Problems with N97 after upgrade to v11 software

Hi, after upgrading to v11, I thought I found my N97 slower. For example, the time take from the click of the "New message" icon till the time the SMS message writing app is ready for input can sometimes take like 3 seconds. Does any have a similar experience?
Also, not sure if it matters that much, but it does make me uncomfortable. The "C:" drive has only about 10MB free. It was like 20MB before my firmware upgrade (which is plenty too small still, imho). This is even after clearing the web browser cache (which I suspect is going into "C:" drive). Is this something to worry about? Is there a way to increase free space? What happens when I run out of space?
Regards,
.lzs

i have 32 megs of ram
35.1M phone memory
28.1 GB on flash memory
this is with the following
on the c i have installed :
ovi mpas ( cant chose where it installs for the most of these apps/services)
accu
adtronic (a part of profile scheduler)
amazon
api bridge
ap news
bloomberg
facebook
facebook installer
license manager
ovi store client
slideshow
youtube
i think this is most of it
and the phone is actually faster then it was prior to update. i do clean the cache diligently as it does take up some space. i have not run out of memory yet. make sure all the apps and stuff that you don't need are not running in the background
Message Edited by radical24 on 10-Jul-2009 10:51 AM
You know what I love about you the most, the fact that you are not me ! In love with technology and all that it can offer. Join me in discovery....

Similar Messages

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

I am having problems with mail after upgrading to mountain lion. Is there a way to go back to lion?

It would always be easier to fix the Mail problems.

Problems with Mail after upgrading to 10.9.1

I am running into problems with Mail after installing 10.9.1. I had NO problems with Mail prior to this update.
Problems I have encountered so far are:
- I don't receive some e-mails on my Gmail account.
- I have sent e-mails that supposedly got "sent" but do not show up in my Sent box both on mail and on web Gmail. My Outbox is empty also.
Has anyone encountered the same problems and found a solution?
Thanks in advance!

Yes Paul I have, but no solution. I cannot send email. My ISP uses a smtp mail server for sending and It will not log in. Have had ISP on phone and checked all settings. Can only put it down to Mavericks.
It worked OK for a week after upgrading then stopped. So now having to use web mail to send email.
Strange thing is I receive mail OK, just cant send.

N97 - Problems with hearing after upgrade

I updated my firmware on my Nokia N97 as i have been having numerous problems with dropped calls, my phone freezing and apps dissapearing from my home page. I had to reset my phone constantly as it would freeze in a call.
I updated my firmware to version 22.0.110 yesterday 06 July 2010. Now i cannot hear the other person on the phone calls. I try to adjust the volume level on the side to make it louder but this doesn't help. I reinstalled and it still is the same.
My phone is now worse than before...now i cannot even make phone calls as i cannot hear the other person, but they can hear me clearly.
Can someone help or are experiencing the same problem after the upgrade?

Hey, i have same problem with my Nokia N97mini.
Try to press with your finger to the earpiece zone when you cannot hear.
You never can fix this via upgrade or hard reset.
its hardware bug in all nokia s60v5 phones.

Is anyone having problems with keynote after upgrading to Lion?

After upgrading my system to Lion, my keynote presentations are becoming a nightmare. They crash all the time, and are becoming significantly slower, not just due to the autosave but after making just a few movements the beach ball appears and takes forever for me to be able to edit the document again. When I try to put into presentation mode the computer stops, sometimes I even lost the images inside the saved prasentation, and when I tried to recover from the auto saved versions, they were corrupted also. I talked to the apple support here in Brazil and after running all kinds procedures to check and fix the disk and hardware even in the safe mode, it still remained with the same problem. Another suggestion was to reinstall the keynote, and I even bought a new version from the app store even though the old one was updated. Again, nothing changed. Does anyone have the same problem or knows what to do?

Hi Thomas - listen, I want to tell you that we aren't necessarily all in the same boat...what I mean is that this problem almost ruined my business and I spent a long time reading the dozen or so threads in this board, and tried solutions people suggested in each one. I had two separate problems...the first was like yours, and it was indeed solved by the time machine save setting mentioned above. The other was that I couldn't get an object selected with a click of the mouse every tenth time or so...I had to click onto a different slide and then come back to mine. I started turning off every single piece of hardware and software one by one, in search of a conflict. It turns out that my Apple Magic Mouse was the problem. I switched it to a plain MS wireless mouse and problem solved. *****, but it let's me continue. My point is that too many people are using Keynote just fine for any of us to throw in the towel and say it's universally and irreversibly broken. There are different bugs in play, but you have to go on the assumption that there's a way out if you can spot what's not quite right. Sorry I don't have your specific solution, but this mindset is what saved me from jumping ship to PPT.

Problems with plugins after upgrading to win8

Hi
I made the upgrade to Windows 8 and now several PS plugins causes Photoshop CS6 to "Stop Working And need to close". I have uninstalled
and reinstalled plugins and still the same problem. As this happens with different plugins from different vendors I am led to believe this is
not a 3rd party problem, but rather a problem with PS in win8. Happens with plugins from Niksoft and RedGiant. Needless to say I have
all the latest software and updates - legally purchased.
I haven't done much research into this, posting here is my first step after googeling didn't help. Is this a common problem? Does anyone
know a fix to this? It's of such importance that I am already considering reinstalling win7.

