Problems with my Sound Blaster Audigy Platinum Bracket dr

not to long ago i had to get a new motherboard. ever since installing all my hardware back on this new MB, my midi braket doesnt work any more. for example, i use headphones for gaming and the headphone/mic inputs on the front of the bracket wont output any sound. my remote control works fine with my mediasource software but these inputs on the front just wont work.
any suggestions would be greatly appreciated. 8)

problem sorted now, everything is working fine. 8)

Similar Messages

Installation Problem with my Sound Blaster Audigy Li

I own a Win XP 64 bit Edition and want to install my soundcard.
But there is no driver for my Soundblaster.
Please help, the Model Number is SB000.
Cause i installed linux next to windows i saw, that it is identified as an SB Li've! 5. so i downloaded that 64 bit driver.
The Installer runs throw the process, but there does not appear any WHQL message or anything.
After reboot there is still no SB installed.
Please help me.Message Edited by Good_Will_Hear on 07-27-2006 2:7 PM

Got one right >here, but it's a Beta driver. Meaning, it may or may not work, and it's unsupported. Your sound card is a Li've! 5., which wasn't really designed for x64.
Good luck!
DaleMessage Edited by Dale-CL on 07-27-2006 02:4 PM

Sound Blaster Audigy Platinum creating hard re

Greetings. Looking for insight on what I might do to alleviate a problem I am having with a Sound Blaster Audigy Platinum sound card and dri've.
This is the original Audigy Platinum. I am running windows XP pro with all sevice packs installed.
Installation of this new unit went well. No hardware or software conflicts and the card and audio "dri've" worked on the first attempt. All software also installed properly.
Unfortunately, when playing any audio through the system continuously for over a minute or so, the system begins to have trouble. This trouble is exerienced independent of what software or media type is playing the audio.
First, the sytem will have momentary "hangs" where the audio will be interrupted by a monotone electronic beep lasting from a fraction of a second to a couple of seconds long. The audio will then resume from the point it had left off when the tone began. If I continue to play audio after these tones begin, the system will shortly thereafter go through a hard reset. (By hard reset I mean an immediate return to memory count, bios screen and then startup as if I had pressed the reset button or the power had been interrupted)
The ONLY time this takes place is when I have been playing some sort of continuous audio.
As I said, if anyone has experienced this and has any insight as to the cause or more importantly the remedy to to the problem, I would appreciate the input.
Thanks.
JP

No comments on this?
Just hoping someone will be able to help me so I can use my audio files once again.
JP

Sound Blaster Audigy Platinum EX

Hello, I have a Sound Blaster audigy platinum EX-, me and bought a new PC and have put my targeta SB, but in the installation as soon as this one quite made, when I want to calibrate my 5. puncturing in Mediasource's icon there goes out a mistake that he says: his targeta is not compatible with this controller. I have put him Win XP with SPack 3, as I have seen it is not drivers for this targeta with SPack 3, only it is with SPack 2, which I must do , do I put a SPack 2 Or is it drivers for SPack 3
I m Spanish, a pardon for my English

Hi Specter,
Don't worry, it's better to ask questions and get the answers you need, than to be confused or unsure
The first question is a bit subjecti've, some people may notice the difference, but the quality/SNR on those cards is very high so it shouldn't make much of a difference really. It will sound better aswell as you'll be hearing the full effects, in the proper speakers, instead of just stereo.
As far as the second query goes, I can't really recommend any particular application to you personally, but others can add their input there. The full versions of the various applications should all pretty much have the same options, at least the ones I've tested generally allow you to change the audio option which is what you'll need if you want to connect digitally (most DVD applications now have a built-in decoder, but if you want the audio to be sent over the digital connection you need to turn off the decoding option, so it outputs the signal untouched, to your receiver). Trial versions don't have as many options though, so on some you might not be able to adjust the option you need, but that shouldn't be a problem on full versions.
Hope that helps,
Cat

Sound Blaster Audigy Platinum BIG Proble

I have sound blaster audigy platinum and in few weeks I have got this strange problem that I?ve hadn't before. If I use old drivers for it, windows gives me blue screen with "bad pool caller" very often when I play or just listen music. With new drivers it gives me "driver irql not less or equal". At the same time in linux it works fine. In windows I've checked viruses etc. reinstalled windows many times, used memtest and so on. Finally 2 days ago I took my Sound blaster off my computer and ever since I haven't got any problems. So it obviously is the problem. But I just don't know what to do anymore to get it work? Now I use the sound card that comes integrated with my motherboard but it's not as good. Btw I don't use integrated sound card same time with sound blaster. Please Help!

Hate29,
You might find something useful here.

