Problems with my pci-mxi-2 card and MAX

I have plugged-in a pci-mxi-2 card in my computer.
After install NI-VISA, NI-VXI, MAX, ..., Windows says that the pci-mxi-2
card
is working but I can't view this card with MAX and I hava an error when I
try
to use resman. With MAX I can only see: "VXI system 0 (Unknown)" in
"Devices
and Interfaces"
Thanks

Hello,
Installing NI-VXI 3.3.1 should be enough. Try to launch Resman just with the VXI-MXI-2 inserted in the chassis without any other VXI modules.
If you continue having errors when running Resman, try to attach a screenshot of the error.
Regards...
crisR

Similar Messages

  • Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click w

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

    Hello, I have a Mac computer with NVIDIA 750M dedicated graphics card and monitor EIZO but the problem was there when I was working with Windows and Acer monitor. When I open a file from Camera Raw in PS this is smaller than the screen so I double-click with the tool "hand" to fit on the screen, but the picture loses sharpness and becomes blurry. If you magnify the image even only slightly with the tool "zoom" the picture comes back clear. In Camera Raw instead is always sharp. I solve the problem by turning off the graphics card in PS but often use plugin that need the graphics card otherwise the processing time is much longer. I ask for help.
    Thanks.

  • Problem of Initialization of MXI-3 card

    Hello,
    I try to initialize my PXI-1002 chassis, with a PCI-MXI-3 in my computer. But it doesn't work.
    My configuration :
    -PXI-1002 Chassis
    -NI PXI MXI-3 8330 and NI PCI MXI-3 8330
    -Win 2000 Pro
    -Dell GX260
    -MXI-3 Soft ver 1.1 (I also tried with the ver 1.15)
    -PXI Chassis Initialization 1.0
    -NI MAX 3.01
    My procedure of installation :
    -1 Installation of NI MAX
    -2 Installation of MXI-3 Soft ver 1.1 (and reset of computer)
    -3 Installation of NI PCI MXI-3 8330 linked to NI PXI MXI-3 8330 in the PXI-1002 Chassis
    -4 Turn on PXI Chassis
    -5 Turn on Computer
    -6 Dialog Box :" A MXI 3 was not detected in your system. Please verify power and link status..."
    The LED (Power and Link) of PXI and PCI 8330 MXI 3 are good (green state).
    MAX don't "see" any PXI chassis.
    My computer don't "see" the PCI 8330 MXI 3 card. That's why I can't communicate with the chassis.
    If you have any idea...
    PS : I don't have another chassis or card to test my current hardware.

    Hello Breizh,
    Apparently you did the installation correcty.
    One question, wich resources do you have in your PXI chassis (DAQ board,...).
    Is your version of Windows 2000 OS is out of date, if not, please update your system. I will recommend service pack 4.
    Most of the time PCI-PCI brige problems are due to BIOS system.
    Could you check on the DELL website if your BIOS is up to date. If not download the latest version of the BIOS.
    Please let me know if theses recommandations helps you solve your problem or not.
    Regards
    Salissou ISSA
    Applications Engineer
    NI France

  • Digital Handshaking with two PCI-DIO-32HS Cards

    Hardware: two PCI-DIO-32HS Cards
    Software: LabVIEW 5.1, NI DAQ 6.6
    Problem:
    I'd like to do burst digital handshaking with two PCI-DIO-32HS cards.
    One being used for sending bit stream while the other receive.
    Suppose I want to use burst handshake mode.
    How should I wire the connections?
    Where should I wire the REQ, and ACK line from the sending card?
    Should I wire REQ from card one to REQ of the other card?
    Also, how do I configure labVIEW VI to do burst handshaking mode.
    Can anyone send me a VI that can do this.
    Thanks a lot.

    Matt,
    I would recomend using the DIdoubleBufPatternGen.C examples that ships with NI-DAQ. You can find it in your \NI-DAQ\Examples\VisualC\Di folder. If you don't have this example on your machine, you can get it by running NI-DAQ Setup and selecting support for C/C++.
    This example does double buffering to allow you to continuously acquire data from your card. Data is transfered only when a full 1/2 buffer is ready. You can set how long to acquire data by setting the number of half buffers to read, or by modifying the read loop conditional parameters to fit you needs. See the NI-DAQ help on how to set you REQ pulse rate to 100kS/s.
    Nick W.
    www.ni.com/ask

  • I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB)

    I have a problem with Imac mid 2010 graphics card (ATI Radeon 5670 512MB). When I play video formats like xvid, mkv, avi iMac freezes and emits horrible sound,in service said the problem is not overheating. Not a problem with memory or hard disk because I placed second correct parts.The same problem is with OSX 10.6.8 and 10.8.4 and other players.Apple hardware test found no problem and tech tool pro found no fault.
    After five days of testing in the service they can not  found fault and it was decided to change the graphics card.
    New graphics have been tested for two days but it is not reproduced divx ... but their test software which did not find any fault on the old graphics...
    Do I have the right to complain if repair does not fix the problem because I use non apple softwere and video formats.

