Problems with my VGA

I have taken the MX440 AGP out and replaced it with an ATI radeon7000 PCI.I have enabled the VGA adapter in the start up menu and installed it with little difficulty. however, when I go to use the television feature the monitor goes blank and the computer restarts. Sometimes it does this without trying to use any of the features. I have downloaded so many drivers that my head is spinning and none of the new drivers do anything to help the problem. Any help would be greatly appreciated.
WIN XP Pro O/S
MSI 865PE Neo2 800FSB bios v1.0
P4 2.4c in scisoft it says that it is a P4N
Corsair XMS Series 2 x 256 PC3200 400mhz DDR llpt Memory sticks
Nvidia GeForce Mx 440 128 MB agp video
maxtor diamondmax 160gig 7200RPM 8MB
4 80MM case fans 3620RPM 45CFM
450w PSU

Update to a newer BIOS I think it was BIOS 1.2 that said something about VGA changes. Well I haven't tried a PCI card on my system, but try setting the Priority Option that is that BIOS. Default is set to AGP/PCI. Set it to PCI/AGP and also check if there is enough air flow. What you say sounds like an overheating problem. Oh I did have a similar problem with my Radeon 9800 Pro when I put alot of stress (playing games and stuff) it wuold crash. Check your RAM, make sure if it has to be in Dual Mode that it is set in dual mode. That fixed 80% of my instability errors. Dual Mode is DIMM 1&3, DIMM 2&4, or DIMM 1,2,3,& 4.
RAILVEN

Similar Messages

Both xp and windows 7 have video problems with my VGA connection using TV

both xp and windows 7 have video problems with my VGA connection using TV as my monitor when it gets to starting up windows no matter what version it will not I have let my mac on all night and still says starting windows or the windows 7 logo and nothing else will happen also when I use a 3rd patty software like peraills or other it works like a charm how to fix it?

To map the drive on your computer click on Start - RUN - type "\\192.168.1.1" and click ok... When prompted for Username and Password type "admin" and click ok... Now you will be able to see the folder which you have shared on your router, right click on it and select "Map network drive" and click on finish.
Now it will map the drive on your computer and you should be able to transfer the file from your computer to the USB drive.

Equium P200-1ED - have problem with installing VGA driver

Hello
I have problem with installing vga video driver, each time in installion it stops on
Version: 6,14.10,4833 and there is error poping up.........
Please help!

Hello
What error message is it exactly?
Make sure that the chipset driver and SP2 is installed at least.
I had a similar issue that I cant install the display driver. The error message was something like the hardware is not supported
But it was very easy to solve this problem. I installed the driver via device manager. I have selected the graphic card and choose update driver. Then I did choose the advanced installation to choose the directory by myself.
Anyway, after restart the driver was installed and it worked. :)
Greets

[VIA] PROBLEM WITH SIS VGA

I have a problem one sis VGA 32mb agp(s-305) she does not work with ms-6712 mbo it wont even start with the card in the slot?
What is the problem could it be voltage? i upgraded to newest bios so that bios can't be the problem.
Help if you can!!!

Quote from: Wonkanoby on 15-April-05, 18:40:16
IS IT AT LEAST AN AGPX 4 1.5V CARD
newer boards dont work with old agp x 2 3.3v cards
unfortenatly it is an 3,3v card

There is a Weard Problem with MY VGA CARD

I got Geforce 4 TI 4600 , before Week I installed a New RAM 512 when am home with my PC i Tryed a game To play (for example. Vice City) when the game started The Screen Was Shuting off, On ,off & My display flickers And fade into Black Screen ! I Tryed many thing like (Uninstall the New RAM and Play with the old one , Format My PC & Reinstall WINDOWS , Update the display Drivers , Check that All The Refresh rates are good , I checked the DirectX Test it was all (*No Problem) with Succesful Tests , My only Idea was to go for Any Service shop ... Iv gone for Two Shops they Couldnt Help me i dont know what to do am so sad for it ANY one Can Help me Or Suggest me any Idea ! please Am Using my Spare GeForce 2 GTS for Now ,(that Problem was like an Human Virus it was only when i start a game , but now Even if i started Windows with It )
thats My e-mail ([email protected]) u can add me for msn Messenger
Thank you all , figo

Theres not much to go on, such as your computer, hardware, monitor etc.. I will ask several questions that may give you a hint... What is your video resolution and color depth and refresh rate..Is it beyond you monitor specs?What video drivers are you using? Look in the device manager to see if there are any conflicts, if so that may give a hint..Make sure you BIOS is set for your video card such as the correct AGP settings..Will your MoBo accept your AGP for the video card?My guess it's in the video area and not your system memory..
Thats all I can think of now..Goodluck,
jolphil

I have a problem with my VGA output.

