Problems with MSI K9N6PGM2-V2 Motherboard in a barebone package

Hi:
I bought a MSI K9N6PGM2-V2 Motherboard and AMD Athlon X2 5200+ AD5200OCK22GM Processor with a DiabloTek CPA-0280 Elite ATX Mid Tower Case from TigerDirect. This is their so-called barebone package.
Unfortunately, I did not receive the CPU cooler so I bought a FAN from a computer store. Now, I cannot seem to make the system work.
I have several questions.
First, the JPWR2 power connector on the MSI is 4-pin. However, I cannot find a 4-pin power cable from the DiabloTek case. There is one cable that has 6-pin and it can fit into the JPWR2. Unfortunately, when I turn on the power, the Motherboard does not boot.
Second, I have an elder case, which does have a 4-pin power cable and the motherboard does boot. However, I do not see the BIOS in the screen.
I guess that I must have done many wrong things there.
Could someone who is familar with this motherboard pelase give me some suggestions?
Thank you very much,
Cheers,

Fan? You need a heatsink with a fan to cool the CPU down, just a fan won't do it.
As for the case + PSU: +12V: 30A that isn't a lot, but should show a BIOS if you didn't insert some fancy videocard.
And for the 6pin, that's a PCIe powerconnector!!!
According to TigerDirect: 1x 4+4 Pin Motherboard Connector +12V so you have the proper connector.
But you may have blown something to pieces by gambling on the connections.
Else? Nothing left to say but: >>Posting Guide<<

Similar Messages

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

[Athlon64] Problem with MSI RS480M2-IL

Hi all,
I have problem with MSI RS480M2-IL. My problem is My temperature is very high... around 55-60c ... i am using AMD 3000+ Venice and no OC... and SpeedFan unable to detect my Voltage usage... Aida32 also same... 1 more thing is when i tried to run SiSoft Sandra 2005... it will take alot of time to load, sometime will just hang. i Test PCMark04 and found only got 3k for average mark... my friend getting 4k+ and we are using same spec... Below is my Spec:-
MSI RS480M2-IL
AMD 64 3000+ Venice E3
Bios Version 3.8
Geil PC3200 DDR400 2.5-3-3-6
Maxtor 60GB HDD 7200RPM 2mb
Verudium Power Vortex 420W
Hope some one can advised me what to do... my score too low and my board detect temperature and voltage is not accurate... Hope MSI Engineer will look thought and help me... Thank for Viewing !

the underlying "Who's fault is it?" question: AMD64 VENICE CORE (E3) PROCESSORS? or MSI RS480M2-IL MOBOS?
so far, ALL users with this proc/mobo combination HAVE the high (or incorrect) temperature issue. replacing the mobo obviously will not resolve the issue but replacing the proc with one that is NOT a Venice E3 core, does the trick. but of course, not everyone will have the privilege of exchanging their damned proce via the retailer specially if it's beyond the first 21 days of purchase.
in my case, my retailer refused to have the E3 proc replaced with the 'corrected' E6 version no matter how hard you explained the known issues with the E3. no chance of AMD recalling the E3 cores since problems with are only isolated to the particular MSI RS480M2 boards.
so for users that are and will be stuck with this combination, what is the solution then to the temperature issue? in my opinion, it's up to MSI to perhaps release a bios update that will correct this. another important thing to consider is the question: IS MY VENICE CORE INDEED OVERHEATING OR IS IT JUST THE MSI MOBO SHOWING INCORRECT READINGS? the proc overheating in actuality is obviously a lot different thatn just having an incorrect bios temp readings.
based on what i have observed, my Venice core displays the correct cpu temps (33-35*C) when being used on a MSI K8 Diamond mobo. placing the proc back to the R2480M2 board shows a very unusual 61-63*C bios cpu temp. furthermore, if i touch the stock heatsink/fan cooler that i have (for both motherboards), it really does NOT seem to be extremely hot to think that the cpu is actually overheating. in addition, my system using the RS480M2 performs well and has no spontaneous shutting down problems whatsoever. of course, my sense of touch is not as accurate as a thermometer but more or less, if you consider all the points i mentioned, most of us can say that the whole issue is just a matter of incorrect cpu reading.
perhaps the ATI chipset is the one to blame since i have notices as well that the Venice core processors do not seem to have this high temp problems with MSI's K8 mobos with the NVIDIA chipsets.
one last question: so do you guys think that this problem can be resolved by a simple bios revision? (as a dell tech guy, i do know for a fact that bios updates resolves overheating error messages in Inspiron/Latitude laptops)

I have a small problem with MSI GF4 MX 420

Hi,
I have a small problem with MSI G4MX420-T(S+C) ( MS-8878 ). Exactly with nVidia WDM Video Capture (universal), which " can't be turned on " by Windows XP.
I have also new drivers ...
Could someone help me?
Asus A7V333
Athlon 1700+
128 MB RAM
Thanks !!!

