Problems with Multi Track Audio Recording

I'm having difficulties getting Logic to record multiple audio tracks. Basically, I'm using a MOTU 896HD Firewire Interface and despite setting up audio objects in the environment window to receive from the relevant inputs and assigning those to tracks it doesn't seem to allow for each wave of audio to be recorded separately.
Last night I was trying to record 4 tracks - 2 vox and 2 guitars and had no luck. On the first two tracks it was recording identical waves with both vox and guitar together of one musician. And for tracks 3 and 4 it was recording the vox and guitar of the same musician in each track, like it should have done in tracks 1 and 2. It did not record the other musician's parts at all ignoring him altogether. I just don't understand because I tested each mic and guitar to check whether it was in fact receiving audio from the source and it worked fine when getting levels but when it came to recording everything messed up.
Can any of you kind people help me? I'm obviously doing something very wrong but cant for the life of me understand.....all thoughts will be greatly appreciated.
MacBook   Mac OS X (10.4.6)   2GHz, 1GB RAM, 60GB - primary use is music making with Logic Pro

Just thought I would let anyone who's reading this
topic know that I have resolved my issue, it was to
do with the Audio Configuration of Logic to the
inputs from the MOTU. I went to Logic>Audio>Audio
Configuration and configured it so that each track
received from the respective inputs.
You might want to mark the thread as "Answered".
This will let anyone with the same problem know
they might find there answer here. RIght now the
thread is listed as "Unanswered". To do this click on
the answered link at the top of the thread.

Similar Messages

  • Multicam editing with multi-track audio?

         Does anyone know how to do multicam editing with multi-track audio?  Apparently, the multicam editor can only see Audio Track #1 in the Source Sequence.  I tried mixing my original audio tracks #1, #2, and #3 (submixes) to the master audio track in the Source Sequence and if I listen to the new Multicam Sequence (the nested Source Sequence) all 3 original audio tracks are there (combined), but when I go to do the multicam edit in the multicam monitor window, I"m back to just Audio Track #1 of the Source Sequence and audio tracks #2 and #3 are missing ???  Thanks for your help!

    I have run the gambit of different techniques. The one that is most efficient is listed in Colin Brougham's response number 9
    There's a far easier way to do this: after you sync your angles, hold down Alt/Opt and select or lasso just the video portions of the clips, and nest those. The audio stays put, but the video moves into the nest, and you can then enable Multicam on the nested sequence.
    One of the best things about this is that it circumvents Premiere Pro's totally BS "Render Required Files" nonsense.
    I must admit the ALT lasso tip was one of the best features I have seen. Like a revelation when I discovered it some months ago while watching a tutorial about something not related. As far as the "Rendering required files" That was kicking my but for a while doing multicam editing. If you do edit both audio and video in multicam you might find the "Rendering required files" issue. Basically the problem stems from having a lot of cuts to process at the same time both audio and video. 1080P is a huge amount of data when you multiply it by four cameras plus multiple audio cuts and effects ,(audio gain, Deessing etc.) So Pre-rendering the audio by clicking in the main sync timeline and then at the top Click Sequence/Render Audio.This takes care of the issue when you are cutting multiple tracks at once. It is a good practice to work from a main sync sequence and then copy that to a new sequence  preserving the main sequence as unchanged. I found the solution is to "render audio" only in the master sync sequence this will then pass through to all subsequent copies that are made "downstream" allowing you to easily clean up anything. If you make a mistake you can always start from the main sync sequence and not lose too much time. Takes a little bit of time to render but once that is done you can cut all tracks video and audio like butter. I have been doing a lot of 1080p multicam editing over this past year and had quite learning curve. Most of the work I do is multicam editing by choice it is much faster for me to edit this way because I am used to working in live events where we need to look at all shots at the same time make a "best choice" and keep rolling. Have fun with it!

