Problems with Movie Maker under Parallels.

Hello, I run Windows 7 on my iMAC via Parallells without any problems normally. It works e.g. fine to run the Windows Office programs. But I run into problems when I try to run Windows Movie Maker.
I get the instruction to run dxdiag.exe to verify my DDI-version.
And then I get the following message from Windows:
'"The file prl_umdd.dll is not digitally signed, which means that it has not been tested by Microsoft Windows
Hardware Quality Labs (WHQL). You can maybe get a WHQL-signed file from the hardware supplyer."
Is this a wellknown problem among mac-users who run Windows via Parallels?
Any suggestion what I should do?

You should probably post your question on the Parallels or Windows forum as neither are Apple products and this is not a compatibility issue btween Mac OS and Windows, which is the focus of this forum'
http://windowsforum.com/
http://forums.parallels.com

Similar Messages

Problem with movies imported from iPad3

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

Whenever I import footage into imovie, the footage looks good. When I put that footage into a project it stutters.
It doesnt matter if I specify 24fps or 30fps, the movie judders and stutters.
I do not have this problem with movie footage imported from any other device.
Any ideas?

HT1338 problems with time machine and parallels desktop, mac osx mountain lion 10.8

have a good day, i have been problems with time machine and parallels desktop, dont work in mac osx 10.8, i upgrate two mac´s (macbook air, imac), in the two machines shows problems, could you help me please.
two machines have good ram memory (macbook air 11.1 2010 early , imac 2009 late).
i am waiting for your help.
thanks.
Jesus.

Take a look here:
http://pondini.org/TM/Troubleshooting.html
Specifically, you'll probably want to try item #A5 on that page, but there's a lot of other info there that may be useful.

Problem with inifile.fp under Linux

Hello all,
I noticed a problem with inifile.fp under Linux: I can't write the updated
ini file !
hConfigFile = Ini_New(0);
if (Ini_ReadFromFile (hConfigFile, ConfigPath));
Ini_GetInt(hConfigFile, "Client", "ChartsRefreshRate", &ChartsRefreshRate);
Ini_GetInt(hConfigFile, "Client", "ChartsDuration", &ChartsDuration);
.... Change the values ...
Ini_PutInt(hConfigFile, "Client", "ChartsRefreshRate", ChartsRefreshRate);
Ini_PutInt(hConfigFile, "Client", "ChartsDuration", ChartsDuration);
if (0!=(Err=Ini_WriteToFile (hConfigFile, ConfigPath)))
fprintf(stderr, "\nWarning: problem writing %s configuration files: %s",
ConfigPath, GetUILErrorString(Err));
This fails and displays:
Warning: problem writing Config.ini configuration files: File not found
But not only that, it also deletes the ConfigPath file !!!
Which is rather unacceptable !
I see that the inifile.fp I have on the PC (CVI 8.5) is different than the
one I have on the Linux install (cvicc 8.0). Can I copy all the inifile.*
files to Linux or is it more complicated than that ?
Guillaume Dargaud
http://www.gdargaud.net/

Hello Luis,
I came here to check if a new version of CVI (cvicc, not the real-time
module) for Linux had come out and, sadly, it appears that's still not the
case...
But I saw your followup to our original discussion.
The ini file has grown tremendously since then, but I think I had the
problem with even the most basic file: simple name (same directory, no
path), but maybe it was on an NFS directory (that's no longer the case).
Also the fact that instead of writting _in_ the file (where permission was
allowed) you wrote to a temp file (that may not have had permission) and
then renamed accordingly...
I'll start a new project soon that will require ini files, so I'll test it
again.
> (I realize it has been a while, but I thought I'd ask anyway, in case you
> still remember this).  
> I was investigating this bug today, but so far I haven't been able to
> reproduce it. I tried it in both Windows and Linux, with both a
> writeable location for the test .ini file and a non-writeable location,
> but so far the behavior is as expected. Ini_WriteToFile does return an
> error when the location isn't writeable, but it doesn't delete the file.
>   So I was wondering whether this might be related to the specific
> path you were using, or maybe even with the content of the .ini file
> itself. I don't suppose you would remember whether there was anything
> unusual about the path, would you? Also, do you happen to still have this
> .ini file lying around somewhere and wouldn't mind sharing it with me?
>   Luis
Guillaume Dargaud
http://www.gdargaud.net/

