Problems with MSI 648 Max
I have problems with my sons MSI 648 Max Mainboard, everything seems to be alhright, but when I upgraded the BIOS version to the lastest. the computer starts to hang. I have also but a new harddisk in to the computer an some more RAM. I think the problem begin in the powersupply, its just a 250 W powersupply to the computer, and we have av 1.8 GHz Celeron. Have anything had this problem, or is it something I should think about after the upgrade of the BIOS?.
I know that 250 watt is to small, but the computer have function great in 2 months. But after i have taking out the old harddisk and but in a new bigger one, and placed some more RAM (256). After that I installed Windows XP on the new harddisk, but after that I upgraded my BIOS version to 1.4. After the upgrade of the BIOS the computer starts to freeze after a while. I tried to reinstall XP but the computer freeze under the installation. I have tried to switch back to older BIOS version, but I cant make it work. I have really hard to believe that the powersupply is the reason why the compter freeze.
Similar Messages
-
Sound Problems with MSI 648 Max ( MS-6585 ) Board - Help !!!
Hi,
i have the MSI Mainboard: MSI 648 Max ( MS-6585 ) and when I put on the microphone i have a bad sound on my soundboxes like scratching or beeping.
I have installed a new BIOS update and new Sounddrivers.
I have Win2000 with SP3.
Anybody can help me???
THX ;(Error404,
I since you have a 648 Max and you posted in the Multimedia Forum, I moved the thread to PIV Motherboard Forum for you.
Good Luck,
Richard -
Weird problem with my 648 MAX-L board
Hello friends:
I recently brought a 648 MAX-L board and had a weird
problem: every time when I power on the system, it
could not find my hard drive (Seagate 80G/7200 rpi).
But when I reboot, the hard drive is found and the system could then boot without problem. So the problem
is that I have to reboot one every time I'd start my
PC. This is weird. I suspect something is wrong with
BIOS battery?if you disable fast boot does it start first time
a weak psu may be related to this,drive not spinning up fast enough first time -
BIG failure problem with my 648-max mobo
I was attending a LAN two days ago and while playing a game, my computer froze. No big deal, it occasionally happens. So I go to restart the computer, and when i did, I now get a "Please Check Signal Cable" message. From here, I tried removing and replacing the vid. card, swapping RAM, swapping PSU, switching up parts in the PCI slots, and resetting the CMOS. None of these things have gotten my computer to boot up.
When I turn on the computer, i am supposed to hear 2 beeps. One being the mobo firing up (With a white MSI screen), and the second confirming the load up. I do not hear any sounds, meaning that my motherboard is not responding. I made sure that all connections are made. I know of this because the fans turn on, and the psu gives off all of the necessary volts.
Could it be possible that a few dip switches were tripped? How would I reset them? Does anyone have any kind of input for me? If not, I may have to buy a new mobo.
any help is appreciatedYou said, swapping power supplies, did you actually change out to another supply?
If not, maybe you should do this.
Shut down your computer and open it up. Leave the power supply connected to the AC power cord.
Leave the power supply's master power switch on, if it has one.
Disconnect the ATX power connector from the motherboard. This is a wide, flat connector with two rows of pins and a locking tab.
Locate the pin connected to the gray wire. This is the PWR_OK pin.
Locate any pin connected to a black wire. These are the ground/earth pins.
Place the red (positive) probe of your voltmeter on the PWR_OK pin, and the black (negative) probe on any ground pin.
If the gray pin reads 2 volts or more, then the power supply passed its internal diagnostic. Your power supply is probably good.
If the gray pin reads much less than 1 volt, then the power supply is dead. Replace the power supply.
If you lose part of the power supply, your vga ram/rom and your beeps wont work, but the fan can still come on. different voltages. its a starting point. C -
Can anybody give me a good tips, whats wrong when Windows XP installation (BSOD) failed on a computer with MSI 648 Max, I can see that is many in the some siuation as me. But no one of the solutions looks like i good one. Is it somebode that have find out the problem, or?
