Problems with MSS on "Recruitment option"

hi
My "Recruitment Option" on the MSS is not enabled.
http://img192.imageshack.us/img192/8100/recruitment1.jpg
Whichever option inside the "Recruitment option" you try you always have the following message error:
http://img25.imageshack.us/img25/3082/recruitment2.jpg
http://img41.imageshack.us/img41/3963/recruitment3.jpg
What "Options" need the Recruitment for run correctly?
thanks

Hi Stuart
I see in my service SICF tcode bsp hrrcf_c_request_browser (This is the BSP is the Recruitment of the MSS option) is active
http://img51.imageshack.us/img51/7716/recruit1.jpg (You see the bsp active)
http://img248.imageshack.us/img248/4686/recruit2.jpg (The error in bsp when "Test Service")
Which values should have QBW_004? (Is The RFC Destination mandatory?, in my SAP System does not have the QBW_004 RFC Destination)
thanks for your posts and helps
Ivan

Similar Messages

Problem with MSS Launchpad

Hello folks,
We are facing some problem with MSS Launchpad after the service pack, we have checked sicf, lpd_cust and done most of the troubleshooting steps,reached to point where we found table T77MWBFCD and changed the URL value here, launchpad worked but the URL which we want to work and which was working fine in the past has stopped working.
Any help will be appreciated.

Hi everybody,
finally we managed to fix this bug on our own.
We set up the Managers Desktop (MDT) as suggested by SAP. But the MDT's reports could not be converted to the launchpad.
Then we recognized via debugging that for any reason the following entries were missing in table FPB_LP6_SNI_REQ:
- Role ROLE C 3 MSS
- Instance INSTANCE C 3 REP
Adding these entries manually fixed the problem.
Regards,
Dennis Bohlmann

Compilation problem with templates while using option -m64

Hi,
I have compilation problem with template while using option -m64.
No problem while using option -m32.
@ uname -a
SunOS snt5010 5.10 Generic_127111-11 sun4v sparc SUNW,SPARC-Enterprise-T5220
$ CC -V
CC: Sun C++ 5.9 SunOS_sparc Patch 124863-01 2007/07/25
Here is some C++ program
############# foo5.cpp #############
template <typename T, T N, unsigned long S = sizeof(T) * 8>
struct static_number_of_ones
static const T m_value = static_number_of_ones<T, N, S - 1>::m_value >> 1;
static const unsigned long m_count = static_number_of_ones<T, N, S - 1>::m_count + (static_number_of_ones<T, N, S - 1>::m_value & 0x1);
template <typename T, T N>
struct static_number_of_ones<T, N, 0>
static const T m_value = N;
static const unsigned long m_count = 0;
template <typename T, T N>
struct static_is_power_of_2
static const bool m_result = (static_number_of_ones<T,N>::m_count == 1);
template <unsigned long N>
struct static_number_is_power_of_2
static const bool m_result = (static_number_of_ones<unsigned long, N>::m_count == 1);
int main(int argc)
int ret = 0;
if (argc > 1)
ret += static_is_power_of_2<unsigned short, 16>::m_result;
ret += static_is_power_of_2<unsigned int, 16>::m_result;
ret += static_is_power_of_2<unsigned long, 16>::m_result;
ret += static_number_is_power_of_2<16>::m_result;
else
ret += static_is_power_of_2<unsigned short, 17>::m_result;
ret += static_is_power_of_2<unsigned int, 17>::m_result;
ret += static_is_power_of_2<unsigned long, 17>::m_result;
ret += static_number_is_power_of_2<17>::m_result;
return ret;
Compiation:
@ CC -m32 foo5.cpp
// No problem
@ CC -m64 foo5.cpp
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 36: Where: While specializing "static_is_power_of_2<unsigned long, 16>".
"foo5.cpp", line 36: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 37: Where: While specializing "static_number_is_power_of_2<16>".
"foo5.cpp", line 37: Where: Specialized in non-template code.
"foo5.cpp", line 20: Error: An integer constant expression is required here.
"foo5.cpp", line 43: Where: While specializing "static_is_power_of_2<unsigned long, 17>".
"foo5.cpp", line 43: Where: Specialized in non-template code.
"foo5.cpp", line 26: Error: An integer constant expression is required here.
"foo5.cpp", line 44: Where: While specializing "static_number_is_power_of_2<17>".
"foo5.cpp", line 44: Where: Specialized in non-template code.
4 Error(s) detected.
Predefined macro:
@ CC -m32 -xdumpmacros=defs foo5.cpp | & tee log32
@ CC -m64 -xdumpmacros=defs foo5.cpp | & tee log64
@ diff log32 log64
7c7
< #define __TIME__ "09:24:58"
#define __TIME__ "09:25:38"20c20
< #define __sparcv8plus 1
#define __sparcv9 1[snipped]
=========================
What is wrong?
Thanks,
Alex Vinokur

