Problems with my new MSI GT780
Hello MSI-forum.
I've just recieved my new laptop GT780.
After I restarted it, I went to eat, when I came back my computer were shut down and when I opened it, it said.
Windows has encountrered a problem communicating with a device connected to your computer.
This error can be caused by unplugging a removable storage device such as an external USB drive while the device is in use, or by faulty hardware such as a hard drive or CDD-ROM drive that is failing. Make sure any removable storage is proeperly connected and then restart your computer.
File: /Boot/BCD
Status: 0xc00000e9
Info: An unexpected I/O error has occurred
Now I cant start my computer and dont know what to do? And I only had it for 1-2 hours before this happend. I'm kinda pissed, that I have to spend more money and waiste more time to get this laptop to work.
Quote from: Svet on 19-January-12, 22:07:15
do you have any USB things attached to it?
No thats why i find it strange
Similar Messages
-
MOVED: [Athlon64] AGP problem with my new MSI K8N NEO4-F
This topic has been moved to AMD64 nVidia Based board.
[Athlon64] AGP problem with my new MSI K8N NEO4-FYes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
I will invest in a graphic card as well, thanks for putting me on track
(The manual sais something about the port supporting 8x agp though? ) -
Problems with my new MSI N580GTX-M2D15D5/OC Please help
Hi, purchased the above card from kuala lumpur, Malaysia on the 19th February 2011 when I visited Malaysia. Installed the card on my Core i7 950 rig.
My card is MSI N580GTX-M2D15D5/OC 3DMark 11 edition.
Had issues installing the card, blue screened many times. I was using a GTX295 with a 8800GT to handle physx earlier with no problems what so ever.
So I removed my 8800GT and checked only with the new GTX580, the card runs as an OC edition, but now the problem is I experience random freezing when I run 3D Mark 11 (It says " windows focus was lost" during bench mark running) and Crysis.
Even Mafia II bench marks gives me a rather low rating as "D", where I was getting a comfortable "C" with my earlier 295 arrangement. Crysis crashed many times too.
Posted here is a screen shot of my GPU Z and afterburner shows a 1000 mv. And I am using 266.58 drivers.
My Rig specs are, if it helps:
1.ASUS Rampage III Formula LGA 1366 Intel X58 SATA 6Gb/s USB 3.0 ATX Intel Motherboard
2. Intel Core i7-950 Bloomfield 3.06GHz 4 x 256KB L2 Cache 8MB L3 Cache LGA 1366 130W Quad-Core Processor
3. CORSAIR DOMINATOR 6GB (3 x 2GB) 240-Pin DDR3 SDRAM DDR3 1600 (PC3 12800) Triple Channel Kit Desktop Memory
4.Intel X25-M Mainstream SSDSA2MH080G2R5 2.5" 80GB SATA II MLC Internal Solid State Drive (SSD).
5. Western Digital Caviar Black WD1001FALS 1TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive
6. Seagate Barracuda 7200.11 ST31500341AS 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5" Internal Hard Drive
7. MSI N580GTX-M2D15D5/OC Graphic Card
8. Corsair CMPSU-750TX 750-Watt TX Series 80 Plus Certified Power Supply
9. Creative GigaWorks S750 700 Watts 7.1 Speaker
10.Creative Sound Blaster X-Fi Titanium Fatal1ty Professional 70SB088600002 7.1 Channels 24-bit 96KHz PCI Express x1 Interface Sound Card
11. ViewSonic 22" VX2255wmb widescreen LCD monitor
12. Windows 7 Ultimate 64bit
If I am to RMA the card it's going to complicate matters as I am living out of Malaysia.. can there be a VGA bios upgrade solution? I am kind of sad that I had to purchase this card..Please adviceQuote
Hi Swet, did all the testing in between my work, sorry I got late to reply. Smiley
It's like this. Managed to get 3D Mark 11 working back again after so many tries. I just disabled the screen saver, and it was okay after that. Strange isn't it?
with 1025mV I got a reading of P6350 and with 1038 I got P6365.
we can assume this as 3D Mark 11 issue
Quote
D mark vantage running was okay. Completed Furmark bench successfully many times. No issues there. http://www.ozone3d.net/benchmarks/furmark_score_190.php?id=147818
Looks like to be Kombuster issue.. since Furmark can work fine. Kombuster is based on Furmark.
