Problems with new hard drive in zen x

i bought 2 new hard dri've a toshiba 80GB Mk8032Gas and a Hitachi Travelstar 80GB Hts54680j9at00 and somehow?i can't format hard dri'ves cause it says hard dri've problems. this is driving me nuts any help will be nice.?

That sounds pretty close to my problem too...
My 60 GB Zen Xtra (aka: the mp3 wonder brick) died a sad death this new year's eve
with an unexpected headphone snag/drop combo.
After that fatal drop, it would boot up to the rescue screen and only the Reboot option worked.
Choosing any other options just made it say: HARDDISK PROBLEM.
Then the other day, I finally got motivated to resurrect it from the dead,
so I went to Comp USA and picked up this monster:
Seagate Momentus 5400.2 20GB Hard Dri've
5400RPM, Internal, 8MB, ATA/00:
http://www.compusa.com/products/product_info.asp?pfp=BROWSE&N=2002+502460+42949670 7+400093+429496694+429496676&Ne=30038&product_code =344258&Pn=Momentus_5400_2_20GB_Hard_Dri've
I took out the old busted dri've and the new hard dri've fit right in place...
snug as a 20gig bug. I put the whole thing back together and started it up but after aaall that,
it still does the same thing as before. It takes me straight to the rescue screen.
Option : Clean Up - Lets me select it but does nothing and goes back to rescue menu.
Option 2: Format All - Displays: Harddisk Problem
Option 3: Reload OS - Displays: Harddisk Problem
Option 4: Reboot - Reboots just fine and comes back to rescue mode screen.
So with the new dri've, I plugged it into my computer via USB and it didn't even recognize the device.
I then installed the newest drivers from Creative: JB3MV2_PCWDRV_US_2_0_00
Then suddenly it pops up on my computer- New Hardware Added: Nomad Zen Xtra!
Woohoo! Progress.
So then I tried the famous firmware upgrade- ZenXtraP4SAudible_PCFW_LB_2_0_03.
At first, it said my battery levels were too low so I let it charge and soon it started installing fine.
I clicked UPGRADE and clicked past all the warnings and then it displayed- Upgrading in Progress. Please Wait.
On the Zen's screen, the rescue menu even changed to the data transfer image. So it's communicating!
Followed by- Player is now rebooting. Please wait.
But at this point the Zen's screen goes back to the rescue menu.
It seems like it just needs some help rebooting because it just hangs at this step,
so I've just been scrolling down to Reboot and rebooting from there
(like I said, it's the only working option on the rescue menu anyway).
My computer beeps and dings, acknowledging that a USB device is being connected and disconnected as the Zen reboots.
And here is where things go stagnant...
Once the Zen fully reboots, the firmware upgrade says- Checking connected device. Please Wait.
And it just hangs there. The Zen doesn't enter rescue mode.
Instead it displays the data transfer image. It will get stuck like that,
but the second I move the scroll wheel in any way during this process,
the data transfer image goes away and it goes back to the rescue menu.
The whole time, the computer still says: Checking connected device. Please Wait.
even though the Zen doesn't appear to be transferring anything anymore since it's at the rescue menu.
Yet, if I unplug the USB cable or reboot the Zen at this point, it'll say: Firmware Upgrade Failed.
I even tried installing this older firmware to see if it might work better: ZenXtra_PCFW_LA__20_08
and it appears to install successfully but the Zen doesn't show any signs that it's been upgraded to Ver. .20.08.
It still just starts up in rescue mode and displays the same old symptoms.
In fact, when I try to do the newer: ZenXtraP4SAudible_PCFW_LB_2_0_03 firmware upgrade afterwards,
it doesn't even acknowledge any upgrade to .20.08.
Instead, it still says that I'm upgrading from the original Ver. .03.02.
Any suggestions would be sooo greeatly appreciated.
My music world has collapsed and I feel like I'm stuck in the emergency room at the Zen hospital.
Thanks sooo much,
-pablo