  • Multi track audio recording with ipad air

    Are there users of ipad air with a usb connecting adaptor and a usb audio device making multi track recordings?  I have had limited success doing this with my previous generation ipad and am wondering about the stability of eight-track recording on the ipad air. 

    Just thought I would let anyone who's reading this
    topic know that I have resolved my issue, it was to
    do with the Audio Configuration of Logic to the
    inputs from the MOTU. I went to Logic>Audio>Audio
    Configuration and configured it so that each track
    received from the respective inputs.
    You might want to mark the thread as "Answered".
    This will let anyone with the same problem know
    they might find there answer here. RIght now the
    thread is listed as "Unanswered". To do this click on
    the answered link at the top of the thread.

  • Need help with multi track/simultaneous recording

    Please forgive me if the answer to my question has already been covered; I have searched the other posts but haven't been able to find the answer.
    I am recording a podcast with a Behringer Xenyx X1832 mixer. In GB I know how to select "multi track recording" and set my two mics that are conneced to the first two channels of the mixer to "mono 1" and "mono 2" on the input source.
    My question is how do I record audio from my Macbook on a seperate track?
    I have a Focusrite 2i2 connected via USB to the Macbook acting as an output, then TRS cables from the outputs going to channel 7/8 on the mixer. When I play audio I can hear it perfect and adjust EQ and volume, but I am unable to record it on a seperate track on GB.
    When I click on the track on GB, the input source says "stereo 1/2" and when I try to click the red buttons to arm the other two mono tracks where my mics are connected it says "The input channel of this track is already in use. To record on this track, choose another input channel."
    What am I doing wrong? How do I send audio from the Macbook to the mixer and then record it on a seperate track, along with seperate tracks for each of the mics?

    You need to create an aggregate device:
    http://support.apple.com/kb/HT1215

  • Live Multi-Track Audio Recording in FCP

    I was wondering if someone can tell me if this is possible. I have a single camera running into FCP for a live event. I have multiple room mic setup going into a Firwire Audio Interface (MOTO 828), I want to record the Video from the camera and the audio from the Firewire interface. The end product should be a single track of video with 8 tracks of audio, in sync.
    I think this can be done by setting up my default audio input device as the firewire interface and capturing the video as I would normally do.
    Can someone verifiy this???
    Thanks

    My experience has been a little different.
    For instance, if clients bring in material that they only happen to have on DVD (which they own of course - I'm no pirate - ARRR) I will often capture it through our AJA Io. In this case, the XLR inputs on the Io do not allow me to adjust for the low line level coming from the DVD player, and so I use the Mac's Built-in audio input to take an aux input from my mackie mixer which allows me to boost the level. I set this up in FCP by simply starting from my regular AJA easy setup and changing the audio input source.
    So that's firewire video input and built-in analog input, but I have also had success using two separate Firewire devices. In this case, I have a Sony HDV deck which only supports FW deck control. I want to capture Uncompressed SD through the Io, for which I must use the analog connections from the deck. I connect the Io normally via firewire, and connect a second firewire cable to the deck, running the analog outs from the deck to the Io. I start once again with my Io easy setup, then change the device control to FW DV. The video comes in through the Io's FW, and the deck control happens on the other firewire connection.
    Now this is my funky workaround I cam up with by playing mad scientist in my lab, and though it has worked for me, that doesn't mean it will work for anyone else. Also, my particular combination of gear happens to allow this, but other variables here might give different results. Using the AJA Io is what is making this work for me here, and I wouldn't be surprised if it did not work with your audio interface, trying to capture media over both connections to one file. However, try it and see - and make sure you select "capture video and audio to separate files" as I would expect this to be the only way this could work. Standard FW capture expects there to be video and audio in the same stream, and needs it to be that way to capture into a single file.
    Good luck!

  • Export ISO info with multi track audio

    Hi, Need help with the exporting of multi channel file. I have one video track & 32 audio tracks. Apart from the original rest are translation tracks so I want to find a way to be able to add ISO information for each track so that information is saved within the file while exporting.
    Exporting it in XDCAM HD 4.2.2.
    Can someone kindly help?
    Many Thanks in advance.

