Problems with multiple sites

I created a site that I successfully published to a folder. I then created a new site and attempted to publish that to a separate folder but found to my dismay that the contents of the first site were getting published as well. What am I doing wrong?

thanks
also found this in the mean time.
http://web.mac.com/mark8heaton/DomainSeparation/iWeb.html
and if you are on 8
http://alyeska.altervista.org/en/iWebMultiplewebsites.html

Similar Messages

Exchange 2010/Outlook 2010 Security Alert (...there is a problem with the site's security certificate.)

I've been looking to resolve this issue for a while now and was hoping someone could help me understand my options.
We have Exchange 2010 & Outlook 2010 in our environment. I've created a SSL cert for our ActiveSync from a reputable CA and unfortunately, as you may not be surprised, we are seeing an alert each time we open Outlook that states:
"Security Alert; Information you exchange with this site cannot be viewed or changed by others. However, there is a problem with the site's security certificate.
The name on the security certificate is invalid or does not match the name of the site."
Of course my internal server name does not match my external server name. So the SSL I had created for use with OWA and ActiveSync is rejected by my internal Outlook clients.
After doing some research I believe this is related to the Autodiscover service being configured with my internal server name and not my external name.
I've found some info about adding New-AutodiscoverVirtualDirectory and Set-ClientAccessServer commands and then found this article that might help. (Configure
Outlook Anywhere to Use Multiple SSL Certificates) but nothing is specific to my configuration and I'm concerned about what will happen to my existing configuration if this fails.
What happens when you run Set-ClientAccessServer? Does it retain and keep the old server config in place and add a new one or does it wipe it out? Will all of my devices need to be reconfigured?
Same with New-AutodiscoverVirtualDirectory. Does this simply add another virtual directory or is it going to overwrite my existing config?
Then there is the question of whether or not any of this will actually address my issue at all.
absolutezero273c

Sorry.
"[PS] C:\Windows\system32>Set-ClientAccessServer -Identity MailExt -AutoDiscoverServiceInternalUri "https://MailExt
.contoso.com/autodiscover/autodiscover.xml"
The operation couldn't be performed because object 'MailExt' couldn't be found on 'DomainController2.contoso.local'.
+ CategoryInfo : NotSpecified: (0:Int32) [Set-ClientAccessServer], ManagementObjectNotFoundException
+ FullyQualifiedErrorId : 4D980455,Microsoft.Exchange.Management.SystemConfigurationTasks.SetClientAccessServer"...is the error I get.
I've created the split zones and populated the Forward Lookup Zones as follows:
CONTOSO.COM
MailExt(CNAME)MailInt.contoso.local
_tcp _autodiscover(SRV)MailExt.contoso.com
CONTOSO.LOCAL
MailInt(A)192.168.1.10
MailExt(CNAME)MailInt.contoso.com
One thing I did notice is that there isn't a _tcp _autodiscover entry for MailInt in my Forward Lookup Zones. It was recommended that I make that entry for _tcp _autodiscover(SRV)MailExt.contoso.com in another post I read somewhere.
I believe what I am trying to do is create a new autodiscover object as is shown here:
I see there is a Get-ClientAccessServer & Set-ClientAccessServer command but I need to add a CAS. Does the Set-ClientAccessServer add or simply modify?
Or would that require the New-AutodiscoverVirtualDirectory command? I read
this page that discussed creating new virtual directories but that seemed a little risky without knowing all the ins and outs of how this service functions and to what degree this would affect the existing configuration.
I was able to use the Set-ClientAccessServer command and change the actual internal autodiscoverUri to https://MailExt.contoso.com/autodiscover/autodiscover.xml but the name still says MailInt and I continue to get the SSL cert warnings because it is looking
at MailInt.contoso.local.
absolutezero273c

Problem with multiple versions of documents being published with 001, 002, etc.

I am using Contribute CS3. I am having a problem with multiple versions of documents being published on the sever with 001, 002, etc in the name. So that I end up with 2 or 3 versions of a document on the server. Does anyone know why / how Contribute is doing this? Thanks for any help you can give.

Your Web site administrator will need to update your key to allow you to delete files you are able to edit.

Problem with multiple Toplink/JPA apps in same server

Anyone have experence of running serveral Toplink/ EJB-3 Web apps in the same server (OC4J, alas)?
We seem to get a problem with the second app failing to initialise toplink, with an entity not found message. Each app runs OK on it's own.