Similar Messages

Restoring backup problems with new hard drive

Recently had to replace my hard drive (OS X Tiger 10.4.10). I had backed up iLife, iTunes and documents using the Backup utility (saving to external hard drive) and iDisk, so thought all would be well. My new hard drive has the updated OS (Leopard 10.5.5) and I cannot work out how to retrieve my stuff.
The Time Machine application obviously has no memory of my backup plans, and 'Backup' doesn't seem to exist, so I can't follow the restore instructions on that application. I can see that iLife and iTunes have been backed up on my external hard drive - I just can't see how to put the contents back. I have re-installed iLife and the iTunes application is ready and waiting.
My iDisk is completely empty - which means something is wrong or I completely misunderstood the point of it...
Any help gratefully received
Ross

Hi Lupe!
If you post the exact model number of the Seagate drive, I'll give the jumper setting a look to see it there is a limitation on setting to "slave." I wasn't aware anyone was doing that.
As near as I can tell, the basic problem is that the first-gen 733 QuickSilver does not have support for "large hard drives." That means that 128G is the maximum it can deal with. You can use the 160G drive, however, by using Disk Utility to create a partition of under 128G, say 125G, leaving the rest of the drive unformatted. Then it should work. Select the partition format as Mac Extended HFS+ Journaled.
Your G4 is older than the ones that this forum covers, thus the difference in hard drive capacities and also how hard drives are jumpered. You may want to make friends with folks in the forums for older G4s here:
http://discussions.apple.com/category.jspa?categoryID=113
Some of the same people haunt both forums so it's not a big deal if you decide to stay here. We're glad to have you either way!

Problems with new Hard Drive

I've just fitted a 250Gb Samsung hard drive to my MacBook Pro. I'm trying to do a clean install of OS X from the DVDs. I've partitioned the new drive to a single partition using disk utility and whenever I verify it or try to install OS X it gets stuck on "Checking Volume Bitmap".
Any ideas?

New drives often need extended preparation:
Extended Hard Drive Preparation
1. Boot from your OS X Installer Disk. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger.)
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. Otherwise, click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If you continue to have problems then either the drive is defective or it is not properly installed or it is not compatible with the MBP.

Problems with new hard drive installation

Our hard drive died, so we replaced it with a 250 GB Seagate Barracuda ATA HD. I used my 10.2 disks to install the software and system (after my husband installed the HD itself - I know nothing about the wiring and how it all works). I've done software update online, which brings me to 10.2.8. Now, I'm trying to use my CDs and DVDs to install any other applications I'd purchased, such as iLife. The disk icon appears on my desktop, but when I double-click it the installation does not launch. Then, I tried clicking on my installed applications, and they weren't opening either. I put an Apple Hardware Test disk in and rebooted, and my mouse wouldn't work to click on the "run test" button. What does all of this mean, and how do I fix it? Could the HD be installed incorrectly? This leads me to yet another question: when I replaced this HD with the Seagate, does my computer still have a SuperDrive? Sorry for so many questions in one post. They all relate to starting from scratch and re-installing everything with this new HD. Thank you for your help!

now, I had iPhoto open flawlessly and my install DVD for iLife seems to be working fine (installing Quick Time now). I have no idea why it took a few re-boots to get these items working. HMMMM... Assuming all goes well, my only question now is whether or not I still have a superdrive if I replace a dead hard drive?