Its a good idea, but the RAM that I use is the same thats worked fine in the computer earlier. Its DDR DIMM 3100 TwinMOS, and thats a good stuff if I know it right?.
I have tried to take out the harddisk and placed it in another computer, and installed Windows XP. After that I placed the harddisk in the computer with the MSI motherboard, and I get I/O error and it couldnt red from the harddrive. I think that its the 250 watts powersupply, as the problem. I have looked i BIOS and under PC Healt, and there I could see that the +12 V and -12 V will only give +/- 11-11,5 V. Now I have purchase I new bigger powersupply, and hope that gonna fix the problem. -
MSI 648 max problems, please help
Just put a new machine together and I am having some problems, hopefully someone can help.
My machine seems to run pretty stable in OS, but dies when any game is played. It will crash anywhere from 2 minutes - 45 minutes in the game. Ive tried several games: C&C generals, unreal2, etc with the same results.
Bios are updated and nothing is overclocked. Win XP is fully updated.
Specs:
MSI 648 max, 533fsb
p4 2.4 northwood
Seagate 80gig hd 7200rpm
MSI g4 ti4200
2 - 512mb pc2700 ddr333 dims (double sided)
Antec 350w ps
sb live
48x liteon cdrw
16x liteon dvd
We are using a Kingwin KT-436S-WM case
http://www.kingwin.com/product.asp?cid=15&pid=75
It has a total of 5 fans with intake/exhaust
HSF currently being used is the retail box HSF
With the case sides on, here are temps at idle after 10 minutes in OS:
Proc: 136
System: 91
Vid card: 118
With the case sides off, here are temps after running 10+ minutes in OS:
Proc: 125
System: 86
Vid card: 114
Here is the error that pops up (after crashing) when playing Command and Conquer: Generals:
Technical Difficulties
Sorry a serious error occured
Thanks in advanceWell my roomate cancelled the memory test after 12 hours, so I dont know those results.
I do know that after removing 1 of the DIMMS, the machine seemed to be stable playing games.
I sure wish MSI would have stated it only accepted 1 double sided DIMM.. especially when the reccomend Kingston ram, which is double sided......
Me and my roomate BOTH bought this motherboard, while my roomate only bought 2 DIMMS of 512, I bought 3!!!!!!!!!!!!!!!!!!!
So now it looks like we need to return these motherboards and get new ones... I HAVENT EVEN GOT MINE OUT THE BOX!!!!!!!!
Any reccomendations on an MSI motherboard (or any) that support double sided DIMMS? I am looking for 3 slots...
thanks...
Any other advise on how to get this motherboard to work with all this ram would help too, so we dont have to RMA through newegg....
Anyone from MSI read this board?????
X( :O ?( -
MSI 648 Max - Display Problems
I recently bought the MSI 648 Max motherboard, as my system needed an upgrade quite badly. To cut the costs down a bit, I’ve used some parts from my previous system (eg the video card which is an 2x AGP, 64 Mb, Kyro based card) but got new RAM, CPU and psu.
I put together the system (described below), loaded Windows ME, updated all drivers with latest releases, and the thing works but the quality of the display is really bad ;( . That is, I get lots of video artefacts (shadows, fading text, vertical lines, distorted colours, etc). The video card was working fine on my other machine. Also, Sisoft Sandra says that the card is operating at 2x AGP, as it should.
I am not overclocking; some of the BIOS parameters I used are as follows (based on the OPTIMAL DEFAULTS):
AGP Aperture Size 128 Mb
DRAM CAS Latency by SPD
Timing Setting Mode NORMAL
MA 1T/2T Select AUTO
Primary Graphics Adapter AGP
Allocate IRQ to PCI VGA NO
CPU/DRAM Frequency Ratio by SPD
DRAM Frequency 167 MHz (for now)
CPU Frequency 133 MHz
AGP/PCI Frequency 66/33
DRAM Vcore 2.6 V
CPU Vcore AUTO
The system temperature showed in the Health Status is less than 40 C (104 F).
