Problems with new upgrade

Is anyone having problems with the new IOS 6 upgrade. I couldn't log into my iTunes account and the maps app, which I use loads is now rubbish! Can it be uninstalled without losing everything I've put on the iPad since purchase.

It is not possible to uninstall or downgrade iOS 6.

Similar Messages

  • Found a problem with new upgrade

    Hello everyone,
    I did find something not so nice about the new upgrade. I had installed a template that I purchased from 11mystics. The template is no longer accessible through the template chooser. I tried both ways either in iweb clicking on templates or at start a new site. I looked in the folders where they were installed and all the files are in their respective place. the template itself in the theme folder and the thumbnail in the thumbnail folder. I remove them and reinstalled. I repaired permission, I erased the plist. all to no avail template still not available.
    I do not know what to think. I cannot beleive that Apple would prevent us from using 3rd party templates?
    Your opinion or advice please.
    Thank you
    Mireille

    Tony, this seems to be a bug in 3.2.3, see this thread saving from photoshop
    Regards
    Léonie

  • WoW Cedega/Wine problems with new upgrade

    Greetings.
    World of Warcraft had been running perfectly on Cedega in ArchLinux, but Yesterday (Oct 29) I upgraded my system, and now WoW crash in game, and not error message is displayed, only the game freezes.
    Also Thunar says libdbus-1.so.2 not found, i looked for it and I found libdbus-1.so.3, I linked it to libdbus-1.so.2 but it did not work.
    Any solution?
    P.D. Sorry for my bad english.

    You can try using WoW repair tool, but I'm unsure if it works on Linux http://www.blizzard.com/support/wow/?id=aww01669p
    Some people suggest to reinstall WoW in wine... First you delete evrything in /home/username/.wine and than run winecfg
    There are also some suggestions to delete everything in the folders WDB and WTF
    Hope that helps... And I have absolutely no idea why does this happen after update...

  • Problems with auto upgrade Anyconnect 3.1

    Hello,
    I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
    Here is the situation :
    I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
    Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
    If I configure client software back to 2.5 on ASA, it works again for every client.
    Do you have an idea ?
    Thanks for your reply.
    Yann

    I have seen the same behavior on Mac OS X. A couple of points for me:
    If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
    My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
    Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

  • Problems with new catalyst

    I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
    This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
    With cat 4.6 and the drivers before everything works fine.
    I tried fastwrites on/off(no good)
    Disable Vpu recover(no good)
    Raise agp voltage to 1.6V(no good)
    I also tried asus own driver but the same thing happens.
    However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
    I hope someone have an answer to my mysterious problem

    Quote
    Originally posted by Ycore
    This is my exact problem.  Computer has been running ROCK solid for the last few months with 4.7 catalysts.  I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated.  Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings).  At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
    At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d..  I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
    QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
    AMD 64 3200+
    K8T-NEO
    Antec 430W PSU
    ATI RADEON 9600 PRO AGP
    SB LIVE
    1GB CORSAIR C2 DDR (2x512)
    Lite-ON DVD/CD+RW
    Windows XP SP2
    I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
    Also note that we have very similar setup's so try it and let us know if that works out for you.

  • Problem with new version 4.3.2 apps not working " after update to the new version "

    Problem with new version 4.3.2 apps not working " after update to the new version "
    i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

    Hi There
    Had the same problem as you. App would terminate when launched.
    Solution to working You Tube app:
    -Go to playstore
    - Uninstall app (it doesn't remove the app, only removes the update)
    - "Et Voila", working again.
    This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
    Hope it helped.
    Best Regards

  • I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

    I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
    Will you please help me in this regard?
    Another issue, since i bought my new iphone there is dust inside back main camera.
    Your advises are highly appreciated.

    Hey Shaiju isac,
    I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
    iPhone: Troubleshooting a cellular data connection
    http://support.apple.com/kb/ts3780
    Cheers,
    David

  • Wifi problems with new ipad

    I'm trying to learn how to correct wifi problems with new iPad.  It is the wifi only, 64GB model.  I want to be able to use it at work, where we have a great wifi network.  I can usually connect to our network with no problem, but after an hour or so my iPad loses the network.  When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network.  My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
    At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi. 
    I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question.  I can't think of any other methods that are available to an end user to correct the problem. 
    I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms. 
    Can anyone offer any advice here?  This is quite frustrating.

    No problem! Have a read at this most interesting article which has special significance as regards your models!
    http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
    However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
    created by Texas Mac Man in Using iPad - View the full discussion
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
     Cheers, Tom ;)

  • List of Problems with new Web Mail

    List of Problems with NEW Web Mail :
    - At first doesn't open full page message list or retain full page as default setting, have to drag down bar
    - Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down.  It should show at least 26, preferably all available
    - After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
    - Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
    - There is a drop down to select which folder to move a selected email to.  The initial display shows 7 usable choices, with the usual slider and arrow to show more choices.  The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear.  I can't move the selected field with arrow keys either.  I can select any of the visible 7 choices, and move an email to only one of the 7.  NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser.  Webmail should be FULLY web standard.
    - Occasionally a message will move from inbox to trash, without NO indication or command to move them.
    - Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear.  No time to read the error message either.
    - No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same.  Very unclear.
    - How can I switch my service back to the original, basic, email which works ok?  I know it’s still there, since some of my other accounts still access it!!!
    This seems my only way of getting this info direclty to the programming staff.  If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!  
    Thanks!

    vz_ric wrote:
    The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
    Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

    Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

    What is your technical support question for these user to user technical support forums?

  • I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

    I want to upgrade from Tiger to Snow Leopard on my 2008 MacPro. How do I avoid problems with the upgrade process?

    #1 Do a complete bootable backup of your drive before upgrading. That way should anything happen you can revert back to the start and try again.
    Make sure you meet Snow Leopard 10.6 Technical Requirements - http://support.apple.com/kb/SP575
    You might also want to make sure you don't have software issues with SL:
    A Mac OS X 10.6 Snow Leopard Application Compatibility List - http://snowleopard.wikidot.com/

  • When Apple solve problems with new iTunes calendar sync with windows and outlook?

    When Apple solve problems with new iTunes calendar sync with windows and outlook?

    Anything Downloaded with a Particular Apple ID is tied to that Apple ID and Cannot be Merged or Transferred to a Different Apple ID
    More Info here...
    Apple ID FAQs  >  http://support.apple.com/kb/HT5622
    If necessary...
    Contact iTunes Customer Service and request assistance
    Use this Link  >  Apple  Support  iTunes Store  Contact

  • Before I buy has there been any problems with new 27 iMacs?

    Before I spend my hard earned cash does anyone know if there has been any problems with new 27 iMacs?

    Hello richard from Folsom:
    Are you inside or outside?  (  I could not resist, I lived in Sactown).
    Anyway, advice is frequently worth what you pay for it, and mine is free.
    If you want it, buy it.  The posts above are right on the mark (except waiting is probably overly-cautious).  The best advice (from anamusic) is to buy the extended warranty - well worth the money.
    Barry 

  • I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.

    I just started using my iphone 5s. I have a problem with new incoming emails from my POP account. Why are they marked as read automatically even though I have not even opened them yet.
    At first I thought it might be because I was using simultaneously my old iPhone 4S so it somehow realized the emails where being pushed to another device and the it marked as read, this has nothing to do since I have deleted the email account from the iPhone 4S

    Contact the email provider for assistance with their service.

Maybe you are looking for