Problem with new hard drive

Hi all,
The hard drive on my Aluminium iMac broke recently (it was running Tiger), and I replaced it last night (I bought a reconditioned hard drive online that was formatted for Macs. The hard drive is a Seagate Barracuda 7200.10 750 GB,Internal,7200 RPM). When I restarted the Mac it appeared to work okay, and went through first to the screen where you select your lanaguage, which I did, and then goes to the 'Mac OS X Utilities' menu. Here I can choose from 'Restart from Time Machine backup', 'Reinstall Mac OS X', 'Get help online' or 'Disk Utility'.
In the ideal world, I wanted to go for 'Reinstall Max OS X' but it's saying 'Set up or install a new copy of Lion', which I don't have (or, apparently, the memory to do it anyway!). I put in the Tiger installation disc, and although it recognises it in Disk Utility, I can't work out how to install it - no option comes up when I put the disc in, and no icon appears on the desktop.
As you might have already guessed, I'm not a computer expert, so if anyone has any help they can offer whatsoever then I'd be enormously grateful!
Many thanks for reading, and have a good day.

It sounds like the drive may have had Lion installed on it previously; and that the Lion recovery partition (which is created automatically when Lion is installed) may not have been erased. If that's the case, then you should be able to install Lion from it via the menu command you've found.
Note - there is no disk for Lion. It is only recently that it was made available on a thumb drive. Prior to that it was download only - hence the recovery partition, to allow a re-install in the event of a munged or erased system.
Re starting from the Tiger disk...
If you are using a wireless keyboard, wait until the startup chimes sound before pressing the C key.
You can also try pressing the Option key instead at that time. This will bring up Startup Manager, in which you can select the Tiger disk by clicking it, and then press Return.

Will Time Machine with Leopard Sync With New Hard Drive and Snow Leopard?

My computer is a 20" iMac that I bought in late 2008. The hard drive had trouble so Apple repaired with disk utility. Week later, more trouble so they did full hard drive erase. Data was backed up on Time Machine, 500GB also bought in 2008. After full hard drive erase, and reinstall of basic software, upon reboot, computer would power on then immediately off. It doesn't get past white screen. They advised a new hard drive install is needed.
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc. He could do it with Snow Leopard but I am scared. I'm afraid because my Time Machine last backup was with Leopard, not snow Leopard. I do not have my application discs with me, they are in storage in another state. Thus, if upon adding replacing hard drive and installing Snow Leopard my computer won't be able to sync FILES and APPLICATIONS from Time Machine because its on Leopard I will have a problem.
How can I either 1)Get a Leopard install disc and do that with the new hard drive install OR 2)make sure that a Snow Leopard install with new hard drive won't prevent my Time Machine from being able to install the saved FILES and APPLICATIONS if I don't have original APPLICATION (ie Aperture, Photoshop) with me? Thanks for any help you can provide.

thetrudz wrote:
A computer friend can install a hard drive just fine for me. However, I do not have the Leopard install disc.
Hi, and welcome to the forums.
That Mac should have come with Leopard. If so, call AppleCare. They'll send you replacement discs for a nominal fee.
Once this is sorted out, make a 8-10 GB partition on an external HD or your internal HD, and use the Restore tab of Disk Utility to copy the Install disc to that partition. Then you can boot and run from it instead of the physical disc. It will boot and run much faster, too.
He could do it with Snow Leopard but I am scared.
If he does, and doesn't provide a retail Snow Leopard disc, you must buy one ($29). It's a violation of the license to share software, and you'll need a SL disc to do things like restore a Snow Leopard backup, or the Snow Leopard Apple apps, or repair the internal HD.
Your best bet is to stay with Leopard, at least until you have access to your 3rd-party software discs.
What you can do, however, is borrow his Snow Leopard Install disc (assuming it's a white Retail disc, not a gray one that came with his Mac), and use it to do a full system restore from your backups. That's not a violation of the license, since you don't install or use OSX from that disc; you just use the Installer utility on it to restore the Leopard OSX and all your data from your backups.
See #14 in [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of the +Time Machine+ forum), for details.