As an update on this,
After I installed the latest Windows Update system fix packages that were released today most of the plugins now work. I am not 100% sure I can credit MS with fixing this, as I fiddled with alot with my graphics card trying to make this work at the same time as I updated. I will have to do some more testing on this to able to say exactly what was the problem.
I'm installing win7+ps on a virtual machine so I can use that when absolutely needed for the plugins still not working - guess I can live with that until certain 3rd party vendors sort things out.
Allright Noel, I get your point - but you have to be downright difficult to be reading my initial question as if I was seeking support on 3rd party software as such.

Problems with passwords after upgrade to Mavericks

Hi,
After upgrading to Mavericks I have problems with passwords. MacOS allows me to log in with my password but when I want to install software it does not accept my password. I can go to the user tab in system preferences and change my passwort there. With the new password it works, but when I change to the old password, I have the same problems. Strange ...
Thanks for help

OK. I found the problem (probably it is not related to the upgrade): When I install an application and the installation procedure asked me for a password it switched the keybord driver to a language I only use infrequently. Since my original password contained special characters the change of the keyboard driver was the cause for my typing in a wrong password. When I tried changing the password I used "abc" and this worked since it did not contain any special characters. So everything explained and a bug for Apple to fix.

[SOLVED] Problem with murmur after upgrading to 1.2.3-4

I've been running Murmur on my server for a long time without problems. The last version I had running was 1.2.3-3. After upgrading to 1.2.3-4, the already-running murmurd process crashed after a while (some hours after the upgrade, after constant use) and I'm unable to restart it. The message I get is:
:: Starting murmur [BUSY]
<W>2012-01-07 22:06:11.133 Initializing settings from /etc/murmur.ini (basepath /etc)
<W>2012-01-07 22:06:11.134 OpenSSL: OpenSSL 1.0.0f 4 Jan 2012
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA StartCom Certification Authority
<W>2012-01-07 22:06:11.134 SSL: Adding recommended CA AAA Certificate Services
<W>2012-01-07 22:06:11.135 SSL: Adding recommended CA UTN-USERFirst-Client Authentication and Email
<C>2012-01-07 22:06:11.135 Successfully switched to uid 1007
<F>2012-01-07 22:06:11.230 ServerDB: Failed initialization: unable to open database file Error opening database
[DONE]
and in murmur.log nothing gets written. Downgrading to 1.2.3-3 works, but I thought I'd look for the cause of the problem.
After poking around a bit, I noticed that my murmur database (/var/lib/murmur/murmur.sqlite) belongs to a nonexistent user with a UID of 86 and a GID of 86, as well as the whole /var/log/murmur/ directory. I also noticed that a new murmur user and group with UID and GID of 1007 and 1000 exists on the system now. It seems that running:
sudo chown -R murmur:murmur /var/lib/murmur/ /var/log/murmur/
fixes the problem. Perhaps the update deleted my pre-existing murmur user and group and recreated them?
Edit: Guess I should mark this as [SOLVED].
Edit edit:
Also turns out the whole /var/lib/murmur/ directory has to belong to murmur, not just the sqlite file.
Last edited by n17ikh (2012-01-08 03:22:39)

I had the same problem and fixed it like you.

Wifi problem with Mac after upgrade to Mavericks

I just upgraded to Mavericks but something wrong with my wifi.
i can get internet through LAN link from Airport but not through wifi even i can receive an IP address
i tried connect to hotspot with my iphone5s and it works.
Other devices can use wifi just fine through Airport, just not my Mac using Mavericks
In conclusion,
Airport should be fine because my other devices works.
Mac wifi should be fine too because i can connect using hotspot.
so why it's not working when i connect Mac to Airport?

I was having problems connecting to Wifi with my Macbook Pro (!2010), after upgrading to Mavericks. I was on the phone repeateadly with AT&T because I have Uverse. Testing everything (channels, signal strength) and had techs come out to check the line, ports, switches, etc. When I hardwired the Mac into the Uverse router, it worked fine. This rulled out any problems with the line in.
I considered getting a repeater but then I read that repeaters are not really good and it is better to reconfigure a router to act as an access point on the network. Plunked down about $80 for a Belkin AC750 router at Best Buy. In the setup it has an option to set it up as an access point only. Clicked that, connected it to my Motorola NVG510 Uverse modem and then connected to the Belkin router from my Mac. Voila! It's been a solid 11+ Mbs ever since (my plan maxes at 12Mbs). Connection is still solid and life if good even though it ***** to plunk down another $80 for a second router. But it was worth it just to get rid of the headaches.
I think the wifi capabilities of the Motorola NVG510 modem are the cause of a lot of problems with AT&T Uverse issues, particularly for Mac owners. I think it was also causing my Airport Expresses to drop occasionally.... Few minutes of music then drop... music drop.... All gone now.
I don't know if you are on Uverse but if so, I highly recommend configuring a second router as an acces point (it can be any old router you still might have - the setup is just a bit trickier because you have to do it manually).
Good luck.