If you only have 10 seconds of content in a 15-second composition, then you need to either add more content or shorten your composition.
You can shorten the composition by changing the duration in the composition settings.
Since you're obviously very new to After Effects, I very strongly recommend that you start here to learn After Effects.

USB problem with msi (nforce 1)k7d420

USB problem with msi (nforce 1)k7d420
i encountered problem when using my apacer audio steno mp3 player with my nforce(which i don`t hav any problem when using with any VIA chipsets)
it detects and install the device automaticly but when i want to access it,it just gives me error msg
windows xp pro service pk1
nforce nvidia drver v2

http://www.nforcershq.com/forum/viewtopic.php?t=30003
may be ive not loaded it yet

Problem with MSI X58 Platinum SLI - IOH temperature !

Hi guys.
I have this PC configuration:
- MSI X58 Platinum SLI ( Bios Version 3.8 - http://img822.imageshack.us/img822/6707/161020101249.jpg )
- Intel Core i7 930 2.80 GHz box ( with Intel Turbo Boost running sometimes at 3.06 Ghz )
- MSI GeForce GT240 1GB DDR5 128-bit HDMI
- Corsair 6GB DDR3 1333MHz CL9 XMS3 Triple Channel Kit ( sets to AUTO and running at 1066 Mhz )
- Corsair CMPSU-750TXEU
- Ordinary case ( http://img828.imageshack.us/img828/4200/161020101246.jpg & http://img29.imageshack.us/img29/8480/161020101247.jpg ).
- Windows 7 Ultimate 64 bit.
I bought my PC components 2 months ago, so they are new.
Now, guys I think that is a problem with my motherboard. When I turn on the computer in Bios I have this temps: CPU – 30 C (86 F); IOH – 71 C (159 F); System 30 C (86 F) - http://img687.imageshack.us/img687/394/161020101242.jpg. After 2 minutes the temperatures are: CPU – 34 C (93 F); IOH – 82 C (179 F); System 41 C (105 F) and 2 more minutes later the temperatures are: CPU – 34 C (93 F); IOH – 84 C (183 F); System 43 C (109 F). After 30 minutes of doing nothing I have this temps: CPU – 35 C (95 F); IOH – 85 C (185 F); System 42 C (107 F) -
Guys it is normal with IOH temperature ? I am a little worried about it ( to be honest I am more than “a little” … I am worried a lot ).
Ok, I know I don’t have a good case but in 3 weeks I should receive this Thermaltake Spedo Advance Case (http://www.thermaltakeusa.com/Product.aspx?C=1121&ID=1829) and I will buy a new CPU cooler ( I don’t know yet wich one – maybe Corsair CWCH70 or Noctua NH-D14 but I have to see the case first … to be sure there is a plenty of space for those coolers ).
Pls help me with that IOH temperature. It is normal ? What if I intend to make a little OC ( lets say CPU to 3652 Mhz and RAM to 1333 Mhz … but also I will ask for your support ! ) my motherboard will burn ?
If it is necessary I will contact my retailer and send him back the motherboard but … I like MSI a lot.
Thx guys for your support !