If you apply reference clocks from AB does the issue described persist with Kombuster ?
Quote
Link received and will be checked, and also removed.[Not for public]
I didn't go ahead with it without consulting you. Please be kind to check it out for me.
Also I could play CRYSIS 2 Demo without any issue with 1025mV and 1038mV both.
Temps were around 70-75 C. Is it okay.
My personal preference is 1038mV.
Well, what do you think? Thanks very much. Smiley
Quote
Link received and will be checked, and also removed.[Not for public]
I didn't go ahead with it without consulting you. Please be kind to check it out for me.
I've check it and it's the same version as your current installed.
E.g. flashing to this one will not change anything
Quote
Also I could play CRYSIS 2 Demo without any issue with 1025mV and 1038mV both.
Temps were around 70-75 C. Is it okay.
My personal preference is 1038mV.
Well, what do you think? Thanks very much.
Check PM -
[Athlon64] AGP problem with my new MSI K8N NEO4-F
Hey!
Just bought a MSI K8N NEO4-F and got a serious problem with the AGP port, the graphics card wont work!
When I install my radeon 9700 pro I can't get a picture, everything else works including a pci graphics card.
I don't have a diskette drive so I haven't upgraded the bios yet, but I find it hard to belive that you have to upgrade to get a picture.Yes I managed exactly that. I've been out of the computer building business for a while so I didn't know the graphics ports had changed.
I will invest in a graphic card as well, thanks for putting me on track
(The manual sais something about the port supporting 8x agp though? ) -
Problems with Itunes New Version?
Problems with Itunes New Version?
Here is a copy of the error message. Every Time I listen to a song and it end and I go to listen to a new song the Itunes Freeze up. This is on the New Version of Itunes. I have a Windows 7 32bit 3GB Ram 1TB harddrrive Space
<edited by host>
Thanks,
<edited by host>
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 1
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0
Fault bucket 1279649891, type 5
Event Name: AppHangB1
Response: Not available
Cab Id: 0
Problem signature:
P1: iTunes.exe
P2: 9.2.1.5
P3: 4c47745b
P4: e36b
P5: 2048
P6:
P7:
P8:
P9:
P10:
Analysis symbol:
Rechecking for solution: 0
Report Id: 46dfdb3e-99a7-11df-8064-00038a000015
Report Status: 0There certainly is a problem with itunes. I downloaded 9.2 and now it won't open. It won't recognize my iphone, either. I uninstalled it in the order recommended by the site, no joy. Deleted a configuration file, no joy. System Restore, no joy. All other software and hardware on the machine is working fine. I call AppleCare AND a local store, either they are completely clueless (which I doubt), or they have no idea how to fix it. I can't even back up my phone, or use the ipod. And since no one at Apple seems to care enough, I'll have to wait until the clamor is loud enough for them to even admit to a problem before I can use the ipod again.
-
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
I just upgraded my iMac to Lion, and a few seconds ago, I upgraded the iWork package and now I'm having some problems with the new version of Pages (4.1) When I try to change something in a document, a message says "the program is not responding", so I have to force it to close. By the way, the SAVE botton stays the same even I change erverything in my document. Please, a have a work to finish, **** me. What I can do abou it?
-
Problems with the new Pages.
Hi everyone.
I wonder if i am the only one experiencing a little problem with the new Pages?
My problem is that every other time i want to correct the font lets say trying to underline or make the font fatter using the hotkeys "Command+B" or "Command+U" or "Command+I", or even changing it manually in "formats" my font gets stuck, and i have to copy-paste text from another pages-file into my old one to get et back to normal.
Anyone else tried this?
Martin.VladRO wrote:
These are the problems that I am encountering for the moment! If there will come up some new once, I will write them here!