I Phone 4 - problem with bluetooth after upgrading to ios 4.2.1

Since I have upgraded the software on my I phone 4, I have noticed a problem with my hands free kit in my car using bluetooth. When I make a call the sound comes through the system ok, but if I dial to voicemail the sound doesn’t come through. I never had this problem prior to the upgrade. Any suggestions?

At least there is a way! only problem by doing this is, on the vodafone network you have to input your phone number followed by a pin every time if you access using +447836 121 121. The short key 121 is the way forward! Will this be fixed? is there a way of taking the I phone 4 back to previous version of software?

Problem with BIS after upgrading to v5.0.0.822 (1385) :(

Hi all,
I have a Bold 9000 and after upgrading software to v5.0.0.822 (1385) my BIS start working. I do have BIS conection, however the service is turned off on the phone. How can I activate this? If try to acess to the web the web browser tries to connect to wi-fi and I cannot change the type of connection to BIS.
Very grateful for our help.
Best regards,
Bruno
Solved!
Go to Solution.

bsousa wrote:
my BIS start working.
Perhaps, you intend to say "stopped" working?
If you have a BlackBerry Data Plan on your service provider account, on your BlackBerry device, go to:
1. Options > Advanced > Host Routing Table > Menu > Register.
2. Resend your service books from your carrier BIS site:
From your handheld device:   http://www.blackberry.com/btsc/KB15402
Go to the Personal Email Set Up icon and log in. Then under Help!, select Service Books, then select Send service Books.
From your desktop PC: http://www.blackberry.com/btsc/KB02830
North American Carriers - scroll down to select your carrier
WorldWide Carriers - Find your carrier on the list
3. With the BlackBerry device powered ON, remove the battery a few seconds and then reinsert the battery to reboot. This reboot, even if you have already done this, is often needed to install the service books.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4   Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA   Display/Scan Bar Code

Problem with colors after upgrading to Lion

After upgrading to Lion, I could no longer distinguish between very light greys (e.g., #f8f8f8) and white (#ffffff) on my laptop monitor. The difference is readily apparent on many websites.
If I plug my laptop into an external monitor, the problem goes away, and stays away even AFTER unplugging it.
Neither recalibrating the color profile nor rebooting have any effect.
Any ideas?

iPhoto is not part of Lion. It comes with a Mac. So, the version you own is the one that came with your Mac. If you want the newest version, you'll have to purchase it from the App Store.

Problem with contacts after upgrading to iOS 7 (iphone 5)

After upgrading to iOS 7 (iphone 5), the contacts (loaded from icloud) in greek language aren't sorted!!! They are under the # symbol!! Anyone has a solution. I didnt have this problem with previous iOS versions!!!!

My phone was fine after I connected to iTunes. It appeared in recovery mode and then it downloaded the update, installed and all was fine.
Regards,
Jeevan.

Problems with Mail after upgrading to MAC OS10 version 10.6.8

I upgraded to MAC OS10 version 10.6.8 about ten days ago, and have since had lots of problems with mail. Since I upgraded, I have downloaded several software updates, including one for improving the general softeware system of Leopard. Since this morning, I no longer have the Mail icon in the dock and when I try to open it in Applications a window comes up saying:
'You can't use this version of Mail with this version of Mac OS X. You have Mail version 4.5 (1084/1085). It can't be used on Mac OS X Version 10.6.8 (Build 10K549)
Can I download a version that I can use with this Mac, and can anybody give me the site where I can find this. I have tried without success

You should consider downloading the 10.6.8 combo updater and applying it again.
http://support.apple.com/kb/DL1399
Pondini has a great page about upgrading.
http://pondini.org/OSX/Combo.html

Problems with 8310 after upgrading to V4.5

Alright I will start with my phone it has locked up and my alarm doesnt work all the time. I have taken the battery out and restarted it, this sometimes works but then it is back to not working again. My husbands phone is much worse it crackles real bad then it turns off. We werent having any problems with these phones until we did the upgrade. Is there someway to fix it?
Thanks
Jenn

Sorry Made mistake.... Disregard first post
TRY THIS
Had some problems after upgrade from tiger to leopard ...Clicked on mail and It wouldnt open.
Had to click on tool bar on top window/message viewer to see my inbox and stuff, then force quit to get out... plus email didnt work
checked all POP settings which were correct( I know cuz I looked at my macbook pro's POP settings and did the same on Imac)
Anyhow...called apple care ...EZ fix
Quit mail if yer on.
Go to Home folder/Library/mail/shiftClick on messageRules.plist And messageRulesplist.backup
Drag and drop messageRules.plist And messageRulesplist.backup to desktop... then highlight preferences folder and drag into that folder
If yer POP settings r right this should work
It did fer me!!!
Good luck
Message was edited by: soboo
Message was edited by: soboo

Problems with N97 after upgrade to v11 software

Similar Messages

Maybe you are looking for