Problems with new instalation of Photoshop Elements 12

Windows 7
I have had continual problems with PE 9 with error messages to uninstall and reinstall Error 16.
So I thought buy version 12 that should do the trick BUT NO I uninstalled version 9 and installed 12 from disk on the 20th August.
Updated with Application Manager and all was well. Yesterday will not load and Error 16 as before. Tried run as administrator and was told I needed a newer version of Update Manager. Downloaded and installed version 8 still no joy and this then updated to Adobe Creative Cloud. The Application still will not open and I am getting fed up with Adobe applications, when they work their fine but I have no luck getting them to work long term.
Having bought this I am reluctant to move on and incur the cost of an alternative but I am fast running out of patience with Adobe 
Any Hep Would Be Appreciated

Barbara B
Thanks for link. Worked through Windows Vista/7 settings got to Set permissions but no Adobe PCD folder. Uninstalled and reinstalled PE 12 software 5/9, PCD now there and application running OK as was the initial installation.
6/9 on start-up,  Creative Cloud identified update for PE 12, Application Manager appeared and I run update, after, application running OK and Adobe PCD still there. Checked settings and permissions against link document permissions not as suggested but application working so made no changes.Will the application continue to work, that’s the next question, from previous experience with the initial installation and with PE 9, I have my doubts.
If the loss of Adobe PCD is the cause of the problem, what makes it disappear ? 
Les

Similar Messages

  • I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I hav

    Hi
    I have a problem with color prints from photoshop elements 12. The pictures are too light and with strange colors. I have a Canon pixma mg615I0 printer and use mac os X yosemite. The pictures are taken with a coanon eos 550d in the color space sRGB. I have followed adobes recommendations and have tried both letting the printer respektive photoshop manage the colors. But nothing works. I see that there are different opinions about which is best to do so I tried both. I have the latest printer driver installed. Can anyone help me with this?

    Do the following:
    Print a test page from the printer. Perhaps the print head needs cleaning via its maintenance facility.
    Let the printer manage colors, not PSE
    Calibrate the monitor

  • When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm usi

    When attempting to use Lightroom external editor program to edit a photo in Photoshop Elements 10, the photo does not open / appear on photoshop elements screen.  I don't have any problem with this when using Photoshop Elements 6 or Photoshop CS.  I'm using a Mac with Mountain Lion OS.  Any solutions?

    Adobe now hides the editor - what looks like it is not - you want the editor hidden in the support folder - see http://forums.adobe.com/message/3955558#3955558 for details
    LN

  • Having problems trying to install the photoshop elements trial after download?

    After the download was complete I opened the Adobe Photoshop Elements 9 folder and the install icon had a black line running through it. If i double click on it a message comes up stating that its not supported on this architecture. I do not understand as its the Mac version I downloaded and my system meets all the requirements. Can you please advise. Thank you.
    Lee

    There details below are the spec of my mac.
      Model Name:    Power Mac G5
      Model Identifier:    PowerMac7,3
      Processor Name:    PowerPC G5  (3.0)
      Processor Speed:    1.8 GHz
      Number Of CPUs:    2
      L2 Cache (per CPU):    512 KB
      Memory:    3 GB
      Bus Speed:    900 MHz
    Please don't tell me its out dated already when it still runs like a dream.
    Lee
    P.s would you be able to send me a link with a compatable trial download.

  • Problem with plug-ins in Photoshop Elements 10

    I imported plug-ins from CS3 to Photoshop Elements 10 plug-ins folder.  Why do othey not show up in Filters in Photoshop Elements 10?

    Just as a guess... they are not compatible... you need plugins that are compatible with the program you are using, not something written for a different program

  • Problem with music volume in Photoshop Elements 12 slide show

    I'm creating a slide show in Photoshop Elements 12 and want to include several songs.  I'm on Windows 7.  I've worked with the songs in another program, DJ Audio Editor, to make them fade at the end of each clip.  Each is saved as an MP3.   However, when I bring them into the slide show, there's no reduction in volume at the ends of the clips.  The volume stays full and then abruptly cuts off at the end of the clip - exactly what I'm trying to avoid.   Does anyone know why Elements 12 isn't recognizing the fade at the ends of the music clips I've created?

    Just as a guess... they are not compatible... you need plugins that are compatible with the program you are using, not something written for a different program

  • Problem with auto install of Photoshop CS4

    Hello,
    I'v a problem with the installation of Adobe Photoshop CS4 under Windows 7. It's working
    with Windows XP. I've a Exit code: 7 (Unable to complete the silent workflow). I use the
    command Setup.exe --mode=silent or Setup.exe --mode=silent --skipProcessCheck=1 or the same commande
    with de response file but always the same error code.
    Can you help me to resolve my problem ?
    Best regards

    You should probably go to the PS Windows forum with this question...

  • Problem with start up Adobe Photoshop Elements 8

    Tried to start up my Adobe Photoshop Elements 8 on my MacBook Pro running on Maverick 10.9.5  it would not startup and this message popped up!
    Can anyone help?
    I need to use my scanner for scanning and Photoshop Elements to merge the pix together (usually magazines or newspapers for my client's PR Reports).
    Appreciate your help much!