I bought a VGA adaptor, plugged it into my ipad (3rd gen running iOS 6) and used a VGA cable to connect my iPad to a TV with a VGA input. I get no image, no mirroring, no slideshows (using keynote) nothing. I have tried looking around but can only find information relating to iPad 2 and older versions of the operating system. Any tips before I declare my VGA adaptor as a possible faulty buy?
I have tried:
1. Turning off my iPad and then plugging the VGA adaptor into the bottom of the iPad. The iPad automatically turned on but still nothing.
2. Turning off and on.
3. Looking through the settings but there is nothing to see.
4. Messing about with the settings on the TV
5. shouting!
6. it does not seem to matter which apps i use. However, interestingly..... When the VGA adaptor was plugged into the iPad, I used keynotes and pressed the play button, it went into presentation mode like you would expect when using an external monitor but, no picture on the TV.
Thanks

No worries all sorted!
It turns out that it was the AVG adaptor that was faulty. Now I have replaced it the iPad popped up on the monitor right away.

X1 connectivity problem with old VGA beam projector using mini displayport to VGA adaptor.

Hi all,
I would like to ask you how to connect this X1 with VGA projector as well.
actually, X1 has a external interface specification as mini displayport 1.1a.
So I bought mini displayport to VGA adapter from MAC store.
(Actually, Lenovo Korea office doesn’t sell this adapter directly on Korea, even in the future.)
and try to connect both of LED monitor and beam projector.
LED monitor was worked as well. but, this adaptor doesn't work with VGA projector. TT
Please help me how to work this adaptor with projector as well.
Solved!
Go to Solution.

Hi everybody. I was having the same issue here, but I bought a Mac minidisplayport to VGA adapter. It worked on my Monitor but it was not working on my clients VGA beam projectors. But today I figured out a way to make it work, and it is pretty easy; just change your laptop screen resolution.
When you connect the mini Dport to VGA adapter to the projector VGA receiver cable, just change your laptop screen resolution to 1024x768 (maximum) and the projector will receive the signal with no problem.
This is the best solution that I found, because is easy to find a Mac/Apple Mini display Port to VGA adapter.
Hope this works for you too.
Regards,
J.

Please I havea problem with my vga driver with windows 8

I tried several time to install windows 8 but the problem always come with vga driver . my laptop is pavilion dv6-6b90se
please give me some help
This question was solved.
View Solution.

Hi,
Please check the following link, it has Windows 8 driver(s) now but will be updated next few days:
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?swlinkmsg=100&cc=us&dlc=en&docname=c00042629&lan...
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

ITunes visualizer problem with RGB (VGA) connection to plasma tv

when i use my vga connection on my laptop to my plasma tv and use itunes, for some reason i cannot get the visualizer to work. it just goes black for a split second and then just back to itunes screen. any idea why that would be? the visualizer works fine when not connected via VGA.

Well I guess I won't get an answer here, can anyone tell me who/where to find out what the problem is? Thanks!

Problems with Acer VGA/RJ45 adapter

Hi All, I am new to this community. I have had an Acer Asire V5-571P for a year or so now and am frustrated by the internet connection port. The laptop came with an adaptor which has a VGA and a Cat5 connector. This has worked fine for most of the time I have had the laptop, but recently it started to work intemittently, so I bought a new one - an acer product, and that too has failed, leaving me just with WiFi. WiFi is fine, but by no means as good as wired. Are Acer providing replacements free of charge for these failed adapters. To be honest its a really very poor design - there is too much weight onthe cable and I suspect that this has caused the internal widers to break. This shoudl have been a rigid piece of kit and not as it is designed.Not at all happy with this feature on the laptop.Any thoughts/advice before I go direct to Acer on this issue?CheersPer

Honestly? i would contact Acer support service, 2 adapters broken is not a standard behaviour.

