Problems with N900 connecting to Ovi Suite
Firstly appologies if this has been covered before.
I'm trying to connect my phone to Ovi Suite via USB cable on my PC, I continually get the message that the device is not currently supported. Upon looking on the support site, it clearly says the N900 is compatible. If it helps my Ovi Suite software is updated to the latest version 2.1.1.1. Does anyone have a fix for this??
ok, just had a closer look.
It seems that when you type 'N900' in the compatibility test, it then shows you the link to download the Nokia PC Suite.
Similar Messages
-
Problems with USB connection and PC Suite
Connecting your device to the PC via USB doesn´t always work as smooth as it should. You can either use the setup´s repair function or if you are experiencing more serious problems, you need to uninstall all Nokia software form your phone and get it back on to make to work again.
This is how you do it:
Run the Nokia PC Suite setup file again and choose "repair" instead of "uninstall". This should solve some of the connectivity problems. If it didn´t work for you continue with the instructions below.
Go to Start --> Settings --> Control Panel --> Software, there you need to uninstall all Nokia software (Nokia PC Suite, Nokia Cable driver, PC Connectivity Solution ...)
Download and run Nokia PC Suite Cleaner
Reboot your computer
Download and install PC Suite here.
Connect your phone via USB cable (if possible use a different USB jack) and follow the instructions on the screen.
Now you´re set up to manage your phone with PC Suite!
For further questions ask within the board, for improvements on this article contact me.
Thanks to users scoobyman, cricfancy and shuntfield for their collaboration.
Message Edited by illinjah on 16-Aug-2009 07:02 PM
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.Hi pudu
thanks for the reply!
so sad, that doesn't work for me. the same with Nokia_PC_Suite_6_84_10_3_eng_us_web.exe
I have widcomm stack for bluetooth, there are lot of concerns about this,
but I do not understand why it cannot be connected via USB, too. Oh, no, it is connected, but that makes no sense -
N8 wont connect to Ovi Suite..
Hi,
I'm facing a connectivity issue with ovi suite on my company laptop (windows XP). When i connect the cable, the phone says "connected via ovi suite", and the tray pop up bubble says N8 connected via Ovi Suite, but when I go to the Ovi suite home screen, the bottom of the page shows a N8 icon, and says "Setting up"... and that's ALL!!! That goes on indefinitely, and no sign of any syncing happens... I finally have to connect to the N8 via my PC suite version 7.1.40.1, which works perfectly.
Meanwhile, Ovi suite works fine with my N8 on my personal laptop (Windows 7).
Anyone can help me out with this? Its pretty frustrating. I've tried repairing the Ovi suite installation, but it doesn't seem to have made any difference.
Thanks..
Riddhi
Solved!
Go to Solution.I changed my phone from an E7 that worked well with PC suite to a N8 that would not work at all until, read below.
How i got my N8 to work with PC Suite 7.1.51.0
I found this by accident and it works. When I connect by USB I taped the top left of screen when the USB connect pops up. Be quick it only displays for about 1 second.
This brings up a USB connections list of 4 different connections.
Ovi suite
Mass storage
Media transfer
Conn pc to net
I tried all connections and fu#k me when I Connected by Media Transfer PC suit connected.
It was in non-compatible mode.
A few windows XP explorer popped up and PC warnings. PC suit stated the connected device is not supported.
I ignored all of this as PC suite displayed N8 in the phone connected.
It was connected to N8 in non-compatible mode.
Every thing worked the only problem was the calendar accepted entries only no alarms or type of display.
When I disconnected the phone and went into the calendar all entries were all there.
I had to change the type and add alarms.
When I checked my phone book all entries had been saved.
I reconnected again and did it again to make sure it was not a fluke so now I have deleted Ovi Suite and use PC Suite 7.1.51.0 It works for me.
Hope this might help others.
MODERATOR'S NOTE: This post has been edited. Please be reminded that inappropriate and unconstructive posts are not allowed in this forum. Please show some respect to Nokia and to other users of this forum. -
Problem while trying to install OVI suite
Hi, guys! How you doing? I've got a problem while trying to install OVI Suite: I'm getting a warning signal that says "Something got wrong - Nokia Ovi Suite installations require that PC Connectivity solution 7.0.0.0 or a later version to be already installed before continuing installation" and I can't install after that. I've been searching at Google, but I have found nothing. Hope you can help me. Thanks in advance.
