Problems With my Office Jet 7500A

Im getting error message on printer screen when I select Print Email Address that the printer was unable to connect to the server.  I confirmed that my printer is connected by printing wirelessly but I cannot retrieve my printer email address.'
Help!

Can you access the Internet from the front of the printer (thorough apps)?  If so, that is good.  If not, enable apps and try again.
Now, let's set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address). If you do not know this, enter the current IP address.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter the router IP address for the gateway and the first DNS entry.  Leave the second blank.
- Click 'Apply'
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • Solution Center problem with HP Office Jet J4550 and windows 7 (64bit)

    Hello All,
    I have a problem. I have the Solution Center and a HP Office Jet J4550 and windows 7 (64bit). When ever I open the solution center, the solution center says " HP office jet J4550 series disconnected" When I open HP document manager, I can access the printer.  Additionally, when I run the HP Print Diagnostic Utility 4.0, it sees the printer, no issues. I can print test pages. No issues. I downloaded the latest driver from the HP site (OJJ4500_Full_13, 299,359KB) Your insight is appreciated.
    Thank you
    Roy B

    I have a similar problem with the J4580 and my new Windows 7 64-bit laptop.  HP Solution Center says that the printer is disconnected.  Furthermore, it can print some documents (short ones), but it was unable to print a 1-page 5MB pdf file.  The printer truncated the page after printing just the top 10%.   The printer is OK with my wife's Windows 7 32-bit laptop.
    I've seen many other people complain about similar problems in this and other forums.  Apparently the driver for J4500 printers is not compatible with Windows 7 64-bit.  Can HP please provide an updated driver or patch?

  • Printer Problem with HP Office jet 6600

    I have the following message displayed on the printer.
    There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP.
    I have searched through the HP suggestion for repaid but find no match.
    I did change my cartriges for the first time. The magenta supply showes low even though its a new cartrige all the other show full,
    I'm under waranty but have no idea how to move forward
    Any help would be greatly appreciated

    Hi @FrankieP,
    Welcome to the HP Forums!
    I understand that you are getting the error message, "There is a problem with your printer or ink system. Turn the printer off then back on if the problem persist contact HP". With you HP Officejet 6600. I am happy to help with this error!
    I would recommend to look through this guide, 'Problem with Ink System' Error Message Displays on the Computer During Setup.
    If that guide does not resolve your issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Recurring Printing Problem with HP Office Jet Pro L7590 w/Windows XP operating system

    This printer is a real workhorse but frequently, when printing large documents from the internet, the type changes from regular print to total giberish -something similar to a Russian Script. It does this midsteam into the document and there is no error message or any indicatin that something is wrong. It is also hit or miss-sometime I get the entire document in English and sometimes I don't. Unfortunately, I'm wasting a ton of paper and time to redo everything when it occurs.
    Other than the above, it works fine. Any suggestions on how to correct?

    So the printer will begin to print garbled text in the middle of large document print jobs, from time to time?  Is this correct?
    How is the L7590 connected to the WinXP PC? (USB, ethernet, wireless)
    How long is the USB cable if connected this way?
    How far away from the router is the printer if connected wirelessly?
    If usb connected, how old is the USB cable?
    It is possible that this problem is coming from a connection problem.  If a minor connection issue exists, then it can leave portions of the print language being sent as commands to the printer out.  This can change the printer's interpretation of the printer command language.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
    I am not an HP employee.

  • Why do I have to turn off and on my HP office jet 7500A every time I want to print a page?  I can print one and imediatly try to print a second and it says it cant be found on the network.

    Since going up to Lion I am having problems with my HP Officejet 7500A printer.  It is on the network wirrelessly.  After every page I have to turn the printer off and back on again because my mac cant find the printer on the network.  The windows mechines here can still find it, but not my Mac Pro.  What is going on?
    Obviously I have it set up right because I can print to it.  problem is my mac thinks it goes off line every time I tell it to print another document. 
    Anyone know of a fix?
    Thanks!

