Problems with my new 6500A wireless printer

I have a Linksys E3000 router, running Windows 7 Ultimate, and have my desktop hardwired to the router and ran the setup wizard on the printer, printed out the Network page and it had a IP address listed on the sheet.  Ran the software on the Computer and the software could not find the printer.  Ran that setup several times to no solution.  Am I missing something or is there something to correct this issue? Thanks

Try this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
I would guess that your security system (antivirus) firewall is in the way.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Problem with Time Capsule and Wireless Printing (Mac+PC Mixed)

    I have a time capsule that is the wireless router for the house and my iMac and laptops use the wireless network beautifully. I installed a Dell 1320C color laser printer by connecting it to the usb port on the time capsule. The airport express utility did NOT recognize any USB printer connected to the time capsule. I was however able to wireless print from my iMac by asking the printer utility to find all available printers which it did and then installing the printer drivers (thanks google). So, while i cannot find my printer as being connected to the time capsule through the airport utility, i can find it through the print utility as a connection through bonjour and i can print just fine to it.
    Now i installed bonjour on my laptops and found and selected the 1320c just fine. When i try to print through the laptops (pc), nothing happens and the file stays in the print queue.
    I am willing to live with the first quirk as I can print wirelessly from the iMac. I however need help to print from the laptops.
    Any suggestions?
    thank you so much in advance
    Mukund

    Mukund SRINIVASAN wrote:
    Once I connect the printer via ethernet to the time capsule, how do I
    1) see the printer on my iMAC - what utility do I run etc?
    It is connected to your network. Check your printer setup manual on how to set it up. Or go the the Dell website for printer support if you can't find your manual.
    2) can i then run bonjour from my windows laptops and see the printer through the network?
    Via ethernet, it shouldn't need Bonjour to set up.

  • Problems with re-installing HP wireless printing upgrade kit

    I had to return my Dell Inspiron 6400 to original factory settings and since then I cannot install the wireless printing upgrade kit. It says it cannot recognise the pc adapter even though Windows has installed the driver automatically for it. So hangs and won't install. I'm trying to get wireless connection for a HP Laserjet CP1215. Any ideas most welcome!

    Hi, No hardware kit. The following driver is for Windows 8.1:    http://ftp.hp.com/pub/softlib/software12/COL32135/bi-109984-2/OJ_SF_K8600_140_408-4.exe Most likely this will work with Windows 10 for printers which are less than 3 years old. Regards.

  • Problem with Officejet Pro 8600 wireless printing

    HP Officejet Pro 8600 will no longer print wirelessly from laptop, but will from IPad and Android phone using Samsung and Google Print. Used to work fine. Unaware of any changes to settings in either printer or computer setup. Have gone thru all trouble shooting steps including rebooting computer, router, and printer. Computer is connected to internet and bluetooth is on and working. Computer finds the printer but says it's offline.  Printer settings say printer wireless is on and is connected to network but wireless light will not illuminate.
    As you can tell, I'm no expert. Experienced user, but not in wireless issues. Computer is Windows 8.1. I've read all the support info on this problem on the HP website and taken as many steps as looked appropriate (or I understood). Everything so far looks nominal except for the wireless light on the printer.
    Any thoughts?

    Well, I finally got it to work by resetting and rebooting everything, starting with the modem/router, then laptop, I-Pad, and Android phone. Wireless light on the printer doesn't seem to be an issue. My Att DSL line is spotty at best, giving the modem not much to work with. The interaction of all the elements is complex given the demands I put on them. I'm 75 and have owned so many computers and peripherals since 1982 that I've lost count of them. But they haven't gotten easier to work with. I should have taken training as a network administrator rather than real estate!

  • Problem with a new WRT54G wireless router

    Hello. I recently purchased the WRT54G router to use in my home. Previously I had a desktop that was wired directly into the internet through a Comcast cable modem connection. I got a laptop and wanted to get it online as well, so I got the wireless router. Since installing and hooking up the router my internet on the desktop hangs. I do a bit of gaming, and it seems to come in almost regular intervals where I'll lose connection for one to three seconds at a time. I have the router hooked up such that my desktop is still hardwired, but coming out of the router. I tried to connect my desktop to the router wirelessly to see if this would remedy the problem, but it did notThis is quite frustrating and I've been unable to find anything that may be the cause of this. It also seems to happen on my laptop while browsing. I'll click a link and the browser will hang, unable to go anywhere, then I'll click again and it will go right through. If anyone else has had this problem or knows some way to fix it I'd love to hear about it. Thanks much Message Edited by Pezmage on 02-06-2008 04:49 PM
    Message Edited by Pezmage on 02-06-2008 04:50 PM

    Try updating firmware. Reduce MTU to 1350, and disable block internet requests in security tab.

  • HT4356 I was gifted a new Samsung wireless printer model ML-2165W, it works with my desk top and lap top but can't get it to work with IPad.  Did I just receive a "boat anchor" printer in the eyes of Apple?

    I was recently gifted a new Samsung wireless printer Model # ML-2165W and while it works fine with all my computers, I can't make it print from my IPAD.  Was I given a "boat anchor" in the eyes of Apple?

    It looks like your printer isn't on the list of air print enabled printers. It'll still work, you just need to do some tweaking.
    You can see if samsung has any apps to enable printing.
    or
    You can look into a third party app like Print n Share or Print Central.
    Then you can print from your iPad.

