Problems with my eMac. NEED YOUR HELP!

Hai,
I'm new right here, and i'm not very good at english, but I have problems with my eMac so I hope that someone can help me!
When I boot my Emac there's a screen that says:'
'to continye booting, type 'mac-boot' and press return.'
When I typed mac-boot I pressed enter(because I don't know the return-button) and then I get this screen:
'panic(cpu0): Unable to find driver for this platform: PowerMac6,4'
and other text with a lot of numbers.
Also in that screen stands:
'you need to restart your computer. hold the power button for several seconds or press the restart button'
I hold the power butten for several seconds and I put the computer on again, but than I'm getting the same texts&things.
So, can anyone help me, or do I have to go to the Macstore?(Does anybody know how much that costs?)
Thanks for reading& maybe helping!
Kisses from Amsterdam!

There are so many unknowns here it is hard to know the right advice to give.
+I didn't get any disks with it. Do you know if I can buy them somewhere?+
You may be able to get 10.4 Tiger disks from an Apple store, but that depends on where you live. Apple usually only sells their latest OS which is currently 10.5 Leopard, but I would think your eMac would be best with 10.4 Tiger. If you can get them from an Apple store, ask if they give a student discount if you are eligible as that can be a saving.
Normally every Mac, _new or used has its own disks,_ including an Apple Hardware Test CD. These disks are useful if you want to reinstall your operating system, but also useful for diagnostics and and some software repairs. The thing is, you could get hold of some disks and still find your machine has something broken in the hardware, and you will have spent money on the disks for nothing.
It would be better to determine if the computer is fixable before you purchased any OS disks.
Do you know anyone with an Apple computer who has some disks you could borrow? Or do you know someone who has an iBook which you could use in
FireWire target disk mode to connect the two together , and use the Disk utility in the iBook to run a test on your hard drive.
Even without a disk, you could still try starting up your computer in single user mode and perform some of the steps in this article.
http://support.apple.com/kb/TS1411?viewlocale=en_US
which assumes you have 10.3.9 which you may have seeing as it is an old computer.

Similar Messages

Huge problems with wireless, would need some help

Sorry for the bad topic, and sorry for my english.
And now the problem.
I have just bought my first laptop, and got almost everything to play nice in arch, except the wireless.
My card is a Intel PRO/Wireless 3945ABG (iwl3945), and i have a Dlink 524 router (abg).
Using WAP, but can change this if its help.
Right now I'am using NetworkManager (0.6.5-3 from rep) and KNetworkManager (from AUR), and it works very very bad.
It can't connect at startup (or atleast it doesn't...), it takes several attempts to get a connection, it drops the connection and dont reconnect when it does, and so on. Its almost unusable and force me to use wired a connection just to be sure to be able to write this.
After what i read in different forums and mailinglists, there seems to be a lot of problems with wireless at the moment?
Anyone got this combination to work fine? Or are there any other way of configuration i should try? Suggestions?
Thanks in advance!

I've had a lot of problems with wireless networking for several weeks recently, ever since I upgraded vanilla kernel26 from v.2.6.22 to v.2.6.23 (see http://bbs.archlinux.org/viewtopic.php?id=40145). I'm using the Windows driver bcmwl5 for the Broadcom 4311 chipset via Ndiswrapper, and I'm using WPA-PSK (TKIP) encryption. I also use a D-Link DI-524 router. What finally cured the problem was to install the new wicd (v.1.3.1) network manager which is now in extra and to set up all networking interfaces in that GUI, abandoning using Arch network profiles and all the detailed setup in /etc/rc.conf.
My /etc/rc.conf now only contains (I'm only showing entries pertinent to networking)
MODULES=(ndiswrapper capability sg acpi-cpufreq cpufreq_ondemand cpufreq_performance cpufreq_powersave)
HOSTNAME="RFDellLT"
DAEMONS=(syslog-ng @nfslock @nfsd @netfs @crond !network hal cpufreq portmap wicd sshd cups alsa @openntpd privoxy)
i.e. no more INTERFACES, not even "lo", gateway, ROUTES, NET_Profiles. Everything is set up through wicd. You only need to put the wicd daemon in the DAEMONS array (after hal which also loads dbus), and the network daemon isn't needed anymore. Also you should uninstall any other networkmanager.
To put the wicd icon in the system tray, create a shell script (give it any name) in the .kde/Autostart/ directory in your home directory (if you use KDE, otherwise do the equivalent thing for any other DE/WM) that contains the command /usr/lib/wicd/tray.py.
You may want to try wicd, perhaps it'll fix your problem. It certainly has gotten good press in this forum.