    Just thought I would let anyone who's reading this
    topic know that I have resolved my issue, it was to
    do with the Audio Configuration of Logic to the
    inputs from the MOTU. I went to Logic>Audio>Audio
    Configuration and configured it so that each track
    received from the respective inputs.
    You might want to mark the thread as "Answered".
    This will let anyone with the same problem know
    they might find there answer here. RIght now the
    thread is listed as "Unanswered". To do this click on
    the answered link at the top of the thread.

  • Multi track audio support on Apple TV

    There appears to be a problem with Apple TV supporting multiple audio tracks. It looks like it has been a desired feature since Apple TV launched and even recently stated as working with the 2.3.1 update.
    I'm a new owner of an Apple TV, I'm a little disappointed that the update didn't really add this support (support for multiple audio tracks is stated in the 2.3.1 update description and on the product description here: http://www.apple.com/appletv/whatson/movies.html).
    I'm able to be patient since the product is still new to me, but it would be nice to hear some followup or statement on what exactly is going on with this feature (I know, "good luck", but I would think some response from apple would be in order only because they claim it's supported). I've looked around in the store and can't find any content that has extra audio tracks available and any video I create myself doesn't have support either.
    So, is this a bug, by design, or did I just get duped into buying a product on false promises.
    If anyone finds content in the store that has multiple audio tracks available and working, can you post it here?

    Yah, I took note of that. That's really why I created this thread, in hopes that as soon as something with an alternate track is made available that someone would be so kind as to post it here.
    But given all the problems everyone has with trying to get a video with multi track audio to work on apple tv, I'm not expecting one until at least another point release (or two or three).
    Personally I don't think we've seen one because it simply doesn't work yet (and I want so badly to be proven wrong).

  • Will Soundtrack Pro allow me to master multi-track audio CD?

    Please help! I have been looking for the past 4 days for a multi-track audio editing software that will allow me to burn multiple tracks to a CD. Here's what I'm trying to do: I have a 45 minute message and I want to fade a song in at the beginning, and another song fading out at the end. Then I want to place markers every 10 minutes, split into separate tracks, and burn the whole thing to CD from within that software (possibly I can fudge on this last one by exporting each individual track to iTunes, then making a playlist, but if Soundtrack Pro or some other program can do it all, then that is what I prefer!)
    I tried Audacity, and it was close to what I wanted, but when I exported into iTunes the last 20 seconds of every song dropped audio! I have also tried the following and these are the errors/difficulties I encountered:
    • Amadeus II : No multi-track mixing capability
    • Cacophony: kept crashing, multiple error messages
    • Jasmine: unique tape-style interface, but again, no multi-track export
    • Sound Studio 3: good interface, easy marking, but no sound after export
    • Snd Sampler: only one sound can be open at a time
    • Deck LE: wouldn't even open one of my audio files!
    So now my attention is on Soundtrack Pro and Logic Pro. Both of these seem like they will have what I need, but I'm going to have to fork over a pretty penny. Which is better and will either do multi-track mixing to CD?
    Thank you so much to anyone who will read through my whole ordeal and help me out with their musical expertise and sound audio advice!
    Sincerely,
    Paul

    Hello,
    I thank you both for the help you've given, and I have obtained STP and really enjoy using it, but I am still disappointed that it will not allow me to master multiple tracks. For instance in Audacity, there is the export multiple command that splits one long song up according to the markers that you placed and then exports them as several different files. In STP, this same process is amazingly difficult, you have to take the razor tool, cut each section, drag it down to another track, then put a stop song marker after the cut section, then select each track and "export selected". (Do you know of an easier way?) Now for a $1200 dollar program that is just a little bit ridiculous, why cannot Apple just have a command to export by markers? Where can I go to request this feature be implemented?
    Here's an example of what I am looking for, with features such as Redbook CD mastering (but this software is too buggy)
    http://www.xowave.com/
    Sincerely,
    Paul