Mediasmart software problem loading onto computer with new hard drive and operating system

My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?

waynesworld57 wrote:
My computer recently crashed and I had to buy a new hard drive and operating system. None of the programs from the old hard drive were saved. The computer is an HP Pavilion dv7-3165dx Entertainment Notebook and I have Windows 7 Professional (64x) as the operating system. Tried to download Mediasmart from the HP Web page to play DVD and Blu-Ray Discs. The programs downloaded but will not install. Any suggestions?
Hi,
It looks like it's a common issue: http://h30434.www3.hp.com/t5/TX-TM-Series-Notebooks-Reply-Only/HP-Mediasmart-Software-package-for-Wi...
Try VLC as a multimedia player: http://www.videolan.org/vlc/download-windows.html
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

MacBook Pro won't boot with new hard drive, but a different MacBook Pro will

So here are the details. My friend and I both have 13-inch Mid 2010 MacBook Pro's. Same processor and specs since they were purchased at the same time, but originally had 250 GB hard drives. His hard drive failed and needed a new one. Put a 500 GB Seagate Momentus 5400.6 in his computer, and tried using a flash drive with "Install OS X Mavericks" on it to install Mavericks on his new hard drive. No matter what, it wouldn't install. I finally was able to install OS X 10.9.4 on it by connecting the new hard drive to my computer with a USB hard drive enclosure. I put the hard drive back inside his computer and it wouldn't boot (stuck on the gray screen with apple logo and a spinning wheel). I then attached to the hard drive to his computer externally with the USB enclosure, and then it booted and worked perfectly.
So, it seemed like the problem was with something inside his computer, but then I switched our drives, and that doesn't seem to be the case anymore. I put my original hard drive into his computer, and his new hard drive into my computer, and they both booted and worked perfectly, so I have no idea why his computer will not boot with the new hard drive internally.
To summarize, his computer boots with: 1) new hard drive connected externally (won't work if it's internal), and 2) my hard drive internally
but my computer boots with: 1) new hard drive connected externally AND internally, and 2) my hard drive internally.
Both hard drives have OS X 10.9.4 installed
If anyone has any idea what's causing this and how to make his computer work with the new hard drive internally that would be greatly appreciated.

So after switching the internal SATA cables from each computer, now we have
His computer, with my SATA cable:
1) Worked with every hard drive!
My computer, with his SATA cable:
1) Works with 1 TB Toshiba hard drive
2) Works with 500 GB Seagate hard drive
3) Works with my original hard drive
4) Flashing folder with question mark with his old hard drive
So it turns out you were right! Definitely had something to do with the SATA cables. But it's still strange that mine was able to boot with all the hard drives except the one that was originally in his. So it seems like it was some combination of his SATA cable and something else, since when his SATA cable was in his computer only 1 hard drive (my original) worked, and when it was in my computer, 3 hard drives worked. But at least its working, and I'm just gonna keep our SATA cables switched since that seems to work out fine

Permission issues with new hard drive

Apple installed a new hard drive on my fairly new (june2012) MBP. The only backup I had was the time machine backup from the old MBP that I originally migrated from. Apple said no worries - I can restore from that so I did.
Today I bought an iphone. (I was a hold out, I'm all things mac since the 80s except the phone). I went in to clean up my Contacts before syncing the new phone to my MBP and I couldn't delete and contacts or groups. So I did a "get info" on my contacts ap and it didn't even have (user/me) on the list as a user. I added myself, gave me the read and write" capability and still can't make the needed changes, deletions or anything in Contacts, so I decided to check permissions using Disk Utility. I repaired permissions, and just to be sure verified permissions again. What a lllloooonnnggg list of issues and nothing has changed. Hit "repair permisions again and it is taking f o r e v e r. Now I am Verifying Disk to see what it says. No problem. Verify Permissions again - did it faster, but still a bunch of problems found. Repaired permissions again - same old thing - says its repairing, but I seriously doubt it. Am I supposed to do this over and over again?
Suggestions???

