Problems With News Video Clips?????????

In the past I have been able to watch news video clips on Fox and CNN. For some reason I can not determine, I can no longer do it.
When I click on the video clip news story, the player pops up but the video does not load and play. I can not think of anything I have changed on my puter that would cause this.
I use a G4, OSX 10.3.9, and my internet is with Direcway.
Can someone please help me?
Thanks, John

Well, it seems as thought the QuickTime Player is working on CNN News Videos, but I still can not get the Free Video player to work on Fox News.
All suggestions would be welcome. Thanks
John

Similar Messages

Problem with splitting video clip

Often when I split a video clip at the playhead, delete the clip fragment I don't want, iMovie will end up regenerating the entire original clip placing it immediately after the split and shortened version. Quite annoying as I don't always scroll and look for the duplicate. Therefore I end up with the desired shortened clip followed by the longer original. I know how to crop but sometimes I prefer to split and delete one of the split clip fragments. Any idea of what is going on

When iMovie is acting oddly, doing the following items of basic maintenance often cures the problem:
1. Close iMovie and trash the file named com.apple.iMovie.plist found in User/Library/Preferences. iMovie will create a new .plist file on relaunch.
2. Do a permissions repair, using the Utilities/Disk Utility app on your Mac.
3. Update your iLife programs, particularly Quicktime, and do a permissions repair afterwards.
Additionally, make sure that you have sufficient free disk space, about 15GB, but more is better. Then, if you have any 3rd party plug-ins, particularly Quicktime, disable them temporarily by moving them to a different folder.
Items 1 and 2 alone often solve the problem, and they are easy to do.

Problems with saving video clips

Ok here is what I'm looking to do. I'm working on a project containin over 15 hours of raw video spread. Can I capture one full hour of video, go into FCE and pick the individual clips from that one hour that I want, and delete the other unused video without messing with the clips I saved? If so, how do you go about doing this.

Whatever you capture, FCE saves. In other words, if you capture an hour of video and only use 10 minutes in your Timeline, FCE still wants to reference that entire hour. Delete the rest of the video and you will loose the reference and the project will not work.
You can always use Capture Clip to set In and Out points in your raw video, thusly capturing just what you need. FCE does not have batch capture, so you will have to capture one clip at a time but this will save you space.
Be sure to properly log your tapes (Reel 1, Reel 2, etc) in case you need to recapture the project later on
There are alternatives: You can capture one tape at a time, go in, "cut out" the clips you want, saving them to a new Sequence. When you have the clips you want, you can export that Sequence as a self-contained Quicktime movie then ditch the original tape. However, I think Capturing Clip is the more desired approach

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

How can I keep my audio track, delete a short segment of video, and reinsert a new video clip, without changing the audio with the way it lines up with the original video?

If you have either iMovie 09 or iMovie 11 you can do this easily using the Cutaway feature.
Go to iMovie/Preferences and make sure that the Advanced Tools are enabled.
Now you jut drag and drop the 2nd clip onto hte first clip at the frame where you want the Cutaway to start. A popup menu will appear. Choose Cutaway.
Here is a good Tutorial.
If you have iMovie 08, let me know. There is a way to do it, but it is more complex.

Memory leak problems with loading videos over and over.

