Problems with my canon mx471 printer

i was triying to install the canon printer MX471 via wireless in my macbook
but there is always an error that says "the printer in the network could not be detected automatically."
i dont know what i'm doing wrong

These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
Good luck,
Clinton

Similar Messages

  • I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"......

    I have just been having problems with my Canon MP250 printer and decided to uninstall and re-install the printer and everytime I try to re-install the printer trough preferences and all I keep getting was a message saying "preparing to queue"...... I then decided to try and reload the Canon printer drivers and for some silly reason I deleted the existing Canon printer drive. Now I cannot load them from the CD provided with the printer or from downloads through the Apple store. If anyone out there could help me I would be greatly appreciated......

    These Canon printer/scanner drivers from Apple - http://support.apple.com/kb/DL899 - should work. The MP250 is listed on the support page. Try downloading and installing them.
    Good luck,
    Clinton

  • Print quality problems with bluetooth Canon ip90 printer?

    I've had this problem on prior PBs and the canon website is decidely NOT helpful so here goes....
    I have a pixma ip90v printer with a bluetooth adaptor added to my MBook. It prints fine and I had no problems adding it to my new computer (it was originally used on a PBG4 and I had the same problem which is...) - every now and then the print quality goes to a light purple as if it's trying to save memory. Has anyone else encountered something like this?

    Try resetting the printing system http://support.apple.com/kb/PH14141
    You'll have to reinstall your printer after the reset.

  • When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    When I print a photo to my epson printer, it comes out larger than the original photo - so the photo prints beyond the borders. Tried readjusting all sorts of things but nothing helps. I had this same problem with my Canon. any ideas?

    Crop to the print size before pringing
    LN

  • Is anyone else having problems with the Canon Online Store?

    In the last month or so, I've had one problem after another with the Canon Online Store; from being unable to delete items from the shopping cart; to not being able to add "in stock" items; disappearing Wish Lists; and just now, I tried to add one lens cap to the 6 or 7 items I already had in the Shopping Cart, and they disappeared.
    I've called, more than once, and I've written, also more than once, to Canon Support about this, but they ignore what I tell them, and tell me there are no problems with the Online Store.  They don't even seem to report to anyone that anyone has complained, because each time is "the first time", even though I've called (more than once) and written (more than once) to them about continuing Online Stores problems.
    Is anyone else having problems with the Canon Online Store?
    Why does Canon not care to track reported problems with the storefront part of their web-site? 
    I'm not trying to insult Canon, it's just that I've been a Canon customer for less than 3 months, and the're only batting .333, so far.  Canon Support was very quick to respond about a concern I had that a 50mm f/1.4 I had just purchased was authentic or not.  In trying to register that lens, I looked up on the Canon web site where to find the serial number.  Since my new lens did not have any numbers there, I was concerned I had been sold a fake.  But, then Canon Support sent me link to a different online document that showed a few different places where it might be, and there it was. 
    Is Canon like that with other problems, as well?  Or is their "batting" average better than my very limited experience? 
    I just love my Rebel T5i, and my Canon lenses (from "the Kit brothers of the Cropped Frame coral":  EF-S 18-55mm f/3.5-5.6 IS STM, and EF-S 70-300mm f/4-5.6 IS USM; to the "Truly Nifty Fifty", the 50mm f/1.4 USM, [the f/1.8 is just a "thrifty fifty"], and finally, the "Super-Macro" MP-E 65mm f/2.8 1x-5x Macro)! 
    Regards and Thanks,
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

    Hi Danny.  Thanks for replying.
    I only use my desktop PC to access Canon's web site, and I've been using Mozilla Firefox for years.  And, yes, it is the latest version.  Since Canon REFUSES to support the use of Firefox on it's web site, WHAT BROWSER DOES CANON SUPPORT?  WHEN did Canon STOP SUPPORTING Firefox?
    I've been told that there are 2 pending orders in my account.  Yet, I NEVER placed those orders!  WHY CAN'T CANON SEE THAT THIS IS A PROBLEM??? 
    Instead of off-target suggestions, and pasted boilerplate REFUSALS TO EVEN LOOK at this issue, I would prefer it if Canon went "old school", and FIXED THE PROBLEM, in the first place!  But, maybe that's a bit too grown up of an answer for you! 
    "Award-winning" support???   And, just exactly WHAT AWARD did Canon "support" WIN for CONSISTANTLY IGNORING REPORTED PROBLEMS???  The OSTRICH?
    Please pull your head out, and FIX this problem, OR YOU ARE THE PROBLEM!!!
    Thank you for your "prompt" attention to this matter!
    Calen
    As an old friend used to always say,
    "Keep Looking Up!"
    Calen

  • Problems with color matching when printing...

