Problems with Office Plugin

Hello!
I'm having problems with the Rights Management Office Plugin. Adobe Pro is working fine and connected properly with the LiveCycle server, but when i try to configure the LiveCycle Server in the Office Plugin (in the office 32 bit version) i get an error about the certificate, something like "It was not possible to find the site certificate, contact your administrator..." any ideas of why is this happening?
Thank you so much,
Best regards

Hello everybody,
I am not quite thrilled by the idea of uninstalling a Microsoft patch in order to use this add-on. Leaving a known vulnerability unpatched at the expense of using an application feature is not my sense of complete security.
Is Adobe aware of the situation? Is there a fix available from Adobe? How can we engage Adobe on this?
Thanks in advance for all your answers and help in this matter.
Thanks
Mayank

Similar Messages

Problems with NIK Plugins

Hi all,
a lot was said already about problems with using Nik plugins in PS5 64 bit mode, but I'm not getting closer to a final solution.
I have installed all latest NIK plugin updates without problems.
According to their website all of their plugins are running now in a 64 bit mode.
In CS4 I can open and work with all plugins, BUT ONLY after removing the 'Selective Tool' from the plugin folder.
When it is not removed, PS4 is crashing all the time immediately after opening.
In Dfine plugin I noticed that my pointer is always a bit flickering during processing.
In CS5 it is the same; if the Selective tool is in the Plugin folder, it won't opening.
After removing it, in 32 bit mode I can open and work with all installed plugins.
But in 64 bit mode I'm able to work only with Silver Efex and HDR Efex Pro, but as soon I open Dfine, Sharpener, Viveza or Color Efex CS5 is crashing immediately.
I'm running a Mac pro with plenty power, ram etc, all updated and cleaned up.
What is other people's latest experience regarding that issue?
Thanks

Hi to all,
here I like to give you an update on my experience with NIK Plugins.
After beeing unable to solve my NIK problems by myself and in the forum I was contacting NIK, and their respons email told me only the following:
"In case of experiencing problems with their plugins in 64 bit mode remove all Duplicate Ariel Fonts"
Since I read about that already earlier, that reason had been ruled out.
BUT I got the idea simply to remove all my Arial Fonts from my Library (to the Desktop), and surprisingly ALL NIK plugins now were functioning without bringing CS5 to crash at start-up.
Unfortunately over the last days, especially on working with big file size pictures (around 200 MB) and plenty layers, CS5 crashed again often after initializing of the plugins.
Than I read today the post from Grey Havens, who suggested to set the percentage of RAM what Photoshop should use to maximal 60%.
Since I do have 14 GB RAM available, I indeed reduced the settings from 85% to 65%.
2 of my 3 internal HD's are assigned as scratch disk, as recommended by Adobe.
Thanks Grey, as you described, all plugins are opening now very fast, and I just tried all applications with big files, many layers and CMYK files,
without having any crash so far anymore.
If this continues, than I dont have to use my CS4 or the CS5 in 32 bit mode anymore, which would make all easier for me.
Than it also doesn't matter that Photoshop has less RAM assigned, because in 64 bit mode the almost 9 GB RAM assigned is for me more than enough.
So what worked for me, might work also for other people with same problems:
---    I had to remove the 'Selective Tool' from all plugins in CS4 and in CS5
---    I had to remove all Arial Fonts from my Font Library
---    I set in Preferences Performance the 'Let Photoshop Use RAM' to 65% only
Regards
Michael

I have problems with office for mac screen resolution, specially with excel

I have problems with office for mac screen resolution, specially with excel ?

For starters, make sure to Check for Updates on any of the Help menus, and make sure the product has all the latest patches. MS did come out with a patch addressing the display issues on Retina Macs. Latest patchlevel is 14.3.2.
We are talking about Office:Mac 2011, right?

A problem with DigitalPersona plugin in ff5.

Hi. Got a problem with DigitalPersona plugin. I'm using FF5 now, so it doesn't work, but I wonder if there's a way to deal with it. I mean, maybe someone know anything to make it work on FF5 without violating their rights. When using almost 50 symbol passwd it's some kind of bothering without DP ;p

After more searching and plugin decompiling, I found that the problem occurs when it tries to access to the registry using the following key:
"Software\\Serena\\Dimensions\\" + System.getProperty("oracle.jdevimpl.vcs.dimensions.clientVersion", "9.1") + "\\PC Client"
I don't know where the value of "oracle.jdevimpl.vcs.dimensions.clientVersion" is supposed to come from.
I tried to set it using the jdev.conf file:
AddVMOption -Doracle.jdevimpl.vcs.dimensions.clientVersion=10.1
It works a little better: I get the connection window. But when I provide the connection parameters and clic on "OK", I get the following error message:
"Could not recognize output from the command."
We are using Dimensions 10.1.3.
Is this version not compatible with the plugin ?

