Problems with non-electable client

Hello!
I am not sure if this forum is the right place to submit feedback, but since I have not find another places I will try to do it here. If anybody knows more appropriate way, please let me know.
I am setting up the replication environment with two nodes: master and client (I am using Java API for db 4.5.20). I don't want automatic failover to occur, so I set the replication priorities to 100 on master and 0 on client. Unfortunatelly, it did not result in the setup I was expecting - after master's failure the client became a master. After debugging the application I found out that it is impossible to set replication priority to 0.
Code analysis shown the following problem: in method configureEnvironment() of the class com.sleepycat.db.EnvironmentConfig there is the following construction:
if (replicationPriority != oldConfig.replicationPriority)
dbenv.rep_set_priority(replicationPriority);
since default value for replicationPriority variable is 0, dbenv.rep_set_priority(replicationPriority) method is not called. On the other hand, in the C code the default replication priority is set to 100 (repmgr/repmgr_method.c, function __repmgr_dbenv_create). Thus, call to environmentConfig.setReplicationPriority(0) does not change default value specified in C.
I have patched the com.sleepycat.db.EnvironmentConfig class and removed this check. This way I have managed to set replication priority to 0. Unfortunatelly, I got one more problem - client kept becoming master eventhough its priority was set to 0. After debugging the replication sources I discovered the following problem:
In function __repmgr_elect_main (file repmgr/repmgr_elect.c) there is a code that supresses election in case of election caused by failure recovery if the only other site in the group is lost. This makes sense, as the only site the can become a master is the local one, but there is no check for non-zero priority there.

Yes, this is a bug. (Two bugs, actually.)
I believe a preferable fix in the Java side would be for EnvironmentConfig to get the correct default value, one way or another, rather than removing the check.
And, indeed it would be better for repmgr to check the local priority before assuming it could make itself master in this case.
Alan Bram
Oracle

Similar Messages

Problem with non-interactive client's installation

Hi,
I'm trying to install Oracle 9i's client in Non-Interactive mode. I have modified clientcustom.rsp and netca.rsp modifying same parameters but the installation doesn't work.
The client is installed but netca never appears. I realized Network's utilities aren't installed in the client's installation process.
Here is my clientcustom.rsp:
[General]
RESPONSEFILE_VERSION=1.7.0
[SESSION]
ORACLE_HOME=C:\oracle\ora92
ORACLE_HOME_NAME=OraHome92
TOPLEVEL_COMPONENT={"oracle.client","9.2.0.1.0"}
DEINSTALL_LIST=<"oracle.client","9.2.0.1.0">
SHOW_SPLASH_SCREEN=false
SHOW_WELCOME_PAGE=false
SHOW_COMPONENT_LOCATIONS_PAGE=false
SHOW_CUSTOM_TREE_PAGE=false
SHOW_SUMMARY_PAGE=true
SHOW_INSTALL_PROGRESS_PAGE=true
SHOW_REQUIRED_CONFIG_TOOL_PAGE=true
SHOW_OPTIONAL_CONFIG_TOOL_PAGE=false
SHOW_RELEASE_NOTES=false
SHOW_ROOTSH_CONFIRMATION=true
SHOW_END_SESSION_PAGE=false
SHOW_EXIT_CONFIRMATION=false
NEXT_SESSION=false
NEXT_SESSION_ON_FAIL=false
SHOW_DEINSTALL_CONFIRMATION=true
SHOW_DEINSTALL_PROGRESS=true
# End of GENERAL SESSION section
# Oracle9i Client
[oracle.client_9.2.0.1.0]
COMPONENT_LANGUAGES={"en,es"}
INSTALL_TYPE="Custom"
DEPENDENCY_LIST={"oracle.winprod", "9.2.0.1.0"}
# Oracle Net Configuration Assistant
[oracle.networking.netca_9.2.0.1.0]
OPTIONAL_CONFIG_TOOLS={"netca"}
s_responseFileName="d:\installClient\my_netca.rsp"
And netca.rsp:
[GENERAL]
RESPONSEFILE_VERSION="9.2"
CREATE_TYPE= "CUSTOM"
[oracle.net.ca]
INSTALLED_COMPONENTS={"server","net8","javavm"}
INSTALL_TYPE=""typical""
LISTENER_NUMBER=1
LISTENER_NAMES={"LISTENER"}
LISTENER_PROTOCOLS={"TCP;1521"}
LISTENER_START=""LISTENER""
NAMING_METHODS={"TNSNAMES","ONAMES","HOSTNAME"}
NSN_NUMBER=1
NSN_NAMES={"MYTNS"}
NSN_DBVERSION={"80"}
NSN_SERVICE_OR_SID = {"MYSERVICE"}
NSN_PROTOCOLS={"TCP;DBSERVER;1521"}
I don't know what I'm doing wrong. If someone knows any useful web about this topic, he could give that information.
Regards.