Having problems with my VGA adaptor for iPad.

I bought the VGA adaptor for iPad from BB the other day, and when it arrived, I could not get it to work with my iPad (iPad 1 with latest OS). I tried adjusting settings on my monitor (I'm using it with my second computer monitor, a 24" AOC brand), but I could not get anything to display. I tried plugging it into my new iPhone 4S, and it worked flawlessly with every application. I then tried using it with my new iPod Touch, with latest OS installed, and it would not do anything either. So I have this adaptor for iPad, and it works with my iPhone 4S, but not my iPad or iPod Touch. Does anyone out there have any answers or suggestions?
Thank you for your time...

JCinINDY-
The iPad 1 only sends video to the adapter when a slideshow or a video is playing. You can not see the normal iPad 1 display on a VGA screen. It does not support "mirroring" the way an iPhone 4S will.
That said, it is possible you have a bad connector on the iPad 1. If you can take it to an Apple Store Genius, they should be able to verify whether or not it is working correctly.
Fred

Problem with latest VGA driver

Hi,
I wonder if any of you smart people out there can help.
After installing newer driver than version 31.00 on my GF4 4400. (Doesn't matter which, as long as it's newer than V31.00) My PowerDVD software will not work.
When I tried to play DVD movie, a message pop up saying something like "Your TV-OUT port is not working properly. This copyright DVD will not play when your TV-OUT port is enabled"
My question is:
1. Why doesn't this happen with V31.00 but does with anything higher?
2. I'm not even using the TV-OUT port. (Nothing is connected to it). How do I disable it?
Please help. Otherwise I'm stuck with driver version 31.00 and can't get any higher. (Version 44.03 seems to give higher 3DMARK 2002SE score)
Thanks in advance.
KS

No one can help yet???
Nevermind. Have sorted it out by myself. All I had to do was download a patch for the PowerDVD programe. Everything is now fine and I can use version 44.03 of the Nvidia driver. (In my case, I've installed the MSI version)
3dMARK 2002SE score has jump up by almost 1000 points compared to version 31.00.
Thanks.

Problem with lenovo t60 and the vga output

I have a problem with the vga output and the lenovo t60
When i put the videoprojector connector in to the lenovo t 60, the projector reponde is:
Not supported
H: 48.20khz v: 143,10 hz
On my desktop pc the projector function on 1024x768 resolution and the 60 hz to refresh.
The same configurations are on my laptop and the projector doesn't function
Please help me.

I too have this problem. My T61 worked fine for about a year, and then suddenly would no longer project. I had made no changes to the settings for the external display, though since the problem started I've tried many combinations without success. Typically the projector reports that the frequency settings the laptop is sending are unsupported. In my case the vertical rate is usually correct (60 Hz) but the horizontal rate varies wildly.
I suspect a hardware problem, as this post suggests: http://www.edugeek.net/forums/av-multimedia-related/32128-laptop-wont-display-projector.html. (Note the message claiming that 6 out of 40 Lenovo laptops exhibited this problem.)
Since my system is still under warranty I guess I'll have to get it repaired, but I'd rather hear of a software fix...

K7N2-ILSR Problem with VGA

Hi,I have a problem with my K7N2-ILSR motherboard.
I have problem with my VGA card ?( :
ATi Radeon 7000 64Mb
Problem:
after installation WINXP and consecutive in-boot system come to notification errors due VGA and follow reboot

DanteA,
Load the nForce Drivers from nVidia and the Catalist Drivers from ATI and see what you get. (Install them in that order.)
Take Care,
Richard

Problem with play video on TV

sorry my english. I have problem with some VGA cards with TV-out.
When i set on VGA properties clonning view / nView / and i play video via windows media player, on secondary monitor is blank screen - in media player. Desktop is show correctly.. Is this direct show problem ? Is some way to fix this problem ?
thanks

I have to assume that the tech support people took you through the basics, like eprebooting the iPad and quitting the videos app, but here is something that sometimes help with the "black, blank" video screen.
Swipe to the right from your first home screen to get to the iPad Spotlight search. Type in the name of any of your movies in the field at the top. When the movie appears in the search - tap on it and it should hopefully start to play. Let it play for a minute or so - hit done - go back to videos app and see if all is OK.

Problems with my VGA

Similar Messages

Maybe you are looking for