Problems with my second webpage created with iWeb....

Hi,
First of all, I'm new to Mac and iWeb.
I have created two webpages (very early stage) with iWeb and published both of them, just to test if it would work. The first webpage works fine http://web.mac.com/perallin
The second webpage doesn't work fine. Entering the URL will not show the page and I get an error in stead. By reading the iWeb help program, it tells me to enter http://web.mac.com/perallin/iweb/(name of webpage) but nothing happens??? Am I doing something wrong?? PLease help
MacBook 13'3" Mac OS X (10.4.8) Intel Core 2 Duo 2.0 GHz 1024 MB Ram

Hi
Do you create two Web Site ore one Web Site with two pages. You will see it in the navigation bar in iWeb on the left side.
When you create two Web Site, both will have different URL. You can't find it out, when you set a Link in the first Web Site to the other. Than publish it. When you now go to http://web.mac.com/perallin with your browser and move your mouse pointer over the link in your webpage, you see the URL at the lower borde of your browser.
Now you can remove the link in iWeb, if you wish, and publish it again. So you have the two URL to both Web Side. I never publish to .mac, but I think there is an easier way to find the URL, when you log in to your .mac account.
When you create two pages, you have to create a navigation bar to navigate through your webpages or enable the "Include page in navigation menu” checkbox in the inspector windows of iWeb.
I hope that help a little bit

Similar Messages

Would like to re-create the webpages created with iWeb to iCloud and post

Would like to re-create the webpages created with iWeb to iCloud and post to the internet

Unfortunately, iCloud does not support the hosting of webpages. You will need to find a 3rd party web host in order to publish your web sites.
Depending on the version of iWeb you are using you have a couple of publishing options:
iWeb '09 (3.0.4) you can publish to an FTP Server or a local folder. ( With the built in FTP in iWeb you will end up with an address like "www.YourDomain.com/sitename/Home.html )
iWeb '08 you can publish your website to a local folder. Then upload to your host with an FTP application like CyberDuck
I have been using IX Webhosting for several years with little to no problems "usually the problem was something I did" and they have been quick to solve any issue I have come across. The have plans that start at $3.95 a mo (USD) and their customer service is top notch.
http://jeffnitschke.com/IXWebHosting.html
http://jeffnitschke.com/wordpress/2012/06/how-do-i-move-my-mobileme-site-ix-web- hosting-blog/
"I may receive some form of compensation from my recommendation or link."

Problem in lock Sales order create with BAPI BAPI_SALESORDER_CREATEFROMDAT2

Hi All,
i have the z program to create the sales order with reff quotation in SD With BAPI BAPI_SALESORDER_CREATEFROMDAT2.
this program will excute every 30 mins .
Problem: Some times if i excute the program in background it is taking morethan 30mins so second batch excution also gets starting to create the sales order for same quotation then it is creating 2 sales orders at atime with 1 quotation.
here i am getting duplicate sales orders so i want to lock the creation of duplicate sales order.

Some solutions
- Just lock (ENQUEUE) any object at the start of the job(*), if not locked, you can exit or wait in a loop, will be released at end of job (use a _SCOPE '3' so commit work wont release the lock)
-> This will insure the job runs only once at a time
- Lock the quotation before calling the BAPI, will be released by the COMMIT_WORK (from where do you fetch the quotation, if it is a customer Z_table, you can use the lock object that you have surely created ?) (use a _scope '2')
-> This will insure that at most one job will convert a quotation (i suppose you set a "done" flag or status in the quotation record)
Read [SAP Locks |http://help.sap.com/abapdocu_70/en/ABENSAP_LOCK.htm] if you are not familiar with the concept of lock in SAP.
Regards,
Raymond
(*) E_TABLEE for table, E_TRDIR for program, anything not required by another process

Editing a webpage created with Frontpage

Is there any software available that will allow my mac to edit and continue working with a html website that was originally created with Microsoft Frontpage? This is the only part of my ex-windows based past that I haven't been able to fully switch to my Mac!