Problems with MSN Messenger - need quick help

I posted yesterday that I was having some trouble with my Ameritrade stock trading account, it was a java issue and they had me delete the cache in java and my Ameritrade worked again.
Now this morning I'm having problems with MS messenger which I use all day long for my job. When I try to sign in it keeps telling me it can't sign me in and I must not be connected to the internet. Which I am.
Its got some thing to do with my airport wireless thingy. Is there some way to "open" that up. When I unplug it and then replug it back in I can sign in to MS messenger for about a minute but then it somehow blocks it.
It keeps me on the internet but I get a message that I an not connected to .NET Messenger service. It is blocking me on my laptop PC now too. And it behaves the same way. After unplugging the airport I get a quick window where I can sign in but after that it blocks that .NET messenger service.
Is there some way I can open up the airport so I can get on the NET messenger service. Skype and iChat work but I can't use either for my job.
Does anyone have any suggestions (I'm begging here cuz i start work at 9:30 am and I need it working by then!).
Thanks, Susan

Wow this is a mess, I want to add that again i'm sure its the airport extreme somehow. However on my PC laptop I can sign into messenger with an older version of it but when i try the new LIVE messenger it won't let me sign in.
The iMac version forces you to use the latest version so I can't use an older "non live" version to sign in with. I am praying someone can help me figure out what is wrong.
Thanks sorry for reposting but i'm frantic!
Susan

Serious problems with paint method, need major help

I've got a mjor problem with displaying a BufferedImage Object. My program takes in an image, i call a method on it which creates an ImageObject, imgObj, which contains the following values:
Image width, called width
Image height, called height,
array of 8 bit integers for the ARGB value of each pixel, called int [] imgCol
I've managed to create a Buffered Image of the form:
//make a buffered image ready to take the array of pixels
bufferedImage = new BufferedImage( imgObj.width, imgObj.height, BufferedImage.TYPE_INT_ARGB);
Then I set the ARGB values in the BufferedImage, by specifying the integer array of pixels, imgCol:
//set the values in the buffered image using buffered image method
bufferedImage.setRGB( 0, 0, imgObj.width, imgObj.height, imgObj.imgCol, 0, imgObj.width);
Then I try to paint it, callling repaint() in the same method as the code above.
Now when I try the following stuff I get a Null Pointer Exception:
public void paint(Graphics g){
     paintImage(g);
public void paintImage(Graphics g){
     Graphics2D ImageGraphic2 = (Graphics2D)g;
     // Draws the buffered image to the screen.
     ImageGraphic2.drawImage(bufferedImage, 0, 0, this);
Can anyone help me in fixing this problem?