Hey guys,
Here is a nice cheap alternative.
Here is my story about the same issue. I found it after looking at why my computer freezes sometimes. Not very often but enough for me to do some investigation. I noticed my IOH temp was a whopping 117 degrees Celsius. lol. Surprised my mobo didn't burn out by now. I wanted to evaluate the situation with the heat sink and decided to take it off. After taking it off I found extremely crusty purple compound on board the chipset and the heatsink. I took me FOREVER to scrape it off. it was almost like a cement which I found odd. After scraping and cleaning the surfaces with alcohol, I placed some silver compound on and proceeded to put it back on.
Well, upon hooking everything back up I was still at 95 to 103 degs. Now I started to really look at the options to replace this. I had SLI config which means I had to do something clever with the southbridge as well. A nice thermaltake chipset solution w/fan and a low profile copper southbridge with shipping was about 45 bucks. Hmm ... This is a sure fix from the threads I have read and its really kid of expensive to fix a simple defect. the problem is not necessarily with the heatsink not being sufficient. Its the combo of the compound used vs the amount of pressure applied between the heatsink and chipset. It was completely unacceptable. I knew this right away when I was watching the temp and then I would press on the top of the IOH heatsink and I would watch it drop another 15 degrees in less then 10 seconds. The springs are extremely weak and not effective at all in transferring the heat from the NB.
Here if my fix. Cost me less than a dollar at the hardware store and it works ideal thus far. Do this at your own risk. Doing this will probably void any warranty too. All my problems are solved and I am running at 57 degrees, YES, 57 degrees with the stock heatsink and no additional cooling.
For one scrape all that old crap off like I did. Apply your new compound. But when you go to replace your heatsink, use the following method. The trick is to use metal screws with a mobo washer, original springs from the plastic studs and a nylon locknut. Use screws that are the same diameter and length (maybe a tad bit longer) as the plastic retainer studs. Also grab a few of those red nylon mobo washers too, were gonna need them as well.
After scraping and applying compound, reassemble as follows. Screw with washer inserted into the back of the mobo so the threads are out front. The plastic/nylon washer is betweeen the screwhead and the back of the mobo as a insulator. Put the heatsink on. With the threads thru the heatsink already, put the springs on and start spinning on the locknut. I torqued the nut down on the spring until the spring almost became fully compressed. The purpose of the spring here is really to prevent you breaking something and at the same time using the max force of the spring since it weak to begin with. Thats why we need to compress it down pretty much all the way. There will be little to no room in the spring at this point. The heatsink at this point should be pretty solid to the board as well. I noticed with the plastic studs before the heatsink would wobble if you gave it a little rocking back and forth before. Not this time. Shouldn't move much if at all. Remember not to torque down too much. You don't want to go beyond the springs compression. Even if you did by accident, its better then not using a spring at all. If you feel that it starts to feel tight when torquing, you torqued too far. Stop an backup a 1/4 turn or so. It is also very important to make sure both torques are equal on both sides as well. Alternate sides when torquing down. I could tell by how much thread I had left on both sides and by looking for any uneven sides.
To summarize, the compound is a problem no doubt. After you resolve the compound issue, its all about the adequate pressure between the heatsink and the IOH. Much like the amount of pressure needed between your CPU and your heatsink give or take. And the pressure that would be as an aftermarket solution like the thermaltake chipset cooler. You dont see cheesy springs on that. Wake up MSI. Simpy using a more effective spring could save MSI some cash in the long run. I envision a leafsprin design like the thermaltake chipset one. The heatsink design could be better, sure, but the design itself is not the problem. Replace the heatsinks if you would like to, if your overclocking and stuff. Funny, this board I have is a refurb too and only had it for a few weeks. Figured they would have done something about it.
Sorry the pics are not the best. Here is about as close as I could get to the finished product

Going on week FOUR of problems with MSI NEO-2-S :/

Mainboard: MSI Neo2-S, BIOS Rev. 1.5x (whatever Live Update sent me)
RAM: GeiL 1GB (512x2) PC-3500 Matched pairs
CPU: P4-2.4c
HD: WD 1200JB Special edition
Cooling: Stock intel, lapped @ 800 grit
PSU: 450W
Video: MSI Geforce 4 TI-4200 64MB
O/S: Windows XP Pro SP1A, IE 6.x latest security patches
DX: Direct-X 9b
BIOS setting: Slow
Overclocking: No, system will not even run stable at rated speeds.
Problem:
System just shuts itself down in the middle of gaming.
CPU temperature has a wide range, depending on how cool the night is and if I have my windows open etc the system can be as low as 40c. Under load while gaming I've seen it go to between 59c-62c.
I've gone into Core Center and turned off the dynamic overclocking so it doesn't adjust speed in the middle of playing games, thinking that might be causing issues.
I've also cranked the fans up all the way in Core Center to increase cooling.
Heck I've even turned Core Center OFF thinking it was messing with my system.
No antivirus is running in the background while I'm gaming. I've fresh installed XP Pro. I've re-applied service packs.
I'm worried about the temperature but I don't necessarily know for certain the sudden shutdowns are a cooling issue.
I am going on week FOUR of problems with this new system. I have never purchased an MSI mainboard and seriously, I have just flat out had it. I've already been through one RMA'd board, I am not RMAing another. I have 3 days left on my newegg account before I am stuck with this MSI, forever. If I can't find a solution ASAP (in 24 hours!) I am returning this MSI board and getting a Gigabyte 8KNXP.
Can anyone help me out here with suggestions please. I'm at my wits end. I've never had to do SO MUCH WORK to get a system running stable. I put my P3 with Intel mainboard together 2.5 years ago and I haven't had ONE single issue.
Stability is a BIG factor for me. I can't even think about overclocking when this sytem won't run at rated speeds!
Chris