  • Mapping problem with compressed key update record

    Hi, could you please advise?
    I'm getting the following problem:
    About a week ago replicat abened with "Error in mapping" error. I found in discard file some record looking like:
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Where filed9 = @GETENV("GGHEADER", "COMMITTIMESTAM"), field10 = = @GETENV("GGHEADER", "COMMITTIMESTAM"), others are table fields mapped by USEDEFAULTS
    So I got Mapping problem with compressed key update record at 2012-06-01 15:44
    I guess I need to mention that extract failed in 5 minuts before it with: VAM function VAMRead returned unexpected result: error 600 - VAM Client Report <[CFileInfo::Read] Timeout expired after 10 retries with 1000 ms delay, waiting to read transaction log or backup files. To increase the number of retries, use SETENV (GGS_CacheRetryCount = n) in Extract parameter file. To control retry delay time, use SETENV (GGS_CacheRetryDelay = n). handle: 0000000000000398 ReadFile GetLastError:997 Wait GetLastError:997>.
    I don't know if it has ther same source as data corruption, could you tell me if it is?
    Well, I created new extract, starting 2012-06-01 15:30 to check if there was something with extract at the time, but got the same error.
    If I run extract beging at 15:52 it starts and works.
    But well, I got another one today. Data didn't look that bad, but yet one column came with null value:( And I'm using it as a key column, so I got Mapping problem with compressed key update record again:(
    I'm replicating from SQL Server 2008 to Oracle 11g.
    I'm actually using NOCOMPRESSUPDATES in Extract.
    CDC is enabled for all tables replicated. The only thing is that it is enabled not by ADD TRANDATA command, but by SQL Server sys.sp_cdc_enable_table, does it matter?
    Could you please advise why does it happen?

