Problems with my megaworks 5.1!!..pls help

hi there everyone.i own a set of megaworks thx 5.1 speakers which i bought nearly 3 years ago.everything was fine and smooth while i was using the speakers, until recently, to my disappointment, when i switched on the power supply, the led on the remote was lit on green( it was supposed to be on standby mode once u have plugged off the speakers right?), which really got me baffled for a while.then suddenly, there was a loud clipping sound and the set turned off on its own.i suspected the fuse was blown and checked it, and really it was blown.so, i changed it , exactly of the same type of fuse.but again, in seconds, there was a loud clipping sound and it went off again...again and again i tried till i gave up.i bought this set in kuala lumpur and i wonder how could i get this fixed and where should i bring this thing to...and by the way guys..if u ppl have any idea what;s wrong with my set, plz do tell me...hope u guys can help...

Creative Labs Sdn Bhd
Office:603-264799
Fax:603-264798
Creative Labs Sdn Bhd Customer Support Services
22 Jalan Imbi Unit 06 Level Amoda 5500 KUALA LUMPUR
MALAYSIA
http://forum.lowyat.net/topic/244027/+80?

Similar Messages

  • Problem with determining suitable audio driver,pls help me.

    Hello,
    I have hp pavilion dv2690ee , and when i install windows xp , i used this driver for audio device sp34386.exe , though my cpu is intel.
    But i replaced motherboard, now when i install sp34386.exe , this message appear "driver installation failed could not find the media device for this driver" , how can i know my new motherboard model, or which model my motherboard is compatible with it?
    Note : i am using linux os , and it detect this audio device model: 82801H (ICH8 Family) HD Audio Controller

    Hi:
    Did you first install the MS UAA driver?  If you didn't that is probably your problem.
    See the guide on this link under Moderate Models. There is a guide for installing the audio drivers.
    http://h30434.www3.hp.com/t5/Operating-systems-and-software/General-XP-Downgrade-Guide-for-HP-Laptop...
    Paul

  • HT4009 Problem with in apps purchase. Pls help

    Since about a week now I can no longer purchase gems in fashion story or my bakery.     I do not have a restriction set up in my iPad.     Previous billing went through okay I think.  I get message. Contact iTunes support to complete this transaction but I cannot find any relevant support link in iTunes.  Who do I contact.  Help

    See : https://discussions.apple.com/thread/4007091?tstart=0

  • Hey, I had met a problem with installation. Can any one help me?

    Hi everyone, I'm an user of Windows 7(64 bit),
    I had just download "Master Collection CS5.5"
    Everything are fine but Adobe Acrobat Professional can't install on my computer.
    There are the details..:
    Exit Code: 6
    -------------------------------------- Summary --------------------------------------
    - 0 fatal error(s), 4 error(s), 1 warning(s)
    WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}
    ----------- Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0 -----------
    ERROR: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: Install MSI payload failed with error: 1603 - 安裝時發生嚴重錯誤。
    MSI Error message: Error 1324.The path R嶰up廨er un document num廨is?sur un multifonction.sequ or the volume is invalid. Please enter it again.
    ERROR: DW050: The following payload errors were found during install:
    ERROR: DW050:  - Acrobat Professional: Install failed
    Thanks