Yes, they access the same datasource and most of the tables overlap.
We're thinking it might help to have common entity classes and put them in a shared library, but I don't know if this is relevant (setting up shared libraries complicates testing and tends to snowball, I reckon we need about 15 jars all told).
I''ve had some funnies on OC4J before which I think may be to do with it's use of ClassLoaders, for example I initially put persistence.xml in the libary jar with the data model, but for some reason I get the entity not found error that way. It only seems to work if it's in the classes folder.
For the moment we're getting arround the problem with multiple OC4J instances in the server.

Problems with multiple idocs in one file ( Inbound file )

HI,
Thanks in Advance for your suggestions.. Highly appreciated.
We have problems with multiple IDocs in one file.
We are using XIB ( Amtrix ) as Middleware to receive the files.
Curretenly When the file contains one IDoc then there is no problem. IDoc is created and everything is ok.
If file contains two IDocs ( for example two messages ORDERS and DELVERY ) then it is creating two IDocs but both IDocs contains ORDERS plus DELIVERY segements information. That is the problem. Some how SAP unable to differentiate the IDocs in the file.. But it knows that how many idocs are there in the file..because it is creating exact number of idocs.
We are using TRFC port ... Do I need to change it to File port..
When we have more than one idoc do we need set any parameter in the file ...

Thanks for the swift response. Always ideas are useful.
As of now , Middleware cannot split the file.
Thing is SAP is creating two Idocs with different message types. Problem is First IDoc contains ORDERS message type but also DELIVERY segments as well. Second IDoc with DELIVERY message tyoe but ORDERS segments as well... This is the problem... I think we are missing some field activation in file for EDIDC record.
As far as I know file port supports the number of IDocs in one file.. Hope TRFC port also supports that

Problem with creating site from another computer!

Hi
I have WebDB 2.2 and Oracle8i instaled on the same computer. I have a problem to create site from another computer. There is not any process when I try to create site. There is always 0%.
But I have no problem with creating site on the origin computer.
Does anybody know something about it?

I am just not clear what to do once I have made changes and have published the new information.
You shouldn't have to do anything. iWeb will save the information in the Domain.sites file. You can keep this file in a folder, or even on your desktop and iWeb will launch from a double-click on the file.

Problem with multiple forms and subview

I have a problem when using NetBean Web Pack (JDK6, Net Beans 5.5, JSF 1.2).
1) I created a JSF page (hello.jsp) and a page fragment (header.jspf) inside Web Pack, and let the JSF page (hello.jsp) includes the page fragment.
2) The include instruction is outside of the "form" element id=main_form() of the first JSF page.
3) Inside the page fragment (header.jspf), I put a form (id=header_form) with some input fields inside the "subview" element.
4) When running the web application, the form and its children (id=header_form) inside the subview are not rendered.
It seems to be a problem with multiple forms on a page and the subview.
Do I use these JSF components incorrectly? Any advice?
Thanks

The forms are not nested.
hello.jsp
<webuijsf:body ...>

<div style="margin: 0px 0px 10px 0px; left: 0px; top: 0px">
<jsp:directive.include file="Header.jspf"/>
</div>

<webuijsf:form ...>
From above fragment, you can see the header.jspf is outside of the form element.

LOV Problem with multiple values

HI All,
I have a problem with LOV .When ever i click LOV after search button all values are displaying fine.
But when i get so many values i want to select only one vlaue that is not cmng to the main page ....Cursor is in running state always after that time out error is coming in my application .
This problem is coming with with only single value selection in lOV only problem with Multiple values retrival that time only...
(Iam using 11.1.1.3 Jdeveloper.)
Thanx in advance...

duplicate of {thread:id=2286814}

Problems with Multiple Photo Galleries

Hey all, I am having issues with multiple photo galleries. The problem is, iWeb will randomly delete old photo libraries when new ones are made.
My workflow is each blog entry has its own Photo Library attached to it, so i really would love to be able to keep this functionality.
Does anyone have any clues as to why they are getting deleted? They literally just vanish from the entries in iWeb...
Many thanks, Matt