I've been researching a bit further on the forum. From what I understand, with Adobe Reader 7 and onwards the 'bUI: false' statement is no longer a trusted function.
There has been suggestions to create a folder level script file that specifies this as a trusted function, however in my company this is not practical. This email function will be used in a form used across the globe by hundreds of our users. Therefore a local script (.js) file is not suitable in this instance.
Is it not possible to code this within the button script itself, rather than using a seperate .js file.
Any help would be greatly appreciated. Thanks.

[SOLVED!] On USB drives, problems with non-English chars and HAL

Hello,
I am having a problem with non-English caracters (áãàçéẽê...) on files stored on my USB drive.
On Windows they're created with the correct name. But on Linux the files have the non-English characteres replaced by '?' and are not accessible.
If I manuallly mount the drives using 'mount -o iocharset=utf8 /dev/sdb1 /media/usbdisk' the characters are OK, so I think I just need to get HAL to pass the correct parameters to mount. However I don't know how to do that, and haven't found any good solution.
I tried to build a custom kernel setting the default charset as UTF-8 and it didn't work.
Any ideas? I'm using x86-64, HAL 0.5.13-3 and my locale is pt-BR.UTF-8.
Thanks!
EDIT: Actually, this is not a HAL problem, but a problem with 'exo'. For the solution, I edited /etc/xdg/xfce4/mount.rc and added iocharset=utf8 to the [vfat] category.
Last edited by Renan Birck (2009-11-28 20:54:23)

I don't use Thunar presently, but I looked in the Thunar Volume Manager doc and I didn't find anything to change the mount options of removable drives. I am not quite sure if it's possible or not. Maybe someone using it can tell for sure.
But if it is not possible to change the mount options, a possible solution is to disable the Thunar Volume Manager plugin and to use something else more configurable to manage the automount function.
Personally I use the halevt package from AUR which uses configuration files in the xml format.
It's not so easy to use but is highly configurable.
But there exists other tools also.
I can help you with halevt if you choose that way...

Problems with non-ASCII characters on Linux Unit Test Import

I found a problem with non-ASCII characters in the Unit Test Import for Linux. This problem does not appear in the Unit Test Import for Windows.
I have attached a Unit Test export called PROC1.XML It tests a procedure that is included in another attachment called PROC1.txt. The unit test includes 2 implementations. Both implementations pass non-ASCII characters to the procedure and return them unchanged.
In Linux, the unit test import will change the non-ASCII characters in the XML file to xFFFD. If I copy/paste the the non-ASCII characters into the Unit Test after the import, they will be stored and executed correctly.
Amazon Ubuntu 3.13.0-45-generic / lubuntu-core
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.7.0_76-b13)
Java HotSpot(TM) 64-Bit Server VM (build 24.76-b04, mixed mode)
In Windows, the unit test will import the non-ASCII characters unchanged from the XML file.
Windows 7 Home Premium, Service Pack 1
Oracle 11g Express Edition - AL32UTF8
SQL*Developer 4.0.3.16 Build MAIN-16.84
Java(TM) SE Runtime Environment (build 1.8.0_31-b13)
Java HotSpot(TM) 64-Bit Server VM (build 25.31-b07, mixed mode)
If SQL*Developer is coded the same between Windows and Linux, The JVM must be causing the problem.