    Re: Hey, I had met a problem with installation. Can any one help me?
    This worked for an English version and the concept should work with all Adobe programs - new or old (hopefully in any language). My guess is that you have/had an older version of Acrobat/Reader on your computer hard drive that needs to be *completely* removed first. Uninstall the new (and any old) Acrobat; then try using the "kb2..." guideline link below before reinstalling the new Acrobat. I am including the lengthy instructions in order to help others with more extensive installation problems. Good luck!
    I live on a fixed income and use CS for a hobby. I had problem installing Adobe Creative Suite (CS1) to Windows 7 64-bit Pro on my new computer. Also installed Adobe Photoshop LR3. What I learned: All Adobe products (Flash, Acrobat/Reader, Photoshop, Creative Suites, etc.) leave a VERY pervasive footprint on your hard drive. Logic finally worked for me.... think of building a house; there is an order you have to do things in. First, you have to clean the area before laying the foundation; then you have to build the framework before you put the roof on. You cannot install an older program over ANY newer program; and you will sometimes have a problem installing a newer program containing Flash, Reader, etc. unless you "erase" the older versions of Flash, Reader beforehand. If installing older programs, do a Custom/Manual install; do not install older versions of Flash, Reader, etc.  packaged with your Adobe software.
    SOLUTION (not easy, but it works):
    I first tried this; it did not solve my problem (but, if applicable, may help others).  http://windows.microsoft.com/en-us/windows7/Make-older-programs-run-in-this-version-of-Win dows
    Before doing anything, make document and any database/presets/cache back-ups beforehand (keep notes on their designated location*); manually create a System Restore point. (Be prepared to reinstall Windows if necessary - I didn't have to.)
    Completely and meticulously eradicate (clean) your hard drive of ALL Adobe programs [uninstall, remove remaining folders, and remove only the registry entries that have the Adobe name attached (unless you are an expert and fully understand the other entries)]. Use this as a guideline  http://kb2.adobe.com/cps/400/kb400769.html
    Do a Custom/Manual reinstall of all your Adobe products *in order of release dates* (OLDEST first).... do not include Reader, Flash, etc. If your CD will not automatically run at this point, click "Open folder to view files" (use Computer/Windows Explorer, if necessary). Click "Adobe Creative Suite (or your desired program) ==> Setup.exe" (IMPORTANT: Make sure that Reader, Flash, etc. are unchecked.)
    After each of your desired Adobe programs are installed, test to insure they boot up. Then download the latest Reader, Flash, etc. apps and install them (I did this in order of release date - oldest first). Do test boot(s) again.
    Copy/Paste your document and any database/presets/cache back-ups into the appropriate folders (*this will vary depending on your programs and your filing system).
    It has been four weeks and all my Adobe programs work flawlessly - system is stable, no problems!

  • Lightroom doesn't recognize mine camera Nikon  D800 E to shoot tethering. There is no problem with mine laptop. Can you help me?

    Lightroom doesn't recognize mine camera, the Nikon D800 E to shoot tethering. There is no problem with mine laptop. Can you help me with this issue?
    Ronald ( the Netherlands)

    Sure the laptop know's that the Nikon D800E is connected, but lightroom doesn't recognise this camera. Two weeks a go it wasn't a problem at all.

  • Acrobat reader 7 I downloaded didn't compatible with my laptop Windows 8, pls help!!

    Dear friends,
    My name is Terry.
    Acrobat reader 7 I downloaded didn't compatible with my laptop Windows 8, pls help!!
    Thanx.

    Why are you trying to install the outdated Reader 7?
    The current version is the free Adobe Reader XI
    PDF reader, PDF viewer | Adobe Reader XI

  • Videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

    videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

    videos becoming pixelated on win8.1 while does not happen with crome pepper base flash. pls help me to resolve this issue

  • Why I got this email if I didn't schedule any storage plan ? This is the email I got;        On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me

    Why I got this email if I didn't schedule any storage plan ? This is the email I got;       
    On 10/07/2013 you are scheduled to be charged $20.00 for your 10 GB iCloud storage plan, but there is a problem with your payment information, Can someone help me ? I don't want to be charge for something I don't want to buy.

    You may want to do couple things
    1. cancel auto renewal for icloud - instructions here -under downgrade storage
    http://support.apple.com/kb/HT4874
    2. change your payment info in itunes, to either none or other payment method - instructions here
    http://support.apple.com/kb/ht1918

  • I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    I have a new iphone6+  and have paired it to my 3 cars. When playing music from my iphone, the volume is very low and I have to turn the car volume to max to listen. I had no issues with previous iphone parings. Pls help.