I cannot use Windows Movie Maker in Parallels on my iMAC

Hello, I run Windows 7 on my iMAC via Parallells without any problems normally. It works e.g. fine to run the Windows Office programs. But I run into problems when I try to run Windows Movie Maker.
I get the instruction to run dxdiag.exe to verify my DDI-version.
And then I get the following message from Windows:
'"The file prl_umdd.dll is not digitally signed, which means that it has not been tested by Microsoft Windows
Hardware Quality Labs (WHQL). You can maybe get a WHQL-signed file from the hardware supplyer."
Is this a wellknown problem among mac-users who run Windows via Parallels?
Any suggestion what I should do?

you should ask the experts at this board:
https://discussions.apple.com/community/windows_software/windows_compatibility
here, we discuss iMovie, the video-edit.app which comes with every Mac.......

Video problem with movies that previously played okay

I transfer movies on and off my Touch to open up space. I previously copied a dvd using toast Titanium 8 to my touch which played fine. I then deleted it to make space. When I tried to transfer the movie back to the Touch a few days later it wouldn't copy, giving me the message "the video is not the right format..." etc.
Why would it copy over one time and not another.
Any help would be appreciated. I seem to find this to be a recurring problem with some files, even though they have been converted to iPod compatible files with Toast, which are the .mp4 variety. Same thing has happened occasionaly with iSquint.
Cheers
mrjazz

Probably because the iTunes file has an embedded Digital Rights Management certificate which prevents unauthorised publishing of copyright music to web sites such as Youtube.

Photoshop CS5 - Image resize problem with move tool

Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I didn't have this problem with CS4 and I've only recently upgraded. I work around this problem by using the proper Free Transform tool (ctrl+t) but it would be nice to know why the hell this happens. It seems to me to be more of a graphical glitch than a software preference but I thought I'd check just-in-case.
Specs:
Photoshop CS5 V12.1 x64
PC
Intel Xeon W3505 @2.53GHz
Nvidia Quadro FX580
12 GB RAM

ace591 wrote:
Hi People
Here's my problem
When I try to resize an layer using the move tool (as opposed to the Free Transform tool), while I'm in the process of moving the scaling handles, the bounding box reflects my movement but the layer preview stays at it's original size. When I stop moving the handles there is a few seconds delay and then the new scale size shows up. If I try to move the handles again, without commiting to the transform, the layer preview reverts back to it's original size until I've finished moving the handles.
I also read you you tried updating your video dirvers and your syste crashed and you had to roll back. Make sure you have downloaded the latest correct drivers. If that does not work try turning off Open GL in photoshops preferences.
On my old XP 32 bit system CS5 movet tool with transform dialog does not fail like on your system. I can move the handles time and time again without commiting the transform. The only way to have Photoshop revert the transform back to the original state is to press the ESC key to cancel the uncommitted transform.