I have tried the latest AMI BIOS (version 1.3), and then reverted to version 1.0, but I still have the same display problem.
I would really appreciate some help.
Ciao
mystro
========================================
Windows ME (v4.90.3000)
Pentium4 CPU 2.4 GHz (133x18.0), FSB 533 MHz
MSI SIS648 Max (MS 6585) ver. 1.0
2 x 256 MB Corsair DDR400 (CMX256A-3200C2, CL = 2-3-3-6-T1,
Hercules 3D Prophet Kyro 4500 TV Out (Kyro I not II) 64 Mb, AGP 2x, 175/175 MHz
IBM 40GB 7200RPM UATA100
Mitsubishi 40x CD-Rom
Yamaha 8424S CD-RW
Adaptec 2930U SCSI card
Eagle 350W psu, 190W (combined 3.3V & 5V)boards agpx4 and 8 only so i dont advise using that card
http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=355&MODEL=MS-6585 -
Msi 648 max working with ati 9700
Hi,
I got it working (100% no crashes) today on windows 2k adv server:
msi 648 max (6585 early version), ati 9700 (1st version), and mostly the latest drivers/software, e.g. msi mb bios v1.2, sisagp47.exe, siside47.exe, ms directx9 (dx90_redist.exe), wxp-w2k-radeon-7-83-030120a1-007447c-efg.exe, control-panel-7-83-030120a1-007447c-efg.exe.
Before you get happy, now I want to replace the 648 motherboard with something better. It is a total waste of money to try running an ati 9700 on an msi 648 max.
Summary: I had to set my DRAM memory clock to 2.5, fast write off, and agp to 4x. There are a bunch of other bios settings and ATI control panel setting to keep it from crashing. If anyone is pathetic enought (like me) to want more information, then post your questions.
The only reason I'm posting my results is because I got all my help from people on this board. BTW I'm running Corsiar CMX512-3200C2 (at 2.5 sucks), and Antec Truepower 550w power supply (which is not p.o.s).
Good luck and save your money....
Thanks all.Hi,
I agree. My Bios is at version 1.2 because I flashed it a couple months/weeks ago and that was the current version at the time. Now they have up to 1.4 but I did not need it.
Bye. -
Intel 3.06GHz on MSI 648 Max L
Hi,
I have a question; if I were to purchase in the future a P4 3.06Ghz processor which supports HT, will it work on my MSI 648 Max without hyperthreading just as a normal processor? I understand that hyperthreading does not work on this board (the one without the udated chip). I'm just curious if the processor itself is supported. I don't see why not, it should just work as a single 3.06 processor. Thanks in advance.
Razvan ScutaruI have the 3.06 running in mine , and the board is the one that does not have HT.. and it works just fine..
The only thing that I have found is that you cannot run 400 mghz ram in it with spd setting.. you will have to go and set up the setting manual and then it will work.. don't ask me why I can't find it out..lol..
But other than that it is one fast computer..
also if you set the ram setting to anything other than the fast setting it will default back to 2.5 on the cas setting..
But after running bench marks I can't see any improvement by running at a cas of 2..
Also if you have a black screen when you are working with the bios you will have to clear them and reboot .
I had one that gave me problems but it was the PSU that was causeing it.. 400 wat but in real load it was only putting out 328 wats.. and that will not work with a 9700 pro in this board.. at least it would not on mine. -
Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
EwanHello
Goto the following link and see if this can give you some insight. Scroll down to the bottom of the page and it will give you configurations for that board. Good luck
http://www.ec.kingston.com/ecom/config/modelsinfo.asp
Quote
Originally posted by the_boat
Hi,
I have put three GB of RAM in a PC containing a MSI 648 Max motherboard.
The memory is 3 * PC2100 1GB of Samsung 266 DDR RAM. I've ran memtest
(http://www.memtest86.com) to test the chips to test the chips individually
and in blocks of two. The machine runs fine with up to 2GB, but fails
when all three are in.
I have two identical machines (and two sets of 3GB RAM), which exhibit the
same problem, memtest failing at the same time.