Set the System property "mail.mime.decodeparameters" to "true" to enable the RFC 2231 support.
See the javadocs for the javax.mail.internet package for the list of properties.
Yes, the FAQ entry should contain those details as well.

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files?

Problem with non iPhone users receiving my text sent pictures. Can I make them smaller files? I know that is possible for email sent pics.

My bad, It was a Verizon problem. When they upgraded my phone they were supposed to remove all blocks on messaging . Found out they did not do this. All messaging now works. Thanks for listening.

Problems with non-ascii keywords

I have some problems with non-ascii keywords that makes the whole keyword feature useless for me. I don't know if I'm doing something wrong or if there something I'm missing completely.
The problem is that when I enter something like "grön" iPhoto sometimes refuses me to type in "grön" on another photo and "eats" the "ö". And if I select the matching keyword from the popup list iPhoto has changed the originally "grön" to "gr¨ön" (if that comes out right on the web). Here are a few screenshots to show what happens
If someone knows what happens I would really appriciate some hints on how to avoid this.
Note that adding/editing keywords works just fine in Aperture.

There is a long standing issue with iPhoto and non-ascii characters. I know of no solution.
iPhoto menu -> Provide iPhoto Feedback and report it as a bug.
Regards
TD

Problem with update SCCM client to Sp1 CU3 on Windows 2008 server

Hi all,
I have problem with update SCCM client on Windows 2008 Server to 2012 Sp1 CU3. I have sent to deployment package with update (SP1 Cumulative Update 3 - server update) on four servers and after few minutes I have got in Monitoring\Deployment details four
this same errors in "Asset Details":
USER Message ID
Status type Description
NT\AUTHORITY\SYSTEM 1006
Error 3003
I love that types of error... which is har to find answer on google :-( I have tried but I haven't find any constructive :-( Did you met with something similar? Which log I should check (sorry - I'm still noob in SCCM2012) to update actual SCCM Client SP1
(5.00.7804.1000) to SP1 CU3 (5.00.7804.1400)?
Thank you.

I see in fodler with CU3 updates, are four packages:
- SP1 Cumulative update 3 - x64 client update
- SP1 Cumulative update 3 - x86 client update
- SP1 Cumulative update 3 - server update
- SP1 Cumulative update 3 - console update
It will be stupid but... maybe I should deploy x64 client update package?

A problem with WAAS mobile client

The customer has a problem with WAAS mobile client. When he disabled WAAS mobile client - all is working, but http is not working.:-( On the server the accelerated networks are configured.The browser send the http request, but the response is not received:-( For other clients it is working. Thank you for help.

I have WAAS mobile server version 3.4.0.1460 on the Windows2003 server with SP1. Client OS is Windows XP. All clients who use WAAS mobile client have WinXP on their notebooks. All clients are on the same network. This client sees this problem when the waas client is active, disabled, and for now when the waas mobile client is uninstalled - it seems like waas mobile client changed registers for IE or FireFox - so all http answers are redirected to nonexisting waas mobile client:-(
Thank you
Roman

Problem with non-container managed entity manager

i am working on a project, in which i am using entity beans.i use netbeans, glassfish as application server and toplink as persistence provider .
i created a java class that handles all the operations with the entitys, which means i using non-container managed entity manager.
in the constructor
try{
            EntityManagerFactory emf = Persistence.createEntityManagerFactory("voidPU");
            entityManager = emf.createEntityManager();
        catch(Exception ex){
            throw new EJBException(ex.getMessage());
        }then i call a function in this class from a servlet
the code of the function
List users = null;
        try {
            ProgLanguages progLanguage = entityManager.find(ProgLanguages.class, languageId);
            users = (List) progLanguage.getUserIdCollection();
        catch(IllegalStateException illegalStateException){
            throw new EJBException(illegalStateException.getMessage());
        catch(IllegalArgumentException illegalArgumentException) {
            throw new EJBException(illegalArgumentException.getMessage());
        }i got an IllegalArgumentException saying Unknown entity bean class: class vanguard.server.entity.ProgLanguages, please verify that this class has been marked with the @Entity annotation
what confuses me is that sometimes it works and most of the time it does not work, have i made anything wrong?, or there is a problem with any of the tools netbeans, glassfish, or toplink?

