Problems with MSG2 HD when multiple games are on

This is the second time I've noticed a problem with MSG2 in HD when 3 or more games are on MSG and MSG+. Basically channel 578 (MSG) will work fine and 580 (MSG +) will work fine, but 579 (MSG 2) disappears. The standard 79 channel works but 579 doesn't show up in the channel guide and entering 579 on the remote takes you to 578 instead. When you go to 79 it tells you that an HD version is available by clicking C on the remote; unfortunately that takes you to 578 as well. Please look into this problem. MSG 2 HD works fine except when a third game is airing on MSG plus that night. Since the New York Rangers are often on MSG 2 I imagine this is ticking off a lot of other people as well.

Lightgrw wrote:
This is the second time I've noticed a problem with MSG2 in HD when 3 or more games are on MSG and MSG+. Basically channel 578 (MSG) will work fine and 580 (MSG +) will work fine, but 579 (MSG 2) disappears. The standard 79 channel works but 579 doesn't show up in the channel guide and entering 579 on the remote takes you to 578 instead. When you go to 79 it tells you that an HD version is available by clicking C on the remote; unfortunately that takes you to 578 as well. Please look into this problem. MSG 2 HD works fine except when a third game is airing on MSG plus that night. Since the New York Rangers are often on MSG 2 I imagine this is ticking off a lot of other people as well.
MSG 2 HD has not been added to the Verizon FiOS lineup yet. Verizon has said they hope to add it to the lineup sometime this year.

Similar Messages

  • Problem with FC security when data restrictions are based on RU dimention

    Dear Sirs,
    The data access restrictions for users in our system is configured, that reporting unitu2019s data can be accessed only by users that are responsible for ancestor's data based on RU hierarchy (restriction by RU dimension in data analysis).
    When reporting unit is moved in hierarchy from one parent to another -  old ancestor canu2019t access itu2019s data as only new ancestor do. But in that case we have a very big problem as users can't build old ancestoru2019s consolidated reports for previous periods - they are incorrect since RU dimension access is restricted for all periods.
    Are any ideas how the issue can be solved ?

    Dear Egle,
    Indeed,  the historical data within the reports will not be accessible after the data analysis modifications and this is the normal behavior of BO Financial Consolidation.
    Please note that an enhancement request was escalated to allow users to belong to more than one Data Access Group. This enhancement is referenced under the reference ADAPT01028492 ( for more information, you can refer to  the SAP Note 1405946 - BOFC - Allowing multiple Data Access Groups).
    This new feature is not implemented yet in  Financial Consolidation  and the current  workaround is to create 2, 3 or 4 users for the same person.
    However, this workaround will oblige users to disconnect/reconnect many times or open more than one session  to apply necessary changes on BO Financial Consolidation.
    If this request is quite important for you, we recommend you to enter this enhancement in our new site ( Idea Place): https://ideas.sap.com. Indeed, SAP has defined a new process and a new tool that is now available to customers  which allow them to log Enhancement Requests themselves and have the ability to work more directly with our technology and Development group.
    If the request sent by the customer is pertinent and voted by 10 other customers at minimum, the Enhancement Request will be probably accepted by the Product Group(to have more information  about this new process, you can refer to the SAP note 1515837 - NEW Enhancement Request Process - "Idea Place" )
    Let me know if you will need further details.
    Best regards,
    Emna.

  • Problems with Compiled files when Adobe Jetforms are used

    Hi,
    I am taking outputs of Customer Facing Documents from SAP R/3 using Jetform Output Designer Version 5.4.0.130.
    The printer I am using is HP LaserJet 5100 Series. From the information I gathered this uses PCL 6. Therefore I compiled the file with the presentment target HP Laserjet 5000/5000N(PCL6)-[hp5000x]. When I use the PDF viewer as the default it gives me perfect alignment of the various fields. However when I take a printout everything is disturbed.
    Can you please suggest, what is the best approach to take.
    Thanks in advance.
    Regards,
    Paul

    There is a difference in resolution between PDF print and PCL print. E.g. PDF is default 1000 dpi, which is fine for screen view, yet most printers are 300 dpi or 600 dpi.
    If you make a copy of the PDF.ICS to apv_PDF.ICS. You can change the resolution by opening the file with a text editor like Notepad. Set the value to match your printer. Choose your custom PDF printer driver in Output Designer and recompile the form.
    You'll find it in the \Config directory where your designer is installed. ..\JetForm\Output Designer\Config