The machines run P4 2.4Ghz processors.
Can you help?
Thanks in advance
Ewan -
MSI 648 Max and ipods? Prob's connecting.
Please can anyone help?
I have a MSI 648 Max board with on-board usb2 and have problems connecting to my 4G 20Gb iPod. I'm pretty sure it’s the USB connection that is the problem. Has anyone else had this? Can anyone suggest anything to help? This is my last port of call before I’ll have to folk out for a Firewire card which I really don’t want to do.
Thanks.Thanks for replying .
I have used USB for a number of devices (Printed/Mouse/DigiCam) and have never had any noticeable problems. I’ve tried the disconnecting thing and it didn’t seem to have any effect.
I thought it might be something to do with iPod’s not liking on-board USB and decided to post a topic here to see if anyone else has had a similar problem. Doesn’t seem to be much talk of iPod’s though. I wondered if MSI knew of any problems.
I have been around a few iPod forums but not many people seem to be using on-board USB.
Keep the suggestions coming though. Thanks. -
What show 2nd termo-controller on a MSI 648 MAX?
Hi from Russia.
I have 43 motherboards MSI 648 MAX (HT-ready).
My computers spontaneously freezes. I think, that this problem because of overheating motherboard chipset. Motherboard Monitor showing t80 Celsius on a 2nd termo controller. This is error, or really big temperature of a SiS chipset (t80 on all motherboards)?
And i have other problem in a Counter-Strike.I press ESC when i play in OpenGL mode and i have black screen with freeze (video GF4 Ti4200 AGPx8 )
Maybe anybody know how solve this problems?
Please sorry for my english.Did you ever resolve this? I have a similar problem
Machine has been running with a 512 Mb/333 MHz module in slot 1 for 2 years with no problems. I want to increase the memory size. Tried adding all sorts of combinations of other modules, but won't boot. I went out and purchased a compatible Kingston 1 Gb/333 MHz CAS 2.5, compatible according to Kingston site. The memory counts to 1 Gb, and everything POST seems to work. I get a beep, and then nothing. Trying different slots, the same problem. The 512 Mb works in all slots, but not the 1 Gb.
What is the fix for this MSI memory upgrade issue? -
Degauss prob. w/MSI 648 Max pls help
PC spec. below.....message
Everytime I restart my monitor from Xp or when leaving the bios, my monitor does a degauss. And it gets very irritating X( when you fx. reinstall your PC from start.
The "light" on the monitor also goes from green-orange-green as if it had been shut down.
Have tried conn. the monitor to my other system, and here there are only degauss when i power my pc up.
Have also tried another MSI TD4200 as I have simular in my other PC. no effect at all...
A friend of mine got same PSU and Monitor and his system also degauss only when he power up the PC.
Have anybody ?? noticed a simular problem before, and if what's the "cure".....
To me it "smells" like a bios problems,,,,,,,,,but I be mighty happy to ANY other suggestions.
PC SPEC AS Follows
P4 2,4 533 w/box cooler
MSI 648 MAX
PSU VIP 450w w/an average power on 250w
2x256 Pc2700 Apacer
MSI GF4 TD4200 64mb
ASUS CD
Liteon CDR/W
WD 80gb JB 8mb cache
Monitor AOC 9KLR "new" versionNever the less it does........have tried the VGA card in another PC, and here there are no degaussing.....have also tried another VGA card,,,,,,,,,same deal mate! ?(
Problem is prob. related to the mobo power management......or the comb. of hardware........
I have tried changing every components exept CPU/Memory/Mobo with no changes..........
So to me i'm sorry to say it's looks like a faulty mobo or some mismatch in the bios settings.......... ;(
73/CT -
MSI 648 Max (Ms-6585) overclockability... Anyone?
Just bought a Ms-6585 which is also known as 648max. I wonder anyone else can share your overclocking experience on this board, and how is this board's overclockability.
I plan to get a P4 2.0A (tight budget) and overclock to 2660mhz which is running on 133x20. Do you guys think it can work?