Here's the full stack trace, can't make heads or tails of what it's about though
Full thread dump Java HotSpot(TM) Client VM (1.4.1_01-b01 mixed mode):
"AWT-EventQueue-0" prio=7 tid=0x0ADAB440 nid=0xb38 in Object.wait() [ef5f000..e
5fd8c]
at java.lang.Object.wait(Native Method)
- waiting on <02F78010> (a java.awt.EventQueue)
at java.lang.Object.wait(Object.java:426)
at java.awt.EventQueue.getNextEvent(EventQueue.java:333)
- locked <02F78010> (a java.awt.EventQueue)
at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchT
read.java:161)
at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThr
ad.java:150)
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:144
at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:136
at java.awt.EventDispatchThread.run(EventDispatchThread.java:99)
"DestroyJavaVM" prio=5 tid=0x00034DB8 nid=0x5dc waiting on condition [0..7fadc]
"Java2D Disposer" daemon prio=10 tid=0x0AD4D1F0 nid=0x218 in Object.wait() [ef9
000..ef9fd8c]
at java.lang.Object.wait(Native Method)
- waiting on <02FE9938> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <02FE9938> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at sun.java2d.Disposer.run(Disposer.java:97)
at java.lang.Thread.run(Thread.java:536)
"AWT-Windows" daemon prio=7 tid=0x0ACB1528 nid=0x63c runnable [aeff000..aeffd8c
at sun.awt.windows.WToolkit.eventLoop(Native Method)
at sun.awt.windows.WToolkit.run(WToolkit.java:253)
at java.lang.Thread.run(Thread.java:536)
"AWT-Shutdown" prio=5 tid=0x0ACB1158 nid=0x480 in Object.wait() [aebf000..aebfd
c]
at java.lang.Object.wait(Native Method)
- waiting on <02FA4990> (a java.lang.Object)
at java.lang.Object.wait(Object.java:426)
at sun.awt.AWTAutoShutdown.run(AWTAutoShutdown.java:259)
- locked <02FA4990> (a java.lang.Object)
at java.lang.Thread.run(Thread.java:536)
"Signal Dispatcher" daemon prio=10 tid=0x009E8350 nid=0x788 waiting on conditio
[0..0]
"Finalizer" daemon prio=9 tid=0x0003E978 nid=0x3f0 in Object.wait() [ab1f000..a
1fd8c]
at java.lang.Object.wait(Native Method)
- waiting on <02F699B0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:111)
- locked <02F699B0> (a java.lang.ref.ReferenceQueue$Lock)
at java.lang.ref.ReferenceQueue.remove(ReferenceQueue.java:127)
at java.lang.ref.Finalizer$FinalizerThread.run(Finalizer.java:159)
"Reference Handler" daemon prio=10 tid=0x0003D548 nid=0x7a4 in Object.wait() [a
df000..aadfd8c]
at java.lang.Object.wait(Native Method)
- waiting on <02F69A18> (a java.lang.ref.Reference$Lock)
at java.lang.Object.wait(Object.java:426)
at java.lang.ref.Reference$ReferenceHandler.run(Reference.java:113)
- locked <02F69A18> (a java.lang.ref.Reference$Lock)
"VM Thread" prio=5 tid=0x009E52C0 nid=0x974 runnable
"VM Periodic Task Thread" prio=10 tid=0x009E7040 nid=0x4e4 waiting on condition

Random new line issue in email attachment using utl_smtp need your help.

Hi
I am getting one problem unable to solve, need your help.
I am creating one csv attachment in email using utl_smtp.
but there are random newline in the attachment value so the csv getting corrupted.
following is the attachment code
FOR C2 IN CUR_VALIDATION_ERROR
             LOOP
               IF CUR_VALIDATION_ERROR%ROWCOUNT = 1 THEN
                 UTL_SMTP.write_data(l_mail_conn,'"LOG DATE","DATA ERROR IDENTIFIER","EMPLOYEE ID","SOURCE SYSTEM","SOURCE FILE ROW","ERROR LEVEL","ERROR MESSAGE"'||CHR(13));
               END IF;
               UTL_SMTP.write_data(l_mail_conn,
                                                 chr(34)||C2.LOG_DT||chr(34)||chr(44)||
                                                 chr(34)||C2.DATA_ERR_ID||chr(34)||chr(44)||
                                                 chr(34)||C2.EMPE_ID||chr(34)||chr(44)||
                                                 chr(34)||C2.SOURCE||chr(34)||chr(44)||
                                                 chr(34)||C2.SOURCE_ROW||chr(34)||chr(44)||
                                                 chr(34)||C2.ERROR_LEVEL||chr(34)||chr(44)||
                                                 chr(34)||C2.ERR_MSG_DSCR||chr(34)||
                                                 CHR(13));
             END LOOP;

Thank you hm, but that is not the case, bcz I found newline character inside a sequence number. Its not possible to have newline character inside a sequence number
"LOG DATE","DATA ERROR IDENTIFIER","EMPLOYEE ID","SOURCE SYSTEM","SOURCE FILE ROW","ERROR LEVEL","ERROR MESSAGE"
"02-MAY-2012","7893660","123","XYZ","44952","WARNING","[02-MAY-12] - The value in field [PHONE]"
"02-MAY-2012","7893663","12
4","XYZ","52382","WARNING","[02-MAY-12] - The value in field [ADDRESS]"

Hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 :) what should i do need your help. thanks

hi i have an ipad mini and i have not used it for 2 month or more. Today i have tried to use it i came across with a problem. my Ipad is blocked and it asks me to wait 23,401,418 what should i do need your help. thanks

Have you charged ipad Try a Reboot press & hold power button & menu button hold both down until you see Apple Logo You may need to do this more than once. Bsydd uk

Hello plz i need yours help i have problem with my i cloud back up when i restore old back up t

hello >> plz i need yours help i have problem with my i cloud back up when i restore old back up my problem exact with contact cause it disappears from contact list

iPhone: Transferring information from your current iPhone to a new iPhone

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980's and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my