         Hi, I work for a small family business in the P.O.P. industry.  We currently have myself and one other designer, we both take illustrator files that have come from the graphic design firm that we contract with and get them ready to print on our Vutek QS3200.  However ever since acquiring the printer we have begun to run into problems with the colors when printing.  When the files are exported off of my computer, I use either .tif or .pdf files, they print as they should, the colors seem to match the proof and everything goes smoothly.  However when the other designer exports a file, he tends to do mainly pdfs, the colors tend to be extremely different from where we want them.  Also we will get very strange results, such as yesterday he kept getting a faint yellow 1/2" border around his prints.  After I believe 3+ hours of him trying, I was given the original CD and instructed to try.  After 15-20 minutes of making the changes that we needed to make (adding a new price point) and ripping, mine printed perfectly. 
         We both use Macs, both have CS3 Design standard, only differences between the computers are mine is newer and a bit faster, and I'm running OS 10.5.6 and he has 10.4.  He has also at some point loaded various color profiles, whereas my CS package is just whatever the default is when I loaded it.  When we were being trained he grabbed the color profile off of the Colorburst RIP server and loaded onto his computer, plus I believe he has a couple for freelancing purposes on there as well.  My thought is that these profiles are somehow corrupting the files that are going through that computer, but I honestly am lost with it at the moment.  He believes the problem lies within the fact that he does not have the newer OS, I honestly cannot see that as having any effect on this at all.  I was wondering if anyone has run into any similar problems, or if anyone might have any advice on this issue?  I would really like to be able to solve this, as I was hired to do mainly structural design for the P.O.P. and I'm having to put in a lot of overtime to get my work done along with the additional work that I'm having to do.
    Thanks for your time

    I've got a few years experience calibrating large format printers.  First, the Yellow sounds like a file problem.  I used to work with two workstations, one PC ( RIP station ), and one Mac ( file prep station ).  I tend to agree with you in that the OS is probably not the problem.  But, any Colorburst profiles should remain in the RIP, not in the originator application.  My workflow consisted of creating EPS files that were based on established color settings in their given applications ( i.e., Illustrator, Photoshop ) which were interpreted by the RIP which had it's own calibrated profile ( perhaps more than one based on how many different substrates were being used ).  Your partner may be complicating things by incorporating a RIP profile prematurely.  If there are deviations big enough to be noticed, there has to be something in the application color settings that is causing some type of corruption.  This could lead back to the operating system, but I would think it lies somewhere in Bridge or the application color settings.  Start there.  You should seriously consider implementing a calibration system if you do not have one already.  Another slight possibility is the driver's ability to interpret files coming out of Leopard vs. files coming out of Tiger.  It may benefit you both to be in the same operating system dynamics, using the same driver versions and RIP profiles.  At the very least, match everything that is currently working successfully and put them on both machines.  If there is still a noticeable problem in color matching, then something is seriously wrong and you should call in a prepress profiling expert.  Hope this helps.

  • Hello, I currently have a MacBook snow leapord and i'm trying to connect it with my Canon MP560 printer, i put in the CD and installed everything properly but now when i add a printer it says a Queue already exists, i click continue and nothing happens???

    Hello,
    I'm using a MacBook Snow Leapord and I'm trying to connect it with my Canon MP560 printer/scanner.
    I installed the CD and followed along with the manual and did everything it asked, at the end it told me it was finished.
    So then I went to go print something and an error had occured so i went to the file menu on Microsoft Word for
    Mac and clicked Print/Add Printer and then i click on the Canon MP560 series-1 as it was the only one to click on.
    When I did it stated that I already has a Queue for this printer and if I'd like to add a new one so I clicked continue and nothing
    had happend. PLEASE HELP
    sincerely,
    Laura.

    I would recommend to download the driver appropriate for your system from the Canon webiste or, after installing it, to run software update and it will detect it for you.
    If you have the last driver appropriate for your system, you may wish to reset the printing system. To do this, go to Sys prefs/print and fax and, upon clicking minus button, also press Option/alt key. You will be asked to confirm, do it. Then, add the printer by pressing plus button, it should work now.
    But, before doing this, download the last good driver, CDs usually contain outdated drivers.

  • Can i use my new I pad with the Canon MX870 printer?

    Can I use a I PAD 2 with me Canon MX870 Printer?

    The Canon MX870 is not on Apple's AirPrint list of supported printers:
    AirPrint basics
    So you would have to find some Canon app or some third party app in the App Store to do some limited printing from iPad.

  • Unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code

    unable to find appropriate driver for my mcbook air using a ricoh aficio mp36501SP network printer.  had similar problem with another ricoh copier/printer, but was able to resolve that problem entering ip address.  this one wants job code.  i don't believe mac allows for input on job code or printer code for permission to print

    I'm having similar problems with an HP OfficeJet 6500. One suggestion that improved the situation, but did not totally solve the problem, was to select "OfficeJet Pro L7700" for its drivers.
    One other suggestion is to turn off the printer, then simultaneously hold down the "#" and "9" keys and turn the printer back on. This hot key seems to reset the printer to factory defaults, allowing you to set things up anew.
    Finally, kvetch to HP. Their networking software clearly has problems in its relationship to OSX, but nobody on either side seems motivated to bring in a good therapist.

  • Cannot print with the new OSX with my canon mp550 printer

    I cannot print with the new OSX with my canon mp550 printer , it sais there is no available driver ..!! what to do ..?? does anyone have a solution ..??

    OS X Mavericks: Reset the printing system

  • I want to use my jetpack 890L as a wireless router to allow wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I want to use my jetpack 890L as a wireless router to enable wireless printing with a canon laser printer. Is this possible, and does the jetpack support WPS?

    I’ve used several wireless printers with a 4510 and 5510 Jetpack and they all print just fine. The MHS890L does not support WPS. The WPS Wikipedia article briefly addresses the reason why you should not use WPS.  If you’re having trouble setting up your printer the manufacturer has a toll free support line to help you. Your Jetpack has the Wi-Fi Password on the bottom, under the battery, and or in the LED display.

  • Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?

    Last update for OS 10.8.2 caused big problems with HP photosmart B110 printer /scanner cannot scan does anyone have the same problem or a solution?
    iMac is connected via wirelss to printer/scanner. All was working OK until update.

    Assuming that the HP software is up-to-date, but still not working, have you tried Image Capture in the Applications folder. Does that work?

  • Problem with my canon printer mx890 error codr u052

    my canon printer mx 890 problem with error code u052 the type of printer head ios incorrect.this is out of the blue, I have been printing successfuly, nothing has changed

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • Problem with my canon ir c3170i

    when i print a letter type sheet with my canon ir c3170i printer in the office in landscape for both sides, it prints one side in one way and in the other side in the opposite way. i want to be able to print for both sides in the same direction, what cold be happening?

    I FINALLY SOLVED THE PROBLEM. YOU CAN PRINT IN BOTH SIDES IN THE SAME DIRECTION IN LANDSCAPE IF YOU PUT IN THE Binding Location OPTION Short Edge (Left).
    THANKS ANYWAY

  • Problems with using Canon LiDE 210 and OSX 10.7.4

    I am getting nowhere with installing the Canon LiDE 210 scanner software on my 2010 MBP. All I get when I try to scan is "insufficient memory". I can scan using Image Capture and with the trial VueScan software so the problem looks as if it is something to do with the Canon software or the way that it installs on the MBP. Has anyone else had a similar problem or can anyone suggest a fix? Many thanks

    Hellooo, I realise this thread is a year old and yet I'm having some real difficulty, hopefully this will fall on someones ears...
    Firstly I have a mac mini bought recently and running on Mountain Lion 10.8.3 I tried downloading what is apparently the most up to date drvier and mp navigator for use with the CanoScan LiDE 210 meaning, that both the driver and mp navigator are compatible with Mountain Lion. Here is the following link I used that was forwarded to me by Canon:
    http://support-asia.canon-asia.com/contents/ASIA/EN/0100434402.html
    http://support-asia.canon-asia.com/contents/ASIA/EN/0200153502.html
    I install both of the downloads, plug in the scanner, and nothing... no noise, no beep nothing to say that it is on. I try and open the scanner through system preferences-printer/scanner-canoscan icon yet I am then presented with the message; "failed to open a session on this device"
    Strange, I call canon back and they do not know what else to suggest apart from all the usual trouble shooting, the type that is very patronising and annoying... did you click the icon and press scan, did you click the install button after downloading the software... the sort of thing that might otherwise result in the beating, of ones own face with the phone
    At the end of this call, and after forwarding me a couple more useless links to unworkable downloads they say that it must be the product, and that I should contact the seller for a replacement.
    So I do, I contact Amazon, I get my replacement and voila, exactly the same problem.
    I even try getting it going using my mbp which is on snow leopard, which means I can use the installation disc that it is packed with it, it makes a noise, it sounds like its turning on but then when I click "open scanner" ... nothing, no option to scan, no acknowledgement of the device other than the icon itself in system preferences.
    Does anyone have any experience of this issue, does anyone know how I might resolve it?
    Many thanks,
    Jeff

Maybe you are looking for