Problems with Nikon Coolpix P7700 and Lightroom 4.4 with camera raw 7.4.

When I import raw (NRW) files (size 3000 x 4000 pixels) from my Nikon Coolpix P7700 to Lightroom 4.4 (camera raw 7.4) it seems that Lightroom doubles file sizes. In Metadata section I can see that picture´s file size is 25.xx Mb. Camera´s sensor size is, however, only 12 Mb. I have also Nikon D300 and imported raw files (size 3000 x 4000 pixels) in Lightroom 4.4. are varying between 12.xx and 16.xx Mb. I´m very confused about the situation. I have iMac 27" (late 2007) and operating system is Mac OSX 10.8.4. Can somebody explain what is happening. Is there a bug in Lightroom 4.4 and Camera Raw 7.4 or what?
Thank you in advance
Eero

You are mixing megapixels (your camera takes 12 megapixel photos) with megabytes (the file size). These two different units cannot be compared, and I conclude from the numbers you have provided that nothing is wrong.

Similar Messages

PSE 10 from Apple Store problem with camera raw 6.7 upgrade

PSE 9 was not opening Nikon d4 raw files so I've purchased PSE 10 at the Apple Store and installed on my Mac. PSE 10 is still not opening d4 raw files (camera raw 6.5). I tried to update to 6.7 taken from Adobe but did not succeed to install it. Could you please advice what to do?

Thanks for your help. It works !!!
Bartek A
Wiadomość napisana przez Barbara B. w dniu 17 maj 2012, o godz. 00:34:
Re: PSE 10 from Apple Store problem with camera raw 6.7 upgrade
created by Barbara B. in Photoshop Elements - View the full discussion
You will have to do the update manually for the app store version. Instructions are here:
http://forums.adobe.com/message/4106477
(that's for 6.6 but the steps/file paths are the same for 6.7)
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4414265#4414265
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4414265#4414265. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problems with Camera Raw 6.7 after upgrading to OS 10.8

I've been using Photoshop CS 5 with Camera Raw 6.7 on my MacBook Pro with no issues until I recently upgraded to OS 10.8. Now my Canon CR2 files (shot with a Canon G15) won't open. Does anyone know of a solution or work-around for this problem?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Problem with Camera Raw

I am using Photoshop CS6 v 13.0.1 x64. I have been using Photoshop for years, of course various versions. All updates have been installed. My OS is Windows 7 Pro X64 with all applicable updates. I just downloaded NEF files from my D2X and was opening them in Camera Raw. I then selected similar NEFs and clicked Synchronmize but nothing happened. No error message, nothing! This never happened before. I have 24 G RAM, plenty of free space on the C drive (334Gs). I.have the OnOne plug in installed and may have added some free presets lately.
I used to download pix from my cameras and never encountered this problem before.
No changes were made to the system that I am aware of.
What is going on? How do I fix this?

PSE version?

Problem with Camera Raw update in Elements 11

I need to update the raw plug-in in elements 11, but when I go to the update section, I just keep getting an error message (which says server busy or might be prevented by firewall). I suspect that my firewall is stopping the updates, but I don't know how to over-ride this. Can anyone explain it please? (I have managed to 'allow' certain things on the firewall, but for this update, I don't know what I'm looking for to 'allow'!

I know nothing about Photoshop Elements. But, according to this list, Photoshop Elements can only work with Camera Raw through version 8.0.
Camera Raw-compatible Adobe applications

Problem with camera raw for Sony 350K and PSE 6

I have recently tried to download my first batch of RAW pictures taken with a Sony A350K camera into PSE6 but I am told the format is not recognised. I thought I had successfully down loaded ACR 4.6 but apparently not as they are still not recognised. Can anyone throw any light on what I might be doing wrong?

If you have left the old version of Camera Raw.8bi in the folder, even if you have renamed it, Photoshop will still use it.
Follow this link:-
http://kb2.adobe.com/cps/402/kb402444.html
and scroll down to the section on installing the plugin in PSE 6.