I'm having memory leak problems with loading videos into a VideoPlayer aswell as FLVPlayback.
What the flash should do:
- Should be running for 7 days without having to restart the projector.
- Interface that shows people around a 360 3D model with 5 different parts and at the stops it makes during the rotation you can click to zoom in on a location which plays a movie for that aswell.
- Shows a video out of 5 parts for a 360 rotation in 3D in mp4 video (added each time and cleaned up, see code below).
- Still images are used when the video clips are done playing (MovieClip in stage).
- Should run automatically when there is no user interaction for X minutes.
What the problem is:
- The flash (as a exe and swf i guess) starts to consume memory over time (say 10 hours) until the projector crashes. This usually at around 1.75 GB of memory.
I cannot see why the Flash cannot garbage collect this and free up the memory. Mabye there is something I don't understand about the garbage collection in flash?
Here is some code from the video loading and playing:
var fVideo:VideoPlayer;
VideoCreate();
function VideoReady(pEvent:VideoEvent):void
trace("VideoReady()");
     // start playing video
fVideo.play();
function VideoLoad(pUrl:String):void
     trace("VideoLoad(" + pUrl +
     VideoCreate();
     if (pUrl != "")
          if (fVideoFolder + pUrl == fVideo.source)
               fVideo.seek(0);
VideoReady(null);
          } else {
trace(fVideo.state);
               if (fVideo.state !=
VideoState.DISCONNECTED) fVideo.stop();
fVideo.close();
fVideo.load(fVideoFolder + pUrl);
     } else {
// error no url
function VideoCreate():void
     trace("VideoCreate()");
     // remove old one
     if (getChildAt(0) == fVideo)
          removeChildAt(0);
     fVideo = new
VideoPlayer(1024, 768);
     addChildAt(fVideo, 0);
     fVideo.autoRewind = false;
fVideo.addEventListener(VideoEvent.COMPLETE, VideoDonePlaying);
fVideo.addEventListener(VideoEvent.READY, VideoReady);

Hmm. It's in connection with Dropbox. Så apparantly you can only use one of the two at the same time if you want the programs integrated in Finder.

Problem with sync video and audio

Hi
Problem with sync video and audio
1- capture video ( Telecinema dv pal)
2- conform 25 to 24
3- import timeline audio and video
4- sync
5- Link
6- make sub-clip
7- new name
---- error
Sequence Error: Unable to add clip to sequence.
Possible media limits problem in clip or sequence.
FINAL CUT PRO IS DONE.
HELP ME.
THX

exactly why are you converting 25 to 24?

Itunes 7.0.1 still has major problems with jerky video

I thought the newest update to Itunes 7 would fix my problems with jerky video that have begun since this Itunes 7 came out. At first I thought maybe my computer was too old (powerbook 12" 1.5 Ghz, with maxed out RAM) to play the new resolution, but then I realized that even my old TV shows had jerky playback. It doesn't seem to matter what size. The audio works fine, but the video freezes every few seconds. This is not really acceptable and I'm thinking about uninstalling Itunes 7 until apple issues a fix that address this video playback issue. Anyone have any suggestions or heard anything? Thanks!
- Tpetdoctor

I located the problem of the jerky (1 to 2 frames per second) video that started after updating to iTunes7 and 7.0.1!
Dragging (copying) the file "ATIRadeon9700GLDriver.bundle" from system/library/extensions/ to the desktop and deleting it from the extensions folder (or else simply deleting it and then dragging it from the trash to the desktop) returns normal smooth video to non-H.264 mpeg video on my second generation iMac (ATI Radeon 9600). Unfortunately, this also makes Coverflow stop working with the message "iTunes is unable to browse album covers on this computer". I'm not sure what else will be disabled by moving this file.
Obviously, this is not a solution, or even a feasible workaround. Where can I get a "good" ATI driver? I went to the ATI site "https://support.ati.com/ics/support/default.asp?deptID=894&task=knowledge&fold erID=27" and tried installing "macosx-ati-displays-4-5-7.dmg", but to no avail.

Sound/audio is off for news/video clips Mac Pro , ML

sound/audio is off for news/video clips Mac Pro , ML

>certain clips
What ARE those clips?
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project

Having PROBLEM with playing videos on my 5800

Hi all,
I bought my nokia 5800 2 days ago, and i am havig a problem with my videos.
When i try to play a video (MP4) SOMETIMES it plays it without a problem, but SOMETIMES it plays a black screen with sound. And the most strange thing is it can play a video and in few hours it will just play sound on the same video!!
Please try to help..

pavilion_alex wrote:
phones like 5800 and other similar must be updated because a new update solves the existing problems on the device.
download and install this http://www.nokia.co.uk/get-support-and-software/download-software/device-software-update/download and carefully read the instructions it gives you before the update.
...Or return the phone and replace it with something from another manufacturer that either A) works out of the box, or B) doesn't require such an awkward and painful update procedure. Nokia seem incapable of either.
Message Edited by garnett on 26-Oct-2009 12:49 PM

Premiere Elements 13 , Problems with new text/titles

Premiere Elements 13, bisher keine Probleme. Nachdem die Filmlänge etwa 15 Minuten beträgt immer größere Probleme Titel/texte einzugeben. Wartezeiten sind extrem lange oder Programm stürzt ganz ab.