Is it always the same entity that is reported as 'unknown' ? You mention that it works sometimes but is it the same deployment and the same code that works? The first thing I would verify is that the ear is being created as expected by netbeans. Check the persistence.xml file and verify that all of the classes are listed that will be used as entities.
--Gordon

Problem with Non-English Fields Output to PDF by JASPER in JDev10.1.3

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

I am using jsprx files(designed in i-report) to generate pdf reports out of an oracle database.
The non-English fields are shown correctly when I output the report into an HTML or when I view it with JasperView.
If I try making PDF files (JasperExportManager.exportReportToPdfFile) the static fields containing e.g.Arabic/Chineese characters won't be displayed and dynamic fields from the database with non-English contents will be shown as ??? or null.
I received some suggestions about using PARAMETERS to feed the report instead of FIELDS, which I think can not be helpful in this case and in general.
I think this should be a common problem. These are the components I am using:
itext-1.4.7. jar
commons-digester- 1.7.zip
jasperreports- 1.2.8.jar
Any comment or help is appreciated.
Thanks
Farbod

Problem with clob_write under client 9.2.0.6: UnsatisfiedLinkError

Hi all,
I'm running Oracle client 9.2.0.4 on Windows XP and Java 1.4.1_3.
Writing or reading clob's works pretty well.
As i tried to update to Oracle client 9.2.0.6, i got the error
Communication failed: java.lang.UnsatisfiedLinkError: clob_write when i tried to write a clob. The same error appears when i tried to read a clob.
Is there a specific problem with clobs under this client?
All other JDBC operations work as good as before.
Thanks.

Here is another hint.
In your classpath, use the jdbc driver that's under your oracle installation to which you are trying to connect to (ie, <ORACLE_HOME>\ora92\jdbc\lib\ojdbc14.jar).
I had the same problem in 9.2.0.6 and its gone when I replaced the ojdbc14.jar. I copied the ..\ora92\jdbc\lib\ojdbc14.jar to my java client program's classpath, and ran the java client without getting the UnsatisfiedLinkError.
It looks like the ocijdbc9.dll under ora92\bin has to match correctly with the jdbc drivers you would be using. I got this idea from this link:
http://episteme.arstechnica.com/groupee/forums/a/tpc/f/6330927813/m/705001068631/inc/-1
Hope this helps.

Problem with non-ASCII file name in content disposition header

Hi All,
I am facing some problems with the non-ASCII file name incase of content-disposition header. I read from the RFC 2183 that if the file name contains non-ASCII characters then the same should be encoded before sending to browser. I did the same but realized 2 problems:
1. The name of the file is truncated in case the file name is slightly long for e.g. ��j�b�g��.txt
2. Also when the same file is opened in notepad, the title is showing encoded name %E6%9C%80%E4%B8%8A%E4%BD%8D.....
Overall, I feel that the browser is not understanding or responding to the encoded header values.
Is there any solution to this problem? I am using Microsoft IE 6.0.
The code snippet is given below:
protected void doGet(HttpServletRequest req, HttpServletResponse resp) throws ServletException, IOException {
          String fileName = "��j�b�g��.txt";
          fileName = URLEncoder.encode(fileName, "UTF-8");
          resp.setCharacterEncoding("UTF-8");
          resp.setHeader("Content-Disposition", "attachment; filename=\"" + fileName + "\"");
          resp.setContentType("application/download-binary");
          String s = "This is inside txt file";
          resp.getOutputStream().write(s.getBytes("UTF-8"));
          return;
     }Any help or pointer would be highly appreciated.
Thanks and Regards,
Ashish

The MIME standards for non-ASCII filenames are not widely implemented.
Many mailers use an ad hoc method for encoding filenames. JavaMail
supports both methods, but you need to set properties, such as the
mail.mime.encodefilename property. See the JavaMail javadocs for
the javax.mail.internet package.

Problem with Non-cumulative key figure.