    Well, the problem begins somewhere in extract or before extract, may be in transaction log, I don't know:(
    Here are extract parameters:
    EXTRACT ETCHECK
    TRANLOGOPTIONS MANAGESECONDARYTRUNCATIONPOINT
    SOURCEDB TEST, USERID **, PASSWORD *****
    exttrail ./dirdat/ec
    NOCOMPRESSUPDATES
    NOCOMPRESSDELETES
    TABLE tst.table1, COLS (field1, field2, field3, field4, field5, field6, field7, field8 );
    TABLE tst.table2, COLS (field1, field2, field3, field4 );
    Data pump:
    EXTRACT DTCHECK
    SOURCEDB TEST, USERID **, PASSWORD *****
    RMTHOST ***, MGRPORT 7809
    RMTTRAIL ./dirdat/dc
    TABLE tst.table1;
    TABLE tst.table2;
    Replicat:
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    Rpt file for replicat:
    Oracle GoldenGate Delivery for Oracle
    Version 11.1.1.1 OGGCORE_11.1.1_PLATFORMS_110421.2040
    Windows x64 (optimized), Oracle 11g on Apr 22 2011 00:34:07
    Copyright (C) 1995, 2011, Oracle and/or its affiliates. All rights reserved.
    Starting at 2012-06-05 12:49:38
    Operating System Version:
    Microsoft Windows Server 2008 R2 , on x64
    Version 6.1 (Build 7601: Service Pack 1)
    Process id: 2264
    Description:
    ** Running with the following parameters **
    REPLICAT rtcheck
    USERID tst, PASSWORD ***
    DISCARDFILE ./dirrpt/rtcheck.txt, PURGE
    SOURCEDEFS ./dirdef/sourcei.def
    HANDLECOLLISIONS
    UPDATEDELETES
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    MAP dbo.TPROCPERIODCONFIRMSTAV, TARGET R_019_000001.TPROCPERIODCONFIRMSTAV, COLMAP (USEDEFAULTS , field5 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed6= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (filed1, field2, field3);
    CACHEMGR virtual memory values (may have been adjusted)
    CACHEBUFFERSIZE: 64K
    CACHESIZE: 512M
    CACHEBUFFERSIZE (soft max): 4M
    CACHEPAGEOUTSIZE (normal): 4M
    PROCESS VM AVAIL FROM OS (min): 1G
    CACHESIZEMAX (strict force to disk): 881M
    Database Version:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE     11.2.0.1.0     Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    Database Language and Character Set:
    NLS_LANG = "AMERICAN_AMERICA.CL8MSWIN1251"
    NLS_LANGUAGE = "AMERICAN"
    NLS_TERRITORY = "AMERICA"
    NLS_CHARACTERSET = "CL8MSWIN1251"
    For further information on character set settings, please refer to user manual.
    ** Run Time Messages **
    Opened trail file ./dirdat/dc000000 at 2012-06-05 12:49:39
    2012-06-05 12:58:14 INFO OGG-01020 Processed extract process RESTART_ABEND record at seq 0, rba 925 (aborted 0 records).
    MAP resolved (entry tst.table1):
    MAP tst.table1, t.table1, COLMAP (USEDEFAULTS , filed9 = @GETENV("GGHEADER", "COMMITTIMESTAMP"), filed10= @CASE(@GETENV("GGHEADER", "OPTYPE"), "SQL COMPUPDATE", "U", "PK UPDATE", "U",@GETENV("GGHEADER", "OPTYPE")) ), KEYCOLS (field3);
    2012-06-05 12:58:14 WARNING OGG-00869 No unique key is defined for table table1. All viable columns will be used to represent the key, but may not guarantee uniqueness. KEYCOLS may be used to define the key.
    Using the following default columns with matching names:
    field1=field1, field2=field2, field3=field3, field4=field4, field5=field5, field6=field6, field7=field7, field8=field8
    Using the following key columns for target table R_019_000001.TCALCULATE: field3.
    2012-06-05 12:58:14 WARNING OGG-01431 Aborted grouped transaction on 'tst.table1', Mapping error.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    2012-06-05 12:58:14 WARNING OGG-01151 Error mapping from tst.table1 to tst.table1.
    2012-06-05 12:58:14 WARNING OGG-01003 Repositioning to rba 987 in seqno 0.
    Source Context :
    SourceModule : [er.main]
    SourceID : [er/rep.c]
    SourceFunction : [take_rep_err_action]
    SourceLine : [16064]
    ThreadBacktrace : [8] elements
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x143034) [0x00000001402192B4]]
    : [C:\App\OGG\replicat.exe(ERCALLBACK+0x11dd44) [0x00000001401F3FC4]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x000000014009F102]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B29CC]]
    : [C:\App\OGG\replicat.exe(<RCALLBACK+0x11dd44) [0x00000001400B8887]]
    : [C:\App\OGG\replicat.exe(releaseCProcessManagerInstance+0x25250) [0x000000014028F200]]
    : [C:\Windows\system32\kernel32.dll(BaseThreadInitThunk+0xd) [0x000000007720652D]]
    : [C:\Windows\SYSTEM32\ntdll.dll(RtlUserThreadStart+0x21) [0x000000007733C521]]
    2012-06-05 12:58:14 ERROR OGG-01296 Error mapping from tst.table1 to tst.table1.
    * ** Run Time Statistics ** *
    Last record for the last committed transaction is the following:
    Trail name : ./dirdat/dc000000
    Hdr-Ind : E (x45) Partition : . (x04)
    UndoFlag : . (x00) BeforeAfter: A (x41)
    RecLength : 249 (x00f9) IO Time : 2012-06-01 15:48:56.285333
    IOType : 115 (x73) OrigNode : 255 (xff)
    TransInd : . (x03) FormatType : R (x52)
    SyskeyLen : 0 (x00) Incomplete : . (x00)
    AuditRBA : 44 AuditPos : 71176199289771
    Continued : N (x00) RecCount : 1 (x01)
    2012-06-01 15:48:56.285333 GGSKeyFieldComp Len 249 RBA 987
    Name: DBO.TCALCULATE
    Reading ./dirdat/dc000000, current RBA 987, 0 records
    Report at 2012-06-05 12:58:14 (activity since 2012-06-05 12:58:14)
    From Table tst.table1 to tst.table1:
    # inserts: 0
    # updates: 0
    # deletes: 0
    # discards: 1
    Last log location read:
    FILE: ./dirdat/dc000000
    SEQNO: 0
    RBA: 987
    TIMESTAMP: 2012-06-01 15:48:56.285333
    EOF: NO
    READERR: 0
    2012-06-05 12:58:14 ERROR OGG-01668 PROCESS ABENDING.
    Discard file:
    Oracle GoldenGate Delivery for Oracle process started, group RTCHECK discard file opened: 2012-06-05 12:49:39
    Key column filed3 (0) is missing from update on table tst.table1
    Missing 1 key columns in update for table tst.table1.
    Current time: 2012-06-05 12:58:14
    Discarded record from action ABEND on error 0
    Aborting transaction on ./dirdat/dc beginning at seqno 0 rba 987
    error at seqno 0 rba 987
    Problem replicating tst.table1 to tst.table1
    Mapping problem with compressed key update record (target format)...
    filed1 = NULL
    field2 =
    field3 =
    field4 =
    field5 =
    datefield = -04-09 00:00:00
    field6 =
    field8 =
    field9 = NULL
    field10 =
    Process Abending : 2012-06-05 12:58:14