Problem with Office document structure when exporting in Windows vs full-text indexing in SQL Server

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Post Author: Atarel
CA Forum: Exporting
Product: Crystal Report for .Net 2005Version: distributed with VS 2005Patches Applied: hot fix crnet20win32x86_en_chf.zipOperating System(s): Win2000 Pro SP4, WinXP SP2, Win 2003 Server SP1, Win 2003 Server SP2Database(s): SQL Server 2000, SQL Server 2005Error Messages: None
We are creating reports with Crystal Report for .Net. We both have a Windows and a Web application connecting to our database. The problem occurs only with the Windows application. We create a report and in the dialog that appears, we choose to export the report in MS Word format. Everythinglooks fine because after we save the document, MS Word is able to open and display the document. However, when we decide to add this Word document in the database in a table that has a image column bound to a full-text indexing schema, that document is never indexed. After fiddling around for a few hours, we realized that the Word document produced during the export is not a true Word document but rather a RTF document that was given a ".doc" extension. Is there a way to have a real Word document when exporting in Windows. The problem does not arise in Web because when we export, the report is displayed in Internet Explorer through the Office plugin. The Office plugin knows how to same a real Word document.
There is also a problem when exporting to Excel in Windows. It does not yield the same structure as in Web. The format of the export in Windows is not compatible with the Office IFilter of SQL Server 2000/2005, therefore the content is not available for search queries.
Any patches to fix this problem?
Regards,
Ian Perreault

Report generation toolkit problem with office 2000 and office XP

Hello, I am having a problem with running my vi after it is compiled with application builder. The dev machine is an XP box and the targer is windows 2000. I included _Excel Dynamic VIs.vi and _Word Dynamic VIs.vi from the office 2000 section of the install cd (for the report toolkit) in the compile but did not include those files for XP. When I run the application on the target machine (2000), the reporting functions call Excel just fine and the program does not come up with any errors. The program however, is not loading the approprate template and inserting the approprate data. Did I leave some neccessary files out of the compile? Thanks in advance!
Greg
Gregory Osenbach, CLA
Fluke

Hi Acer,
The recommended procedure in your case is to install Microsoft Office 2000 on the development machine and then reinstall the LabVIEW Report Generation Toolkit. When the toolkit is installed, it will check for the current version of Office and install the corresponding VIs to support it. The VIs include different ActiveX calls according to the version of Office. Therefore it is not enough to change the support manually without having the correct version of Office installed first.
However, I would recommend that you just try to run your executable on a machine that has Office 2000 installed. The difference in the ActiveX API for Office XP and 2000 is not that significant, so your application might work perfectly on an Office 2000 machine. If you try to run the executable on a machine with Office 97 installed I'm willing to bet my right arm that you will experience errors.
Good luck Acer!
- Philip Courtois, Thinkbot Solutions

Problems with Office 2011 for mac after upgrading to Mountain Lion

Office 2011 for mac worked fine with Lion on my MacBook Air. I had been having some problems with my computer freezing and crashing, so the folks at the Genius Bar wiped my computer clean and installed Mountain Lion for me.
I have full backups (Time Machine) from before the wipe on my external hard drive, but I was told not to restore from the backup, that I should drag and drop files instead. I was also told to re-install any program for which I had the disk. I reinstalled Office 2011 via the disk.
Two major problems followed:
1.     I lost all my old emails (I use Mail). Even rebuilding the library or trying to restore them from Time Machine don't get them back.
2.     Word and Excel don't seem to recognize me anymore. I can pull up and modify an old document or workbook, but I cannot "save" my changes. I have to hit "save as." That's a pain, but there's a worse problem.
I have no trouble saving these "save as" versions to my desktop or to my Documents file. But I cannot save them anywhere else — even to the folder where I found the original document. I get a message that I don't have the necessary permissions to access or modify the folders. I'm asked to authenticate, and I do, but that doesn't seem to do anything.
I tried Get Info on the workbooks and documents, and I'm clearly granted Read and Write permission.
I've done a permissions repair via Disk Utility. There were some things to repair, but it didn't solve my problem.
I know I can move all documents to an external hard drive and then recreate all the folders, saving all the documents and workbooks "as" but it seems a huge amount of work. Can anybody suggest an easier route or how to get my email history?

You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: 'resetpassword' (without the 's) and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/

Is anyone else having problems with Office for Mac and Lion?