This is a different problem.. the first board just flat out died after upgrading the BIOS. I never even got to use it.
This new board upgraded the BIOS just fine but I've been experiencing crashes and shutdowns.
I don't have any spare motherboard or CPU to test it in, and if I did I'd still have to run it for several days..and I don't have several days due in part to me having to dink around with it for so long.
I would say I am in game for 30-60 minutes before I see temperatures that high. Although again I have been playing this same game on my P3-1ghz with the same Video card and never once had a shutdown like this. Never once overheated.
I have all the fancy display/graphics options turned off..I have tested in different resolutions (it makes no difference temperature wise)
I do not know what my core temps are, I can check when I get home and post them if it helps.
I'm running everything at stock speeds. I've noticed Core Center ups my speed slowly from 201x4 to 203x4 etc and so I disabled that and finally flat out took Core Center out of startup. I didn't want it modifying anything while I was playing on the chance it was causing the crashes. Still no change even after that.
The temp does seem a bit high, but I have lapped the heatsink and fan and applied a layer of termal paste (silicon based) to both the HSF and the CPU. I removed that old black pad by scraping it off and then cleaning it with some xylene based carburetor cleaner. I spent several minutes rubbing the black melted parrafin goo off the processor and HSF with a coffee filter. I'm very confident there was little to none left when I applied the new thermal paste.
I don't understand why it runs so hot, nothing is overclocked, I'm running low settings in the game. These temps i'm posting are from Core Center. I have the case OPEN (plenty of ventilation) and I have the windows in my room open to the night air!! (i live in san diego, its cool at night right now) I tried with the case closed also just to be sure and I received the same temperature readings.
None of this makes sense...and after 4 weeks and 500 dollars I'm tired of having to make it sense. It should work right away and that's that.

Having problems with MSI CD-RW 40X12X48X CR40-A2

Bought the 40X12X48X recently and installed into my computer.
Config: (2.5 years old)
P3-700mhz
128mb RAM
Via motherboard
GE-Force 2 MX400 64mb
20GB HDD
WINXP Pro
The MSI worked perfectly fine in reading. I tried burning using NERO onto CD-R, also seems to be quite ok. I spoilt a few discs but i think it's because i burnt at the wrong speed.
However, I have problems with the Re-writable function. I tried formatting the CD-RW blank disk which came in the package with InCD. Halfway through there was an error. After that Windows recognize the CD-RW as a Music disc. Have tried reformatting using InCD and NERO but both times errors occur.
Took a brand new empty CD-RW, and formatted with NERO. THen I tried to copy some data files (picture files jpg about 50mb worth) onto the CD-RW. NERO reported copy successful.
HOWEVER, when i open the CD-ROM, again it is a Music disc with just track 00!!!
I downloaded the firmware upgrade from MSI site, tried to install it, but the program said wrong device! But it can't be wrong device coz i double-check to download the correct program.
I checked the properties of the MSI-CDRW in Windows. Device is working properly .. However i noticed that the driver is provided by Microsfot and the date is July 2001.
I checked my CD box and noticed that manufacturered date of this CD-RW Drive is Sept 2002.
Where can I get the latest drivers? How can I solve my problem?? PLease help... thank u.

I have same problem. Mine always burn at 16x although choose 48x.
Now i know why, it's because i choose DAO/96 instead of DAO.
Finally i can simulate at 48x, only if i choose DAO. I haven't try TAO and writing with DAO yet.
If i'm correct, then it's strange as no one know this??
It shouldn't be hard. Technician should know it??? or ..?