Bug 6749491 has been filed for this problem. It will be visible at [http://bugs.sun.com] in a day or two.
If you have a service contract with Sun, you can ask to have this bug's priority raised, and get a pre-release version of a compiler patch that fixes the problem.
Otherwise, you can check for new patches from time to time at
[http://developers.sun.com/sunstudio/downloads/patches/]
and see whether this bug is listed as fixed.

Can you help with technical problems with the stereo imagry option

can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3'

Because this forum software is so absolutely USELESS now, you don't get to see the whole of the question in this view. In the other (non-list) view it says:
"can you help with a technical problem with the stereo imagery option ? it won't take out lead vocal in a stereo mp3"
And the answer is that if you can't isolate the vocal in the stereo field, or it is one of these odd ones where it's used inverted polarity in different parts of the stereo signal for the same vocal, then you won't be able to. But without a sample, it's impossible to tell. If you can post a link to one, that might help. It has to be external to this site though - Adobe in their infinite wisdom don't allow the posting of audio files on their audio U2U forum. Helpful, that, isn't it?

Problem with MSS 60.1.5 package (R/3 4.7 as backEnd)

Hi All
I'm try to using
Package MSS 60.1.5 (JSP, BSP, ITS [No WebDynpro])
BackEnd R/3 4.7 on WebAS 6.20
FrontEnd Portal 6.0 SP14
I have the error from application iView, when I log
in portal, like this
"Could not connect to the R/3 System"
as the link
Configuring MSS 60.1.5
Can someone help Me
Thanks in Advance
Dom

Hi,
This can be caused by several problems:
- is the WP-PI installed on the R3 side?
- make sure that all your system properties are configured corerctly
- if you are using User Mapping - make sure the mapping is correct (try using upper case letters, maybe)
- there is a nice tool for testing connection to back-end system. go to the PortalAnywhere.Go page and search for 'Connector Test' - with this tool you will be able to eliminate connection problems.
Hope it will help you,
Aviad