Since installing Lion 10.7.1 on a macbook pro 2.53 Ghz 4GB 1067 MHz DDR3 I have had no end of problems. Both Excel and Word hang, crash and saving an Excel file is a pain. A 12mb spread sheet just took 4 minutes to save! I have MS Office for Mac 2011 version 14.1.3.
Another problem that may not be related to Office is that opening Finder is so slow and most of the time it takes a minute to display folders in Desktop or Documents.
Any suggestions would be welcome .. I regret installing Lion .. I had no problems with Snow Leopard!

botro wrote:
I'm unable to install the MS Office 14.1.3 update - I keep getting "Installation Failure"
I have not found a solution on this board or Microsoft community
This thread had some things to try.

Problems with office after upgrade to ERP 6.0

After upgrade from R3 46c to ERP 6.0 , we installed sap gui 710 with patch 14 and in many frontends a new version of Microsoft Office 2003 SP3.
In many PCs now we have a problem with macros and templates from PA20 transacction with Documents Management.
We try to execute a Wor for a personnel number with infotype 910 and I have the nex messages when Windows open the Word 2003.
"Al abrir este domento, se ejecutará el comando SQL siguiente:
SELECT * FROM C:/DOCUMEN1andreaCONFIG1TempDatasource_tab.SAP
Los datos de la base de datos se colocarán en el documento. ¿Desea continuar?"
If you select "Si", appear another message ~SAP(BA6580C1-BE84.... es un documento principal de combinación. Word no puede encontrar el origen de datos"
When, word document is dsplayed, we only see name of variable and they are not reeplaced by its value.

Sorry, but the note is in Spain (I guess), can you please translate?
We have the same issue on our productive HR system - but not on the development system, what makes it curious.
When we try to start contracts in word we get the same message
"Opening this will run the following SQL command
SELECT * FROM C:\.....Datasource_tab.SAP
How can we avoid this message?
Thanks in advance!

I'm having problems with the plugin

It constantly asks me if i want to continue or stop the 'scrip'. Also, i'm having problems with the tabs constantly loading. Like I'm on a page, and then i found the page reloading itself when i'm looking at the page. I'd like to know how i can fix those problems i've reinstalling firefox, but that doesn't seem to work, i've tried reinstalling the plugin but that doesn't work either. I was wondering what version of the plugins does firefox use.

Here's an explanation of what those processes are.
Inside Flash Player Protected Mode for Firefox
I'm curious about what you did to uninstall just those.

Anyone else having problems with Flash plugin 10.3.181.14 on FF4.01

Over the last 2-3 days I've had a problem with FF hanging when loading some sites. This problem disappears if I disable the Flash plugin.

They are looking into it, but they are moving incredibly slow. Meanwhile, They are getting unhappy customers who are trying to tweak their browsers in such a way to force Adobe to work for them so they can do what they need. I even had to lower the Plugin Containers priority setting to low so it doesn't hog the CPU so I can do what I need, If barely. Its just frustrating and I am doing what I can to come up with something I can hand Adobe and say Here! Now fix it. lol

Problems with offical servise

I need to post here my problem.... I have 2 major problems with my xperia z2 (there is no 4G signal and have voice issue)....i send phone to offical servise but when i get my phone back, not only they didt repair mob but they damage my phone and now i even cant use sim card any more....so what to do in this case....how to get new phone

http://www.sonymobile.com/global-en/support/contact-us/
"I'd rather be hated for who I am, than loved for who I am not." Kurt Cobain (1967-1994)

URL problem with Java Plugin 1.4.1

To whom it may concern:
We are developers working in java and we are experiencing a problem with the new Java plug-in (version 1.4.0) that are not able to solve ourselves:
We have an applet that needs to read URL�s. When we run the applet locally, this URL is:
"file:/C:/proof/hunter%20media/images/classic.ski". When we try to open an stream to this URL it doesn't work. The message that we obtain is:
access denied (java.io.FilePermission C:\proof\hunter media\images\classic.ski read)
but all the permissions are OK. Also, if we remove the whitespace from URL the applet works OK.
We have tested the applet in Windows XP with Netscape 7.0, Internet Explorer 6.0.2 and tha Java plugin version is 1.4.0.
Is there any problem with the whitespaces in URL opened locally?
Please advice,
Kind regards,
Fernando

Doesn't a url require "file://....?