Give me an example of a software program that will let me open and edit a page previously created with Frontpage. I have attempted with Rapid Weaver. Thanks for your help!!
Greg

My webpage created with php prints code instead of the created webpage

My webpage is created using dynamic field therefore it had to be save as .php.
The problem now is when i want to print the page it prints code instead of the actual page. Is the a solution for this problem?
Here is the site
http://www.pianoandkeyboardshoponline.co.uk/Test/
Any help welcome

I think you're confused by what you're seeing.
When I print > preview your on-line page in Firefox, I see the page content and links -- which may look like code to you, but they're not revealing anything abnormal.   These are just links to other pages.
detailed_page.php?product_id=307-Yamaha-P105-Digital-Piano-in-White
You have these external style sheets but they are designated for screen & projection media only.
<link rel="stylesheet" type="text/css" media="screen, projection" href="style.css" />
<link rel="stylesheet" type="text/css" media="screen, projection" href="jcart/css/jcart.css" />
Your print styles are actually driven by boilerplate.css towards the bottom of the page.
/* ==|== print styles =======================================================
   Print styles.
   Inlined to avoid required HTTP connection: h5bp.com/r
   ========================================================================== */
@media print {
* { background: transparent !important; color: black !important; text-shadow: none !important; filter:none !important; -ms-filter: none !important; } /* Black prints faster: h5bp.com/s */
a, a:visited { text-decoration: underline; }
a[href]:after { content: " (" attr(href) ")"; }
abbr[title]:after { content: " (" attr(title) ")"; }
.ir a:after, a[href^="javascript:"]:after, a[href^="#"]:after { content: ""; } /* Don't show links for images, or javascript/internal links */
pre, blockquote { border: 1px solid #999; page-break-inside: avoid; }
thead { display: table-header-group; } /* h5bp.com/t */
tr, img { page-break-inside: avoid; }
img { max-width: 100% !important; }
@page { margin: 0.5cm; }
p, h2, h3 { orphans: 3; widows: 3; }
h2, h3 { page-break-after: avoid; }
Perhaps that's why what you see in print doesn't match what you see on screen.
If you want a print out of the screen display, do a screengrab with your print screen key. Paste content it into your favorite graphics editor.
Hope this helps,
Nancy O.

Problem running Lex in project created with Forte C++

I am having a problem running Lex in project using Forte C++ 6. I believe I may have an installation problem, but can't figure out where it is.
I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Is there another version of Lex installed by Forte C++ that is different than Lex from Solaris?
Ron

I created the project using Workshop. The make file generated is trying to run the following command: lex -o output/cmdscan.o cmsscan.l
Which causes the following error message lex: illegal option -- o
I checked the man pages and Lex doesn't have a -o option.
Yes, try in google.com
Wishes , a [url http://personallfiles.com/Grant.Scholarship.asp]federal grant and scholarship-in need for me

Problem with ejb-jar.xml created with ejbgen.

Hi! ,
I m using ejbgen for creating interfaces for my bean nut i m facing a problem which is suppose i have beans in different folders and i m using ejbgen for each folder containing beans.Now the problem is i m using ejbgen under one target in build.xml so wht happens is when ejb-jar.xml is generated it contains entry for the last folder beans and overrides other beans entry in different folder . i need some way so tht ejb-jar.xml keeps appending for every ejbgen is called.
Thanks in advance....... :-)
warm regards,
Sourabh Singh

My temporary workaround is copy all beans from different directory trees to one temporary directory, and create one FileSet in Ant.
z.

Every time I open a new Window, it opens with a second tab. With "my" top sites. How can I undo this? I made a screenshot, if necessary.

When I open a new window, it opens 2 tabs. First is the requested url. Second is a tab without an adress. The second tab looks like some kind of touchscreen buttons for smartphones? I guess, it's an Firefox feature.
I tried about:config and changed browser.newtab.url, checked starting window, etc. etc. Nothing helped.
How can I keep my Firefox from opening this tab? Please help!
Greetings from Hamburg, Germany,
Peter H.

'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Press the '''Alt''' or '''F10''' key to bring up the tool bar.
Followed by;
Windows; '''Tools > Options'''
Linux; '''Edit > Preferences'''
Mac; ''application name'' '''> Preferences'''
Then '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites and see if there is still a problem. Then restart.

I have many floopy discs with information that I created with "Adobe Home Publisher" How do I acces

i have used "Adobe Home Publisher" extensively in the past. I some how concluded that this application is no longer and has not been available for many years. I have many floppy disks that re loaded with important history and genealogy information that I would like to access. Is there any means of getting the information off these
floppy disks.
Jack D. Palmer

Read this on how to do that https://discussions.apple.com/docs/DOC-3141

Error with running JAR files created with NetBeans

I have been having difficulty running the JAR files that NetBeans compiles. When I run my code from NetBeans, it always works just fine, but when I try to run the compiled JAR I get the following errors:
Exception in thread "main" java.lang.UnsupportedClassVersionError: Bad version number in .class file
at java.lang.ClassLoader.defineClass2(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:719)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:160)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:254)
at java.net.URLClassLoader.access$100(URLClassLoader.java:56)
at java.net.URLClassLoader$1.run(URLClassLoader.java:195)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:268)
at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
This is happening for multiple projects now, though I don't remember it happening before. What am I doing wrong? Why is this happening? How can I fix it? Thank you for any insights...