Problem with .MOV

Hi everyone,
I'm having an issue with .mov files in After Effects. Here is my system:
Windows 7 64 bits
Sabertooth X58
Intel i7 920 @2.67GHz
Nvidia GTX 640
12 GB Corsair DDR3
Adobe CS6
The problem: Some .MOV files I play in After Effect look corrupted:
When I play them, it they make my computer bug until it freezes or shows a Bluescreen. But the files aren't corrupted as they play without problem on VLC (independant from Quicktime). The problem also happens in Premiere and even Quicktime (Quicktime version: 7.7.4 (1680.86)). I can work without problem with some .MOV so I checked the codec of the different files. "Apple PNG" and "Apple Photo JPEG" are making my system crashing. But I can play, work with or export "avc1" without any trouble.
The other day I actually noticed a similar problem in Nuke. I worked with another .mov file (avc1) without any issue but once I tried to render it to a .MOV file (Apple PNG), the rendered files had the same kind of corrupted-looking (lines and sometimes green screen). When I export it in a normal png-sequence there was no problem.
Already tried but didn't solve:
- updating to last graphic drivers
- reinstall Quicktime
- reinstall an older version of Quicktime
- updating DirectX (I already had last version)
- try with or without CUDA in After Effects
- try to load the .mov from another harddisk
- set Quicktime to "Safe mode (gdi)" (doesn't help for After Effects)
- try to convert the file to a png sequence in Quicktime (crashed after rendering a few frames)
Has anyone an idea?
Thanks in advance!
Sakat
#update 1:
- Tried to convert a ".mp4" file to an ".mov Apple PNG". Then I convert it again to a ".mp4" with Wondershare Video Converter (the errors do not happen with that software). I can be play without problem on VLC that last ".mp4".
- Tried to play an ".avi" file in Quicktime: system crash.
- Tried to preview an ".mov Apple PNG" in half resolution in AE: system crash.
- Tried to export a ".mov Apple PNG" to an ".AVI" and an ".mp4 H264": It exported but the files aren't playable in any soft (including VLC and Wondershare Video Converter). I did the same process to a ".mov Apple PNG", it freeze Windows.
Message was edited by: Sakat

Today I tried to uninstall all Apple softwares, clean the register with CCleaner, delete Apple folders in Appdata (local, locallow, roaming), Flash the bios of my motherboard, reboot and then only reinstall the last version of Quicktime. And I tested all the advanced settings in Quicktime: safe mode (GDI), Directdraw acceleration, Direct3D acceleration. No result... I could play a "avc1 .mov" in Quicktime. That's all.
Last month I formated and reinstalled Windows. Before formatting I had no problem with these files. I didn't change anything in the hardware. So there must be something missing/corrupt in some codecs used by Quicktime or the way Quicktime renders these codecs.
I searched but couldn't get any result for a link to download a Windows version of ApplePNG codec...
Is there anyone who has an idea because I'm really getting stuck..

Problems with mov. files

I have a JVC Everio camcorder. I have been messing with it for weeks now with little luck. When you save files it is a moi. or mov. file.
The only program i want to watch the vidoes on is Quicktime. I am recording sports videos and want to use the scroll bar so i can look for errors in technique.
I have downloaded dozens of fixes and none of them work.
I can watch the clips in any viewer except quicktime. I have used power director, VLC Player, Windows Media Player, power cinema, and nero but none of them do what i want them to.
I can change the file name. I have changed the name to avi, mpeg, mpg, and everytime i try to open it in quicktime i get the message (quictime will not open it because it is not a file quicktime understands) well what does it understand? I bought quicktime pro because that was supposed to work well it doesnt.
Please help

I am also having problems playing .mov files. My problem is that I just bought a Canon camera that shoots 720p video and when I save it to my computer and try to open it in quicktime, it plays but the picture hangs up. I have a Dell monitor that plays HD videos that i've downloaded from the internet all the time. The sound is fine but the picture lags and nothing i've tried seems to work. I have quicktime 7.6 and I want to know what I can get to make my computer play 720p files.Can you help please?

Communication problem with printer when using Parallels

OK, apologies if this has been asked elsewhere but I've been trawling the forum for an hour and have yet to find the exact problem that I'm having!
First of all, I'm a recent convert to Mac (hurrah I hear you all cry), secondly, I've set up Parallels to deal with some PC left-overs, thirdly, I've tried to use my old Dell printer and realised Dell doesn't support Macs (or not my AIO 922 anyway).
So, I thought I'd get round this by installing the drivers for the printer on the Windows partition, which all went well until I actually tried to print something... although the printer is visible and 'on-line', I get the box informing me there's a communation problem with the printer and computer.
It's beginning to wind me up so any info/advice would be greatly appreciated

This is either a Windows or a Parallels problem. For Parallels go to http://forum.parallels.com. For Windows go to the support forums at Microsoft.
There is no support for either product at these Discussions.