Back up all data. Don't continue unless you're sure you can restore from a backup, even if you're unable to log in.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. Do so only after verifying that those settings didn't cause the problem. If none of this is meaningful to you, you don't need to worry about it.
Step 1
If you have more than one user account, and the one in question is not an administrator account, then temporarily promote it to administrator status in the Users & Groups preference pane. To do that, unlock the preference pane using the credentials of an administrator, check the box marked Allow user to administer this computer, then reboot. You can demote the problem account back to standard status when this step has been completed.
Triple-click the following line to select it. Copy the selected text to the Clipboard (command-C):
{ sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:staff ~ $_ ; sudo chmod -R u+rwX ~ $_ ; chmod -R -N ~ $_ ; } 2> /dev/null
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window (command-V). You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning to be careful. If you don’t have a login password, you’ll need to set one before you can run the command. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2 (optional)
Take this step only if you have trouble with Step 1 or if it doesn't solve the problem.
Boot into Recovery. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. A Terminal window will open.
In the Terminal window, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window will open. You’re not going to reset a password.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select
 ▹ Restart
from the menu bar.

Wanting to upgrade Sawtooth 400 with new hard drive and more memory

Have been reading a lot of posts today on the above upgrades. Am quickly getting confused on all of the info, especially on the hard drive upgrades...
Purchased my Sawtooth back in Dec. 2006 on eBay. Should have been using it all of this time, but my budget wouldn't allow me to put more memory (it's got 256MB now) and a new hard drive in it. Tired of seeing it in the way just sitting there!
The G4 has OS X 10.3 on it. Would like to upgrade to Tiger. Is there a firmware update that needs to be done before upgrading to Tiger? I know that 256MB of memory really isn't enough for Tiger. I thought about getting at least a 512MB stick to make the total memory 768MB (wish I could afford to max the memory). Others have said that OWC and Crucial have good quality memory.
The System Profile shows that it has 10 GB and 60GB hard drives. Imagine the 10GB one is the original. The 60GB was probably added on later. Don't know how old the 60GB is. That's one reason I'd like to replace it to at least a 120GB drive, so I can start fresh without worrying about the 60GB dying. (Do understand that any drive can die; new or old...) Have read about the 128GB size limit on my G4. Don't think I'd use most of the 120GB, so I'd like to stay with that size. Budget won't allow to install a PCI card to allow larger drives anyway. Should I remove the 10GB one as I don't think I'd be using it at all?
I installed a Seagate 120GB Barracuda Ultra ATA/100, 7200RPM, 8MB Cache, 3.5" drive (new, got it on eBay for $40!) in my iMac G3 400. Would like to find the same kind of drive for the G4, if it would work. If the same drive would work in the G4, does anyone know where I could purchase one? Will look on eBay etc. in the meantime.
Thanks for any advice and/or suggestions.