  • Mapping problem with compressed key update record (target format)...

    Hi Guys,
    Getting below error while replication from Source to target. Source table is having NOT NULL Column, but on target replicat process giving error about some NULL value ??
    How to overcome this issue, any idea...
    2011-08-04 10:35:04 INFO OGG-00995 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK starting.
    2011-08-04 10:35:05 INFO OGG-00996 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: REPLICAT RMASTRK started.
    2011-08-04 10:35:06 WARNING OGG-00869 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: OCI Error ORA-01407: cannot update ("INFRA"."CUST"."CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE" = :a4,"ORD_QTY" = :a5,"ORD_PRICE" = :a6,"CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.
    2011-08-04 10:35:06 WARNING OGG-01004 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Aborted grouped transaction on 'INFRA.CUST', Database error 1407 (ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL).
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 *WARNING OGG-01154 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: SQL error 1407 mapping INFRA.CUST to INFRA.CUST OCI Error ORA-01407:* *cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"DP_ID" = :a3,"EXCHNG_CODE"=:a4,"ORD_QTY"*
    *= :a5,"ORD_PRICE" = :a6,"SCRP_CODE" = :a7,"MKRT_CODE" = :a8,"CHANN>.*
    2011-08-04 10:35:06 WARNING OGG-01003 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Repositioning to rba 44132192 in seqno 68708.
    2011-08-04 10:35:06 ERROR OGG-01296 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: Error mapping from INFRA.CUST to INFRA.CUST.
    2011-08-04 10:35:06 ERROR OGG-01668 Oracle GoldenGate Delivery for Oracle, rmastrk.prm: PROCESS ABENDING.
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    *Mapping problem with compressed key update record (target format)...*
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Oracle GoldenGate Delivery for Oracle process started, group RMASTRK discard file opened: 2011-08-
    04 10:35:05
    Current time: 2011-08-04 10:35:06
    Discarded record from action ABEND on error 1407
    OCI Error ORA-01407: cannot update ("INFRA"."CUST"."SCRP_CODE") to NULL
    (status = 1407), SQL <UPDATE "INFRA"."CUST" SET "ORD_ID" = :a2,"MKRT_CODE" = :a8,"CHANN>
    Aborting transaction on ./dirdat/pm beginning at seqno 68708 rba 44132192
    error at seqno 68708 rba 44132192
    Problem replicating INFRA.CUST to INFRA.CUST
    Mapping problem with compressed key update record (target format)...
    ORD_QTY = 500
    ORD_PRICE = 37430
    SCRP_CODE =
    MKRT_CODE = N
    Any inputs / help would be appreciated.
    Regards,
    Manish