Problem with Camera Raw update

Downloaded Camera Raw 6.2 update. When attempting to install it I get a message saying I need a new copy of Adobe Application Manager. I can't find such a download anywhere on the site. A search turns up nothing called "Application Manager". Is anyone else experiencing this problem?

Adobe Application Manager appears to be how Adobe checks serial number and manages free trial periods. If you go to your boot drive and open Library > Application Support > Adobe > OOBE > PDApp > core you should find Adobe Application Manager. If you have moved files, deleted files or whatever things might not be where they should. I'd probably reinstall PS CS5 which should reinstall Application Manager if it's not there.

I have a Nikon Coolpix P510 and with Picasa I am not able to view videos or continous photos. Before I purchase Adobe Lightroom I want to know if I am able to view those features?

I have a Nikon Coolpix P510 and with Picasa I am not able to view videos or continous photos. Before I purchase Adobe Lightroom I want to know if I am able to view those features?

The best thing to do is download the trial of Lightroom and see if it works for you. The trial is the complete program. The only thing different about the trial is that it expires after thirty days. Your images stay in the folders you already have so there's little risk. Good luck!

Is the Fujifilm X100T compatible with Camera Raw and Lightroom?

Is the Fujifilm X100T compatible with Camera Raw and Lightroom?
I see that the X100 and the X100s are compatible. Nothing about the T model.

https://forums.adobe.com/search.jspa?q=x100t&place=%2Fplaces%2F1383621&depth=ALL

Problem with recognition raw files from nikon d600

hello everyone, i hope someone can answer my question.
using cs5 with camera raw . camera raw is not able to open my nef files from my new nikon d600 . what can i do to update the plugin??
from the menu help updates in cs5 it tells me that all soft. is updated but it is still not working

You need to upgrade to PS CS6 in order to work with D600 raw files. Else, you can convert your raw files to DNG using DNG Converter.
For more details, check
http://helpx.adobe.com/creative-suite/kb/camera-raw-plug-supported-cameras.html
DNG Converter: http://www.adobe.com/products/photoshop/extend.displayTab2.html
[Moved the discussion to Photoshop Forum]

When will Lightroom be updated with camera raw 8.7?

Hi Folks,
Can anyone tell me when LR will be updated with camera raw 8.7, containing support for the new Nikon D750 camera?
Many thanks for any feedback

Until you convert to DNG you wont be able to import the 750 NEFs into Lightroom.
As I am a Windows user I'm not sure what you mean about Command R but to use the DNG convertor you need to download from the link and install it.
Then you start up the convertor as a separate application and you will see the following panel:
Then choose the Images to Convert
Select a location to save the converted images (defaults to the same location as the input images)
Rename the images if you so wish (Default is just to creat a file of the same name with DNG extension)
Then Convert and after the conversion you will be able to import the DNG files into Lightroom 5.6
Then it doesn't matter if you have Camera RAW 8.7 in CS6 as they will open directly from LR to CS6 as you would normally do.
I guess it is a little inconvenient because you have an additional step to convert the NEF to DNG but it at least get you there in the meantime while you are waiting for the final LR product.
Enjoy!

Problem opening photos with camera raw 7.1 with Photoshop CS6

I am using Windows 7 32 bit system with 4GB ram and graphics accelerator.
I have Photoshop CS5.1 installed in the same system at it works perfectly.
What happens is when I use the B+W function, I get an error message saying that I have not enough ram.
After that, when I open the next photo with Camera Raw, the raw image will not open.
I have already maximised the Ram that Photoshop can use to 1.7GB and there is more than enough space in my scratch disk.
Anyone can tell me what the problem is?