Hi all,
I am facing the problem with the Non-cumulative Key Figure (Quantity). I have created and loaded data to the non-cumulative InfoCube. <b>This cube is defined by me to test the non-cumulative key figure.</b>
<b>In BEx query the non-cumulative key figure and cumulative key figure (Value change) both display same values, i.e. non-cumulative key figure contains the same values which we have loaded for cumulative value change. Non-cumulative key figure is not calculated based on associated cumulative key figure.</b>
I have done the following while defining the non-cumulative InfoCube:
1. Created a non-cumulative key figure which is associated with a cumulative key figure (value change).
2. Loaded data to non-cumulative InfoCube from flat file.
3. Compressed data in non-cumulative InfoCube after the load.
Note:
1. Validity area is determined by the system based on the minimum and maximum date in data.
2. Validity determining characteristic, 0CALDAY is the default characteristic selected by the system.
Is there any other settings to be done?
Please help me in resolving this issue.
Thanks and regards
Pruthvi R

Being a non-cumulative KF, total stock is automatically takes care of that.
Try putting all the restrictions which you have included for total receipts and total issues, for eg, restrict Total Stock with the movement types used in Receipts as well as Issues.
Check and revert.
Regards
Gajendra

Problem with non-stop looping

This file has been supposedly changed from As2 to As3. It seems as if it used to stop when I first got it. But the links didn't work. When I followed troubleshooting protocols, it started looping non-stop.
Please help. I can't seem to attach the flv and the action script files. All I get from the output window is "Fonts should be embedded for any text that may be edited at runtime, other than text with the "Use Device Fonts" setting. Use the Text > Font Embedding command to embed fonts."
Please help. I paid a coder to switch the file from as2 to as3 and this is what he gave me...

contact that coder and let them know the problem. if it's a problem with their code, they should fix it without charge.

Problem with Non JSF Request to JSF Page

Hi All,
I am working on dynamic controls generation based on the request come from non jsf page
For the first request, pageworks perfectly. but when we go for second request, it is not rendering and I am getting same old page.
What I have identified is if I have 2 pages as JSF, application is not giving any problem.
For this I have written small test application contains both JSF pages only.
page1 contains 3 submit buttons.
When submit buttons are clicked based on the request, I get, am able to see the dynamic controls.
SO there is no problem with JSF PAGE to JSF Page Communication
Now I have done some changes in First JSF page. Instead of submitting directly I am submitting the page through JavaScript which is nonb JSF request. There I am facing the problem and based on requested qaction I am not able to see correct rendered page based on the requested action.
Any Idea why it is giving problem for non JSF requests??
Thanks
Sudhakar

For Your Convenience in understanding the problem
I am pasting entire test code
Page 1 -- (here page2 is Page1 and Page1 is page2 - some naming convention errors :) )
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
    <f:view>
        <html lang="en-US" xml:lang="en-US">
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>Page2 Title</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                <h:form binding="#{Page2.form1}" id="form1">

                    <h:commandButton action="#{Page2.button1_action}" binding="#{Page2.button1}" id="button1" style="left: 48px; top: 48px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=1'; document.forms['form1'].submit(); return false;"/>
                    <h:commandButton action="#{Page2.button2_action}" binding="#{Page2.button2}" id="button2" style="left: 48px; top: 96px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=2'; document.forms['form1'].submit(); return false;"/>
                    <h:commandButton action="#{Page2.button3_action}" binding="#{Page2.button3}" id="button3" style="left: 48px; top: 144px; position: absolute" value="Submit" onclick="document.forms['form1'].action='faces/Page2.jsp?id=3'; document.forms['form1'].submit(); return false;"/>