    Sorry if this is too basic or confusing
    Apparently in iOS 8 there are different volume settings for different applications
    The setting on the home screen does not carry over to Pandora for example and it is different ( or at least appears to be) for the in-car experience.
    So I would try to stream the music when not in the car - see if you can turn the volume up and then try again in the car
    Please let us know what happens
    Thanks

  • Pls: I have some problems with GOP java card. who can help me?

    hello, all
    I am going to install my cap file into Global Open Platform Card( S1-TiEx-S32J, which uses GP2.0.1) now.
    but, I have failed.
    I use J2SDK1.4.2.10 when I compile the java file.
    And use Java Card 2.2.1 Development Kit when I convert to cap file.
    The sequences of the command / response are below;
    [SEND]00A4040007A0000000030000
    [RECV]611F
    [SEND]00C000001F
    [RECV]6F188408A000000003000000A50D9F6E0A42505042474F317601019F6501FE9000
    [SEND]80500000082021222324252627
    [RECV]611C
    [SEND]00C000001C
    [RECV]0000FFFFFFFFFFFFFFFF0000E1C81BD9C2573DF5AA8EEB95251A95A59000
    [SEND]8482000010A8BD185CD6A3940C83855021A4DFF412
    [RECV]9000
    [SEND]80E60200050000000000
    [RECV]6700
    What was wrong?
    If you are experience with this kind of java card, pls help me.
    with best regards,
    yong lee

    Andalib3,
    There are a couple of options that you have as far as getting this to work. First off go to Control Panel and then to Sounds and Audio Devices (or multimedia depending on the version of windows). In here go to the Audio tab and then under preferred Midi Playback Device you should have a couple of options. There are two settings here that will work:
    ) Microsoft GS Wavetable Synth - This is a very basic midi sound set that is emulated by the OS
    2) Li've! Midi Synth (A or B) - This is the hardware midi synth on the card.
    Make sure one of these is selected as the default midi playback device and then test your games again.
    Jeremy

  • Sound Problems with Mainbord....Please help!

    MSI K8N SLI Platinum nForce4 Ultra 4DDR-DIMM 3PCI 3PCIe SATA-II Raid Audio GB-LAN Firewire Socket939 ATX
    Hi are having huge problems with my sound.
    Got all the gadgets last week. And have built the computer now. Everything is installed, all the drivers i got with the Box.
    Now the problem is that the sound i very "crappy". It sound´s  like a broken speaker. i have tried with different speakers and the problem persist.
    Ive tried changing drivers and all that, and checked all setting. But nothing changes...
    I get sound, but it sounds like hell. Cant almost not hear what´s playing or what are said through the speaker.
    Is it a hardware problem, something broken on Mainbord??????
    Somebody know?
    Please help.

    Just as a suggestion. . . .
    I would remove the soundcard and clean the edge pin connectors.  The "static" type sound could be comming from a resistive connection in the edge connector.  You may also try running dxdiag from your "start / run" menu and see if the sound results are better.
    Also, (even though the sound card is new), you may want to blow out the pin connector in the back of the card (where you plug in your speakers) and try reseating your speaker cable again.
    Someone above mentioned power.  That could easily be an issue if you have alot of hardware and a power supply that is not up to par with your gear.
    EDIT:  For some reason, I thought you had a soundblaster card.  So, pls forgive the card removal information.  just trying to help!
    Just some stuff to check. . . GL!
    doggy

  • Trying to download iOS 5 it says there is a problem with my Windows Installer Package?Help?

    I'm trying to download the iOS 5 and I get almost all the way done but then it stops when it's on Status and goes to an error and says "There is a problem with this windows Installer Package.  A program run as part of the set up did not finish as expected.  Contact your support personnel or package vendor."  I have a windows vista computer.. but it should be able to run on it...
    Any ideas on how to fix this??
    Thanks!!

    'NOsaint09' - I was getting your same error message trying to install the iTunes 10.5 update on my Windows XP machine (in order to install iOS 5 on my iPhone 4). Tried uninstalling and reinstalling iTunes several times to no avail - same message, no install.
    Well, after reading the above post by 'wiss...' i went to start Apple Software Update and was getting another (very cryptic) error message just trying to start ASU. I thought perhaps the problem with this program was causing iTunes 10.5 not to install - so I went to uninstall Apple Software Update using Windows Add/Remove Programs, and got another error message (not allowing the uninstall)!
    Knowing there are programs out there just for the purpose of doing a forced & thorough uninstall, I search Cnet Downloads for the best free Uninstaller and downloaded Revo Uninstaller. Used Revo to uninstall Apple Software Update (and all associated files/data it found in registry).
    Then to be sure, ran Disk Cleanup in windows to empty the Temp files/folders and Restarted the computer.
    Finally, I ran the iTunes Setup.exe for 10.5 and it installed successfully!!  Woohoo! I hope my experience may help others with similar troubles!
    And thanks to Wiss for directing me to the problematic ASU program!