    Lion may have replaced files that partially made up your printer drivers. Either way, HP saw fit to make a new set of drivers specifically for 10.7 so you may want to use it simply to avoid any bugs tehy found.
    Get it here:
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-98095-2 &cc=us&dlc=en&lc=en&os=219&product=4083652&sw_lang=
    Hope I helped

  • There is a problem with the Office database - Office 2011

    Good day!
    I recently installed Office 2011 for Mac and i'm getting the following error message: There is a problem with the Office database. Excel comes up with the error message but i am able to get past the error and open the application, but it freezes when I try on Word. I have to force quit the application to close it completely.
    I've searched online and tried all the suggestions - even those from the discussion board: Problem with Office Mac 2011 database. I've completely removed traces of the software : http://support2.microsoft.com/kb/2398768 and reinstalled using the disc,  as well as followed suggestions to rebuild the database. I also installed the latest Office update: http://www.microsoft.com/en-us/download/details.aspx?id=44026 from Excel (As it was the only one I know of that's functioning after the error message) but to no avail.
    Here are the tech specs:
    OS X
    version 10.9.5
    Office 2011 for Mac
    Version 14.4.4 (140807)
    Update: 14.4.4
    Hope you guys can point me to the right direction. Any suggestions are greatly appreciated.

    Best ask question on one of the Microsoft boards.
    Could try NeoOffice.
    https://www.neooffice.org/neojava/en/index.php

  • Problems with Microsoft Office 2008 and 2011

    Hiya,
    I am running Mountain Lion on my Macbook Pro and I'm having ongoing problems with the Office system. I'm doing a PhD so I use footnotes all the time and in Word 2011, the autosave function makes the footnotes disappear from the bottom of the page, but I'm not comfortbale working wihtout autosave running. I deleted Office 2011 and put Office 2008 back on my machine. However, since I re-installed Office 2008, the whole OSX seems to have slowed down.
    Could Office 2008 cause my whole system to get sluggish? Is there anything that I can do about it?
    I am also wondering if there is there another solution to my original Office 2011 problem with footnotes that doesn;t involve disabling autosave? Has anyone else has similar problems with footnotes? I just wiped my whole system and re-installed all the programmes, so I am surprised to still be having these same problems with Office!
    Thank you for any help and advice! 

    You should try asking your Office for Mac question in the Office for Mac forums where the Office for Mac gurus hang out.http://answers.microsoft.com/en-us/mac?auth=1

  • The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what ca

    The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what can I do?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • How to scan with an office jet 6500a and a Mac OS 10.9.4?

    how to scan with an office jet 6500a and a Mac OS 10.9.4?
    This question was solved.
    View Solution.

    Hi midandco,
    I would suggest deleting the printer from your print system, using this document: Uninstalling the Printer Software.
    Once you have deleted it, I would suggest verifying and repairing the disk permissions: About Disk Utility's Repair Disk Permissions feature.
    I would also suggest running your Apple updates:  OS X: Updating OS X and Mac App Store apps
    After the updates, I would recommend readding the printer with theOS X v10.9 Mavericks: Installing and Using the Printer on a Mac.
    Please let me know.
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • I am having a problem getting my office jet pro 8500 to go online to print. How do i set it to go on

    I am having a problem getting my office jet pro 8500 to go online to print. How do i set it to go online. I have run all of hp's diagnostics and everything passes. it prints the test pages but will not print any other jobs for me.

    This might help - https://discussions.apple.com/docs/DOC-3792

  • I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did).

    I recently upgraded to Lion, and immediately started having consistent problems with Open Office 12 (would hang, and need a Force quit to recover). Has anybody else seen these problems? Any solutions other than going back to Snow Leopard? (I did). But I'd like to use iCloud with iPad.

    Hi Pete. The repair of disk permissions can help resolve  any application crashing or misbehaving.
    As for Lion and the two camps, I think that is a reasonable observation. In my office we have about a dozen Mac's and about one third of those Mac's had problems after updating from 10.6 to 10.7. The main problem for these Mac's was a loss of wifi stability. But for the other two-thirds, Lion was a smooth transition.
    Personally, my Lion experience was fine. But I did get a new i7 MacBook Pro with Lion already installed and only had to migrate my user data from a 10.6.8 TM backup.
    So I think that is a key for Lion's operational success. A clean install of Lion on a new Mac would not cause too many operational issues. But an installation, or more correctly, an update to Lion from SL increased the chances of failure for some users - especially when old software & plugins resided on the Mac. And I would say that they were the people that you saw at the Apple store.
    As for the "latest release of Lion fixed my problems" statement, my experience with these and other forums is that people mostly only go there to complain about the problems they are having. If they are having no problems then they either keep it to themselves or they try to help the users who are experiencing trouble...