  • Photoshop Elements 12 no longer see's my scanner.  So I cannot scan my pictures, help.  Windows 8.1 with HP Officejet 6500A Plus printer.  Scanner works with other programs in my PC.  Problem is PS12

    So I cannot scan my pictures, help.  Windows 8.1 with HP Officejet 6500A Plus printer.  Scanner works with other programs in my PC.  Problem is PS12

    I bought the Officejet 6500A Plus about one month and have experienced the very same problem. I tried to remedy this problem following suggestions in a number of different posts (static IP, router, firewalls etc), all to no avail. Last week I called support. The support I received by the tech over several hours and different days for a week was very good. However none of his suggestions corrected the connection issue. After today's recommended fix failed, he advised HP is aware of this issue with the 6500 and other affected printers. He claimed HP was working on a firmware upgrade. He did not know when the update would be provided. The tech also claimed HP acknowledged this problem in a written announcement. He agreed to email the announcement to me. I haven't received it. This has been the only problem I've had with the 6500

  • Problems with brand new LaserJet 1102w

    I've had my LaserJet 1102w for two days now, and I'm, so far, regretting the purchase and considering sending it back.  Here's why:
    1.  It shuts itself off after about 10 minutes and will not print after that until someone manually pushed the power button.
    2.  When first turned on, it will only print the first few inches of any given page (built-in Config test page included), then it blinks it's orange light.  If you turn it off and on, try again, then turn it off and on a SECOND time, it will print normally.
    3.  It consisitantly fails to print "larger" files (I quote it because it's not that large..  i.e. a 32MB PDF) -- they gets stuck and require a complete reboot of the printer.
    The only issue I don't see to have is it dropping Wireless...  which is good because we don't have ANY wired devices in our house (which is why I purchased this printer...  most of the devices are iOS, though I'm working on  Win7 laptop at the moment).
    I would love some advice or help getting this printer to work.
    Thanks!
    *EDIT:  I've made sure it's updated to the lasted firmware and that I'm using the most up-to-date driver - both obtained from the HP site.
    This question was solved.
    View Solution.

    This sounds like a problem with sleep mode on the printer.  There are a few things you can do to try correct this problem.  First, make sure the printer is plugged directly into a wall outlet.  If you plug it into a surge protector, power strip, or power backup, it can prevent the printer from getting enough power.  If that's okay, then move on to trying the steps in the document linked below.  If nothing works, then contact HP to see about a replacement printer, or return the printer to where you purchased it, either way, you will need to replace the printer.
    The Printer Will Not Turn On or Respond
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • I have a problem with my new battey!!

    Hi,
    I have burshaced a new battery just two days a go.
    My new battery is:
    hp 12-cell multi-charge extended battery (ks527aa)
    In its specifications I have found that it works up to 8 houers, it worked with me just for 3 houers befoe it needed to recharge!!
    My labtop is Hp dv6 2170ee.
    Is there any problems with my new battery?!!
    please help me.
    Thank you so much in advance,
    Best regards,
    Aya.
    This question was solved.
    View Solution.

    Notice the "up to"....you can get 8 hours if the laptop is asleep and you don't use it but if you actually use it and espescially if you use wireless and have the screen on full bright, 3 hours is very good for a full-sized powerful laptop. Run it down to 20% and recharge it a few times to let Windows calibrate the battery and the run time will stretch a bit, but 5 hours is a home run and 3.5 hours is acceptable on that class of laptop. Here are a few tricks you can use to stretch the battery as far as possible:
    http://www8.hp.com/h20621/video-gallery/us/en/customer-care/1640737838001/tips-for-extending-hp-note...

  • Problems with Itunes New Version?

    Problems with Itunes New Version?
    Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
    <edited by host>
    Thanks,
    <edited by host>
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 1
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0

    There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • Problems with the new Pages.

    Hi everyone.
    I wonder if i am the only one experiencing a little problem with the new Pages?
    My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
    Anyone else tried this?
    Martin.

    VladRO wrote:
    These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
    Instead of starting a new list, go to
    https://discussions.apple.com/thread/5468056?tstart=0

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

  • I am having email problems with the new Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help

    I am having email problems with the new Mountain Lion.  stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely.  Help
    Incoming Mail (IMAP) Server - requires SSL:
    imap.gmail.com
    Use SSL: Yes
    Port: 993
    Outgoing Mail (SMTP) Server - requires TLS:
    smtp.gmail.com (use authentication)
    Use Authentication: Yes
    Use STARTTLS: Yes (some clients call this SSL)
    Port: 465 or 587
    Account Name:
    your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
    Email Address:
    your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
    Password:
    your Gmail password
    The Quick Answer
    Follow the instructions below to set up IMAP1 access in most email clients.
    Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
    this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option?  The next page under ADVANCED: THERE IS A BOX SSL MARKED.  Then IMAP Path Prefix - I put stmp.gmail.com.. is that right?  Port 993 can  use this one? as 456 doesn't work and 587 said it wasn't safe.  Under AUTHENTICATION I used PASSWORD.  Should I have used external client cert TLS?
    Please help me set this up securely. Thanks

    Apple - Support - Mail Setup Assistant

Maybe you are looking for