  • The mail application on my I-Mac dates all mail, whether sent or received, as 5th (of whatever month it is). The computer clock is working, so it's not that. And the time seems to be right. I have no problem with my MacBook. Can anyone help, please?

    The mail application on my I-Mac dates all emails, in or out, as 5th (of whatever month it is). It seems to get the time right.
    The computer clock is fine. I have no problem with my MacBook - just with the I-Mac. Any ideas, please?

    OK Vicky, good clues...
    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • Very frustrating problem with Photoshop Elements 10 - can anyone help?

    I don't know what's happened, and I haven't changed any of the settings or anything.
    When I open a photoshop file I am currently working on, now, no matter what I do, nothing changes in the actual photo. Even when I delete layers to see if it reverts back to the original photo, nothing changes. When I try adding new layers, nothing happens, when I try adjusting something such as opacity, or brightness/saturation, nothing changes.
    I've tried opening/creating other photoshop files and I have the same problem, so it seems a problem with the actual software, rather than individual files. Even after uninstalling then installing the software, the problem is still there.
    Does anyone have any idea what is causing this? Or could you direct me to a good help forum/source?
    Many thanks

    Welcome to the forum.
    I would go to the Photoshop Elements Forum, and look for Loraclf's post there, or post with your problem, your equipment info, and the problem. Someone there will be able to help you.
    Good luck,
    Hunt

  • Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Got a new iPhone today and tried to restore from my old phone using icloud but kept coming up with a message that said problem with my icloud back up please help

    Hi there Clairemcaula,
    You may find the troubleshooting steps in the article below helpful.
    iCloud: Troubleshooting restoring an iCloud backup
    http://support.apple.com/kb/ts4036
    -Griff W. 

  • There's a problem with my Asha 200. Please help.

    my asha 200 has totally been disorganised,the social apps nolonger works and i can nolonger access the internet using my phone,the homescreen is faulty and some apps keep freezin,i tried to update the software but it tells me no software and no software provider available؛pliz help
    Moderator's Note: We have moved your post and changed the title into a subject-related title. This is to keep the forum organized and let other forum users easily see and respond to this post.

    Ashtin123 wrote:
    There's a problem with my pervious purchase..
    Then you need to Contact iTunes Customer Service
    Use this Link  >  Apple  Support  iTunes Store  Contact

Maybe you are looking for

  • New router and can not connect wirelessly

    Installed a new router that changed my security from a WEP to a WPA2. I have connected to the printer(7410) through ethernet cable and changed the security settings but the printer will not connect to my router. I am currently printing by ethernet ca

  • Recover RAID 5 array with new root drive

    Ok, I have a root mirror and a 4 drive RAID 5 array on an E250. The linker got hosed on the root partition and mount fails as a result. I've tried repairing the linker to no avail. So I replaced c0t0d0 with a brand new drive and put a fresh install o

  • Screen goes down when pressed in the corner?

    Basically, in the bottom right hand corner of my iPod, I can press down, and the screen will go down? Get what I mean? It doesn't happen in any of the other causes, and just wondered if there is anything I can do about it, or if it could cause furthe

  • After hooking up AirPort Extreme, I cannot get on the Internet

    Just installed AirPort Extreme.  After following instructions and turning power off several times in attempt to reset, I still cannot get back on the Internet. Does anyone have any ideas?

  • Packets sent out on wrong interface

    We have a BM 3.9 SP1 server configured with two public interfaces which are Interface 1 XXX.XXX.138.178 mask 255.255.255.240 with a secondary IP address of XXX.XXX.138.179 and is has the default route of XXX.XXX.138.177. Interface 2 XXX.XXX.146.218 m