Attachments:
error.png 7 KBMany thanks : I had been directed to this file already, but it was the french version, with many translation mistakes that made it unusable. Much clearer in english.
I have
Again the tab problem !
Message Edité par chilly charly le 12-06-2005 02:45 PM
Chilly Charly (aka CC)
E-List Master - Kudos glutton - Press the yellow button on the left... -
Every time my phone connects to ovi suite via blue...
I have a 5800 XpressMusic with software version 51.2.007. I am using Ovi suite version 3.1.1.90 on windows 7. every time my phone connects to ovi suite and automatically syncs, 2 "bluetooth messages" are recieved (just like when I send a picture to the phone via bluetooth).when I attempt to open the message, an error message shows up on the phone that says "Messaging: feature not supported".
This seems to happen just after contacts are synched, and began happening with the latest update to Ovi Suite.
I would prefer to not have to delete these messages constantly.Hi All,
For assistance about any unresolved concerns or complaints about your device, we highly recommend that you use the "Contact Us" link at your local Nokia website or get in touch with your local Nokia Careline.
Kind regards, -
Problem with JCo Connection Pool
Hi,
I have a problem with using an RFC Model in my WebApplication. So sometimes the access to the function block works, and sometimes it doesn't work. Now I know, that there is a problem with the connection pool. Look at this message:
com.sap.mw.jco.JCO$Exception: (106) JCO_ERROR_RESOURCE: Connection pool WD_X24_MODELDATA_DEST_CPIC_REKTO_DE_useDefinedUser is exhausted. The current pool size limit (max connections) is 10 connections.
So it looks like a problem with closing the JCo Connections after using. Do know where the problem is? Because I'm using many other function blocks with no problems.Hello,
You need to increase the pool size via Visual Administrator.
Server 0 -> Services -> JCO RFC Connections.
Change the pool size from there. I believe a restart is in order.
Regards,
Jan -
Problems with ipod connection.
Problems with ipod connection.
I have problems to connect my ipod to computer windows 7.
When I connect I get the following error:
"We encountered an ipod, but could not be identified correctly. Disconnect and reconnect the ipod and try again."
And it recognizes the ipod when trying to go play music or videos make me the following error:
"Error while trying to copy on disk. The device is not connected."
I've uninstalled all apple applications and re-installing, as I formatted the ipod and continues to set the same error.
What else can I do?Hello,
While your symptoms don't exactly match the descriotion, this article may be usefull in discovering if there is a setting on your computer that is causing this to happen.
iPod not recognized in 'My Computer' and in iTunes for Windows
http://support.apple.com/kb/ts1369
-Griff W. -
I have an iPhone 4. I use iTunes 11.1.5 on my Mac. I am trying to update to ios 7.1 through iTunes, but every time I do that, I get a "connection reset" error, even when I know there has been no problem with my connection.
The exact error message is as follows:
"There was a problem downloading the software for the iPhone "Anne's iPhone". The network connection was reset.
Make sure your network settings are correct and your network connection is active, or try again later."
I have checked several times. There is no problem with the connection, and I have tried to download the software several times today.
Any help you can give me would be appreciated.Just managed to successfully download the update, having retried five or six times. I did unplug my phone while the download was taking place (had asked iTunes to download only, not to update) -- suspect this had no bearing on it whatsoever, and that persistence is the only way here.
-
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Exchange Server 2010 SP3 - Rollup 8 - Issue - Problems with client connections - MS Outlook 2013
Detected Problems:
- Access denied for attached mailbox (department mailbox)
- Access denied for delete or move messages on own mailbox
- Can't send new messages with error (Error: [0x80004005-00000000-00000000])
Solution:
- Rollback to Exchange 2010 SP3 - Rollup 7
- You can rollback to Exchange 2010 SP3 - RollUp 7 in 30 min
Algunos de los destinatarios no recibieron su mensaje.
