-sized to fit box to avoid distortion</div>
<img src="images/beach4.jpg" width="200" height="200" title="caption for image4" /> <img src="images/beach5.jpg" width="200" height="200" title="caption for image5" /> </div>
<!--It is safe to delete this if captions are disabled-->
<div id="slideshow-caption"></div></div>
<div class="sidebar2" "anotherClass editable"><p align="center"><strong>Chamber News</strong><br />
Local News item
<br />
Another New item</p>
<p align="center">lots of news this week<br />
<br />
<br />
<br />
</p>
</div>
<div class="sidebar3" "anotherClass editable"><p align="center"><strong>Upcoming Events</strong></p>
<div align="center"> <a href="activities.html" style="color: #FFFF0D">Community wide yard sales</a><br />
<br />
<br />
<br />
<br />
</div>
</div>
<div class="content"><br />
<br />
</div>
<div class="footer">
<p align="center"><span style="font-size: small">Reardan Area Chamber of Commerce</span><br />
<span style="font-size: x-small">[email protected] - 509.796.2102</span><br />
</p>
<!-- end .footer -->
</div></body>
</html>If you DO want the slideshow overlaping the navigation try the below css:
.sidebar1 {
float: left;
width: 225px;
margin: 60px 0px 60px 60px;
color: #FFFF0D;
background: #595FFF;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px;
padding: 5px 5px 0px 5px;
border: 3px solid #F7F723;
.box {
float: left;
margin-left:-60px;
width:700px;
height:350px;
border-radius: 13px;
-moz-border-radius: 13px;
-webkit-border-radius: 13px; -
Problem with touchpad and Windows 8.1. Acer Aspire E5-511
I bought an Acer Aspire E5-511, but I have problem with touchpad and Windows 8.1.The touchpad (Synaptics) is not working with Windows 8.1 x64, but it works fine with Windows 7 x64 and Windows 8 x64.When I install Windows 8.1 and have to choose” language to install” I can’t choose anything with the touchpad. I should plug in my mouse to continue. I doesn’t work even when it’s fully installed and with latest driver (available only for win 8.1 x64) from Acer’s website. I tried with an older driver, but had no success. I updated BIOS, but it doesn’t work again. In hardware IDS in device manager it shows HID\… not ACPI\… (like win 7/8). Fn+F7 doesn’t help.When I try to install Windows7/8 the touchpad is working properly at the beginning (I can choose ”language to install”, “Time and currency format”… and the touchpad works after install even without driver).
SOLUTION So guys after deep research and troubleshooting I found that you need to keep notice of a few things at time of installation: Installation Mode: UEFI (only)- LEGACY would create touchpad issues. after installation of windows just follow the driver installation hierarchy 1.Intel NB_Chipset_M Baytrail-M 2.Intel I/O Driver then rest of the crap. Note:After doing all this make sure your touchpad is active >> Fn+F7 Just wished if this solution came from an acer executive , the world would have been a better place , but anyways this is what community is for. Enjoy everyone
-
Problem with JFrame and busy/wait Cursor
Hi -- I'm trying to set a JFrame's cursor to be the busy cursor,
for the duration of some operation (usually just a few seconds).
I can get it to work in some situations, but not others.
Timing does seem to be an issue.
There are thousands of posts on the BugParade, but
in general Sun indicates this is not a bug. I just need
a work-around.
I've written a test program below to demonstrate the problem.
I have the problem on Solaris, running with both J2SE 1.3 and 1.4.
I have not tested on Windows yet.
When you run the following code, three JFrames will be opened,
each with the same 5 buttons. The first "F1" listens to its own
buttons, and works fine. The other two (F2 and F3) listen
to each other's buttons.
The "BUSY" button simply sets the cursor on its listener
to the busy cursor. The "DONE" button sets it to the
default cursor. These work fine.
The "SLEEP" button sets the cursor, sleeps for 3 seconds,
and sets it back. This does not work.
The "INVOKE LATER" button does the same thing,
except is uses invokeLater to sleep and set the
cursor back. This also does not work.
