Problems with my new imac 27"

Hi! i got last day, the new imac and i have some little problems
1) I have a an usb 3.0 HD connected to a 3.0 hub. the hd isnt recognized from imac. i also tried to switch ports and disconnect other peripherals but the result its always the same. i resolved using an usb 2.0 cable but its not a deal considering first itme in my life i have a usb 3.0 pc and i cant use it. the same configuration worked without any problems on my old macbook, but in that case, it was usb 2.0. which can be the problem? too much bandwith? i also use a thunderbolt ssd as my primary drive. but i dont think thunderbolt and usb share same bandwith
2) i have connected the imac to a AV receiver for listening music and sometimes movies. with my old macbook i did that with optical cable for audio and hdmi for video but now i have both with one cable. problem is that if i duplicate monitors, the imac resolution switches to 1920x1080. only way is the extend desktop. in this way i have 2560x1440 on imac and 1920x1080 on tv, but its a pain in the *** when mouse pointer goes away to the secondary monitor (turned off, or unused). is there  a way to enable ONLY audio hdmi, or to block secondary monitor?
3) i connected imac via lan but in that way my wifi (not airprint) printer isnt recognized, so i switched again to wi-fi. is there a way to use lan without problems?
thanks

1) not enough information to know what the problem is. Could be cable, could be hard drive enclosure, could be computer. check this article - going thru these troubleshooting steps may solve the problem if it is the computer.
2) I don't know
3) how is the printer connected to your network? Is there an unbroken line of Ethernet connections between the computer and the printer? If another computer is connected to that cable can it see the printer?

Similar Messages

  • Problem with brand new Imac, please help

    I was suggested that it would be best for me to post this topic here in this forum.
    Hi I am new to Mac, I had just gotten my 17" imac isight last week, for the most part i am very happy with it. But last night I was having some troubles with it. I had been online and was using Firefox as my browser....I went on one website and all of a sudden my mac froze up, the cursor changed to a spinning colored pinwheel and i couldn't click out of the page at all. In the upper right hand corner of the webpage which i didn't notice when i originally went on it was a message saying "you've been owned noobie"....my only guess was that this person's page had been hacked.
    I tried manually shutting down the imac, when it came back on I could not do anything. Firefox and Safari kept shutting down, and even when i tried going into System Peferences it kept closing on me. I tried shutting down at one point and the computer seemed like it was still on, the light in the lower right hand corner was going in and out. I tried starting up again and could not get onto the desktop, it was stuck on the blue screen. I tried holding the power button down in the back for a few seconds and i took the power cord out from the back for 30 seconds, after that it seemed to work fine.
    I am afraid that this may happen again, right now everything seems fine....has anyone else experienced this issue or has any insight on it? Is it a hardware problem or simply a bad webpage?
    I appreciate any help that you guys can give me!

    Hi and welcome to the wonderful world of iMacs. I too, just got the same iMac as you.
    Here are some new usesr tips & links to check out:
    - Get Applecare in the first 90 days.
    - Apple stores have Free classes, and online seminars & tutorials.
    A new service called: One to One for new users.
    http://www.apple.com/support/mac101/
    http://www.apple.com/support/tiger
    http://www.apple.com/pro
    http://www.apple.com/macatwork
    http://guide.apple.com/index.lasso (all made4mac apps, utilities,
    games etc.)
    **For new Switchers from Pc to Mac:
    http://www.apple.com/support/quickassist
    http://www.apple.com/support/switch101
    http://www.xvsxp.com
    http://www.switchingtomac.com
    - for comparisons of hardware and apps, etc.
    http://guides.macrumors.com/Mac_Beginner's_Guide
    ** For Questions, Problems, and lots of answers:
    - Always try the Help feature in the top menu of the finder and any
    app for lots of info. And, Spotlight, too.
    - try: macfixit.com forums and everymac.com, as well. They have
    excellent forums, and tutorials.
    * David Pogue's, The Missing Manual Series, of books are
    indispensable! Just make sure to get the correct version for your
    particular OS! Panther, Tiger, & Leopard. He has one just for
    Switching, from PC to Mac.
    - For more help try MacUser group in your area:
    http://www.apple.com/usergroups
    - You can also sign up for Kbase info from apple, too.
    http://search.info.apple.com
    - Check out the MacFixit Pro news, too. Tons of info.
    - Helpful tutorials:
    http://www.screencastsonline.com, http://www.howdoimac.com and http,
    www.learntomac.com
    - http://www.macinstruct.com
    - software resource:http://www.iusethis.com
    Have Fun,
    Cali-Kate
    New iMac Intel 17" Core 2 Dou, 2.0Ghz, 1G Ram, 160G HD   Mac OS X (10.4.7)   500mhz Cube, 1.2g ram, 120g HD, Geforce2MX, iSticks + iSub

  • Problems with brand new iMac

    I have a brand new iMac and my safari can't open my gmail my faceboook, can't dowload flash player because something with the antivirus, can't set my account on appstore, icloud! This never happend and I been using mac for 15 years

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
    Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
    Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
    Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
    The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    Test while in safe mode. Same problem?
    After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

  • Problems with my new imac

    Hello everyone, i bought my imac 27" a month ago, and within this month it has crashed around 6 time, the last three time has been after i open skype!!. I need your help pleaseeee!. Never happened with old imac!