Oh, I forgot to mention, all the NetBeans samples work, just not apps that I create. This is very frustrating!

HT5225 what to do with podcasts created with GarageBand

With Apple doing away with hosting my podcasts created with GarageBand, will I be able to submit future podcasts that will appear in iTunes?

GarageBand wil make the actual recording of your podcast, together with chapter markers and images if you want an 'enhanced' audio podcast. It will not make the feed. It's designed to work directly with iWeb, which itself can post to any hosting service; but the file you save out of GarageBand can be used with any podcast creation program or service.
However you need to distinguish between the different types of image. The images that GarageBand adds to the file are visible when you subscribe to the feed in iTunes as they are actually embedded in the media file. The image which appears on the Store page, and the data such as categories, subtitles and so on, is all in the feed and GarageBand does not and never has provided these. If you work with iWeb you can add those details there to produce the feed, or other methods will provide places you can enter the data.
In your own interests, when you have a question please start a new thread rather than tacking on to an old one - this one is months old and indeed the OP's problem is not the same as yours. Questions about GarageBand itself are best asked in the GarageBand forum, and about podcasting in the Producing Podcast forum - you're in the iCloud forum and iCloud has nothing to do with this as it does not offfer website hosting.

What happens to the form I created with free trial when I upgrade?

I signed up for a free AdobeForms account 6 months ago. In that time I created a really detailed form. I am still able to access the account and the form to this day without any problems. However I now want to upgrade my account so I can do more with the form I created with the free account.
What will happen to my existing form when I upgrade my AdobeForms account to paid subscription? I am assuming it would just remain in my account. However when my secretary called to order the full subscription, the sales rep suggested that the existing form created via the trial would be wiped-out upon upgrading the account.
Is this true/accurate? I do not want to lose the form I have already perfected when upgrading.
Thank you for any info!!

Thanks! Ok... well we're going to order the full subscription now, I made a PDF backup of the web form in case, but really looking forward to not losing the designed form.

Trace() not working with embedded SWFs created with Flash Builder

I have just migrated to Flash Builder 4.5 with the 4.5.1 SDK.
I have an application that loads a lot of child SWFs into it - some of which are created with Flash, some are created with Flash Builder.
I am noticing now that my trace() statements that are called from within SWFs produced with Flash Builder that are loading as child SWFs into my main SWF are NOT appearing. However, trace() statements called from within SWFs produced with Flash that are loading as child SWFs into my main SWF ARE appearing.
This is an extremely major problem and has short-circuited my debugging/development.
Any recommendations, workarounds, or suggestions?

If the child SWFs were created by performing an "Export Release Build", then trace() statements would be omitted.
You can control this by setting the -omit-trace-statements compiler argument (in Project properties -> Flex Compiler -> Additional Compiler Arguments).
-Anirudh

High level contract and orders created with reference

Dear All,
The client is an integrated flat steel manufacturer. They have entered into quantity contract with high level products like for example Hot rolled coils + Cold rolled coils + Heat Treated plates 5000 T per month. There is no clear cut quantity breakup of each product. On monthly basis customer releases purchase orders with exact grade and dimensions. The requirement is to capture contact for 5000T and create orders with reference to the contract with necessary completion rule. Since exact break up of the high level products is not known controlling of order quantity to 5000T will involve lot of manual intervention. I was thinking in the contract we have high level material "X with 5000T and orders created with reference with actual materials like Hot rolled coils, Cold rolled coils and exact dimension/grade mentioned. Is this possible to have different materials in contract and order with enhancement?
Any other idea of fulfilling the requirements is welcome.
Thanks,

Hi Ramesh,
Go through EKPO there is a Table BANFN it will update when you create a PO with reference to PR
Do se11 > Table EKPO> CtrlShiftF10 > Assign any of PO no. in the EBELN > Execute > you will find BANFN table
it indicates Purchase Requisition Number. it will update when you create PO with reference to PR.
Regards,
Vraj

Issue Alert created with workflow (Prasanna Adavi posts) - Error project site creation in EPT