Instead of starting a new list, go to
https://discussions.apple.com/thread/5468056?tstart=0 -
Problems with the new iPad and Joikuspot premium after iOS 6
Hi,
I'm experiencing serious problems with my new iPad after last iOS update. Usually I was connecting to the internet through Joikuspot premium on Nokia mobile phone (E6). I was able to do everything, https sites surfing, absolutely everything with no exceptions.
Now, after iOS 6 update, I can't connect to https sites, google+, sync calendar etc.
I've tried to change connection criteria on joikuspot but nothing. The fact is also that other devices as laptop or other smartphones are still working perfectly, in any case, sharing the wi-fi connection created by joikuspot.
Finally the problem is 100% due to the iPad and the new iOS.
disappointing, amateur for such a device... (iPad I mean).
Any help?
Many many thanks
VittorioHo lo stesso problema, dopo l'aggiornamento a IOS 6 l'ipad non riconosce più il mio nokia N8. Con IOS 5 andava una cannonata...
vorrei ritornare a IOS 5 -
Problem with the new server UCS C220 for set IP to CIMC
Hi
We’ve a problem with the new server UCS C220.
We bought two servers UCS C220 M3 for CallManager 8.6 with High Availability.
When we turn on the server during the boot and when it tells us, oppress F8 to enter at the CIMC and set the IP. But it never enters at the CIMC.
Then, we configure our DHCP server and our switch, we connect the three gigabyte ports to our switch to give him an IP to the CIMC, so and then can enter via browser, but neither works.
Note. The dedicated management NIC does not link, the other two ports do make link.
What do you suggest to put an IP to CIMC and start installing our applications?
regardsYou may have noticed that there is no DVD rom on the c220. What you need to do is:
Login into the CIMC from your browser
Luanch the KVM
Insert the VMware DVD in your machines drive
On the KVM pop up there should be a tab to mount the drive, after mounting it click on Macros and choose ctrl_alt+delete to restart.
After the VMware OS installs press F2 to enter IP.
Browse to the VMware ip to download the Vsphere client
Open the Vsphere client, enter the ip of the vmware and the username will be root and no password if you did not set one.
You can now upload OVA templates or manually create virtua machine from this enviroment.
Hope this help -
I am having email problems with the new Mountain Lion. stmp, imap, etc. I have looked up google info and It is confusing when it comes to TS, SSL also, please explain how to set it up so my email goes out and comes in securely. Help
Incoming Mail (IMAP) Server - requires SSL:
imap.gmail.com
Use SSL: Yes
Port: 993
Outgoing Mail (SMTP) Server - requires TLS:
smtp.gmail.com (use authentication)
Use Authentication: Yes
Use STARTTLS: Yes (some clients call this SSL)
Port: 465 or 587
Account Name:
your full email address (including @gmail.com) Google Apps users, please enter username@your_domain.com
Email Address:
your full Gmail email address ([email protected]) Google Apps users, please enter username@your_domain.com
Password:
your Gmail password
The Quick Answer
Follow the instructions below to set up IMAP1 access in most email clients.
Google Apps users, please follow the default instructions unless otherwise noted, replacing 'your_domain.com' with your actual domain2 name.
this is all greek to me. WHAT IS STARTTLS? On the first page of Apple set up there is a TLS certificate and it is marked NONE- should I change it to the long APPLE CERT option? The next page under ADVANCED: THERE IS A BOX SSL MARKED. Then IMAP Path Prefix - I put stmp.gmail.com.. is that right? Port 993 can use this one? as 456 doesn't work and 587 said it wasn't safe. Under AUTHENTICATION I used PASSWORD. Should I have used external client cert TLS?
Please help me set this up securely. ThanksApple - Support - Mail Setup Assistant
-
Having big problems with my new Mac Pro, when I launch Photoshop CC, I get an error message, can carry on but after a few tasks it starts going gar... menus go blank, when you try to save it shows a blank box.... can anybody help?
when I launch Photoshop CC, I get an error message
and what exactly is the text of that error message? -
Since the most recent Firefox update 3.6.8 my banking institution no longer shows as having a secure encrypted connection, however, my bank assures me all is well with their certificates and that is a problem with the new Firefox browser update, can you give me some idea why it is doing this?