Got the Seagate HD installed, PRAM battery replaced and missing PCI cover replaced. Sure wished that I had the extra memory to install now, but I haven't had the chance to order it yet. I know it's easy to do, but I'm going to have to move the Mac to the table and it's heavy for me to lift (bad back).
Anyway, I started to install OS 9 on the Seagate and have hit a stumbling block! Didn't have this problem when I replaced the HD in my iMac, but it was only a 120GB drive (it needed the firmware updated).
I've looked at other posts on installing OS 9 and even on Apple's support documents and can't find what I exactly need to do! Am getting more confused about it the more I try to find the right answers... Hope one of you can help me some more.
I was able to boot the Mac up from the CD (it's the white one with the orange "9" on it). I clicked on the "Mac OS Install" icon, click on "Continue" (on the "Install Mac OS 9) dialog box, and then it says: A valid destination volume can't be found. To continue the installation process, mount a valid volume for software installation." The destination disk options is grayed out. I then clicked on the "Utilities" icon, and then the "Drive Setup" icon. It shows a list of drives and I clicked on the <not initialized> Type ATA, Bus 2, ID 0, LUN 0 and clicked on the "Initialize" button. Then it says: New Partitioning: 1 Mac OS, Initialization Options: None. If you click on Custome Setup, it says that the Partioning Scheme is "Current Volume," 131072MB (131GB?), under Volume Info Type it says Mac OS Standard. The "OK" button is grayed out. If you click on "1 Partition" on "Partitioning Scheme," then the Volume Info Type says "Mac OS Extended, with Size showing 131071MB. The "OK" button is not grayed out. I didn't go any farther with the OS 9 installation, as I don't know what the heck I'm doing! Don't want to mess something up. Do you or anyone who has helped me with this posting, know the steps I should take next? The Seagate Owner's Manual says if you have a system that can't read the entire 160GB, to just partition the drive for 137GB for now if you don't want to add a PCI controller card etc. For now, all I want to do is use the 128 or 131GB (according to what it says) of the 160GB drive without using a different card or software to recognize all of the 160GB. Do I just do one partition or two... and what else? I'm completely lost...
Sorry for the long post, but had to write down the steps I took, so someone could tell me what to do next.
I don't think you have to worry about PRAM settings; they pretty much take care of themselves - and regenerate when they have to. The time to think about PRAM is when you introduce new hardware and catch your Mac expecting same old, same old, and it isn't.
It was kind of hard to get the old PRAM battery out of its holder. I pryed the right side retainer tab just a bit with a screwdriver to get it out. Noticed that one part of the retainer at the base was cracked! Hope I didn't do that! Put some super glue on the crack (was on the outside only from what I could see). Cleaned off the battery contacts with a pencil eraser and dry Q-tip before installing the new battery. It seems to stay in place even though with the side retainer cracked. If the side retainer would break off the next time the battery would need replacing, would the battery contacts hold it ok? Or would the whole logic board have to be replaced? I put a SAFT 3.6v LS14250 battery in it. The old one was a SAFT LS14250C. Hope the "C" at the end doesn't mean anything.

How to Replace existing Hard Drive with new Hard Drive, while keeping old files

Hi All,
I have recently replaced my hard drive on my Macbook Pro, with a new hard drive. The old Hard Drive was 160 GB, while the new one is 320 GB.
What I did before replacing it was clone my hard drive using "SuperDuper". I cloned it to the new hard drive and then simply removed my old hard drive and installed the new one with the clone on it. Then I booted it up and began running it. In fact I am using it right now.
My questions are:
Is this a good practice?
Will this work, without problems, indefinitely?
Is this the prescribed way to upgrade ones laptop hard drive?
The reason I did it this way was because I upgraded to Mountain Lion via the apple store download and I do not have the CD for the OS. So I figured if I could make a bootable copy, that might work. So far everything seems fine, but I really just want to know if this will last for a long time. I plan on also making a partition with Windows on it also, so I was wondering if anyone can comment on that too.
If anyone can comment or give any advice on this topic I would really appreciate it.
Thank you very much!
Cheers.

Every thing is fine except Super Duper does not clone the recovery partition. If you start your MBP holding the OPTION key, you should see the internal HDD and the ML recovery partition.
You can reinstall ML or reclone using Disk Utility>restore.
Ciao,.

Problems installing new hard drive

Hi
I have a HP Pavilion DV6000 (or according the the bios DV6700) and the original hard drive is on the way out, as the machine locks up after a short while of being logged on. I ran the hard drive diagnostics from the bios and it confirmed that there was a fault with the hard drive and i should replace it. I stupidly never made any recovery disks and as the machine locks up i cannot make any recovery disks, so im going to have to do a clean install of Vista from a CD i got from work, and thats where ive hit a problem!
I got a new 320gb SATA drive and booted up the Vista installation but it gets stuck on "unpacking files" then eventually gives up and says "Windows cannot install required files. Make sure all files required for installation are available. Error code 0x8007045d". Ive tried a couple of different discs for Vista but it still comes up with the same message. So i thought if i put XP on it, I could then maybe upgrade to Vista..... No luck there as i got a similar message when trying to put XP on. So i went out and got another hard drive but im still having the same problems!
Has anyone had problems with installing a new hard drive in a Pavilion laptop? Or has anyone got a suggestion how i can get Vista on to a new hard drive? Its really getting annoying now as its something so simple normally!
Thanks in advance