Many problems with MSI Control Center

have a lot MSI mobo
I still P45 & P45 Diamond Memory lover.
the problem of their old dual core center was that sometimes bug "debug assertion failed" came ..
but now I have 5 mobo 1155:
msi Z77
msi b75
msi z68
msi H67
msi h61
in all of these motherboards, the start of the OS, the latest version of control center never keeps the settings that I have saved as a "default"!
for example, the Z77 does not maintain the memory for the fan cpu, while fan1 & fan2 are active, but not to the minimum value that I had memorized ..
the z68 instead only stores the value of the cpu fan
the H67 does not store anything ..
and also the other way!
indicted versions of MSI CC are those where the adjustment of the fans is not only numeric, but also with the graph ..
I seem to recall that older versions of CC II without the graphics did not have so many problems in the management of the fans (but I'm not sure about this)
I do not know if I'm wrong something in the settings of the BIOS, or the software itself!
and I wonder if the ControlCenter has a bug so big, that users do not make a mass protest to the manufacturer directly!
I hope you can help me positively.
I am very disappointed with this software MSI, I would be a little desire to leave my beloved brand ...
thanks
max
p.s. I can understand for the "old" h61/h61, but it is absurd that the Z77 motherboards & b75 does not have control of all the connectors on the PCB Tachometer & PWM ... not to mention the z68 should be the most valuable of all
(as opposed to other manufacturers that optimize much better implementation "fan control")

Quote from: Froggy Gremlin on 05-March-13, 12:39:59
You have been around here long enough to know this is a user to user community and can't do anything about BIOS or S/W problems.
With 16 MSI machines here in the hobby/test room, not one has CC or LU5 on them. For machines I want to control any fans on, I simply install an aftermarket fan controller to do the job. You might try the SpeedFan utility. That seems to be popular.
Talk of jumping brands falls on deaf ears here, and is your choice because of unhappiness with optional S/W.
yes, I have been long enough, but the forums are also used to find solutions ..
maybe some user could answer to me better than you, do not you think?
and this forum is not managed directly by MSI lately?
use a fan controller is not a solution to the problem!
you can not really think that just because you use the external controller.
if MSI creates software with the same problem on all chipsets,
then MSI should fix this software!
otherwise does not produce even, which is less disappointment around.
for my opinion then check the BIOS is much better than using anti-aesthetic Rheobus ..
optional S / W is part of the motherboard itself, while SpeedFan is a third-party utility ... the situation is the same..
I will open a ticket, but it is absurd that MSI does not realize that their own software has this great Bug ..
you say you can not be faulted, and instead I think yes.
especially if you love MSI.
I with 7 Mobo MSI + 6 VGA MSI I can say I devoted customer, and always recommendMSI products to all around..
all software MSI are good, afterburned, video genie, fast boot, and also the ControlCenter II for the management of the cpu and ram is good software!
my anger is that there is only this damn small bug in the software fan control, and I do not understand that the manufacturer and users (inside and outside the forum) do nothing to have a solution!
Quote from: Bernhard on 05-March-13, 14:59:12
Why this sudden realisation that you are missing something on all the MSI boards that you acquired over the years.
Did you ever inform MSI about this at the time that you purchased each and every board ?
the reason is my laziness to contact customer support (and laziness to write here) that I missed until now.
is because with P45 diamond7memory lover Customer Support could not solve the problem.
and because H67 & h61 htpc that are in use a short time
and because z68 erain bench test that used very little time (due to living with my girlfriend) and I have to resell soon.
but now that I have just arrived Z77 & B75 I want to solve this problem.
and if I decided now-finally-maybe I had more important things to do, but now I realized that it is not possible that all boards have bad dialogue with MSI ControlCenter!