The "DELAY" button sleeps for 3 seconds (giving you
time to move the mouse into the other (listerner's)
window, and then it behaves just like the "SLEEP"
button. This works.
Any ideas would be appreciated, thanks.
-J
import java.awt.BorderLayout;
import java.awt.Cursor;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import javax.swing.JButton;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.SwingUtilities;
public class BusyFrameTest implements ActionListener
private static Cursor busy = Cursor.getPredefinedCursor (Cursor.WAIT_CURSOR);
private static Cursor done = Cursor.getDefaultCursor();
JFrame frame;
JButton[] buttons;
public BusyFrameTest (String title)
frame = new JFrame (title);
buttons = new JButton[5];
buttons[0] = new JButton ("BUSY");
buttons[1] = new JButton ("DONE");
buttons[2] = new JButton ("SLEEP");
buttons[3] = new JButton ("INVOKE LATER");
buttons[4] = new JButton ("DELAY");
JPanel buttonPanel = new JPanel();
for (int i = 0; i < buttons.length; i++)
buttonPanel.add (buttons);
frame.getContentPane().add (buttonPanel);
frame.pack();
frame.setVisible (true);
public void addListeners (ActionListener listener)
for (int i = 0; i < buttons.length; i++)
buttons[i].addActionListener (listener);
public void actionPerformed (ActionEvent e)
System.out.print (frame.getTitle() + ": " + e.getActionCommand());
if (e.getActionCommand().equals ("BUSY"))
frame.setCursor (busy);
else if (e.getActionCommand().equals ("DONE"))
frame.setCursor (done);
else if (e.getActionCommand().equals ("SLEEP"))
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
else if (e.getActionCommand().equals ("INVOKE LATER"))
frame.setCursor (busy);
SwingUtilities.invokeLater (thread);
else if (e.getActionCommand().equals ("DELAY"))
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (busy);
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.print (" finished");
System.out.println();
Runnable thread = new Runnable()
public void run()
try { Thread.sleep (3000); } catch (Exception ex) { }
frame.setCursor (done);
System.out.println (" finished");
public static void main (String[] args)
BusyFrameTest f1 = new BusyFrameTest ("F1");
f1.addListeners (f1);
BusyFrameTest f2 = new BusyFrameTest ("F2");
BusyFrameTest f3 = new BusyFrameTest ("F3");
f2.addListeners (f3); // 2 listens to 3
f3.addListeners (f2); // 3 listens to 2I've had the same problems with cursors and repaints in a swing application, and I was thinking of if I could use invokeLater, but I never got that far with it.
I still believe you would need a thread for the time consuming task, and that invokeLater is something you only need to use in a thread different from the event thread. -
Hi B2B Gurus,
We are facing the problem with ECS and XSD files from past 2 weeks, Steps we followed
1. Created a ECS file in document editor version 11g: 6.6.0
2. ECS files consists only from ST and SE segments
Ex: ST
BCH
CUR
REF
PER -- Exclude
TAX -- Exclude
SE
3: Generated a XSD file from ECS file( File --> export---> Oracle B2B) in document ediotr
4. We imported a ECS and XSD file in B2B console( documents---docdef-transaction set ECS file) and XSD File
5. We tested one file from manually we face below error:
Error Code B2B-51507
Error Description Machine Info: (usmtnz-dinfap19.dev.emrsn.org) Description: Payload validation error.
Error Level ERROR_LEVEL_COLLABORATION
Error Severity ERROR
Error Text
and some times it shows Guideline load Error or simply Error
Please help us to resolve this
RegardsAnuj,
We are sending the EDI XML file from backend, then B2B will convert it into EDI file, How can we analyze EDI XML file with ECS file, B2B is not converting to EDI.
1. Can we use 10g ECS file and XSD file in 11G
2. I tried to import it, but it showing below error while doing testing
App Message property {MSG_ID=90422086, Sequencing=false, DOCTYPE_REVISION=5020, MSG_TYPE=1, FROM_PARTY=EMERSON, DOCTYPE_NAME=850, TO_PARTY=APLL, ATTACHMENT=}
Direction OUTBOUND
State MSG_ERROR
Error Code B2B-51507
Error Text Error Brief : The element does not include any significant data.