Asunto: Hola
Enviado el: 11/12/2014 8:35
No se puede localizar a los destinatarios siguientes:
'[email protected]' en 11/12/2014 8:35
Este mensaje no se pudo enviar. Inténtelo de nuevo más tarde, o póngase en contacto con el administrador de red.
Error: [0x80004005-00000000-00000000].See the following forum thread:
https://social.technet.microsoft.com/Forums/en-US/1be9b816-b0ab-40ea-a43a-446239f8eae3/outlook-client-issues-following-exchange-2010-rollup-8 -
My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category
My station is listed on Itunes Radio stations, but there's a problem with the connection. Does any body help us regarding this issue? The station name is KRAL FM under the Top 40 / Pop category
-
I can't make a purchase with iTunes because it says there's a problem with the connection. How do I fix this?
Morning Gjakleinmark,
Thanks for using Apple Support Communities.
For more information on this, take a look at this article:
Can't connect to the iTunes Store
http://support.apple.com/kb/ts1368
Best of luck,
Mario -
Problems with Document Connect
I have a problem with Document Connect. I am unable access office live workspace.
I have been on the help line with microsoft but they were unable to help.
Then I went to an apple store and was informed by one of the sales assistance that Document Connect never worked with the apple. Well what was the point in having it then?I wish I knew what Document Connect is. I'd bet I could fix it. Not really, but what is it?
-
I have an Ipad mini with IOS7. A few days ago I began to have problems with wifi connectivity. I can connect to wifi with Google but cannot navigate in Safari nor any of my aps are able to acess wifi. Very strange. Not sure what to do!
Hi ..
Reset the device:
Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
If that doesn't help, tap Settings > General > Reset > Reset All Settings
If that doesn't help, tap Settings > General > Reset > Reset Network Settings
You may have to re enter your Wi-Fi password.
If nothing above has helped, try here > iOS: Troubleshooting Wi-Fi networks and connections -
Hi,
I have this Windows 2008 R2 on which I installed remoteapp some years ago.
Now the certificate expired and I get the message
"There is a problem with this connection's security certificate
The remote computer cannot be authenticated due to problems with its security certificate.
Security certificate problems might indicate an attempt to fool you or intercept any data you send to the remote computer."
How should I renew the certificate? I already went to certification store and tried to renew certificate with same key but then it says "the request contains nor certificate template information".
Please advise.
J.
J.
Jan HoedtDoes the computer account have Enroll permission to the certificate template?
From the Server running your CA, run mmc, click File then Add/Remove Snap-in...
Add Certificate Templates and click OK.
Find the certificate template, then right click and select properties. On my CA its call ed RemoteDesktopComputers but might be called something different depending on what what template your certificate is based on.
On the security tab, click Oblect types, check Computers then OK. Enter the Computername and click OK. Then give your computer account Enroll permisssion.
HTH,
JB -
but every time i try to its fine until it processes it and then it says it has a problem with my connection but my firewall is off?? Please help.
I'm having the same problem trying to update my iphone 4(Just got a replacement), I also have firewall off...Hopefully someone can help. Mine says error -3259
Maybe you are looking for
-
Is there a way we can edit and improve existing youtube videos by using premiere pro? Just simple changes like having professional looking opening and closing credits?
-
I need the dialog box (which contains page selection etC) HOW TO MAKE IT?
hi i have done an requirement in smartforms. i need the dialog box (which contains output device name, page selection etc) when i take the print (smartforms). And now i already can see a dialog box .but still it doesn't have the page selection. I mea
-
Read-Through Caching with expiry-delay and near cache (front scheme)
We are experiencing a problem with our custom CacheLoader and near cache together with expiry-delay on the backing map scheme. I was under the assumption that it was possible to have an expiry-delay configured on the backing-scheme and that the near
-
WRT610N - Samba Storage Problem with Mac OS X Leopard
Hello there, I've set up a USB drive to be shared via the router (tried both a fat32 and an NTFS drive). When I login from a windows machine I can use the share point without any problems. When I try to use it from a Mac (mounted via smb://192.168.1.
-
Solution Manager - Monitoring - Instance Status
HI all, I'm trying to configure in "setup system monitoring" the alert on "Instance Status" but is always in staus "Alert is active but not accessible". The others alerts work fine. I have already configured the ccmsping in rz21 and in rz20 ever