Network problems with MSI 790FX-GD70

Hi All
I have a problem with the onboard network cards.
It only works the first time from cold boot (when the powercable is completly disconnected from the PC, and LAN cable disconnected, turn on PC and then connect LAN cable)
If I shut it it down or restart the computer, then the LAN card disconnects, eg no lights active on either the pc nor the router. But if I do the procedure described above everything works ok again.
Same problem occours with both LAN ports.
My system:
MSI 790FX-GD70
AMD 720BE
4GB Corsair 1600mhz DDR3
2x Asus HD4850 Crossfire
2x Samsung t166 320GB HD
Windows XP SP3
Tried 3 different routers but all with the same error. So everything points towards the motherboard.
Please help.
PearsonDK

Quote from: Fredrik on 09-August-09, 06:19:22
If the LAN-card is disconnected I wonder if the LAN-card is "present" at all. Check Deceive Manager. Please give some PSU info. Problematic booting and falling out devices...
Also, please, what is your BIOS Version? Make sure its 1.4 .
Drivers - have you downloaded the latest ones from MSI's site and installed them for the LAN card?
Man.. is it me, or have there been like 6-7 people coming up with similar LAN issues on this board? I've never known an onboard NIC to have issues.

Problems with MSI 6712 KT400 board

I just installed my new KT4V-L motherboard and AMD XP2400+. I used the memory from my old system (Kingston PC-2100, 256MB DDR RAM). The case is Antec w/ 300W power supply. Leadtek GeForce2 MX 400 Video card. Windows 2000, current service pack
After my first boot attempt, the system crashed in BIOS. After this the system would not boot at all. I removed the new components and checked the memory, HD and video on the old system. Everything worked fine.
I reinstalled the new mboard. The system booted up fine, so I skipped BIOS and went to install the drivers. None of the drivers will install properly. They install wizard comes back with the error message: The data is invalid ?(
The system is running, but none of the peripherals are working except keyboard, mouse, and video card.
I checked with Kingston, and they claim that the memory chip is compatible, and has been tested with this system.
Has anyone encountered "The data is invalid"?
Please Help

Thank you all for your helpful suggestions!
First of all, at the recommendation from MSI support email, I did a clean install of Windows 2000. After this all of the drivers loaded properly, and it seemed that everything was working great :D
As I was doing my updates and reloading various software however, I began to experience severe problems with video and was constantly having multiple crashes. ;( I checked the power ratings of my little 300 watt power supply, and sure enough, it doesn't quite measure up to the suggestions in the FAQ post. So, I went and bought a new PSU, an Allied 400 watt. Maybe not the best out there, but it was available and the price was not too bad. Once I got the 400W unit in everything has been running beautifully !!!!
I've got the video settings cranked up to the max, and as yet haven't experienced a single stability issue. BTW- it's only a GeForce2 MX 400, so, we'll see what happens when I upgrade to the GF4. Still a few months away, but all is well for now.
Thanks again
Rocco

Problems with MSI X99S MPower

My setup:
- Corsair Cooling Hydro Series H100i GTX
- Corsair RM850 850W 80 Plus Gold Modular
- G.Skill Ripjaws 4 DDR4 2133 PC4-17000 16GB 2x8GB CL15 Roja
- Gigabyte GeForce GTX 660 OC 3GB GDDR5
- Intel Core i7-5930K 3.5Ghz Box
- MSI X99S Mpower
Here is my problem so far:
At first I thought it might be a ram problem, but after doing a CDOS, I was able to boot with 4 RAM sticks to windows, using my SSD.
However, after I resetted and connected my other two HDDs, the computer doesn't boot.
Now, the computer will only get past the Boot phase if there's no hardrives attached, (Doesn't matter if it's one of the empty ones, or the SSD, or another HDD from another computer with windows in it that works)
I wont even get into the splashscreen!
I am unsure as to what might be causing this problem or how to solve it, I am not tech savy, and honestly, after the problems last computer gave me, I thought my bad luck was out and than building this one would be a breeze!
I suspect the MOBO might be defective, since it's weird that it gets past bootphase alright, but doesn't accept any SATA devices.
I tried to change the cable 3 times, (PSU one, and SATA cable) even to a different version that didn't come with the MOBO, I also tried two hardrives, an SSD and an HDD but neither will let me get to splashscreen if connected to the Motherboard.
I need all the help I can get! Thank you!

Quote from: david.domingo.xammar on 05-April-15, 01:47:29
Not sure how I update that SSD Firmware thingie
Due to problems with 840 EVO Samsung released Samsung SSD 840 EVO Performance Restoration Software, it will also update firmware:
http://www.samsung.com/global/business/semiconductor/minisite/SSD/downloads/software/Samsung_Performance_Restoration_V11.zip
On which bios version is the board?