== This happened ==
Every time Firefox opened
== Right after the new Firefox updateHello Anne.
Can you please try it in a new (temporary) Firefox profile and see if the issue is still present? See [http://support.mozilla.com/en-US/kb/Managing+profiles this article] to know how to create a new Firefox profile. Please report back the results. -
Is Anyone Having Problems with the newer version of Firefox?
I still have my older Mac OsXv10.4 Tiger software. I wasn't exactly happy with Safari browser as it would block many sites and were considered incompatible so I downloaded the free Firefox browser (the 2.0 version) of which I STILL have. I'm aware that there is a much newer version and would like to download that, but I've heard a lot of people saying they have been having severe problems with it, but then they have PCs and not Macs.
So my question is for you Mac users that use Firefox, have you had major problems with the newer version? I'm real hesitant to download if I'm going to have the same problem PC users are having...like constantly crashing. Also would my old Tiger software be compatible? I don't want to upgrade to Leopard.Yes. I had problems with Firefox 3.5. The primary problem was very slow or never-ending loading of certain websites (particularly secure sites and sites with many features). I also have had similar, but not as bad, problems with Safari 4. I never had these problems with Safari 2 or Firefox 2. It just seems that with each update, the problems increased for me. I have read the Safari and Firefox forums and tried many fixes with little improvement. I have come to the conclusion that there is some kind of compatibility problem between the latest versions of Safari and Firefox and Shockwave Flash and/or Javascript and OS 10.4, particularly on PPC Macs. I expect there are many who will disagree and I cannot argue or prove the point. This is just my opinion. And I recognize that my problems could be caused by my setup and not by the browsers. By the way, I do not use any add-ons with any of my browsers. Anyway, I got tired of dealing with it and installed the latest version of Camino about 2 weeks ago. I also did a clean install of Firefox 3.0.13. Camino is working out great for me. It is simple and it works. No problems at all. So currently I am using Camino as my primary browser and Firefox 3.0.13 as my backup. I hope this helps.
-
Problem with this new version is when i open firefox something change my home page to mozila defalut page and in the new tab open mozila firefox first run page.Sorry for my bad English
Sounds like this issue:
* http://kb.mozillazine.org/Preferences_not_saved
* [[Preferences are not saved]] -
I am having trouble with the music from my bluetooth "skipping" on my IPhone 5. I thought that this was an antiquated problem with the new technology. It's very frustrating to purchase all of this music and expect great sound and playability and get "skipping". Any ideas on how to resolve this issue?
Does the issue occur when listening to the media using the speaker or wired headphones? If it does, the issue is with the media itself.
If it does not, it's likely a bad connection or interference.
Maybe you are looking for
-
Rolling the date on in a specific format
Hello, I want to output the date in the following format yyyymmdd I then want to add a certain number of days to the above date Can anyone advise the best way to do this Cheers Mitch
-
How to reduce the number of Remote Gateway connections from one server
Hi , We have an XI 3.0 prod system which is being flooded every month end by the invoices generated in our ERP system and occupying all the gateway connections, what I see is that all the remote gateway connections are being established by our ERP se
-
I pad not starting and showing linings..
My i pad is not starting and showing linings of different colours when sleep/ wake button is pressed, then screen goes off . Again pressing sleep button is showing linings again. Holding home button with sleep button is also not solving the problem.
-
JPG export text as outlines?
hi guys, I try to export an Illustrator file as JPG and CMYK and it will always results as and outline text without fill. original file http://www.pixentral.com/show.php?picture=1EQLksieEsVQdt7A2dJGcvWGJYuTo0 exported file http://www.pixentral.com/sh
-
Error : Wage Type is not allowed for personnel SG grouping for WT 3
Hi All, When i am trying to create wage type Degree allowance i am getting error like below. WT xxxx is not allowed for personnel SG grouping for WT 3 (from 01.09.2006 to 31.12.9999) Message no. PG 074 Diagnosis In the "Personnel Subgroup G