mattperrott wrote:
Each blog entry has a iweb photo gallery attached to it. I create these by duplicating a previous blog entry, and changing the details as well as the photos contained inside.
Matt ~ Even without adding such complexity, many people have problems with their iWeb blog. So even if someone helps you to solve this problem, you may then be back with a different iWeb blog problem: Lost all your blog entries or all your comments or unable to publish, etc.
mattperrott wrote:
Any thoughts on why this might happen?
The simple answer is that Apple's implementation of iWeb's blog appears to be buggy. Every day on these forums you'll likely see a couple of problems with iWeb's blog, often "solved" like this: +"I deleted my blog page, and was able to successfully publish the site"+. Also, if you ever have to re-publish everything (say, after upgrading iWeb) you'll wish you had a web-based blog.
mattperrott wrote:
This isnt a problem currently but if i ever need to republish my entire site it is a potential killer, especially as it grows...
The person who posted the following thread had similar concerns saying: +"...I get the feeling when this gets bigger, it'll outgrow iWeb's capability."+ Read his solution here:
_To blog or not to blog_
And to link to an external blog from iWeb's navbar:
Create a blank internal page titled "Blog" (Actually you can name the page whatever you want.) Then in that Blog page add an HTML Snippet with the following code:
<script type="text/javascript">
parent.window.location = "http://www.yourblogname.com"; // change this to your own URL
</script>
...Once published, clicking on "Blog" in the navbar will immediately redirect to your external Blog page. (Thanks to Cyclosaurus for the code).
By the way, rather than posting your URL in these forums like this:
www.local-hero.com.au
...include the prefix to make it conveniently clickable:
http://www.local-hero.com.au

A few problems with my site I'd be grateful for help with...

Hi, I'm encountering some strange problems with my website, and I'd be really appreciative if anyone could help me. The site's live so I've included links to help anyone kind enough to respond. Thanks in advance.
1. On many of the pages, a scrollbar appears at the width of the container as opposed to the browser window. The 'clear' property doesn't seem to work, (although I am quite new to it so could have made some sort of basic error).
http://austinlindsay.com/suretowin.html
2. I'm having difficulty with the 'screenshots' on the left hand side of the page. First, the larger images should only appear when hovering over the thumbnails, but they seem to appear when hovering over the space where they appear.
The second problem is trying to make the background of the larger images consistent with their individual images in the foreground. Problem is the background always have a fixed width across the page. You can see what I mean when hovering over the final screenshot (called 'Scoreboard')
http://austinlindsay.com/virtuoso.html
Two problems with the 'Featured' section. The central link jilts slightly when hovered over. It's really strange. I've tested it by changing the order and putting a different link in the centre, and found it's not a problem with a link, it's a problem with it being positioned centrally. I couldn't find a solution for it, though. The final problem with this is that a horizontal scrollbar appear when hovering over any of the links (apart from the final one, Logos, for some reason).
http://austinlindsay.com/
I know there's a lot of problems here, but thanks in advance to anyone who can help!

No, there is definitely no height property on the container (or the content which is causing the problem). But to be fair, it may be because the content that gets hidden is, until hovered over, not visible. I've posted the code for that below, along with the container if anyone could help?
/*main container*/
#content {
    position: relative;
    left: 0px; right: 0px;
    width: 960px;
    background-color: #333;
    padding-bottom: 3em;
    border-top: 0.1em solid #FFF;
    border-bottom: 0.1em solid #FFF;
    overflow:hidden;
/* container for the screenshots content below this*/
#main_content {
position: relative;
margin: 0 40px;
top: -160px;
/* screenshots - content that seems hides itself*/
#screenshot_list {
position: relative;
left: 72px;
#screenshot_list a {
border:none;
text-decoration:none;
padding: 5px 0px;
display:block; /**space between icons**/
position: relative;
width:150px;
#screenshot_list a span {
visibility:hidden;
display:block;
position: absolute;
/**adjust positioning of full size images in px or %**/
left: 130px;
top: 0px;
/**optional image captions**/
font-size: 13px;
line-height: 1.2;
color: #FFFFFF;
text-align: left;
background-color: #455c5a;
background-repeat: no-repeat;
/**optional image borders & padding**/
border: 2px solid#455c5a;
padding: 15px;
z-index: 100;
#screenshot_list a:hover span, #screenshot_list a:active span, #screenshot_list a:focus span {visibility:visible; z-index: 100;
padding: 15px;
#screenshot_list a:hover, #screenshot_list a:focus
{visibility:visible;
border: none;
z-index: 100;
padding-left:2px;

HT6065 I installed this update. I have never had problems with "multiple prompts to unlock "Local items" keychain" until after I installed this update. Now, I can't get it to STOP prompting me.

So how do I fix this? How do I get this to go away? It's prompting me for a password that I haven't ever set up!

I have the same problem with three pop-up prompts:
(1) com.apple.iCloudHelper wants to use the "login" keychain. Please enter the keychain password.
(2) CalendarAgent wants to use the "login" keychain. Please enter the keychain password.
(3) AddressBookSourceSync wants to use the "login" keychain. Please enter the keychain password.
I can enter my login password and the prompt goes away for a little while, but eventually returns. Or I can click on "Cancel" many multiple times and it goes away for a little while, but returns again.
I want a solution too and hope this additional information will help.