Problem with jax-ws and optional attributes

Hello,
I'm developing some web services, starting by defining the object model in schemas, then doing WSDL first to define the services.
I've come across a problem that appears to be caused by jax-ws not properly handling optional attributes. I've tried this with both 2.0 and 2.1ea3 and both fail the same way.
I created a simplified test case to repeatably demonstrate the problem.
The type definition for the object looks like this :
<xsd:complexType name="TestObject" >
<xsd:attribute name="name" type="xsd:string" use="required"/>
<xsd:attribute name="subId" type="xsd:integer" use="optional" />
</xsd:complexType>
And in the wsdl:
<wsdl:message name="testRequest">
<wsdl:part name="testrequest" type="mf:TestObject"/>
</wsdl:message>
<wsdl:operation name="testAction">
<wsdl:input name="testRequest" message="mf:testRequest"/>
<wsdl:output name="successResponse" message="mf:successResponse"/>
</wsdl:operation>
and the test code:
public void testOptionalAttrs()
TestObject testObj = new TestObject();
testObj.setName("testName");
//testObj.setSubId(2);
MDSProvisioningResourcePortType resourceManager = factory.getGatewayResourceManager();
boolean success = resourceManager.testAction(testObj);
Running the test code with the 'setSubId' uncommented works.
With the 'setSubId' call commented out out results in this error:
javax.xml.ws.WebServiceException: javax.xml.bind.MarshalException
- with linked exception:
[com.sun.xml.bind.api.AccessorException: java.lang.NullPointerException]
 at com.sun.xml.ws.message.jaxb.JAXBMessage.writePayloadTo(JAXBMessage.java:301)
 at com.sun.xml.ws.message.AbstractMessageImpl.writeTo(AbstractMessageImpl.java:124)
 at com.sun.xml.ws.encoding.StreamSOAPCodec.encode(StreamSOAPCodec.java:91)
 at com.sun.xml.ws.encoding.SOAPBindingCodec.encode(SOAPBindingCodec.java:225)
 at com.sun.xml.ws.transport.http.client.HttpTransportPipe.process(HttpTransportPipe.java:121)
 at com.sun.xml.ws.transport.http.client.HttpTransportPipe.processRequest(HttpTransportPipe.java:69)
 at com.sun.xml.ws.api.pipe.Fiber._doRun(Fiber.java:541)
 at com.sun.xml.ws.api.pipe.Fiber.doRun(Fiber.java:497)
 at com.sun.xml.ws.api.pipe.Fiber.runSync(Fiber.java:392)
 at com.sun.xml.ws.client.Stub.process(Stub.java:213)
 at com.sun.xml.ws.client.sei.SEIStub.doProcess(SEIStub.java:120)
 at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:238)
 at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:212)
 at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:103)
 at $Proxy58.testAction(Unknown Source)
 at com.qualcomm.mf.prov.ProvisioningGatewayClientFactoryTest.testOptionalAttrs(ProvisioningGatewayClientFactoryTest.java:118)
 at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
 at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
 at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
 at java.lang.reflect.Method.invoke(Unknown Source)
 at org.junit.internal.runners.TestMethodRunner.executeMethodBody(TestMethodRunner.java:99)
 at org.junit.internal.runners.TestMethodRunner.runUnprotected(TestMethodRunner.java:81)
 at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
 at org.junit.internal.runners.TestMethodRunner.runMethod(TestMethodRunner.java:75)
 at org.junit.internal.runners.TestMethodRunner.run(TestMethodRunner.java:45)
 at org.junit.internal.runners.TestClassMethodsRunner.invokeTestMethod(TestClassMethodsRunner.java:71)
 at org.junit.internal.runners.TestClassMethodsRunner.run(TestClassMethodsRunner.java:35)
 at org.junit.internal.runners.TestClassRunner$1.runUnprotected(TestClassRunner.java:42)
 at org.junit.internal.runners.BeforeAndAfterRunner.runProtected(BeforeAndAfterRunner.java:34)
 at org.junit.internal.runners.TestClassRunner.run(TestClassRunner.java:52)
 at org.eclipse.jdt.internal.junit4.runner.JUnit4TestReference.run(JUnit4TestReference.java:38)
 at org.eclipse.jdt.internal.junit.runner.TestExecution.run(TestExecution.java:38)
 at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:460)
 at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.runTests(RemoteTestRunner.java:673)
 at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.run(RemoteTestRunner.java:386)
 at org.eclipse.jdt.internal.junit.runner.RemoteTestRunner.main(RemoteTestRunner.java:196)
Caused by: javax.xml.bind.MarshalException
- with linked exception:
[com.sun.xml.bind.api.AccessorException: java.lang.NullPointerException]
 at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:255)
 at com.sun.xml.bind.v2.runtime.BridgeImpl.marshal(BridgeImpl.java:64)
 at com.sun.xml.bind.api.Bridge.marshal(Bridge.java:105)
 at com.sun.xml.ws.message.jaxb.JAXBMessage.writePayloadTo(JAXBMessage.java:292)
 ... 35 more
Caused by: com.sun.xml.bind.api.AccessorException: java.lang.NullPointerException
 at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:224)
 at com.sun.xml.bind.v2.runtime.XMLSerializer.reportError(XMLSerializer.java:239)
 at com.sun.xml.bind.v2.runtime.ClassBeanInfoImpl.serializeAttributes(ClassBeanInfoImpl.java:302)
 at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:661)
 at com.sun.xml.bind.v2.runtime.BridgeImpl.marshal(BridgeImpl.java:111)
 at com.sun.xml.bind.v2.runtime.CompositeStructureBeanInfo.serializeBody(CompositeStructureBeanInfo.java:71)
 at com.sun.xml.bind.v2.runtime.CompositeStructureBeanInfo.serializeBody(CompositeStructureBeanInfo.java:19)
 at com.sun.xml.bind.v2.runtime.XMLSerializer.childAsXsiType(XMLSerializer.java:663)
 at com.sun.xml.bind.v2.runtime.MarshallerImpl.write(MarshallerImpl.java:250)
 ... 38 more
Caused by: com.sun.xml.bind.api.AccessorException: java.lang.NullPointerException
 at com.sun.xml.bind.v2.runtime.reflect.AdaptedAccessor.get(AdaptedAccessor.java:33)
 at com.sun.xml.bind.v2.runtime.reflect.TransducedAccessor$CompositeTransducedAccessorImpl.print(TransducedAccessor.java:199)
 at com.sun.xml.bind.v2.runtime.property.AttributeProperty.serializeAttributes(AttributeProperty.java:61)
 at com.sun.xml.bind.v2.runtime.ClassBeanInfoImpl.serializeAttributes(ClassBeanInfoImpl.java:295)
 ... 44 more
Caused by: java.lang.NullPointerException
 at org.w3._2001.xmlschema.Adapter3.marshal(Adapter3.java:23)
 at org.w3._2001.xmlschema.Adapter3.marshal(Adapter3.java:1)
 at com.sun.xml.bind.v2.runtime.reflect.AdaptedAccessor.get(AdaptedAccessor.java:31)
 ... 47 more
So am I missing something or is jax-ws not handling optional attributes correctly?
Thanks,
Hank