  • A lot of memory is used when multiple tabs are open

    Is there anything that can be done about the insane memory usage in Firefox when multiple tabs are open? I often have 20+ tabs open and the amount of RAM that Firefox uses when I have it open with this many tabs is just ridiculous. As an example of this, I just restarted Firefox after checking the Windows Task Manager. The Task manager said that Firefox was using 1.2 GB of RAM. I did have 32 tabs open, but this seems excessive even for this many tabs. Some of the tabs were image heavy, but none of them had any video in them. I'd think 10 MB per tab of RAM would be plenty to cover these kinds of pages, maybe 20 MB at most. The upper end of that range would be 640 MB of RAM. Instead, it appears to be using an average of 40 MB of RAM per page when this many tabs are open.
    Is there anything that can be done to reduce amount of memory being used when multiple tabs are open? It really shouldn't need this much RAM to serve this many pages.

    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
    *Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
    *Do NOT click the Reset button on the Safe Mode start window
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • File corruption on SDCard when multiple files are being written from WinCE 6.0R3

    We currently have file corruption problems which we have been able to reproduce on our system which uses WinCE 6.0R3. We have an SDCard in our system which is mounted as the root FS.  When multiple files are being written to the file system we occasionally
    see file corruption with data destined from one file, ending up in another file, or in another location in the same file.  We have already written test SW that we have been able to use to reproduce the problem, and have worked with the SDCard vendor to
    check that the memory controller on the card is not the source of the problems.
    We know that the data we send to WriteFile() is correct, and that the data which eventually gets sent through the SDCard driver to the SD card is already corrupted.
    We believe that the problem is somewhere in the microsoft private sources between the high level filesystem API calls and the low level device calls that get the data onto the HW.
    We have confirmed that the cards that get corrupted are all good and this is not a case ofpoor quality flash memory in the cards. The same cards that fail under WinCE 6.0R3 never fail under the same types of testing on Windows, Mac OX, or linux.  We
    can hammer the cards with single files writes over and over, but as soon as multiple threads are writing multiple files it is only a matter of time before a corruption occurs.
    One of the big problems is that we are using the sqlcompact DB for storing some data and this DB uses a cache which get's flushed on it's own schedule. Often the DB gets corrupted because other files are being written when the DB decides to flush.
    So we can reproduce the error (with enough time), and we know that data into the windows CE stack of code is good, but it comes out to the SDcard driver corrupted.  We have tried to minimize writes to the file system, but so far we have not found a
    way to make sure only one file can be written at once. Is there a setting or an API call that we can make to force the OS into only allowing one file write at a time, or a way of seeing how the multiple files are managed in the private sources?
    Thanks
    Peter

    All QFE's have been applied we are building the image so we have some control.
    I have build an image which used the debug DLL's of the FATFS and I have enabled all of the DebugZones.  The problem is still happening. From the timings in the debug logs and the timestamps in the data which corrupts the test file I have been able
    to see that the file is corrupted AFTER the write is complete. Or at least that's how it seems.
    We finished writing the file and closed the handle. Then more data is written to other files. When we get around to verifying the file it now contains data from the files that were subsequently written.
    What I think I need to do is figure out in detail how the two files were "laid down" onto the SDCard.  If the system used the same cluster to write the 2 files then that would explain the issue.

  • After Installing Bitdefender 2011 Firefox is very slow and worse when multiple tabs are open

    Firefox performs very poorly after I installed Bitdefender 2011. There was no such problem with Bitdefender 2009. When multiple tabs are open, switching between them is not possible until tab contents are completed.

    As ninjafox says, the problem seems to be the BitDefender Anti-phishing Toolbar. Disabling this through Tools -> Add-ons and restarting Firefox seems to fix the problem for that session. However, the problem then reappears when the computer is restarted, presumably because BitDefender re-enables the toolbar.
    Another way of disabling all add-ons when starting Firefox is to hold down Shift while clicking on the icon (Windows only I think - at least doesn't work on Ubuntu for me).

  • Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer

    I have connected TABULAR Model to Excel, and in the pivot the filter is on multiple dimensions. When doing the drillthrough action it gives error - Error: Show Details cannot be executed when multiple items are selected in a report filter field or in a slicer
    Is there any workaround to this error?  so that drillthrough can be done even with multiple selection.

    Hi Vikas,
    The reason behind the error message requires the knowledge on what happens at the backend. When you perform a drill-through action, a query is sent to Analysis Services. This query is expressed in a query language called Multi-Dimensional Expression (MDX).
    Since the MDX language doesnot support drill-through command against a set (collection of tuples) an error is persisted. 
    For now, there is no workaround as it is a limitation of the underlying language that is generating the query.
    When multiple items are selected you lose the ability to drill-down on individual metrics. To resolve you must either:
    1. Select a single Item.
    2. Select all items.
    Hope this helps!
    Please mark as Answer if this helps! Thanks, Rajasekhar.

  • Dynamic sql reurns no data when multiple values are passed.

    (Dynamic sql returns no data when multiple values are passed.)
    Hi,
    While executing the below dynamic sql in the procedure no data is returned when it has multiple input values.
    When the input is EMPID := '1'; the procedure works fine and returns data.Any suggestion why the procedure doen't works when input as EMPID := '1'',''2'; is passed as parameter?
    =======================================================
    create or replace PROCEDURE TEST(EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
    stmt VARCHAR2(9272);
    V_EMPID VARCHAR2(100);
    BEGIN
    V_EMPID :=EMPID;
    stmt := 'select * from TEST123 where Empid is NOT NULL';
    IF V_EMPID <> '-1' THEN
    stmt := stmt || ' and Empid in (:1)';
    ELSE
    stmt := stmt || ' and -1 = :1';
    END IF;
    OPEN rc FOR stmt USING V_EMPID;
    END Z_TEST;
    ============================================================
    Script for create table
    ==================================================================
    CREATE TABLE TEST123 (
    EMPID VARCHAR2(10 BYTE),
    DEPT NUMBER(3,0)
    ===========================================
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('1',20);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('3',30);
    Insert into PDEVUSER.TEST123 (EMPID,DEPT) values ('2',10);
    =============================================
    Select * from TEST123 where Empid in (1,2,3)
    EMPID DEPT
    1     20
    2     10
    3     30
    3     30
    2     10
    ===================================================================
    Any suggestion why the procedure doen't works when input EMPID := '1'',''2';?
    Thank you,

    The whole scenario is a little strange. When I tried to compile your procedure it couldn't compile, but I added the missing info and was able to get it compiled.
    create or replace PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      IF V_EMPID = '-1' THEN
        stmt := stmt || ' and Empid in (:1)';
      ELSE
        stmt := stmt || ' and -1 = :1';
      END IF;
      OPEN rc FOR stmt USING V_EMPID;
    END;If you pass in 1 as a parameter, it is going to execute because the statement that it is building is:
    select * from TEST123 where Empid is NOT NULL and -1 = 1Although the syntax is valid -1 will never equal 1 so you will never get any data.
    If you pass in 1,2 as a parameter then it is basically building the following:
    select * from TEST123 where Empid is NOT NULL and -1 = 1,2This will cause an invalid number because it is trying to check where -1 = 1,2
    You could always change your code to:
    PROCEDURE TEST (EMPID IN VARCHAR2, rc OUT sys_refcursor)
    IS
      stmt        VARCHAR2 (9272);
      V_EMPID     VARCHAR2 (100);
    BEGIN
      V_EMPID := EMPID;
      stmt := 'select * from TEST123 where Empid is NOT NULL';
      stmt := stmt || ' and Empid in (:1)';
      OPEN rc FOR stmt USING V_EMPID;
    END;and forget the if v_empid = '-1' check. If you pass in a 1 it will work, if you pass in 1,2 is will work, but don't pass them in with any tick marks.

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after pri

    How do I save a PDF ready for print. I have a problem with the fonts. The fonts are blurry after printing. There is a trick in saving PDF.