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged before the boot, while the system was unresponsive or was failing to shut down. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). Please include the BOOT_TIME message at the end of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Sound Problems With Brand New 24" iMac!

    1) My new iMac has suddenly stopped making alert sounds, such as for incoming Mail, no Mail etc.
    2) I cannot listen to any radio stations on iTunes any more - dead!
    Is there a problem with the new iMacs and sound?

    All of my other sounds (startup, iTunes purchased music etc.) worked fine. All of my preferences are set OK.
    Here's the odd thing: All of a sudden my alert sounds have come back and I can play SOME radio stations through iTunes, but not all.
    This is very strange!

  • I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding"

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

    I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?

  • What's wrong with the New  iMac's AirPort?

    Hello
    Last night I spent 4 hours trying to connect with my brand new wireless router (Netgear DG834PN). The one time I did connect and tried to configure using Netgear's Wizard (using Safari) my Mac's AirPort Extreme dropped the connection, never to return. The next 3hrs 55mins were spent trying to to get the two devices to connect. Unsuccessfully. Very frustrating!
    I even tried connecting the two devices via ethernet, and still no joy. What should I do? Is my new Mac's Built-in AirPort Extreme faulty? Is my new wireless router faulty? Any other testing suggestions welcome.
    I've have read, on this forum, about possible problems with the new aluminium iMac's AirPort. Is this a known fact or just a batch issue?
    *Many Thanks* (Apologies if I haven't explained myself very well, first post)
    Mike

    *Hi it's me again*
    Still no joy trying to connect to my router wirelessly via AirPort.
    *+(Xiaofan & Benderissimo)+* - I can't even get as far as logging into the router via a browser. AirPort literally can't see anything even thought it's switched on. This means I have no chance to change the channel or anything else. I'm stuck.
    Could AirPort be locked out or something?
    On the plus side I have connected to the internet via ethernet. It was no problem at all. I basically connected a length on Cat. 5 cable from port 1 at the back of the router and into my Mac, and *hey presto!* (broadband at full speed). Happy.
    The thing is I eventually want to move my iMac upstairs, this is when I need AirPort wireless to start working. I don't want to trail 100ft of Cat. 5 cable all round the house.
    What else can I try to make my built-in AirPort Extreme work?
    _*I'm Flummoxed, Apple help me.*_
    Message was edited by: Mike in the UK
    Message was edited by: Mike in the UK

  • Yes... There are issues with the new iMac, early adopters baby!

    Hi, I am a new iMac owner.
    Being a network engineer and having worked for the "devil" himself, let me tell you... I would rather be dealing with the tiny glitches with the new iMac than owning a Dell, Toshiba, HP but most importantly running Vista!
    This is a new machine with new HW and drivers. I enjoy trying the latest and the greatest. I realize there will be hurdles to overcome with any new product, but come one people! Let's stop whining, and help everyone out here. We are all here to provide constructive feedback to Apple while helping everyone out.
    Yes there Display issues.
    Yes there are Keyboard issues.
    Yes there are WoW issue and UT as well.
    Target disk issues.. Yes
    Lock ups.. sure!
    My suggestion... If you think you are better off with a PC and Vista, well go to it mate!
    Sorry for the ramble, but I just got tired of all the whiners thinking that buying an iMac was their solution to never having issues by leaving the PC world, or should I say MSWorld... LOL

    I think few, if any people claimed they were going to ditch their new iMac for a PC. I like Macs, but I don't love them like I used to.
    Half the reason people buy them, is because they think they can rely on Macs more. They are supposed to be stable, fuss free and easy to use. And they still are for the most part.
    But these new iMacs make a complete mockery of that because they don't represent very well what Apple stands for. "If" I bought a PC I would honestly expect some problems here & there. Its just part and parcel of the PC package. And although I don't expect Macs to be 100% perfect 100% of the time, I certainly expect better than this diabolical shambles that is the new iMac.
    Just as an example.. My 4 year old G4 powerbook.. Not 100% problem free, granted. But mighty close. However, it has not crashed once the entire time I have had it. My new iMac however, crashed 4 times yesterday alone, and it didn't even get used as much as my old powerbook.
    Maybe now you get the picture a little better?
    Just my 2 kernel panics worth...

  • Disappointed with the new iMac 2011

    I bought a new iMac 21.5 inch 2011 model replacing my plastic iMac. When I first bought it, I was very excited because it got all the top reviews.
    Then, my first iMac had 2 dead pixels on the top of the screen, it was very annoying so I got an exchange. The second one have no screen issues, but it has very annoying buzzing sound from the top of the back panel. Then I get the third exchange, and this one still has the annoying buzzing sound from the bottom part of the panel, and a notable dust particles trapped inside the screen encasing. I went to the apple store several times, they are saying they won't do any more exchange, and the buzzing sound is not noticable and it is the part of the nature of iMac.
    I am very disappointed with this iMac model, I am wondering if any other users have similar experience with the new iMac.
    Thanks for forum administrator keeping this post.