Hi,
in PROJECT SERVER 2013, after following the Prasanna Adavi posts on "Setting up an alert for Project Site Issue (and Risk) Alerts using SharePoint
Designer Workflow" i've saved the site template.
If i create a site from the template the site creates correctly and workflow Issue Alert works fine. BUT if i add the new template in an EPT, when i create a new Project i receive error in ProjectSiteUpdate (Failedbutnot blocking) and the site failed
to be created.
This is the error:
General•CreateWssSiteContent: Creating project site failed! Project Uid=6fc7f531-8ad7-e311-9415-005056ab29ed, site URL=https://project.companygroup.org/PWA/20140509-TestIssueAlert10, site name=20140509-TestIssueAlert10. System.Runtime.InteropServices.COMException
(0x8107058A): <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete the operation, please try again in a few minutes. If you see this message repeatedly,
contact your administrator. ---> System.Data.SqlClient.SqlException:
The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_, schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1
wrapClos at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate,
Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String&
bstrWebTemplate, Int32& plWebTemplateId)Microsoft.SharePoint.SPException: Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator.
---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_, schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection, Action`1 wrapClos ---> System.Runtime.InteropServices.COMException: <nativehr>0x8107058a</nativehr><nativestack></nativestack>Microsoft.SharePoint.SPException: We_re sorry, we weren_t able to complete
the operation, please try again in a few minutes. If you see this message repeatedly, contact your administrator. ---> System.Data.SqlClient.SqlException: The EXECUTE permission was denied on the object _proc_AM_PutAppPrincipal_, database _App_Management_db8e4bc2-bb34-4cc7-be57-a3b620a3abc5_,
schema _dbo_. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapClos at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb,
Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb,
Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) --- End of inner exception stack trace --- at Microsoft.SharePoint.SPGlobal.HandleComException(COMException comEx) at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String
bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, Int32 fIgnoreMissingFeatures, String& bstrWebTemplate, Int32& plWebTemplateId) at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate
webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate
webTemplate, Page page, SPFeatureDependencyErrorBehavior featureDependencyErrorBehavior, ICollection`1& featureDependencyErrors) at Microsoft.SharePoint.SPSite.CreateWeb(String strUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate,
Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid webId, Guid rootFolderId, Boolean createSystemCatalogs, Guid appInstanceId, String appWebDomainId) at Microsoft.SharePoint.SPSite.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle,
String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String
strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId) at Microsoft.Office.Project.Server.BusinessLayer.AdminProjectSiteAllocator.CreateSPWeb(ProjectSiteConfigurationInfo configInfo, SPSite topSite):?WSSCreateSiteFailure
(16400). Details: id='16400' name='WSSCreateSiteFailure' uid='cb09143a-8ad7-e311-9415-005056ab29ed' projectUID='6fc7f531-8ad7-e311-9415-005056ab29ed' workspaceUrl='https://project.companygroup.org/PWA/20140509-TestIssueAlert10/20140509-TestIssueAlert10' projectWorkspaceName='20140509-TestIssueAlert10'.
•Queue:?GeneralQueueJobFailed (26000) - CreateWssSite.CreateWssSiteMessage. Details: id='26000' name='GeneralQueueJobFailed' uid='cc09143a-8ad7-e311-9415-005056ab29ed' JobUID='bcc7f531-8ad7-e311-9415-005056ab29ed' ComputerName='4c7454d7-d6c8-42e7-a071-01921e89dbd5'
GroupType='CreateWssSite' MessageType='CreateWssSiteMessage' MessageId='1' Stage='' CorrelationUID='9b3a8f9c-a1f4-e0a1-9dbd-59e8ea307386'. For more details, check the ULS logs on machine 4c7454d7-d6c8-42e7-a071-01921e89dbd5 for entries with JobUID bcc7f531-8ad7-e311-9415-005056ab29ed.
Can someone help me?
Regards
Daniele
Daniele

Thanks Adavi,
i've created the workflow in a placeholder template for test purpose and it works. I confirm you dependence from:
- App Configuration Management Service (hidden in TechNet but you receive error if is not active);
- User Profile Service and Sync Service active;
- Profile Syncronization started;
The error occurs when i create a new project with the site template created with the issue list workflow inside.
I'll wait for your test and tomorrow i'll test it in an other environment to exclude installation dependence.
Daniele

Problems with my second webpage created with iWeb....

Similar Messages

Maybe you are looking for