Hi,
This is not a direct answer to your question. But if you want to build restful web services with Weblogic 10.3, why not use Jersey . It is the implementation of the new JAX-RS spec. In my experience, although Jersey is part of the Java EE 6 spec, it appears to work ok with Java EE 5 container like Weblogic 10.3.1. The [JAX-RS section of Java EE tutorial|http://java.sun.com/javaee/6/docs/tutorial/doc/giepu.html] is another good source of example code.
Edited by: vamsee2 on Sep 25, 2009 12:38 PM

Problem with SCORM 1.2 option

I am using Captivate 8, I bought a licence. When I save my file, to be exported to my LMS, using the SCORM 1.2 options, the file, named imsmanifest.xml, contains an error in the code. So the LMS is not able o read it correctly. I requested the solution to my LMS, that is LITMOS, nd they said to me that the problem is on Captivate and that they have other clients with the same problem. Please can you help me to solve this issue?
Best Regards. Gaetano

Manifest files are pretty straightforward, in general (except when you get into deep sequencing rules). Any clue as to what it is saying the error involves?
Could be something simple.
I had an issue with sumtotal a few years back, with scorm 2004 manifests.
There is an item in the manifest where you declare which scorm spec is being followed, and for that particular version of sumtotal, it expected the manifest to say "scorm 1.3" instead of "scorm 2004".
Mind you, they both refer to the same set of standards but that simple change (which I made using notepad) solved my dilemma.
But I agree with Rod, and scorm cloud is my benchmark for testing always.
Hope that helps and if you want a second set of eyes on the manifest file, I'd be happy to take a look.

Problem with model trying several options (import,compare)