    The SCRP_CODE column has a NOT NULL constraint. The ORA-01407 error is telling you that you cannot update or set a value for this column to null because of the constraint. This has absolutely nothing to do with an index. You can use a marker/sentinel value in lieu of using NULL. For a numeric field, where everything is positive, a negative value (-1) can be decoded as meaning null. For a character field, a code such as NA can represent NULL.
    This also has nothing to do (directly) with GoldenGate failing because of this error. The underlying SQL statement will fail everywhere, regardless of the tool or application. It is not a case of failing only in GoldenGate.

  • I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

    I have a problem with my iphone 5s. recording a vid using back lens and no sound but on the rear lens there is a clear voice.. anyone with any answers???

    Hi, Nurlynn.  
    Thank you for visiting Apple Support Communities.  
    I would need clarification on this issue to provide a better answer.  However, here are a couple articles that I would go through when experiencing issues with the Mic and Camera.  
    If your voice is too faint or sounds unclear using iPhone, or iPod touch
    http://support.apple.com/kb/ts5183
    Get help with the camera on your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT6350
    Cheers, 
    Jason H.  

  • Problem with multi-mapping

    Hello everybody,
    we got a problem with multi-mapping.
    Source and target message-type are the same:
    <xsd:element name="MY_MESSAGE_TYPE">
    _<xsd:element name="BUSTRANS">
    __<xsd:element name="CHILD_1" maxOccurs="unbounded">
    ___<xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
    ____<xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
    __<xsd:element name="CHILD_2" maxOccurs="unbounded">
    ___<xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
    ____<xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
    The requirements are:
    <xsd:element name="MY_MESSAGE_TYPE"> should be created as often as <xsd:element name="CHILD_2"..> occurs
    a) so we mapped
    CHILD_2 -> MY_MESSAGE_TYPE
    BUSTRANS -> CopyValue -> BUSTRANS
    CHILD_1  -> CopyValue -> CHILD_1
    SUB_CHILD_1 -> CopyValue -> SUB_CHILD_1
    SUB_CHILD_1_NAME -> CopyValue -> SUB_CHILD_1_NAME
    CHILD_2 -> splitByValue(eachValue) -> CHILD_2
    The problem is:
    If we duplicated
    a) SUB_CHILD_1
    b) subtree CHILD_2 (so 2 messages will be generated)
    for testing, SUB_CHILD_1 only occurs 1 time! But we need it in every target message as often as it occurs in the source message.
    For your testing, here is the datatype:
    <?xml version="1.0" encoding="ISO-8859-1"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns="http://enbw.com/XI/SAPCRMB2B/javamappings_test" targetNamespace="http://mynamespace.com/XI/SAPCRMB2B/javamappings_test">
    <xsd:complexType name="MultipleBookingOrderRequest">
    <xsd:sequence>
      <xsd:element name="BUSTRANS">
       <xsd:complexType>
        <xsd:sequence>
         <xsd:element name="CHILD_1" maxOccurs="unbounded">
          <xsd:complexType>
           <xsd:sequence>
            <xsd:element name="SUB_CHILD_1" maxOccurs="unbounded">
             <xsd:complexType>
              <xsd:sequence>
               <xsd:element name="SUB_CHILD_1_NAME" type="xsd:string">
               </xsd:element>
              </xsd:sequence>
             </xsd:complexType>
            </xsd:element>
           </xsd:sequence>
          </xsd:complexType>
         </xsd:element>
         <xsd:element name="CHILD_2" maxOccurs="unbounded">
          <xsd:complexType>
           <xsd:sequence>
            <xsd:element name="SUB_CHILD_2" maxOccurs="unbounded">
             <xsd:complexType>
              <xsd:sequence>
               <xsd:element name="SUB_CHILD_2_NAME" type="xsd:string">
               </xsd:element>
              </xsd:sequence>
             </xsd:complexType>
            </xsd:element>
           </xsd:sequence>
          </xsd:complexType>
         </xsd:element>
        </xsd:sequence>
       </xsd:complexType>
      </xsd:element>
    </xsd:sequence>
    </xsd:complexType>
    </xsd:schema>
    Regards
    Dominic