Candlestick chart problem with multiple series

Hello,
I added one mx:CandlestickSeries object and couple additional
mx:LineSeries objects to the chart. All series are represented but
still I have one problem. More series I add - less candles are
becoming of CandlestickSeries data. It seems that there should be
any scaling option for all series in the chart or something like
this, but I cannot find it. I'm still new in Flex Can anyone halp
me with this?
Thanx in advance
marukas

I've added screenshots to get better view of the problem.
Here is chart with addtional series:
Chart
with multiple series
And here nothing is changed except that additional line
series were removed:
Chart
with only one CandlestickSeries
Is it possible to get the same candles as in 2nd view with
addiotnal series added?

I can't access hotmail or gmail. I get the message "unable to connect to the server". However I can access both msn and google main page and not problems with other sites. Any ideas of what to do?

Cannot access hotmail or gmail, although no problems with the actual msn home page or other sites. I get the message: Firefox can't establish a connection to the server at .....
== URL of affected sites ==
http://login.live.com; http://www.google.com

Hi thanks for reply.
No, not that I'm aware. How/Where can I check this?
The only think I've done recently is install a different antivirus program and uninstall the old one which had expired. Not sure if this is linked to the problem...?

Problem with multiple client numbers from a view

Hi Gurus,
I have a problem with a view
Creates a view with a UNION ALL stmt
=====================================
Create view vw_benifits
as
SELECT
     Client_num, -- can have multiple values like 200,201,250
     PERNR,
     OBJPS,
     ENDDA,
     BEGDA,
     AEDTM,
     UNAME,
     COB_MNTH_AMT
FROM
     STG_SAP_PA9211_TB
UNION ALL
SELECT
     null, -- no client number for legacy data
     PERNR,
     OBJPS,
     ENDDA,
     BEGDA,
     AEDTM,
     UNAME,
COB_MNTH_AMT
from
     LEG_STG_SAP_PA9211_TB;
==============================
The second table contains legacy data (LEG_STG_SAP_PA9211_TB). The first table now contains multiple client data (ie the client_num can be 201,202,250 like that.
Now if the users qery the view they will only get that clients data.
eg selet * from vw_benifits where client_num=250 results only client 250 data. But I want to add the legacy data also with that.
I don't want to propose
selet * from vw_benifits where client_num in (250,NULL) since the users will be confused.
Is there any other way to do this . my requirement is like
If they query
select * from vw_benifits where client_num=250, the data should include all the records satisfying client=250 + the records from the legacy data. The view need to be created like that.
Appreciate your help
Deepak

Hi Thanks for the suggestion.
But I am not sure this may work for me. Here my users may not be able to use that since they don't know Oracle.
I want to hide that details from them
They may just issue a statement like this
select * from vw_benifits where client_num =250
Or
select * from vw_benifits where client_num =400 . But both times I need to show them the data from the legacy table.
Deepak

Problems with multiple e-mail accounts on Droid 2 & also can't put phone into Silent mode

I just received my Droid 2 and having a problems with having multiple e-mail accounts.
My original droid worked fine with all of this.
I have 2 different personal e-mail accounts setup.
When I click e-mail, it just defaults to the default e-mail address and I have no way of switching accounts. I have to change the default e-mail account in order to view the other account.
Along with having a shortcut on the home page to each e-mail account, it always just goes to the default one and no way of adding a shortcut to both.
When I did this on the original droid, i could choose which e-mail account I wanted a shortcut for and could obviously have both on the home screen.
I also have found no way to NAME the accounts, ex. Comcast & Work.
That way I could distinguish the difference between the 2 on my home screen even if I could get a shortcut to both.
not sure how this could be overlooked but I sure dont think there is a way to make this happen.
Also, what is with 2.2 System and not allowing you to put it in silent mode?
I updated my original Droid to 2.2 and could no longer make it silent with the volume button on side or going into the sound settings and changing it to silent, it would always stay on vibrate.
And now it does the same thing with Droid 2. I cant make it silent at all.
Any ideas on either issue

becker800 wrote:
ok I got the silent problem fixed.
The update changed vibrate to be always, even when on Silent mode.
The e-mail problem however is stll an issue and I realy hope they release an update to fix this.
I'm sure I'm not the only one with 2 e-mail accounts on their droid.
I never had an original Droid, so I can;t compare to what was on that. For me, I am using the "Messaging" app - it seems to be set up for multiple e-mail accounts better than the email app. Messaging is the one recommended by the manufacturer - give that a try.

Problems with multiple sites

Similar Messages

Maybe you are looking for