Hi all,
I have a problem in one of my models,
When I try to import fromdata dictionary or when I try to compare/merge with other models (i had no test other options)
I 'm gettint diferent errors :
Import from data dictionary;
2012-08-06 14:26:44,638 [main] INFO DataModelerAddin - Oracle SQL Developer Data Modeler 3.1.1.703
2012-08-06 14:27:32,183 [Thread-31] ERROR ModelChooserDialog - Error in Compare status
java.lang.NullPointerException
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addDeletedFKAssociation(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addTableDetails(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addTable(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addFromSourceModel(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.<init>(Unknown Source)
 at oracle.dbtools.crest.swingui.compare.CompareModelsDialog.<init>(Unknown Source)
 at oracle.dbtools.crest.swingui.compare.CompareModelsDialog.<init>(Unknown Source)
 at oracle.dbtools.crest.swingui.compare.ModelChooserDialog$OKAction$1.run(Unknown Source)
compare/merge;
2012-08-06 14:16:51,458 [Thread-50] ERROR DBMExtractionController - Error Generate Design: DB_POST
java.lang.NullPointerException
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addFK(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addTableDetails(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addTable(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.addFromSourceModel(Unknown Source)
 at oracle.dbtools.crest.model.design.compare.CompareModelToModel.<init>(Unknown Source)
 at oracle.dbtools.crest.swingui.compare.CompareModelsDialog.<init>(Unknown Source)
 at oracle.dbtools.crest.swingui.compare.CompareModelsDialog.<init>(Unknown Source)
 at oracle.dbtools.crest.imports.metadata.DBMExtractionController$Runner.run(Unknown Source)
 at java.lang.Thread.run(Thread.java:619)
I can do the same operations with other models in the same application, for this reason I guess the problem is in the model and not in the tool,
please, could anyone help me?
Version: 3.1.1.703
Thanks in advance and Regards

Hi Philip,
I finally could solve the problem,
one FK in the model was in strange status, I could not drop the foreign key, the DELETE function on the menu was not working for this object,
I have dropped from the folder the xml of this object and I have deleted from objects.local in the "rel" directory the reference to this object.
after that I'm able again to use the model,
for more information I have to add that the FK was duplicated, I mean, two FK with the same name and one of them I could view the properties and I could drop it from the model but the other one I couldn't until I drop the xml,
Thanks anyway for your help and I guess this problem comes from a SVN conflict or something related to control version,

Problem with mencoder's oac option

I am having difficulty using mencoder to record output from a tv capture card. Specifically it gives me an error that I have not specified a -oac option for the audio codec, however I have (and yes I have checked that the codec is enabled). It also gives me the same error if I choose the -nosound option. I am hoping that another Arch user out there can help me out with this. Here is sample of the problem.
[alex@espc3 ~]$ /usr/bin/mencoder tv:// -tv driver=v4l2 width=360 height=288 outfmt=yuy2 input=0 device=/dev/v4l/video0 norm=NTSC chanlist=us-cable channel=3 adevice=/dev/dsp -oac mp3lame -lameopts cbr:br=256:mode=0 -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=1600 -ffourcc divx -o test.avi
MEncoder 1.0pre6-3.4.3 (C) 2000-2004 MPlayer Team
CPU: Intel Pentium 4/Xeon/Celeron Northwood (Family: 8, Stepping: 4)
Detected cache-line size is 64 bytes
CPUflags: Type: 8 MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2
File not found: 'frameno.avi'
Failed to open frameno.avi
success: format: 9 data: 0x0 - 0x0
TV detected! ;-)
Selected driver: v4l2
name: Video 4 Linux 2 input
author: Martin Olschewski <[email protected]>
comment: first try, more to come ;-)
Selected device: BT878 video (Hauppauge (bt878))
Tuner cap:
Tuner rxs: LANG1 LANG2
Capabilites: video capture video overlay VBI capture device tuner read/write streaming
supported norms: 0 = PAL; 1 = NTSC; 2 = SECAM; 3 = PAL-Nc; 4 = PAL-M; 5 = PAL-N; 6 = NTSC-JP; 7 = PAL-60;
inputs: 0 = Television; 1 = Composite1; 2 = S-Video; 3 = Composite3;
Current input: 0
Current format: YUV420
v4l2: current audio mode is : LANG1
[V] filefmt:9 fourcc:0x32315659 size:640x480 fps:25.00 ftime:=0.0400
No audio encoder (-oac) selected. Select one (see -oac help) or use -nosound.
Exiting...
Alex

Problem solved!!
It turns out that mencoder freaks out at spaces in the -tv options. Replacing the spaces in the -tv options with :'s solves the problem.
Alex