  • Simply Print Anything document with my Office Jet 6600

    Why can't I print with my Office jet 6600??
    Everything is connected but it is supposed to be Wireless??
    Please HELP I have been fighting this since I bought this printer!!
    Rene

    Hello rcblv. In order to assist you, I need to determine if the issue is hardware or software related. I want you to make a photocopy and perform a printer status report. I've included a link to the manual of this printer in case you need it. Let me know as soon as possible what the results are. I'm only here to help!
    http://h10032.www1.hp.com/ctg/Manual/c03226612.pdf
    Mario
    I worked on behalf of HP.

  • Snow Leopard Problems with Microsoft Office 2004

    I installed Snow Leopard about two months ago. Ever since I have nad problems opening Microsoft Worrd 2004. Every time I try to open Word it hangs up at "Optimizing font menu performance..." Before I installed Snow Leopard I had no problems with any Office 2004 applications. I also have a lot of problems with fonts when I open Safari.

    This message occurs whenever your installed fonts change. I work for a publisher so was getting it all the time as I turned fonts on and off for different projects.
    In Office 2004, do this:
    1. Go to */Applications/Microsoft Office 2004/Office/Support Files/*
    2. Rename or move FontCacheTool. (Requires administrator access)
    In Office 2011, do this:
    1. Go to *~/Library/Preferences/Microsoft/Office 2011/*
    2. Delete *Office Font Cache*
    3. From Terminal, type touch" then drag in the Office 2011 folder
    4. Back in the Finder, do Get Info on the new, empty *Office Font Cache* file. Make it read only and lock it.
    Notes:
    1. WYSIWYG menus will now just show the font name in standard font.
    2. You may be able to disable the 'optimising' message more easily by going to Word's preferences and turning off the 'WYSIWYG font and style menus' tick box in the General section. This takes affect in all Office applications but doesn't seem as reliable at preventing the caching problem.
    4. Newly added fonts should still appear when you next start an Office application.
    3. However you have Office set up, it can't see certain fonts. They are the ones logged to Console, e.g.:
    12/04/2011 09:58:14 /System/Library/Frameworks/ApplicationServices.framework/Frameworks/ATS.framewo rk/Support/fontd[21782] ATS Font family could not be created for Abaton ITC Std - Legacy Applications may not see this font

  • Problems with Microsoft Office

    I really don't know where to post this as I can't find a Discussion forum for it, please re direct me if this is....
    So I'm having a HUGE problem with Microsoft Office. I've had the Student addition, purchased it in a store, and have been using it since without any issues. Just yesterday, it told me I needed to download an update for it in the System Update. Well it downloaded without a problem, however during the installation it stalled and never completed. When I turned my computer back on, and did the System Update again, it said that my system was completely up to date. However, now the only too things in my Microsoft Office folder is PowerPoint and Excel. The other applications can not be located anywhere on my computer.
    Now is there a way for me to fix this. I no longer have the CD with Microsoft Office on it because I'm constantly traveling. I'm extremely annoyed because I rely on Entourage for my emails, don't really like the Mail application. I just want to know what to do. Any suggestions?
    Thank you.

    When an installer 'stalls' during the installation, I'd guess you'd need to try reinstalling from the CD. I could be wrong though. Here is another forum that may help you if you don't get the answer here...
    http://www.macfixitforums.com/php/postlist.php?Board=OfficeX

  • Problem with Microsoft office since new firefox installation

    I have never had a problem with Microsoft Office --ever. I can have 4+ windows open at once. Since installation the latest version of Firefox many things have changed. The most troublesome is that I cannot open any office programs (word, excel, etc). They try to open and then give me an error message.

    Victorymarketin, welcome to the forum.
    Since they are both Microsoft programs, I suggest contacting MS Customer Service for help.  They have always gotten me up and running in short order.  This is always my solution when I have MS related problems.  They if anyone can, will solve your problem.
    Please click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

Maybe you are looking for