                    
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>Page1 Bean
* Page2.java
* Created on June 25, 2005, 11:08 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
import javax.servlet.http.HttpSession;
public class Page2 extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
    private int __placeholder;
    private HtmlForm form1 = new HtmlForm();
    public HtmlForm getForm1() {
        return form1;
    public void setForm1(HtmlForm hf) {
        this.form1 = hf;
    private HtmlCommandButton button1 = new HtmlCommandButton();
    public HtmlCommandButton getButton1() {
        return button1;
    public void setButton1(HtmlCommandButton hcb) {
        this.button1 = hcb;
    private HtmlCommandButton button2 = new HtmlCommandButton();
    public HtmlCommandButton getButton2() {
        return button2;
    public void setButton2(HtmlCommandButton hcb) {
        this.button2 = hcb;
    private HtmlCommandButton button3 = new HtmlCommandButton();
    public HtmlCommandButton getButton3() {
        return button3;
    public void setButton3(HtmlCommandButton hcb) {
        this.button3 = hcb;
    // </editor-fold>
    public Page2() {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
        try {
        } catch (Exception e) {
            log("Page2 Initialization Failure", e);
            throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
        // </editor-fold>
        // Additional user provided initialization code
    protected webapplication8.ApplicationBean1 getApplicationBean1() {
        return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
    protected webapplication8.SessionBean1 getSessionBean1() {
        return (webapplication8.SessionBean1)getBean("SessionBean1");
     * Bean cleanup.
    protected void afterRenderResponse() {
    public String button1_action() throws Exception{
        // TODO Following code was replaced by static navigation
       getSessionBean1().setId(1);
      /* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
       return null;*/
        return "case1";
    public String button2_action() throws Exception{
        // TODO Following code was replaced by static navigation
            getSessionBean1().setId(2);
      /* ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
       return null;*/
        return "case2";
    public String button3_action() throws Exception{
        // TODO Following code was replaced by static navigation
            getSessionBean1().setId(3);
        /*    ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
       HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
       HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
       res.sendRedirect("http://localhost:18080/webapplication8/faces/Page2.jsp");
        return null;*/
        return "case3";
}page 2
<?xml version="1.0" encoding="UTF-8"?>
<jsp:root version="1.2" xmlns:f="http://java.sun.com/jsf/core" xmlns:h="http://java.sun.com/jsf/html" xmlns:jsp="http://java.sun.com/JSP/Page">
    <jsp:directive.page contentType="text/html;charset=UTF-8" pageEncoding="UTF-8"/>
    <jsp:text><![CDATA[
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN"
"http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
]]></jsp:text>
    <f:view>
        <html lang="en-US" xml:lang="en-US">
            <head>
                <meta content="no-cache" http-equiv="Cache-Control"/>
                <meta content="no-cache" http-equiv="Pragma"/>
                <title>Page1 Title</title>
                <link href="resources/stylesheet.css" rel="stylesheet" type="text/css"/>
            </head>
            <body style="-rave-layout: grid">
                <h:form binding="#{Page1.form1}" id="form1">
                    <h:panelGrid binding="#{Page1.gridPanel1}" id="gridPanel1" style="left: 96px; top: 48px; position: absolute"/>
                    <f:selectItems binding="#{Page1.radioButtonList1SelectItems1}" id="radioButtonList1SelectItems1"/>
                    <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1"
                        style="left: 384px; top: 120px; position: absolute" value="Submit"/>
                    <h:commandButton action="#{Page1.button1_action}" binding="#{Page1.button1}" id="button1" style="left: 384px; top: 72px; position: absolute" value="Submit"/>
                    <h:outputLink binding="#{Page1.hyperlink1}" id="hyperlink1" style="left: 480px; top: 216px; position: absolute" value="http://www.sun.com/jscreator">
                        <h:outputText binding="#{Page1.hyperlink1Text}" id="hyperlink1Text" value="Hyperlink"/>
                    </h:outputLink>
                    <h:commandLink binding="#{Page1.linkAction1}" id="linkAction1" style="left: 456px; top: 264px; position: absolute">