Problem with MSS

Dear SDN,
I am running MSS 60.1 and I am trying to troubleshoot the iviews. I just installed the BP and created the connection to r/3 (4.7). The connection seems to be fine. I can see the "team overview iview" but ALL other iviews give a runtime error.
It goes something like this
Access denied (Object:com.sap.portal.system/security/com.sap.portal.ep50/ep50_safety)
See details in the exception ID log file
Where can I find this "exception ID log file"
Anyone have problems like this?
Thanks
Jeremy

com.sap.portal.system/security/com.sap.portal.ep50/ep50_safety refers to the security zone. You need to enable end-user permission on ep50_safety security zone. Go to System Admin > Permissions > Security Zone and open this object, add MSS portal role or any role that MSS is part of to the list, and check the Enable box. When you do that, portal may warn you that you are breaking the permission inheritance, just go ahead and accept that since that is what you want.
Hope this help.

Problem with bank details and option in pay method

I cannot log in with my account with app id because in my country si not an option with maestro card. What should i do?

If Maestro cards are not shown as an option on the payment details screen then you won't be able to use it - do you have one of the options that is shown ?
If not then are iTunes gift cards available in your country ? They are not available in all, and they are country-specific (they can only be redeemed and used in their country of issue).
It they aren't then you could create an account with 'none' as the payment option which will alloy to download free items : http://support.apple.com/kb/HT2534

I have a problem with the private browsing option. In my firefox settings it says I'm in private browsing mode, but firefox still remembers all of my history.

In the options menu, I changed my settings to never remember history, but firefox still records all of it in the history tab. I repeated this, setting it back and forth between remember and don't remember and it still always recorded it.

Did the Flash plugin crashes also happen with a previous version (10.1) of the Flash player?
If you have submitted Breakpad crash reports then post the IDs of one or more Breakpad crash reports (bp-xxxxxxxx-xxxxxxxxx-xxxx-xxxxxxxxxxxx). 
You can find the IDs of the submitted crash reports on the about:crashes page. 
You can open the about:crashes page via the location bar, like you open a website.
See:
* http://kb.mozillazine.org/Breakpad (Mozilla Crash Reporter)

Problems with British/USA keyboard options

Okay, so I am using InDesign CS4.
I just got a new computer, and it's an HP (windows 7)
I have my keyboard set to USA English, and in all other programs, when I hit shift+2, I get the @ symbol...
In InDesign, though, it selects the British Option, in the cae of the Sift+2, I get quotation marks instead. Or, if I do Sift + 3, I should get a #, but I get the GBP symbol instead.
How do I change this? This problem only occurs in InDesign, and no other programs.
Thanks!

There's a link at the bottom of the email to bring you back to the page. If you are logged in you should see buttons to mark an answer as helpful (you can mark 2) or Correct (only 1) and that gives the points. Can't take them back, though, so be careful.
There's also a link up at the top to mark the question "answered."

Problems with email set-up option 2 selected when option one needed ie add an email personal

Hello All,
My new 8520 arrived yesterday, I ask my daughter to set it up for me as she has one. Everything was going ok until I think she pressed the option for email as if I had a work email address which i dont i think option one should have been pressed ie add new email/personal home user email. I cannot seem to get back to that option all I get is has your blackberry admin given user name/number etc.
Also on the setup box the only icons I have are set-up wizard set up wi-fi and set up bluetooth. Can anyone help me out please, do I need to reset-phone to factory settings or something??
Thanks
Jason

Hi and Welcome to the Forums!
Please do this:
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
After the boot-up, you should be able to again freshly launch the email setup wizard. If you are only presented with Enterprise, then you need to contact your carrier to ensure that you have the proper data account on your BB to enable the services you desire:
http://www.blackberryfaq.com/index.php/What_do_I_need_a_Data_Plan_for%3F
Best!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Display problems with print commands and options

What fonts are required to be installed in windows for Reader X to display all of its component parts? My fonts were cleaned out and now the print selection screen only displays a blank image with no letters or buttons. It would be nice not to have to reinstall 1000 fonts just to find the right ones.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Problems with MSS on "Recruitment option"

Similar Messages

Maybe you are looking for