By right P4 2.0A (not OEM version) overclock well through increase CPU voltage. I hope i can reach 2660mhz, pls point me out if anyone concerns. :]
thanksGive me a chance to show mine here. I'm really fedup for this moment. ;(
P4 2.4B w/ C1 stepping SL6EF
MSI 648 max rev1.0 w/ 1.2v bios
Samsung DDR2700 256x2 (K4H5609838D)
GeForce 2 GTS 32mb DDR
Maxtor 20GB - D740X-6L
Generic 450w PSU (+5 = 5.107 in bios)
temperature 32c idle 38 load
Ok now, my problem is can't get stable when overclock to 2610mhz (145x18') in WinXP. 2610mhz won't be the bottle neck for this C1 sweety and i don't think my ram giving me problem because i've down clocked it. What do u guys think what is wrong with my system can't clock higher. X(
i have one question here: the PCI/AGP bus for this board are - 33/66, 34/68, 35/70... Is it fixed by setting or it will raising follow by system bus increment. ?(
Appreciate IF someone willing to help. thanks ;( -
MSI 648 Max -- AGP setting in BIOS
I had tried to install the driver for the GeForce4 MX440.
After finished the install, I reboot the computer.
When loading into WindowsXP[the black screen with a WindowsXP logo in middle], the monitor suddently turns black and changed to "power saving mode", but the computer power LED still on.
I think there are something wrong in the BIOS.
Can you tell me whether the BIOS setting is correct?
Thank you!
My computer:
Pentium 4 2.53GHz
MSI 648 Max (MS-6585) BIOS v1.1
Inno3D Tornado GeForce4 MX440 DVI TV 64MB AGP [AGP2X/4X]
Kingston 256MB DDR400
Maxtor 6Y080L0 7200rpm 80G ATA133
SONY Trinitron Multiscan 15sf II
BIOS seting:
Advanced Chipset Features:
AGP Aperture size = 128M
DRAM CAS# Latency = By SPD
Timing Setting Mose = Fast
MA 1T/2T select = MA 1T
PNP/PCI configurations:
Primary graphics Adapter = AGP
Allocate IRQ to PCI VGA = Yes
PCI IDE Bus Master = Enable
Frequency/Voltage Control:
CPU/DRAM Frequency Ratio = By SPD
DRAM Frequency = 200MHz
Auto Detect CPU FSB = Enable
CPU Frequency = 133MHz
AGP/PCI Frequency(MHz) = 66/33
Clock Spread Spectrum Enable = DisableOh~~!
I haven't changed the psu........
Any other method to solve the problem?
My computer can successfully reboot and load into WindowsXP for once, when I set the refresh rate to 85Hz, it hangs. I have to reboot it to safe mode and disable the card. Then it can boot into WindowsXP.
When I reinstall the driver, the problem happen again.
Maybe you are looking for
-
Do you have any idea, what makes to fix this error in creating PO.
The error is u201CDocument 101600 does not existu201D Do you have any idea, what makes to fix this error in creating PO.The error is u201CDocument 101600 does not existu201D Here the 101600 is PO no.
-
Very disapointed, SP13 doesn't runs on SUN Cluster!!
Hello, this is the 3rd time that we tried to install a support package in our productive SAP Enterprise Portal (SP10, SP12, SP13), and fails again. We restore the SP09 backup, and doesn't work also, and now we haven't portal! How is possible this? We
-
Viewing music videos on iPhone?
I downloaded Beyonces new album, but can only hear the music and cannot view the videos. What am I doing wrong?
-
How can i increse query performance other than creating aggregates
Hi, i created one query and it will take more time to give a report i created aggregates but no use again it will take same so pls give me a option to increase the query performance. bye . sandhya.
-
[CS4 Server Win]: Plugin does not run on Windows Server 2003?
Hi, can anybody help? My plugin is running on Windows XP and Windows Vista. On both operation systems the scripting methods are visible in ExtendScript Toolkit and can be called by javascript. On Windows Server 2003 my plugin is not running, the scri