Sound Blaster Audigy Platinum

Hi there I just had a quick simple question. I am interested in buy one of the Sound Blast Audigy Platinum eX sound cards with the external portion as well. I am wondering if the external can double as a receiver so I can just hook up a set of speakers to the PCI card for my TV and my Personal Computer. Is this possible, even if I do need to purchase extra adapters? I have an RCA cable I can run from the L/R of my TV to the External Card, but can the External card provide an output to the speakers? Basically all I am asking is if the TV sound can go out of the PC speakers...lol Sorry if I made it sound more complicated than it really is.
Sincerely,
Matt

Hi Specter,
Don't worry, it's better to ask questions and get the answers you need, than to be confused or unsure
The first question is a bit subjecti've, some people may notice the difference, but the quality/SNR on those cards is very high so it shouldn't make much of a difference really. It will sound better aswell as you'll be hearing the full effects, in the proper speakers, instead of just stereo.
As far as the second query goes, I can't really recommend any particular application to you personally, but others can add their input there. The full versions of the various applications should all pretty much have the same options, at least the ones I've tested generally allow you to change the audio option which is what you'll need if you want to connect digitally (most DVD applications now have a built-in decoder, but if you want the audio to be sent over the digital connection you need to turn off the decoding option, so it outputs the signal untouched, to your receiver). Trial versions don't have as many options though, so on some you might not be able to adjust the option you need, but that shouldn't be a problem on full versions.
Hope that helps,
Cat

Sound blaster audigy platinum ex constant static sound, PLEASE HE

hey, i just got my sound blaster audigy platinum ex sound card today and the second i installed it and plugged in my speakers i got this static noise that would come out at all times, when i would play music you could hear the music softly, but still the static dominates. I disables my onboard sound and tried reinstalling in a different pci slot but still same problem. This is my first time buying a creative card and it has not been a pleasant experience so far. Can anyone please help me?
My pc is
windows XP pro
amd 3000+ 64
Asus K8V SE deluxe socket 754 via k8t00 ATXASUS

siruis,
go to the mixer settings and one of the sliders. the one
beside the wave slider to the right and slide it down to about 40% and try it, while playing if static still present
slide it down more while the track is playing, i had the same prob wwith li've 24bit 7. and this cured it for me.
hope this helps you.
john ( good luck )

Creative Sound Blaster Audigy Platinum

Im having issues with this card when I bought it it was great but now after reformats and installing from the software disc I frist recieve an error saying it cant find the remote reciever then I recieve an exclamation mark next to the audio media controller in system device manager although my sound still works on desktop (but not using computer based programs like cubase sx 3)....thinking it was may be needing an update I came to the website and it told me to update to all latest driver and patches to which I did..rebooted and still same problem this time added problem being I have no sound at all. So why? has this all of a sudden happend... I am coumputer literate enought to uninstall all older software before installing new software from this website but all to no avail...why is there no audio media controller in all the software thats available to download from here... Ive also tried having the realtek audio 97AC driver installed before installing all creative software and also installing it after installing all media from creative but either way it tells you to?uninstall this driver as it can cause conflicts to which I do and its still no sound ?..it resolves the issue of the exclamation mark next to audio media controller in device manager but theres still no sound...So why dont I get any errors when installing the software from the disc it all goes smooth then gives me the no remote reciever detected (tried new batteries in it)....then again same problem with audio media controller...please help me as this card at the time of buying cost me nearly ?200....

It sounds like the card isn't installing correctly, when it is installed it should be listed in the Device Manager with the correct name (so not a generic audio device or unknown device). It would be best to disable your onboard audio to make sure that won't conflict.
What happens when you run the installation CD? Does it seem to install the driver? It may help to uninstall the card, and move it to another slot if it isn't getting picked up correctly. It'll force it onto other resources, reinstall the CD then.
When the card is installed, check in Control Panel -> Sounds and Audio Devices. The card should be listed there so you can select it as the preferred device (for playback and recording).
Cat

Multiple problems with Creative Sound Blaster Live X-Gamer CT4

First I'd like to point out that I'm lacking the installation CDs, the manual, etc.
My problem is the following: I've downloaded what I think are the appropriate drivers for this sound card from the Creative Labs site. Correct me if I'm wrong or if I actually have to re-download a driver installation package from some other place in particular
Ok, concretely, my problem is that the drivers either are not matching, or there's something wrong with my card (it slows down my system on the startup)
Here are some pics of my current situation:
http://img8.echo.cx/my.php?image=soundproblem6rz.jpg
http://img8.echo.cx/my.php?image=soundproblem27qr.jpg
http://img8.echo.cx/my.php?image=drvguidetlkit04hs.jpg
http://img8.echo.cx/my.php?image=drvguidetlkit025uf.jpg
http://img8.echo.cx/my.php?image=drvguidetlkit030yc.jpg
Please forgive me I'm having some type of problem with uploading images and showing them here directly.
BTW, there's some type of "cord" in the sound card that isn't plugged into anything in my computer. Do I need to connect it somewhere?
Message Edited by TheOrgy on 06-6-2005 05:48 PM