BAPI_GOODSMVT_CREATE Problem with movement 161

Hi Gurus,
I have a problem with BAPI_GOODSMVT_CREATE and movement type 161. We used to put 161 as the movement type when referencing a PO with "Returns Item" marked. Movement was properly posted. But now I am facing the following issue, when trying to post 161 I have the message "No goods receipt possible for purchase order 4200000084 ...", If I use movement type 101 system will assume 161 and everything is OK, but I don't understand why I could use 161 before and now I can´t, this is happening with all my POs with "Returns Item" marked.
I understand that I can just use 101, the problem is that this will require a change in a non-SAP system... that is why we prefer still using 161.
Any help will be highly appreciatted.
Thanks!

Hi,
Check this link;
Re: BAPI_GOODSMVT_CREATE for movement type 161
Regards

I have a Macbook OSX Version 10.6.8 and I have problem with Movie application 7.1.4 (585) when I try to open it a statement said "MIssing Quicktime Components, re install from Movie Installer" my operation system is snow leopard. Help please!

I have problem with the Movie application 7.1.4 (585) when I try to open it a statement indicate that there are some "MIssing Quicktime components, re-intall from movie installer" . How can I fix thi problem. Please help.

Acrobat Support

Problem with different calendars under Mountain Lion

I upgraded recently from Snow Leopard to Mountain Lion and experiencing an annoying problem with the calendars "On My Mac" (I am using a MacBook Pro from mid 2009). With iCal under Snow Leopard I had seven calendars - Meetings, Performances, Family, etc. with different colors. After the switch to Mountain Lion these categories aren't maintained properly. Four of them have been seemingly merged into two, so that for example an event can't be categorized as "Family" but gets shifted automatically to "Meetings" (both calendars stay checked in the editing panel, but only one "sticks"). So I have three calendars I can use and a four I can't.
If I try to add a new calendar it appears in the list, but no event can be assigned to it.
Is there a limit to the number of calendars one can have?
I don't use iCloud, so there is no issue there.
I have one Google calendar (a work schedule I have subscribed to ) which also works with no problems.
Any ideas?

Same problem when reseted the PRAM.
I read some Chinese Web , Many people got the same problem after upgrade to mountain lion
you can see the locked icon show in the bottom left conner even my card is unlock
I can read but can not delete any Photos
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23227AM .png
you can see the locked icon show in the bottom left conner
But I can edit everything in my Harddisk
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23235AM .png
External Hard Disk no locked icon show in the bottom left conner
http://i83.photobucket.com/albums/j286/2cktang/OSX/ScreenShot2013-03-11at23220AM .png

Problem with joined piece under Exchange

I have two mail box one in Notes8.5 and a new one in Exchage 2010. When I receive a mail with a joined peice like a pdf when I want to use it by press it, in Notes no problem I can select the Application but under Exchange it's charged charged but nothing I can select application. It's a problem with Exchange or I have to do something with applications?

UPDATE: The problem has been fixed. It turned out I had a different alias than my login in my account, which was confusing things. Getting rid of it fixed the problem.

Problem with move tool? (Win 7)

On Photoshop CS4 , everytime I select the move tool and decide to move an object among a layer , it moves the object off screen , making it difficult to bring it back to the canvas to move . I know it isn't jumping layers , because only the object inside of one layer i moved , but ... am I the only one that has this problem ? How do I fix it ?
It doesn't only have this problem with the move tool , but with the text tool , marquee tools , and the brush tool , as well . The text tool would jump off screen , the marquee tool would position the marquee somewhere other than where I clicked it to be , and the brush tool would sometimes jump out of the brush outline . Can someone help ?

Standard questions:
Have you updated to version 11.0.1?
Have you updated your video drivers?
Is you video card compatible? See http://www.adobe.com/go/kb405711
Have you tried turning off OpenGL in preferences?
If the answer to all is yes, try resetting your preferences as described in the FAQ.
http://forums.adobe.com/thread/375776?tstart=0
You either have to physically delete (or rename) the preference files or, if using the Alt, Ctrl, and Shift method, be sure that you get a confirmation dialog.
This resets all settings in Photoshop to factory defaults.
A complete uninstall/re-install will not affect the preferences and a corrupt file there may be causing the problem.

Problems with Movie Maker under Parallels.

Similar Messages

Maybe you are looking for