    Mario,
    <i>multimapping (split IDOC into several IDocs) is possible with IDocs. We did it!</i>
    Did you use IDOC packaging for this?
    AFAIK,when  you use multimapping that involves different adapters including one J2EE adapter and a IDOC adapter in the inbound side, multi mapping does not work.
    Regards,
    Bhavesh

  • My sound is like echo and i can't solve the problem with realtek hd audio manager

    HP G72 notebook
    Windows 7 64 bit
    Sound is like echo and can't solve problem with Realtek HD audio manager

    It's a Qosmio X300-16M (windows 7 64bit)
    I downloaded the last toshiba's sound driver (for win 7 64bit), but it's as if it doesn't contain MaxxAudio anymore... (but the file maxxaudio.dll is still in realtek directory)
    It worked correctly after Windows 7 update, (that's why I tried to reinstall the audio drivers which were in the DVD... but it does not have resolved the problem.)
    And all my system restore's points have been lost after a wrong bios update or something else (but this isn't a problem anymore)
    Now, my computer works correctly, my only problem is that the MaxxAudio tab (from Waves Audio) in the realtek audio manager disappeared... (It just makes a better sound...)
    And I just want to know if it's a curent problem or not... and if someone can fix it

  • Monitoring and recording problem with midi vs audio firewire

    I'm trying to record my Roland synth via Inspire firewire box into Logic express. I'm able to record and monitor thru the output of the inspire box. However If I'm using firewire, I can't hear other midi file tracks and vice versa. I keep switching input and output sources in the control settings but it seems like I either have to use all midi tracks or all audio tracks. Same situation with playback. I know this is wrong but am totally stumped. Any advice would by awesome.

    Dave, You might need an external DAW to do this, I got it working and I'm an idiot. There is only one I/O for logic and if you use it for the audio recording it's not available for the sounds you want to have coming out of logic. I have Roland Edirol UA-25USB2 and it works like a charm, If I understand what I did correctly, the sound and MIDI messages are routed via an Aggregate Device in the audio/MIDI set-up [you configure the device in the audio half] to the Edirol, and there are many extra functions to choose from-I avoid the 3.5mm audio out headphone plug by routing audio out through the DAW Edirol-much better sound quality than the mini stereo jack.

  • Problem with Multi-camera function

    Hi!
    I have three camera angles - I put them each on different stage but since one guy had a problem and had to stop recording the whole thing got a little messy and I had to divide audio and video tracks to compensate with audio, however two of my tracks are now splitted in two (with blank space inside) and if I use group function - "Set clip marker" is no longer working and I cannot synchronize the video and prepare it for multi-camera editing.
    I hope you understand what I mean and thanks in advance for any advise!
    Thanks :)

    Colin,
    I did a multi camera edit of Act 1 of a taped performance and all went well. Moved on to Act 2, which ran longer and each camera needed a tape change. So I matched the clips from each camera on each video track and tried to move on to the sync & then create a multi camera sequence stage of the project. That's when I hit a road block. I could not sync the four video tracks. So I consulted Adobe's on line help and this was all I could find about my predicament:
    Note: Adobe Premiere Pro uses an overlay edit when  synchronizing clips. Take care not to overwrite adjacent clips if you have  multiple clips on the same track.
    So what was I to do next? I found your post and now know exactly what to do. Thanks for a great explaination and saving me a lot of head scratching.
    Why couldn't Adobe explain it as well?
    Thanks,
    Angelo

Maybe you are looking for