    You could look at the System Profile for the info it presents for the card.  But why wouldn't you think it's not up to date if you have the latest install (according to your sig above)?
    What program are you trying to run?  Is there anything in the system log? 
    I think it's the program that's having the problem and not anything with your video software.

  • Have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.    The Apple icon, usually at top left corner, appears in to

    have a problem with my MacBook Pro.5,3 and monitor.  Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
    The Apple icon, usually at top left corner, appears in top right corner  in a strip including all that left hand.  When the computer is restarted, the screen goes back to normal.  But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
    It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode.   My large flat screen is relatively new.
    The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
    Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

    That sounds like a Hardware problem.
    You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

  • Use PCI-e video card and onboard video at same time

    This is going to be really annoying if i cant use both at the same time. I am trying to get 3 monitors running and want to use the onboard display port or vga port alongside my PCI-E video card and it seems in the bios that only one can work at a time. I am assuming this means i have to use a PCI card with my PCI-e one to get more than the 2 i have at a time.
    Has anyone gotten onboard working alongside a PCI or PCI-E card? Seems like a silly thing to not enable in the Board as businesses have a need for more than 2 sometimes.
    Any assistance would be great.

    lead_org wrote:
    this is only possible with selected versions of the Thinkcentre equipped with AMD processors using SurroundView.
    Intel equipped motherboard does not allow this.
    Actually, a number of later Intel based systems allow for concurrent internal and PCI card-based graphics:
    ThinkCentre M71e, M81, M82, M83/p (Small Form Factor) SFF/Tower, M91, M91p SFF/Tower, M92/p,M93/p SFF/Tower
    ThinkCentre Edge 71, Edge 72, Edge 91, Edge 92
    ThinkStation E30/E31/E32
    http://support.lenovo.com/en_NL/downloads/detail.page?DocID=HT062228
    I myself use a M91p with 3 monitors on a AMD HD 6670 plus a 4th on the DP motherboard (Intel HD2000) port.  

  • If i buy iphone 5 from the usa can i take it back and use it with my UK O2 sim card and how much will a 16gb iphone 5 cost

    Hi,
    if i buy iphone 5 from the usa can i take it back and use it with my UK O2 sim card and also how much will a 16gb iphone 5 cost in the usa?
    thanks
    Andy

    hi there,
    you could buy it somewhere in Europe. I know Apple sells them unlocked here in Germany and if I am not mistaken also (among others) in France and Italy.
    Yet, as Peter wrote, the warranty can become a problem. Not sure whether a one country only rule goes for the European Community as well though.
    As for the price, the 16 GB model costs 679,- € (equals roughly 550 £). Currently there is an average delivery time of 4 to 5 weeks.
    LTE connections will not work with Orange or Vodafone. Only EE is about to offer a compatible LTE network. DC-HSPA and regular HSPA+ will work fine.
    regards, Chris

  • Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Hey Guys i have a problem with my mac since last month and it wont boot up it freezes in a grey apple logo and and spinning gear any body know how to fix this?