    Hello Barbara,
    I had my Mac rebooted with a roll back to an earlier setting of three weeks back.  But I have been using the Photoshop Elements for ages. And it had been working fine even with Mavericks.
    I gave since downloaded the license repair from Adobe, but I cannot get it to work, as when clicked on the installer app, a window pops up to say that the power pc is no less longer supported!
    Am really stressed as I need to scan and Photomerge the mags and dailies for my clients.
    Hope you can help me out.
    Thanks!
    PETER
    Sent from my iPad4

  • Problem with previously installed trial Photoshop

    Hi!
    I downloaded a trial Photoshop with my private Adobe ID, then a few days later my company got me a Creative Cloud Membership for teams on my work Adobe ID.
    Removed the trial first, then downloaded a new Photoshop using my company Adobe ID.
    Photoshop still think I am running the trial, and give me no option other than entering a license number.
    What can I do?
    Thanks,
    Ole

    Please refer the related post and article:
    http://forums.adobe.com/message/4589055
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    -Harshit yadav

  • New install of Photoshop elements for Mac 6

    I have the downloaded trial version on my new Mac. I now want to install the copy I bought. When I do so the first thing I get is an error message.
    JavaScript Alert
    Critical errors were found in setup Incompatible payload already installed Please see Setup log file for details.
    Can someone help me fix this problem. It is very frustrating.
    Thanks,
    Karen

    You should have run the uninstaller from the download for the trial. At this point, get rid of as much stuff as you can find (don't forget to check hard drive>library>application support), then download and run this:
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402767&sliceId=2
    before trying the retail installer again.

  • Problems with new install of 2.2.1

    Hi - have downloaded the full 2.2.1 zip file and tried the install on a 9.2.0.8 databse on solaris (no previous Apex applied) . It seems to have failed to install, first errors were :
    FLOWS_020200
    ...create flow views
    ...wwv_flow_users view
    where security_group_id = (select nv('FLOW_SECURITY_GROUP_ID') s from dual)
    ERROR at line 2:
    ORA-06575: Package or function NV is in an invalid state
    Later culminating in some nasty looking:
    ERROR at line 1:
    ORA-04068: existing state of packages has been discarded
    ORA-04063: package body "FLOWS_020200.WWV_FLOW" has errors
    ORA-06508: PL/SQL: could not find program unit being called
    Was I mistaken in thinking the full 2.2.1 zip file was a complete installation?

    Hi Sally,
    This is rather interesting. It appears, for whatever reason, that the PL/SQL Web Toolkit is not available in your database. I believe if you solve this problem, all the others will be resolved as well.
    Connect to the database as SYS using SQL*Plus and issue:
    select distinct owner, object_type from dba_objects where object_name = 'HTP'
    If this does not show exactly:
    OWNER     OBJECT_TYPE
    PUBLIC     SYNONYM
    SYS     PACKAGE
    SYS     PACKAGE BODY
    then something is awry with your database. If this query returns no rows, then it may be a simple matter of installing the PL/SQL Web Toolkit (review MetaLink for instructions, but it hopefully is as simple as connecting as SYS and running $ORACLE_HOME/rdbms/admin/owaload.sql).
    Before you attempt to reinstall APEX 2.2.1, make sure you cleanup. Review A.2.2 at:
    http://download-east.oracle.com/docs/cd/B31036_01/doc/install.22/b28552/trouble.htm#sthref138
    I hope this helps.
    Joel

  • Problem with new install of InfoView

    I have recently installed CR2008 Server V1.  I set up a test user and then logged on to InfoView as the test user.  There is an item in the inbox.  When I try to open it, I get this message:
    Status report
    message Invalid path /CrystalReports/view was requested
    description The request sent by the client was syntactically incorrect (Invalid path /CrystalReports/view was requested).
    It appears that not everything has been installed either on the server or on the client. Any assistance would be much appreciated.

    Thanks for the reply.  It was indeed the version of IE.  However, even with IE 8, you have to add the application to the Compatability View Settings under Tools.  I also had to go to preferences in InfoView for Crystal Reports and change it to the option for Web (no download required).  That may not be necessary in all cases depending on what is installed on the machine and how ActiveX is set up.

  • Problem with trial install of photoshop c6

    I receive an error message everytime i try to install photoshop CS6
    it tells me to
    1. restart my computer
    2. Exist firewall and other applications
    3. Relaunch again.
    I have tried this three times. does anyone know how to get this to work? it is almost not worth it.

    We cannot know. You are not giving us the exact error message nor telling us anything about your computer....
    Mylenium

  • Problems with uploading music on Photoshop Elements 11

    When I try to upload a song to a slide show I keep getting this:
    "The selected file cannot be played because your system does not have the required compressor/decompressor (codec) installed" 
    What is this telling me?  What am I doing wrong?

    Check this : http://helpx.adobe.com/creative-suite/kb/error-import-copy-protected-audio.html

  • Having problem with correct color using Photoshop Elements 9 and Hp photosmart c6150.

    Have been trying to print pictures from PSE9 to HP Photosmart C6150 and the colors are overly red and not the same as the original photo.  I tried to get the ICC profile online without any success.  How do I setup my color management on PSE9 and my C6150 to get the best pictures.  I am using HP Premium Plus Photot Paper.

    Delete the editor's preferences: quit it, then restart it (use the button in the welcome screen or organizer) while holding down ctrl+alt+shift. Keep the keys down till you see a window asking if you want to delete the settings file. You do.

Maybe you are looking for