I need your help with a decision to use iPhoto. I have been a PC user since the mid 1980’s and more recently have used ACDSee to manage my photo images and Photoshop to edit them. I have used ProShow Gold to create slideshows. I am comfortable with my own folder and file naming conventions. I currently have over 23,000 images of which around 60% are scans going back 75 years. Since I keep a copy of the originals, the storage requirements for over 46,000 images is huge. 180GB plus.
I now have a Macbook Pro and will add an iMac when the new models arrive. For my photos, I want to stay with Photoshop which also gives me the Bridge. The only obvious reason to use iPhoto is to take advantage of Faces and the link to iMovie to make slideshows. What am I missing and is using iPhoto worth the effort?
If I choose to use iPhoto, I am not certain whether I need to load the originals and the edited versions. I suspect that just the latter is sufficient. If I set PhotoShop as my external editor, I presume that iPhoto will keep track of all changes moving forward. However, over 23,000 images in iPhoto makes me twitchy and they are appear hidden within iPhoto. In the past, I have experienced syncing problems with, and database errors in, large databases. If I break up the images into a number of projects, I loose the value of Faces reaching back over time.
Some guidance and insight would be appreciated. I have a number of Faces questions which I will save for later.

Bridge and Photoshop is a common file-based management system. (Not sure why you'd have used ACDSEE as well as Bridge.) In any event, it's on the way out. You won't be using it in 5 years time.
Up to this the lack of processing power on your computer left no choice but to organise this way. But file based organisation is as sensible as organising a Shoe Warehouse based on the colour of the boxes. It's also ultimately data-destructive.
Modern systems are Database driven. Files are managed, Images imported, virtual versions, lossless processing and unlimited editing are the way forward.
For a Photographer Photoshop is overkill. It's an enormously powerful app, a staple of the Graphic Designers' trade. A Photographer uses maybe 15% to 20% of its capability.
Apps like iPhoto, Lightroom, Aperture are the way forward - for photographers. There's the 20% of Photoshop that shooters actually use, coupled with management and lossless processing. Pop over to the Aperture or Lightroom forums (on the Adobe site) and one comment shows up over and over again... "Since I started using Aperture/ Lightroom I hardly ever use Photoshop any more..." and if there is a job that these apps can do, then the (much) cheaper Elements will do it.
The change is not easy though, especially if you have a long-standing and well thought out filing system of your own. The first thing I would strongly advise is that you experiment before making any decisions. So I would create a Library, import 300 or 400 shots and play. You might as well do this in iPhoto to begin with - though if you’re a serious hobbyist or a Pro then you'll find yourself looking further afield pretty soon. iPhoto is good for the family snapper, taking shots at birthdays and sharing them with friends and family.
Next: If you're going to successfully use these apps you need to make a leap: Your files are not your Photos.
The illustration I use is as follows: In my iTunes Library I have a file called 'Let_it_Be_The_Beatles.mp3'. So what is that, exactly? It's not the song. The Beatles never wrote an mp3. They wrote a tune and lyrics. They recorded it and a copy of that recording is stored in the mp3 file. So the file is just a container for the recording. That container is designed in a specific way attuned to the characteristics and requirements of the data. Hence, mp3.
Similarly, that Jpeg is not your photo, it's a container designed to hold that kind of data. iPhoto is all about the data and not about the container. So, regardless of where you choose to store the file, iPhoto will manage the photo, edit the photo, add metadata to the Photo but never touch the file. If you choose to export - unless you specifically choose to export the original - iPhoto will export the Photo into a new container - a new file containing the photo.
When you process an image in iPhoto the file is never touched, instead your decisions are recorded in the database. When you view the image then the Master is presented with these decisions applied to it. That's why it's lossless. You can also have multiple versions and waste no disk space because they are all just listings in the database.
These apps replace the Finder (File Browser) for managing your Photos. They become the Go-To app for anything to do with your photos. They replace Bridge too as they become a front-end for Photoshop.
So, want to use a photo for something - Export it. Choose the format, size and quality you want and there it is. If you're emailing, uploading to websites then these apps have a "good enough for most things" version called the Preview - this will be missing some metadata.
So it's a big change from a file-based to Photo-based management, from editing files to processing Photos and it's worth thinking it through before you decide.

I need your help with buying one of your software programs.