Error Description Error : The Element PER02 does not include any significant data characters. Segment PER is defined in the guideline at position 3600.{br}{br}This error was detected at:{br}{tab}Segment Count: 11{br}{tab}Element Count: 2{br}{tab}Characters: 5395 through 5397
Created Date 06/20/2011 02:52 PM
Modified Date 06/20/2011 02:52 PM
Note: I used the same files in 10G its working fine.
Regards
Edited by: Francis on Jun 20, 2011 10:48 AM -
Hi,
I'm running OS 10.11 and am having some consistent problems with Mail and Safari on my MacPro Dual 2.66. Here they are:
Sometimes, for no apparent reason, selecting these applications from the dock no longer opens the application (or a new window if already opened), but causes them to be revealed in the finder.
In Safari, when this problem occurs, another symptom seems to be that new windows will ONLY open in a new tab, even though I have preferences set to open links in a new window. If I click on a bookmark within a folder in the bookmark toolbar, Safari will open ALL the bookmarks in the folder in new tabs!!
In Mail, when I open my Inbox, clicking on various messages will highlight (in blue) ALL the messages I'm clicking on, instead of simply displaying the highlighted message in the reader.
The only way to get things back to normal is to reboot my machine, which is getting to be a total drag, especially since this seems to happen fairly often.
One other thing that may be related- if my screen saver is running, and I move the mouse to go to an active screen, the computer will "freeze." It stays like this indefinitely- I figured out that if I press the button on the machine itself it will go to sleep, and I can wake it up and then everything is fine, but I don't understand what's going on.
I have tried using Disk Utility and Disk Warrior, and have used OnyX to clean out my system cache and aall sorts of other stuff, but to no avail.
Is anybody else experiencing any of this? I'm starting to get really frustrated. Thanks for any advice.
Cheers,
AndrewScott,
I had posted earlier that I had Flash payer problems and then QuickTime and PDF preview problems too, on my Intel PowerMac. I could not figure out what the problem was, because fixing permissions and moving plugins did not work. Console indicated that the Quicktime components were not found, with the problem in a webkit pref file somewhere (nil field value). Anyway, I bailed and reinstalled Leopard from a 10.5.0 DVD, and then updated using the combo updater to 10.5.3. Everything worked. Then, after the 'Java for Mac OSX 10.5 Update 1', it all broke again. This time, repairing permissions resulted in:
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Home/lib/jvm.cfg", should be 0, user is 95.
User differs on "System/Library/Frameworks/JavaVM.framework/Versions/1.4.2/Libraries/classlist" , should be 0, user is 95.
Now it all works again. This is obviously a flaw with the Java update, and also somehow Disk Utility did not find it earlier. Anyway, take a look at reverting the Java update, or manually changing user for those files (I suppose user 0 is root, but maybe it is nobody).
Obscure....
Maybe you are looking for
-
Error while Test Connection with Connector
hi all: there is an error while Test Connection with Connector , I also test it through sys administration->sys configuration-> suport -> sap transaction, I got all errors, I put these two errors as folows, could you please tell me how to sovle
-
Desktop background disappears, Mission Control doesn't work correctly
Sometimes it happens that my desktop background completely dissappears, and Mission Control stops working as well. It seems to happen when I open a new window in a fullscreen app (like Safari), and while it's opening I switch to another space. Whenev
-
When working in a Table can you have it add numbers in a column?
I know it can be done on a spreedsheet, but can it be done in a Table and if yes how?
-
Downloading spreadsheet to iTunes
One of my spreadsheets gives an error message when trying to down load to iTunes as an excel format. Any ideas?
-
INoficatorService implementation not found
Hi all, I need to send a notification mail from my code but i have not been able to get the implementation class for INoficatorService so that i may call its send() method. Could u pls help me on this. regards saurav