    Hi el_giclee,
    Important to note from the beginning is that when you create your Photoshop document make sure you chose 300 Pixels/inch as your resolution.
    I'm interested in seeing your Save Adobe PDF dialog box after you choose to save the PDF.
    Could you post a screenshot of this dialog box with the Compression menu selected on the left side?
    It's a good idea to select High Quality Print or Press Quality in the Adobe PDF Preset menu at the top of this box. It will automatically select the best default settings for a printed piece.
    Michael

  • Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    Is there a bug or problem with increased noise when exporting pictures out of Lightroom 4?

    As you are asking about it, looks like you do see a problem. So if googling does not provide a solution, you should describe the issue in detail so we can try to help out.

  • Having problems with texts width when viewed in Firefox

    I My site is OK when viewed in Chrome and Safari, but in Firefox, the width of paragraphs is becoming very long and all is displayed wrong.
    I need a clue where to look to fix. I have not , or very little knowledge of HTML code. So I rely on the DW CS5 interface.
    Thanks,D.

    Thanks Nancy ,
    I'll try,
    Should I just paste your info between the brackets, I guess.
    I am not so good with this but I need to spent a bit of time to fix this
    old web site while another one is being designed.
    Yes the images are too big, I'll reduce them, and optimize. This was
    done in a rush..
    D.
    Le 14-02-23 18:07, Nancy O. a écrit :
    >
          Re: Having problems with texts width when viewed in Firefox
    created by Nancy O. <http://forums.adobe.com/people/Nancy+O.> in
    /Dreamweaver support forum/ - View the full discussion
    <http://forums.adobe.com/message/6149874#6149874

  • HT4623 I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

    I downloaded the ios 6 on my iphone. I'm having problems with applications. When I open any application, in seconds then closes and returns to the home screen. What could be happening?

    Did you change any AppleID accounts or anything?  I've seen this happen when changing accounts or certain restore situations.
    If you are using iCloud you should be able to reset your phone to Factory Defaults and restore from iCloud, but it always makes me nervous.

  • WRT160n v3 has slow connection when multiple users are connected

    As of last night my router has been producing slow connectivity when multiple users are connected to it, but it's perfectly fine when only one user is connected.
    I am on a laptop myself, but we also have a second laptop and a desktop where the modem and router are set up.
    I have upgraded the firmware so that is up to date.
    We have Comcast Fiber Optics so my internet speed is normally quite fast even when all of my computers are connected.
    Some settings that I have that might help resolve the issue:
    I am using DHCP Configuration.
    My Channel Width is set to 20 MHz and I am using Channel 11.
    The Security Mode is set to WPA Personal. I had it on WPA2 Personal but I read that changing to WPA Personal might help and so far it doesn't seem to have done anything.
    I set the Beacon Interval to 50, Fragmentation Threshold to 2304, and RTS Threshold to 2304.
    Everything else is set to the default factory configuration.
    Just today I received a notice that said "Windows has detected an IP Address Conflict", but ever since I reinstalled the Firmware it hasn't come back. I've rebooted both my laptop and the desktop to confirm it hasn't come back as well.
    I consider myself to be computer savy, but I just can't figure out what the problem is as I've tried everything that I could think of including reconfiguring my router and restarting my modem as well. This problem has presented itself in the past before but unfortunately I cannot remember what I did to fix it.

    Try using inSSIDer to help you find the best channel.
    http://www.metageek.net/products/inssider/
    If that doesn't help, you can try disabling WMM.
    Edit:  You should use WPA2 AES security for best performance.

  • I have a problem with the keyboar.when i push the key enter it doens't work

    i have a problem with the keyboar.when i push the key enter it doens't work

    Final Cut Express was discontinued about 18 months ago, before the release of Lion (10.7).  It is no longer a supported product and was never supported on Lion, nor on Mountain Lion.
    While some FCE users have had success running FCE on Lion, many have reported problems including problems with chroma keying.   I do not recall any solution to the chroma keying problem, but you might try searching this Forum to see what others have discovered or tried.
    Final Cut Pro X is the app supported on Lion & Mountain Lion, and the future direction Apple has taken.  Since your computer lab has already moved to Lion (10.7.5) and presumably will move to Mountain Lion in the future, you should begin the process of moving to Final Cut Pro X.  I appreciate there are implications for cost, training, inconvenience and re-doing lesson plans.  But technology moves on and at some point we need to move with it too.

Maybe you are looking for