Similar problem. Created an image on a new WD 320gb SATA HDD, then put it in my 9000 Pavillion. All worked great, except when I then tried to upgrade to WIN7 from XP, I got the same error. Turned off all programs, used MSCONFIG to stop everything, but it kept stopping when unpacking the files. Same
0x8007045d error. Tried to put the WIN7 on a mem stick to then move to the HP laptop, but everything copied except a boot.wim file in one of the subdirectories. So I don't think that will work. Couldn't find anything that might help at the Microsoft site.

Problem: installed new hard drive but can´t boot from leopard dvd

So I just installed a new hard drive in my ibook G4. At first I started up the computer using the leopard DVD I had purchased. Got to Disk Utility and after a few seconds in the spin wheel came up and froze. So, I shut the computer down and when I tried to boot it again from the DVD I wouldn´t even reach the apple screen. Tried it a few times unsuccessfully.
As an alternative I just tried booting the comptuer using the original CD and it did read it.
I am currently at the installer page but I am concern about installing the old CD as I really would like to run the leopard dvd 10.5.
Is it that my ibook g4 can´t be booted from leopard dvd?
Please advise. thanks!!

OK, so I decided to leave my computer resting all night and give it a new try this morning.
This morning I was able to boot from the Leopard DVD, so I don´t really think it is a problem with my superdrive. Started to format at 32 minutes to complete. Then towards the 10th minute the spinning wheel appeared, I heard the fan running, then it stopped and then I heard the superdrive making some reading noises. Then all noises stopped and now the spinning wheel continues..not sure what to do now.
In the meantime, I wanted to share also another problem that I´ve been having for quite some time which I don´t know if it is related to my current problem. It is with the computer power:
- I´ve been experiecing load surges that take my computer from 100% to 1 or 0% and then goes to sleep or shuts down. The same thing happens when I am charging the computer.. it starts charging and showing 2 or 3% charge and then jacks up to 100% in minutes.
- My computer also makes like a slight humming noise sometimes when the ring around the power cable is in orange color, so I move it around until it stops. When I do that sometimes it goes from orange to green eventhough it is not fully charged. There has been times that under green it appears to be charging (battery charging icon on desktop shows up), and other sometimes like right now when it is in green color and the battery icon on the desktop says ´99%´. Weird enough, once I get the cable in a certain position it enables the battery to charge, if I keep it without moving it, the load surges disappear (at least for some days).
Should I try resetting the PMU? I´ve not done it because I don´t know what consequences it may have.
NOTE: When I bought the computer I never calibrated my battery because I was (and still are) clueless when comes to computer technicalities. I tried using a different power adapter and get the sample problem.
Below is the information I get from coconut battery:
My battery is in its 256 load-cycle. current battery capacity 58512mAh (original battery capacity: 4400 mAh).
The last system profiler I was able to pull shows:
Battery Information:
Charge Information:
Charge remaining (mAh): 58320
Charging: No
Full charge capacity (mAh): 58512
Health Information:
Cycle count: 256
Battery Installed: Yes
Amperage (mA): 0
Voltage (mV): 16250
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 15
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 15
Dynamic Power Step: Yes
Reduce Processor Speed: No
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On LAN: Yes
Wake On Modem Ring: Yes
Display Sleep Uses Dim: Yes
Battery Power:
System Sleep Timer (Minutes): 5
Disk Sleep Timer (Minutes): 10
Display Sleep Timer (Minutes): 5
Dynamic Power Step: No
Reduce Processor Speed: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On Clamshell Open: Yes
Wake On Modem Ring: No
Display Sleep Uses Dim: Yes
Reduce Brightness: Yes
Hardware Configuration:
Clamshell Closed: No
UPS Installed: No
AC Charger Information:
AC Charger (Watts): 26
Connected: Yes
Charging: No
Any help is greatly appreciated.
Thanks a bunch!!!