High ATR,
Computer running on Widows 7 ,64 Bit System, Service Pack 1, Processor AMD Phenom(tm) X4 945 3.00 Ghz;RAM 8 GB
Grafikkarte: NVIDIA GeForce 8800 GT
If the video on the timeline is longer than 10 minutes the problem will be remarkable. The response times adding a title is getting longer(2-15 seconds).
As the video is now 18 minutes the response time is after each action(resizing of letters or any changes of the text) up to 30 seconds or the program crashes completely.
Project settings are the following:
General HD 1080i; 29,97frames/second; Video:1920v 1080 H, 30 fps
Video: maximale Bittiefe, Dateiformat i-frame only mpeg, Kompressor MPRG i-Frame, Standbilder optimieren
The video is a mixture of full HD videos 1920x 1080 .mov and pictures up to 4608x3456 pixels.
When the program crashes I remarked that the main memory RAM(8Gb) was fully used by the premiere program. Might there be a problem?
Thank you for your service.
thomasd
Von: A.T. Romano
Gesendet: Sonntag, 1. Februar 2015 23:55
An: Thomas Deschler
Betreff: Premiere Elements 13 , Problems with new text/titles
Premiere Elements 13 , Problems with new text/titles
created by A.T. Romano <https://forums.adobe.com/people/A.T.+Romano> in Premiere Elements - View the full discussion <https://forums.adobe.com/message/7151822#7151822>

Facebook problems with new macbook pro.

Facebook problems with new macbook pro. I can't publish photo albums to timeline. I can't share items onto timeline. Photos I'm tagged in don't appear on my timeline. Any help?

Yes! Been living in a hellish nightmare since Sept-Oct. Unlike you, however, Apple has been of no help. They say the iPad is unhackable, plist and crash reports are none of my business and who understands them anyway, their route tracing apps are probably not reliable. The best they could do was wipe the iPad clean. Lost photos they said would be in the cloud....
Almost immediately was back in somebody's VPN, their remote controller, video, audio, working. Got the purple buddy for the first time today. I have been invaded, my iPad no longer feels like my own, I have lost thanksgiving, Christmas, new year trying to track down the invaders, signed up for a Cisco course, set/reset passwords.
I don't know who else to contact... Or what next to do.
I've read similar frustration in other posts, scattered around the support communities. Yours is the only one that has worked toward a solution.
How did you get anyone at apple to look at your logs and acknowledge there is a problem?
Would be happy for a suggestion on how to proceed. Already been the apple store genius and tech on phone route.

Problems with new catalyst

I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
With cat 4.6 and the drivers before everything works fine.
I tried fastwrites on/off(no good)
Disable Vpu recover(no good)
Raise agp voltage to 1.6V(no good)
I also tried asus own driver but the same thing happens.
However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
I hope someone have an answer to my mysterious problem

Quote
Originally posted by Ycore
This is my exact problem. Computer has been running ROCK solid for the last few months with 4.7 catalysts. I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated. Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings). At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d.. I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
AMD 64 3200+
K8T-NEO
Antec 430W PSU
ATI RADEON 9600 PRO AGP
SB LIVE
1GB CORSAIR C2 DDR (2x512)
Lite-ON DVD/CD+RW
Windows XP SP2
I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
Also note that we have very similar setup's so try it and let us know if that works out for you.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

Problems With News Video Clips?????????

Similar Messages

Maybe you are looking for