TheOrgy wrote:
First I'd like to point out that I'm lacking the installation CDs, the manual, etc.My problem is the following: I've downloaded what I think are the appropriate drivers for this sound card from the Creative Labs site. Correct me if I'm wrong or if I actually have to re-download a driver installation package from some other place in particular?Ok, concretely, my problem is that the drivers either are not matching, or there's something wrong with my card (it slows down my system on the startup)Here are some pics of my current situation:?http://img8.echo.cx/my.php?image=soundproblem6rz.jpghttp://img8.echo.cx/my.php?image=soundproblem27qr.jpghttp://img8.echo.cx/my.php?image=drvguidetlkit04hs.jpghttp://img8.echo.cx/my.php?image=drvguidetlkit025uf.jpghttp://img8.echo.cx/my.php?image=drvguidetlkit030yc.jpg?Please forgive me I'm having some type of problem with uploading images and showing them here directly. BTW, there's some type of "cord" in the sound card that isn't plugged into anything in my computer. Do I need to connect it somewhere?Message Edited by TheOrgy on 06-6-2005 05:48 PM
Try this. I also have the ISO image for the CD and I can send it to you but it's 540MB and require you to provide me a place to upload to.

Sound Blaster Audigy Platinum Wi

Has anyone had trouble useing the IM TUNER and BEATNIK'S MIXMAN studio remixer under Windows XP pro? both applications will not launch properly. Under window 2k pro. all worked well. Any advice would be greatly appreciated. I've doanloaded and installed all required XP drivers for the Audigy platinum. Thanks

Hate29,
You might find something useful here.

Problems with integrated sound in k8neo4 platinum

i got this problem
the rear speaker out and the center/subwoofer out only sound by one side., the other speaker is not working.
The configuration is correct and i have the last drivers. i dont know what it could be. can you help me to identificate the proplem please.
pd: Sorry for my english
Thank you
[Deleted because it was not in English - Richard]

carvax,
My friend's car is having problems, the car has 4 wheels. What do think is the problem?
I would greatly appreciate any help . . . thanks in advance.
Richard
P.S. If you have trouble helping me with my problem. Think about how much trouble I am having helping you with yours. Especially when I do not have a clue what the specs of your Hardware, OS and Power Supply are.

Problems with Creative Sound Blaster Live 24-

In device manager, the SB Li've shows up as
multimedia device instead of SB Li've, the SB Li've disc starts the
install and then says I need to insert the SB disc (the disc has no
scratches), and when I ran dxdiag.exe, I got the following results.
Thanks for your support. DirectSound test results: Failure at step 3
(DirectSoundCreate): HRESULT = 0x8878000a (The request failed because
DirectSound resources, such as the priority level, were already in use
by another caller.)
I tried uninstalling the card from Windows, removing the card from my system, rebooting, powering off, and reinserting it in a new slot, but that didn't work.

I've had problems in the past with soundcards, ect. Try going to control panel/ system / Hardware tab / Device Manager / Sound, video and game controllers and see if you can remove the hardware (your soundcard) by right clicking and removing it. Reboot the computer and the computer should be trying to detect a new piece hardware while you still have your soundcard in the computer. When the Wizard comes up, install the disk and let the Wizard from Windows do the installation.
You want the cd installation do the install. Then after you have the software installed, you can go into the properties of your hardware and see that the drivers/devices are working properly.

Problems with creative sound blaster aud

i have 2 problems . my system says i have a corrupt file when i try to auto update. i see that no one has been able to find a solution to this. 2. i installed the card and all its software but i get no audio. device manager says that its working properly. any one have any suggestions.

had this problem before. this KB link may helphttp://us.creative.com/support/kb & search for "SID2443"

Help! Sound Blaster Audigy - bass and tre

Hello! I had a Sound Blaster Audigy. There are any problems in the control with the Creative Surround Mixer. It cannot to set the bass and treble. Why and what is problem with it's Thank you!?Problem with the Sound Blaster Audigy - bass and treblehttp://icq299885550.mysinamail.com/Photo/Creative.jpghttp://icq299885550.mysinamail.com/Photo/Creative2.jpg?Message Edited by mrchan2002 on -7-20062:27 AM

What's the model number of your soundcard? Certain series of Sound Blaster doesn't support adjusting bass and treble so you have to use the Graphic Equalizer software instead to adjust it.
Jason

MSI 648 MAX + Sound Blaster Audigy 2 Platinum

Hi.
I have a big problem because my sound blaster audigy 2 platinum doesn't work with this mainboard. When i start any sound blaster program my pc freezes.
What can i do?
Excuse my english
Thank you

Follow this steps
1) Unplug your External Creative Card
2) On computer
3) Go to Bios
4) Set Bios of AC97 to AUTO
5) Reboot
6) If you are using win98, go to the control panel, system, Device manager, click "disable in this hardware profile".
8) Restart computer
9) Off computer
7) Slot your Audigy........everyting should be fine.
If problem stil persist, I can still help you but it is going to be very troublesome.
*Note before you do step 1 remove your AC97 driver first*

Problems with my Sound Blaster Audigy Platinum Bracket dr

Similar Messages

Maybe you are looking for