    Take each of these steps that you haven't already tried. Stop when the problem is resolved.
    Step 1
    The first step in dealing with a boot failure is to secure your data. If you want to preserve the contents of the startup drive, and you don't already have at least one current backup, you must try to back up now, before you do anything else. It may or may not be possible. If you don't care about the data that has changed since your last backup, you can skip this step.
    There are several ways to back up a Mac that is unable to boot. You need an external hard drive to hold the backup data.
    a. Boot into Recovery by holding down the key combination command-R at the startup chime, or from a local Time Machine backup volume (option key at startup.) Release the keys when you see a gray screen with a spinning dial. When the OS X Utilities screen appears, launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    b. If you have access to a working Mac, and both it and the non-working Mac have FireWire or Thunderbolt ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire or Thunderbolt cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive. This technique won't work with USB, Ethernet, Wi-Fi, or Bluetooth.
    How to use and troubleshoot FireWire target disk mode
    c. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.
    Step 2
    Press and hold the power button until the power shuts off. Disconnect all wired peripherals except those needed to boot, and remove all aftermarket expansion cards. Use a different keyboard and/or mouse, if those devices are wired. If you can boot now, one of the devices you disconnected, or a combination of them, is causing the problem. Finding out which one is a process of elimination.
    Before reconnecting an external storage device, make sure that your internal boot volume is selected in the Startup Disk pane of System Preferences.
    Step 3
    Boot in safe mode.* The instructions provided by Apple are as follows:
    Shut down your computer, wait 30 seconds, and then hold down the shift key while pressing the power button.
    When you see the gray Apple logo, release the shift key.
    If you are prompted to log in, type your password, and then hold down the shift key again as you click Log in.
    Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
    The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
    *Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t boot in safe mode. Post for further instructions.
    When you boot in safe mode, it's normal to see a dark gray progress bar on a light gray background. If the progress bar gets stuck for more than a few minutes, or if the system shuts down automatically while the progress bar is displayed, your boot volume is damaged and the drive is probably malfunctioning. In that case, go to step 5.
    If you can boot and log in now, empty the Trash, and then open the Finder Info window on your boot volume ("Macintosh HD," unless you gave it a different name.) Check that you have at least 9 GB of available space, as shown in the window. If you don't, copy as many files as necessary to another volume (not another folder on the same volume) and delete the originals. Deletion isn't complete until you empty the Trash again. Do this until the available space is more than 9 GB. Then reboot as usual (i.e., not in safe mode.)
    If the boot process hangs again, the problem is likely caused by a third-party system modification that you installed. Post for further instructions.
    Step 4
    Sometimes a boot failure can be resolved by resetting the NVRAM.
    Step 5
    Launch Disk Utility in Recovery mode (see above for instructions.) Select your startup volume, then run Repair Disk. If any problems are found, repeat until clear. If Disk Utility reports that the volume can't be repaired, the drive has malfunctioned and should be replaced. You might choose to tolerate one such malfunction in the life of the drive. In that case, erase the volume and restore from a backup. If the same thing ever happens again, replace the drive immediately.
    This is one of the rare situations in which you should also run Repair Permissions, ignoring the false warnings it produces. Look for the line "Permissions repaired successfully" at the end of the output. Then reboot as usual.
    Step 6
    Boot into Recovery again. When the OS X Utilities screen appears, follow the prompts to reinstall the OS. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
    Note: You need an always-on Ethernet or Wi-Fi connection to the Internet to use Recovery. It won’t work with USB or PPPoE modems, or with proxy servers, or with networks that require a certificate for authentication.
    Step 7
    Repeat step 6, but this time erase the boot volume in Disk Utility before installing. The system should automatically reboot into the Setup Assistant. Follow the prompts to transfer your data from a backup.
    Step 8
    If you get this far, you're probably dealing with a hardware fault. Make a "Genius" appointment at an Apple Store to have the machine tested.

  • Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

    Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
    My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
    Please help!!!
    Thanks,
    Paolo

    Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
    Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
    Personally I think of all the issues possible its DVDSP vs QT.
    Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

  • TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

    No problem, glad to help!
    Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

  • Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

    Hi
    I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
    The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
    This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
    What can I do?
    thank you a lot.

    There is no product called Adobe Acrobat Reader Pro. There is
    - Adobe Acrobat Pro ($$)
    - Adobe Reader (free)
    Which do you have? And are you a programmer?

  • I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

    I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
    lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
    Solved!
    Go to Solution.
    Attachments:
    Pt net.zip ‏2183 KB

    This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
    Attachments:
    PID create by me.vi ‏312 KB
    tut_3782.pdf ‏75 KB

  • With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message  even when im using the phone, has  this probleme with the iOs 6.0.1 and also with the iOs 6.1

    This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

  • I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

    I  have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7  PC. For several years,
    I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation.  All other synchronisation areas (eg Contacts, Notes etc) work fine.
    I have looked for help through the Apple Support Community and tried many things.  I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
    What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from  my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether.  I need to have a properly synchronising calendar on my phone.  Do you have any suggestions?

    In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery.   (from memory, so exact wording may be off)
     The lower the numbers you use there, the longer the battery *should* last.    These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
    --- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

Maybe you are looking for