Help with new hard drive

Only a select few of us have found ourselves in this position. I am a student who takes his laptop to school for learning purposes however after doing a long night as the sound technician at a school show I put my MacBook Pro (Mid 2012 13" 4GB RAM Intel Core i5) into my bag put it over my shoulder and started to walk when I felt like a sudden weight had been lifted off my back and I heard the most colossal bang as then I find that the bag has snapped and my MacBook Pro is on the floor. When I get home I hastily go and check it and I find that there is a sizable dent in the side of my laptop where the hard drive is, so I open it up the hard drive and the SATA connection are fine and my mac still works so I continue to take it to school when a couple of days ago it completely freezes up and refuses to do anything so I turn it off and wait till I get home and then boot it up and all I get is a white screen so I press command and R. I then get I dialogue saying "INTERNET RECOVERY PLEASE WAIT", I read up on internet recovery and find it means something has gone completely wrong with my system. My hard drive has broke. So I go to school and they give me a small 60 GB hard drive spinning at 3,200 RPM which gave me some time to look for anew hard drive online whilst I could still do work on my laptop. I then find a Seagate 1 TB SSHD for £70 on Amazon so I go for it. Now I have followed all the instructions on how to install the drive which is supposedly Mac compatible I then boot my MacBook Pro up holding command and r it then boots into internet recovery I then go to restore the system through Time Machine Back-Up to then find that the SSHD isn't recognized. So I take it out and put it in my now 12 Year Old Power Mac G5 and in registers fine I then formatted it to Mac OS X Extended Journaled and partition it as GUID Partition Map for Intel Macs. I re-insert it into my MacBook Pro and go through the process again however it is still not showing up.
My Question is...
Am I doing something wrong?
Or
Is it the Solid State Hybrid Drive?
I can't Plug the new hard drive in via a SATA to USB and install Mac OS X Yosemite and my files because the only medium that has all my files on is my External Hard drive for time machine back-up.
Any help would be greatly appreciated

"It also seems a bit backwards since you have to erase a hard drive with nothing on it to format it"
At least you are not erasing anything important!! Always worth reformatting a new HD in my opinion, Apple does not make the HDs so you never know what they may have been formatted as/with/on/by etc... Also if you take time to ZERO out any data (see security options button) you would identify/isolate any bad blocks before you start using (highly recommended). This would lead to far few problems later, as you know for sure you have a sound and working disk! Definitely NOT backwards! Just good sense.

Help With New Hard Drive Installation Recovery

I had a bad hard drive crash. I installed a new one and got the bios to boot from the cd drive, with the windows 7
orginal install cd in the drive. It recognized Drive 0, I clicked new in the options. It created ONE System partition.
Installed windows 7 seemingly fine. Inserted the application and driver recovery disk and installed those. It all seemed fine. This morning I turned it on and it the hard drive error message (3F0) please install an operating system. I shut it down and restarted, it seemed normal. I installed a few programs, shut it down again. Returned to it later, started it up again and it took me to the diagnostic screen telling me SMART Check - Not Installed and Short DST - Not Installed.. Can someone tell me how to delete that partition and I can format the drive in a usb sata enclosure and start over again.
Please tell me the correct proceedure to get this laptop back up and running to a factory state. I have original Windows7 and Windows8 and Application and Driver disks for both OS'es.. I want to stay with the Windows7 installation.
Thanks for any help with this problem. I have no idea where I went wrong !
This question was solved.
View Solution.

It is not impossible that the new hard drive is bad, have seen it before. It is also possible that the sata controller on motherboard is bad-but I would look at that possibilty last. Can you get an exchange on the new hdd?
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

Problems with new hard drive in zen x

Similar Messages

Maybe you are looking for