Boot problem with MS-6712 (KT4AV) motherboard

Hi guys!
I need a help with my MSI computer configuration.
My current computer configuration:
processor: Barton 2500+
motherboard: MS-6712 KT4AV
graphic card: ASUS v9520-X/TD/128Mb
HDD: Maxtor 40Gb
RAM memory: 512Mb no name DDR1 RAM
CD/DVD: DVD RW -LG Supermulti
Power supply: RexPower PX-450 (Made in China)
operating system: Windows XP sp2
Before few days, i changed my old graphic card (GeForce 2 MX400) to ASUS v9520 128Mb, and old AOpen 52x CD to LG DVD/RW supermulti. Everything was working well, windows xp working well, until today after my computer doesn't want to boot Win XP(windows could not start because the following file is missing or corrupt. c:Windows\system32\config\system). I try to change boot settings in BIOS and start system from bootable windows XP CD, but my system doesn't allow me to boot from CD.
My current BIOS settings are:
Primary IDE master: HD-DT-STDVD
Secundary IDE slave: Maxtor 6LO40J2
and in boot sequency: 1st CD/DVD; 2nd: IDE-0:Maxtor; 3rd: floppy
I don't know where is a problem. Thanks in advance for all your responces.
Kind regards from Dragan.

Quote from: Wonkanoby on 02-July-09, 02:00:03
first thought is whats powering this
Thanks Wonkaoby for your fast response.
I forgot to wrote power supply.
It is RexPower PX-450 (Made in China). But I hadn't any problem with power supply before. Thing which is concerning me is no possibility of boot-ing system from Windows XP bootable CD i.e. set up my computer to boot from CD/DVD.

Problem with msi pt8 neo-v and sata drive

hi, i have a hitachi 80gb sata2 drive( its configured to work as sata1 to work properly on the motherboard) and the msi pt8 neov motherboard, the problem is that the transfer mode is showing incorrectly on hdtune and everest plus it doesnt give the features right, like shown in the image below. everytime i open hdtune gives me a different transfer mode and features get ticked/unticked.
ive tried the disk on another pc i have and it shows info correctly so it cant be the hard drive, what could be causing this?
i have installed the hyperion 5.13a drivers and tried too with the microsoft drivers, still the same.
hope someone can help me out as is driving me crazy!
oh one last question, in bios settings i see the sata drive( just using one) as bbs-0(raid) HDS728080pla380 why is that? ive tried disabling "bootrom function" under Sata controller but then it wont recognize it, is there a way to change this??

Quote from: duhast1 on 13-October-07, 06:28:13
SATA Transfer mode, it changes everytime i open hdtune AND features get ticked unticked everytime i open hdtune as well, like if transfer mode was changing constantly
Unless, you use your disk purely to benchmark, your transfer rates will dynamically change. As data is written to drive or removed.........
Everything is working fine

Overheating problem with msi pm8m3-v

hi,i just built a new p4 ht pc with the msi pm8m3-v motherboard.cpu is a intel pentium 4 3.00ghz,socket 775 lga(prescott i believe).here is the heatsink i use.everything was running great up until i decided to put new thermal paste on it,cause it looks to be running hot from the stock paste that came attached to the bottom of the heatsink.after that,i tryed to boot it up,and it would almost instantly shut down.barely enough time to get into the bios.one time i got in and checked how hot the cpu was,and it was running around 200 f! :shocked_anim:i put enough paste on there i thought.covered both the top and bottom with a thin coating like it says.the thermal paste i got was cheap stuff from the computer store.(white paste)you would think it would work if they sell it.lol.
once i put the heatsink on,am i supposed to wait 200 hours or something,like i heard before i turn it on?i also got weird errors saying my second ide slot does not have a 80 pin cable connected to it???what the hell is that?i just dont understand what happened.one more thing,is it normal for the heatsink to kind of warp the motherboard?when i had it fully tightened it would do that.

Retail version. All the info is here------> http://www.msi.com.tw/program/products/mainboard/mbd/pro_mbd_detail.php?UID=712
As for the IDE cable problem, try different cable. Optical drivers do not need 80 pin cables and I still use 40 pin cables without problem of loss of data transfer. 80 pin cables are only really needed on UDMA 66/100/133
Would help, if you could list components and PSU details.......... would def speed up process of finding a solution for you.

Problems with MSI K9N6PGM2-V2 Motherboard in a barebone package

Similar Messages

Maybe you are looking for