I need your help with buying one of your software programs.
First of all I do not want to join this “Creative Cloud” for a monthly plan.
Adobe Illustrator CS6 is what I am wanting but every time I click on the buy button is keeps sending me to a rent page to use but I don’t want this I want to buy it program for my own use. I don’t want to rent it I want to buy it like all the other Adobe software programs that I have bought from you in the past.
Can you help with problem?
Tim Adams
[email protected]

You can buy CS6 from this page
Creative Suite 6

Need your help with the SaveAs function plz

Good day everyone,
I need your help yet again to figure out if what im trying to acomplish is even possible within Livecycle designer.
My issue is simple in nature, prevent the SaveAs "open window" to show up when they press the disk icon or use the saveAs option from the File menu if some of my fields are not fill-in.
To do so, i placed the code into the Pre-save area of my form and that code checks if certain fileds are filled-in are not.
If there not, i want to tell the user to fix this before the SaveAs occurs.
But right now, the problem is that the "SaveAs open" window shows up FIRST i have to tell where i will save the file and all that good stuff and THEN my code gets activated.
I was able to create my onw SaveAs button and it works well, the problem is that i want to also capture any save's that are executed around the form (the disk icon, the SaveAs in the FileMenu and the Ctrl+s)
Is there a way to do just that? right now i would be ok in just being able to tell Livecycle to cancel the SaveAs action if that was possible, but i cant find anyway of doing that neither
Your help is always appreciated
Thanx a lot.

I am having same problem with a 2011 year tax PDF fill in form I JUST got from IRS website.
The actual form is the 2011 8829.
I am running Windows 7 64 bit, Adobe Reader X version 10.1.4.
After trying to open the doc (nothing displays) I go to properties, and it says ...
Title: 2011 Form 8829
Author: SE:W:CAR:MP
Created: 12/23/2008
PDF Producer: Adobe LiveCycle DSesigner ES 8.2.
PDF Version: 1.7 (Acrobat 8.x)
Tagged PDF: No
Fast Web View: No
Yikes ... was hospitalized last year ... now I have 9 days to file.

HT201210 please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins but then it shows unknown error 101

please,I need your help ! I was updating my iphone ios to ios4.2 and then problems begins when it shows that it needs to restore the factory software to I was trying to restore ,but that didn't happen it begins restoring but then it shows unknown error 1015

Stop being impatient.
From the article that the question was posted from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.
You cannot downgrade.
If you have a 3GS, you can only install iOS 6.1.3 which is the current version of iOS for the device.

HT5622 I have reset my iPhone, but later I could not activate it, it's not accepting my ID / Password. I restored it but still having the same problem. I need your help. Thank you.

I have reset my iPhone, but later I could not activate it, it's not accepting my ID / Password. I restored it but still having the same problem. I need your help. Thank you.

Try making a new Apple ID? I don't really understand what you mean.. Make a new apple ID, log in with that one and then when you are on your phone log out of it and THEN log in our old ID? If you still can't log in the old one then it's most probably a bug or something.. Anyway.. Good luck with your problem!!

Having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online

having problem buying online.need your help since it's my first time here.apple is asking for my billing address but when i enter my address here in qatar,it's saying i should enter a valid zip code within the u.s.does it mean i can't buy online even if it wil be shipped within u.s. only?

To buy in for delivery in Qatar, you should be starting from the Apple Qatar site:
http://www.apple.com/qa/
Do you have an Apple-ID? if you do, then you should not have to enter your Address again, and may be able to sidestep the US Zip Code issue.

I need your help with solving a non-standard solutions.

Hello!
I need your help with solving a non-standard solutions.
My name is Andrii and I represent the civil charity. Not so long ago, one man gave us the iPhone 4S (as a donation).
But later - it became known that this iPhone can not work with SIM cards Ukrainian mobile network operators, as it is blocked by Verizon.
Is there a way to unlock it with your help, and how it can be done?
I hope for your understanding and assistance in this matter!
Thank you.

Contact a third party unlocking service.
Purchase an unlocking code.

HT201210 I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

I tried to update to IPad 5.1, but when it finished and tried to restore the backup, it shows me that Itunes could not back up because a session could not be started with iPad. need your help please

This has happened to me a couple of times and what I do is quit iTunes and restart my Mac and then try again and then it will work.
If iTunes has already created the backup, you should still be able to restore from the backup when you are connected to iTunes. Right click on the iPad name on the left side of iTunes and select restore from backup. After the process completes, sync with iTunes to transfer all of your apps, music, photos and other media back onto the iPad.

Problems with my eMac. NEED YOUR HELP!

Similar Messages

Maybe you are looking for