Hi Noel,
Thanks for your reply.
Just to clarify.
I applied B+W layer adjustment on my photos. It is part of an automated set of actions which I apply to all my photos. I adjust the B&W layer to 50% overlay. When I click on the B&W adjustment layer, there is an error message that tells me I have not enough ram. Once that happens, when I open the next photo in raw, I don't see the new photo but only the frame of the camera raw though which I see my photoshop desktop.
It doesn't occur with the first few photos. But by the 3rd or 4th it happens.
I will adjust it to 50% and see what happens.
Leslie

Pentax K-x calibration with Camera Raw 3.1, and calibration updates

The Pentax K-x will save its raw files in either DNG (Adobe) format, or PEF (Pentax) format. Until Camera Raw 3.1 was released, I had my K-x writing DNG files, since there was no support in Apperture for PEF files. With Camera Raw 3.1, the K-x is now explicitly included, so that I could switch to PEF format.
My initial sense after doing that was that the PEF files were coming in darker than the DNG files had. But when I switched back to DNG, those were darker than I thought they should be, too. Since I had DNG files that had been processed with Camera Raw 3.0, I went back and made new versions, processing those with Camera Raw 3.1. Those, too, were much darker than the same files processed with the earlier raw developer. For examples, this picture is from a K-x DNG master processed with Camera Raw 3.0, while this picture is from the same master, reprocessed with Camera Raw 3.1. I've embedded the histograms shown in the inspector in each. Each of those has no adjustments applied. The JPEG image produced in camera (I shoot Raw+JPEG) is much closer to the brighter 3.0 image than the darker 3.1 image.
I've seen one other report of similar behaviour with K-x images in here, but that took the approach that the solution was to revert to Camera Raw 3.0, for now, at least. I hate to move backward, particularly if it locks me out of any future updates. So, does Apple have a history of recalibrating cameras that they've already released Raw support for? Might this change in a future Camera Raw update, or is this likely to be what they alway render for the K-x?
I can get the new style images looking okay (in fact, they seem to have better noise characteristics) with a good deal of adjustment, but not if I confine my adjustments to the Raw Processing brick. There, Boost and Hue Boost are both maxxed out by default, already. If I add adjustments in the exposure brick, and maybe a few others, I can probably get a general set of adjustments that will work as a default for this camera, but how common is it to have to do that?

Aperture 3 mostly seems to work fine for me, at the moment. There were some issues with importing my iPhoto Library that I've mostly worked out, and some quirks that were fixed by the 3.0.1 update. I'm not saying it's all better, but it's not the doom that one might imagine reading some of the threads here, either.
I only had the trial version of Aperture 2, though. I only got the K-x in late December, and before that, I had no need for raw processing. The software Pentax supplies is UGLY, though, and iPhoto wasn't cutting it, so I tried the Aperture 2 trial and the Lightroom 3 beta. I concluded that I much preferred Aperture to Lightroom, but I wasn't going to buy Aperture 2 when all the speculation was that Aperture 3 was right around the corner, or not coming at all. Since my Aperture 2 trial had run out, it wasn't a hard choice to buy Aperture 3 as soon as it came out. I do find I use the editing brushes more than I imagined I would, and I'm very happy that it now directly supports my camera - I've switched to shooting PEF raw instead of DNG raw.

When is camera raw going to support the Nikon D810? I have downloaded the beta version and I can open in camera raw but it not open in PS.

When is camera raw going to support the Nikon D810? I have downloaded the beta version and I can open in camera raw but it not open in PS.

We have just released the final versions of ACR 8.6 and also Lightroom 5.6 tonight. You can now open all your NEF files from Nikon D810 in both applications.
Camera Raw 8.6 and DNG Converter 8.6 Now Available

Problem loading large DNG images with Camera RAW!

Hello,
When loading large DNGs with Camera RAW 4.4 (for example, DNG dimensions are 9984x6656) CS3 says "cannot open the image because this is not a right kind of a document". EXACTLY THE SAME file is loaded without a problem using Camera RAW 3.7 and 4.0 (did not test other versions). Have you specially prevented loading of large files? Wouldn't it be better to provide this as an option? It's a real disappointment - new version of plugin CANNOT do the thing that older versions CAN. (Simply using older version is not an option, as I need to load RAWs from new cameras, like Canon 450D).
Dear Adobe, please correct this problem :)

It might be wise to give some insight like how the DNG was created, by what version of what software, if ACR is hosted in Photoshop or Bridge... What platform you are using, how much RAM, memory allocation, etc.

Problems with Nikon Coolpix P7700 and Lightroom 4.4 with camera raw 7.4.

Similar Messages

Maybe you are looking for