                        <h:outputText binding="#{Page1.linkAction1Text}" id="linkAction1Text" value="Link Action"/>
                    </h:commandLink>
                </h:form>
            </body>
        </html>
    </f:view>
</jsp:root>page2 bean
* Page1.java
* Created on June 25, 2005, 10:52 AM
* Copyright user
package webapplication8;
import javax.faces.*;
import com.sun.jsfcl.app.*;
import com.sun.jsfcl.data.DefaultSelectItemsArray;
import java.util.Vector;
import javax.faces.component.UIComponent;
import javax.faces.component.UISelectItems;
import javax.faces.component.html.*;
import javax.faces.context.ExternalContext;
import javax.faces.context.FacesContext;
import javax.faces.el.ValueBinding;
import javax.faces.model.SelectItem;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;
public class Page1 extends AbstractPageBean {
    // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Definition">
    private int __placeholder;
    private HtmlForm form1 = new HtmlForm();
    public HtmlForm getForm1() {
        return form1;
    public void setForm1(HtmlForm hf) {
        this.form1 = hf;
    private HtmlPanelGrid gridPanel1 = new HtmlPanelGrid();
    public HtmlPanelGrid getGridPanel1() {
        return gridPanel1;
    public void setGridPanel1(HtmlPanelGrid hpg) {
        this.gridPanel1 = hpg;
    private HtmlCommandButton button1 = new HtmlCommandButton();
    public HtmlCommandButton getButton1() {
        return button1;
    public void setButton1(HtmlCommandButton hcb) {
        this.button1 = hcb;
    private HtmlOutputLink hyperlink1 = new HtmlOutputLink();
    public HtmlOutputLink getHyperlink1() {
        return hyperlink1;
    public void setHyperlink1(HtmlOutputLink hol) {
        this.hyperlink1 = hol;
    private HtmlOutputText hyperlink1Text = new HtmlOutputText();
    public HtmlOutputText getHyperlink1Text() {
        return hyperlink1Text;
    public void setHyperlink1Text(HtmlOutputText hot) {
        this.hyperlink1Text = hot;
    private HtmlCommandLink linkAction1 = new HtmlCommandLink();
    public HtmlCommandLink getLinkAction1() {
        return linkAction1;
    public void setLinkAction1(HtmlCommandLink hcl) {
        this.linkAction1 = hcl;
    private HtmlOutputText linkAction1Text = new HtmlOutputText();
    public HtmlOutputText getLinkAction1Text() {
        return linkAction1Text;
    public void setLinkAction1Text(HtmlOutputText hot) {
        this.linkAction1Text = hot;
    // </editor-fold>
    public Page1() {
        // <editor-fold defaultstate="collapsed" desc="Creator-managed Component Initialization">
        try {
            ExternalContext ctx=(ExternalContext)FacesContext.getCurrentInstance().getExternalContext();
            HttpServletRequest req=(HttpServletRequest)ctx.getRequest();
            HttpServletResponse res=(HttpServletResponse)ctx.getResponse();
            String id=req.getParameter("id");
            if(id!=null)
                getSessionBean1().setId(Integer.parseInt(id));
            if (getSessionBean1().getId()==1) {
                addTextBox();
            else if (getSessionBean1().getId()==2) {
                addCheckBox();
                addRadio();
            else if (getSessionBean1().getId()==3) {
                addRadio();
               // addCheckBox();
        } catch (Exception e) {
            log("Page1 Initialization Failure", e);
            throw e instanceof javax.faces.FacesException ? (FacesException) e: new FacesException(e);
        // </editor-fold>
        // Additional user provided initialization code
    protected webapplication8.ApplicationBean1 getApplicationBean1() {
        return (webapplication8.ApplicationBean1)getBean("ApplicationBean1");
    protected webapplication8.SessionBean1 getSessionBean1() {
        return (webapplication8.SessionBean1)getBean("SessionBean1");
     * Bean cleanup.
    protected void afterRenderResponse() {
    private void addRadio() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Desc");
        outputText.setId("somedesc2");
        HtmlSelectOneRadio checkBox = new HtmlSelectOneRadio();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        checkBox.setId("a3");
        UISelectItems items = new UISelectItems();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<10;i++) {
            arrays[size - 1].add(new SelectItem(""+i+"",""+i));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addCheckBox() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Desc");
        outputText.setId("somedesc1");
        HtmlSelectManyCheckbox checkBox = new HtmlSelectManyCheckbox();
        checkBox.setBorder(0);
        checkBox.setLayout("pageDirection");
        checkBox.setId("a2");