    I am like many users who wanted a machine for media development, wow, the Mac has a reputation for being good at that. However, I'm one who has had problems. I have never actually hated a machine before now. I am unable to multi-task, I have no software available for development except for the xcode IDE which changes weekly, rendering all highly expensive books and classes obsolete and useless within a week of purchase.
    Also, if you want to multi-task, I'm unable to load multiple tabs or browser windows without this machine halting to a crawl. I've spent at least a total of 20 hours on the phone with idiots who barely speak english to help me out. I've spent at least three full Saturdays at the so-called genius bar in town. I cannot load more than one application at a time and get decent performance. OMG, apple has set me back decades.
    Many will say this is probably due to my ISP. NO. I have my trusty HP machine here and I can actually boot it up and load the browser (IE) in the time it takes for an already booted iMac with Safari with a linked clicked before. So the ISP is great. It's the iMac that *****.
    One good thing that has come from this peice of sht though. It is a true test of my restraint and tolerance for crap.
    I am actually now willing to give up apple development altogether because of the poor performance and lack of decent software for the same.
    I am now able to say good riddence APPLE! This is NOT the direction I am headed.
    That is all I have to say.

  • External startup disks will not start with my new iMac

    My external devices which are startup disks will not start when connected to my iMac, although it appears in the bootable drive selections after the chime sound, using the option (Alt) key. I get the bootable drive selections and when selecting it all I get is a gray screen with the apple logo and that is it. No matter how long I wait the start up does not happen. I am sure that the external device is not damaged because there is no problem to use it as a startup device when connected to my MacBook Pro.
    Otherwise the devices work as they should. If I connect them to my iMac then they will appear on the desktop, etc. The only thing which does not work is that they cannot be used as startup disks, even though they work fine as startup disks if connected to my MacBook Pro.

    Based on your description it is very hard to tell what is going on.
    You appear to have an i7 iMac. That model was delivered with Snow Leopard (10.6.x).
    My guess is that your external disks may have a version of OS X that predates the version supplied with your new iMac. You cannot run an earlier version of OS X than what was delivered with your Mac.

  • Problems with Itunes New Version?

    Problems with Itunes New Version?
    Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
    <edited by host>
    Thanks,
    <edited by host>
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 1
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0
    Fault bucket 1279649891, type 5
    Event Name: AppHangB1
    Response: Not available
    Cab Id: 0
    Problem signature:
    P1: iTunes.exe
    P2: 9.2.1.5
    P3: 4c47745b
    P4: e36b
    P5: 2048
    P6:
    P7:
    P8:
    P9:
    P10:
    Analysis symbol:
    Rechecking for solution: 0
    Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
    Report Status: 0

    There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.

  • I have an iPhone 4 which is synced with a non apple laptop and wish to sync it with my new iMac.  I have backed the phone up with the laptop and am not sure how to sync it with the iMac without loosing any contacts, emails or photos from my phone.

    I have an iphone 4 which is currently synced with a non apple laptop and I wish to sync it with my new imac.  I have just backed the phone up on my laptop but am not sure what I need to do now.  I do not want to loose any contacts, emails or photos from my phone when I change sync computers.  Can anyone assist with a step by step guide as to how to achieve this oucome?  Thanks in advance.

    Have you read this?
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    The Apple web site has lots of other guidance, for example if you are migrating from Windows to Mac, read this.
    Switch 101: Migrate your Windows files or system to your Mac
    http://support.apple.com/kb/HT2518

  • Problems with the new Pages.

    Hi everyone.
    I wonder if i am the only one experiencing a little problem with the new Pages?
    My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
    Anyone else tried this?
    Martin.

    VladRO wrote:
    These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
    Instead of starting a new list, go to
    https://discussions.apple.com/thread/5468056?tstart=0

  • Problems with the new iPad and Joikuspot premium after iOS 6

    Hi,
    I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
    Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
    I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
    Finally the problem is 100% due to the iPad and the new iOS.
    disappointing, amateur for such a device... (iPad I mean).
    Any help?
    Many many thanks
    Vittorio

    Ho lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
    vorrei ritornare a IOS 5

  • Problem with the new server UCS C220 for set IP to CIMC

    Hi
    We’ve a problem with the new server UCS C220.
    We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
    When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
    Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
    Note. The dedicated management NIC does not link, the other two ports do make link.
    What do you suggest to put an IP to CIMC and start installing our applications?
    regards

    You may have noticed that there is no DVD rom on the c220. What you need to do is:
    Login into the CIMC from your browser
    Luanch the KVM
    Insert the VMware DVD in your machines drive
    On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
    After the VMware OS installs press F2 to enter IP.
    Browse to the VMware ip to download the Vsphere client
    Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
    You can now upload OVA templates or manually create virtua machine from this enviroment.
    Hope this help

Maybe you are looking for