        UISelectItems items = new UISelectItems();
        DefaultSelectItemsArray objArray =new DefaultSelectItemsArray();
        vectDefaultSelectItemsArray.add(objArray);
        arrays=(DefaultSelectItemsArray[])vectDefaultSelectItemsArray.toArray(new DefaultSelectItemsArray[vectDefaultSelectItemsArray.size()]);
        int size =arrays.length;
        arrays[size - 1].clear();
        for (int i =0;i<10;i++) {
            arrays[size - 1].add(new SelectItem(""+i+"",""+i));
        // array.setItems(new String[] {"Yes","No" });
        items.setValueBinding("value",getValueBinding("#{Page1.arrays["+(size-1)+"]}"));
        checkBox.getChildren().add(items);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(checkBox);
        parent.getChildren().add(gridPanel);
    private void addTextBox() {
        HtmlPanelGrid gridPanel = new HtmlPanelGrid();
        UIComponent parent = gridPanel1;
        HtmlOutputText outputText = new HtmlOutputText();
        outputText.setValue("Some Description for Control Text Box");
        outputText.setId("somedesc");
        HtmlInputText textField = new HtmlInputText();
        // textField.setId("textField_"+control.getId());
        textField.setId("a1");
        HtmlOutputText outputText1 = new HtmlOutputText();
        hyperlink1Text.setValue(" ");
        hyperlink1Text.setStyleClass("bodyText");
        textField.setStyleClass("frmObjects");
        gridPanel.setColumns(3);
        gridPanel.getChildren().add(outputText);
        gridPanel.getChildren().add(hyperlink1Text);
        gridPanel.getChildren().add(textField);
        parent.getChildren().add(gridPanel);
    private DefaultSelectItemsArray array = new DefaultSelectItemsArray();
    public DefaultSelectItemsArray getArray() {
        return array;
    public void setArray(DefaultSelectItemsArray dsia) {
        this.array = dsia;
    private Vector vectDefaultSelectItemsArray = new Vector();
    private DefaultSelectItemsArray[] arrays = new DefaultSelectItemsArray[10];
    public DefaultSelectItemsArray[] getArrays() {
        return arrays;
    public void setArrays(DefaultSelectItemsArray[]dsia) {
        this.arrays = dsia;
    private UISelectItems radioButtonList1SelectItems1 = new UISelectItems();
    public UISelectItems getRadioButtonList1SelectItems1() {
        return radioButtonList1SelectItems1;
    public void setRadioButtonList1SelectItems1(UISelectItems uisi) {
        this.radioButtonList1SelectItems1 = uisi;
    private ValueBinding getValueBinding(String expression) {
        return     FacesContext.getCurrentInstance().getApplication().createValueBinding(expression);
    public String button1_action() {
        // TODO Replace with your code
        return "case1";
}my navigation.xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                              "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
    <navigation-rule>
        <from-view-id>/Page2.jsp</from-view-id>
        <navigation-case>
            <from-outcome>case1</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
        <navigation-case>
            <from-outcome>case2</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
        <navigation-case>
            <from-outcome>case3</from-outcome>
            <to-view-id>/Page1.jsp</to-view-id>
        </navigation-case>
    </navigation-rule>
    <navigation-rule>
        <from-view-id>/Page1.jsp</from-view-id>
        <navigation-case>
            <from-outcome>case1</from-outcome>
            <to-view-id>/Page2.jsp</to-view-id>
        </navigation-case>
    </navigation-rule>
</faces-config>my managed beans xml
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE faces-config PUBLIC "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
                              "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
<faces-config>
    <managed-bean>
        <managed-bean-name>Page1</managed-bean-name>
        <managed-bean-class>webapplication8.Page1</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>SessionBean1</managed-bean-name>
        <managed-bean-class>webapplication8.SessionBean1</managed-bean-class>
        <managed-bean-scope>session</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>ApplicationBean1</managed-bean-name>
        <managed-bean-class>webapplication8.ApplicationBean1</managed-bean-class>
        <managed-bean-scope>application</managed-bean-scope>
    </managed-bean>
    <managed-bean>
        <managed-bean-name>Page2</managed-bean-name>
        <managed-bean-class>webapplication8.Page2</managed-bean-class>
        <managed-bean-scope>request</managed-bean-scope>
    </managed-bean>
    <managed-bean>
</faces-config>

Problems with non-electable client

Similar Messages

Maybe you are looking for