URL problem with Java plugin 1.4.0

To whom it may concern:
We are developers working in java and we are experiencing a problem with the new Java plug-in (version 1.4.0) that are not able to solve ourselves:
We have an applet that needs to read URL�s. When we run the applet locally, this URL is:
"file:/C:/proof/hunter%20media/images/classic.ski". When we try to open an stream to this URL it doesn't work. The message that we obtain is:
access denied (java.io.FilePermission C:\proof\hunter media\images\classic.ski read)
but all the permissions are OK. Also, if we remove the whitespace from URL the applet works OK.
We have tested the applet in Windows XP with Netscape 7.0, Internet Explorer 6.0.2 and tha Java plugin version is 1.4.0.
Is there any problem with the whitespaces in URL opened locally?
Please advice,
Kind regards,
Fernando

Hi Fernando,
What do you mean u removed the whitespaces. I am actually trying to work my way around a similar problem. I am trying to access a URL from a locally loaded applet. But i get a security exception too.
http://osmv.soe.umich.edu/blueskies/kgs99/kgs99.txt
how do i strip it of whitespace?
Thanks,
Shantanu

Problem with WSAD plugin

I have a problem with the websphere studio v5.1.1 (eclipse) plugin.
I've set up the plugin as explained in the doc. I've added the db2java.zip
file with the other kodo libs for the db2 driver and added the following
line in plugin.xml :
<library name="db2java.zip"/>
In the preference/kodo I've just filed the "kodo properties file" area
with the name of my kodo.properties file. All other fields are empty
The kodo.properties file contains (amongst other things):
javax.jdo.PersistenceManagerFactoryClass=kodo.jdbc.runtime.JDBCPersistenceManagerFactory
javax.jdo.option.ConnectionDriverName=COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionUserName=wasdev
javax.jdo.option.ConnectionPassword=<pwd>
javax.jdo.option.ConnectionURL=jdbc:db2:cluster
kodo.jdbc.sql.DBDictionary=db2
Now the problem. From WSAD, menu Kodo
- menu "enhance metadata" works well
- menus "refresh mapping", "drop mappings" and "build schema" give the
following error: "kodo.util.FatalDataStoreException: No suitable driver"
Note that the mappingtool works perfectly well with the same
kodo.properties file and on the same package.jdo file outside WSAD.
It seems that it finds the class "COM.ibm.db2.jdbc.app.DB2Driver" from
db2java.zip, but is not able to map the url "jdbc:db2:cluster" to this
driver.
Context:
- WSAD 5.1.1
- DB2 7.2 FP11
- kodo evaluation v 3.1.0
- Windows XP FP1
Thanks for your help.
Part of the Traceback from eclipse logs:
!java.sql.SQLException: No suitable driver
     at java.lang.Throwable.<init>(Throwable.java)
     at java.lang.Throwable.<init>(Throwable.java)
     at java.sql.SQLException.<init>(SQLException.java:72)
     at java.sql.DriverManager.getDriver(DriverManager.java:266)
     at
com.solarmetric.jdbc.PoolingDataSource.getDriver(PoolingDataSource.java:271)
     at
com.solarmetric.jdbc.PoolingDataSource.newConnection(PoolingDataSource.java:313)
     at
com.solarmetric.jdbc.ConnectionPoolImpl.makeConnection(ConnectionPoolImpl.java:270)
     at
com.solarmetric.jdbc.ConnectionPoolImpl.getConnection(ConnectionPoolImpl.java:178)
     at
com.solarmetric.jdbc.PoolingDataSource.getConnection(PoolingDataSource.java:237)
     at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:130)
     at
com.solarmetric.jdbc.DecoratingDataSource.getConnection(DecoratingDataSource.java:81)
     at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:130)
     at
kodo.jdbc.schema.DataSourceFactory$DefaultsDataSource.getConnection(DataSourceFactory.java:295)
     at
kodo.jdbc.sql.DBDictionaryFactory.getDBDictionary(DBDictionaryFactory.java:56)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDBDictionaryInstance(JDBCConfigurationImpl.java:627)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:877)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDataSource(JDBCConfigurationImpl.java:967)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDataSource2(JDBCConfigurationImpl.java:976)
     at kodo.jdbc.schema.SchemaTool.<init>(SchemaTool.java:78)
     at kodo.jdbc.meta.MappingTool.newSchemaTool(MappingTool.java:269)
     at kodo.jdbc.meta.MappingTool.getSchemaTool(MappingTool.java:259)
     at kodo.jdbc.meta.MappingTool.run(MappingTool.java:898)

I changed for the net driver and it works. (Can not use jcc, as jcc driver
is for DB2 8.1 and I'm using DB2 7.2)
Thanks Kim!
However it sounds strange that the mapping tools used outside WSAD
recognize the db2 "app" type 2 driver format, and fail when they are use
inside WSAD as plugins... Should it be reported as a bug with the usage of
the "net" driver as workaround ?
Stephen Kim wrote:
First, I'd suggest trying the net (instead of app) or jcc driver.
Second, I would try pointing kodo.properties to a specific file.
Denis Forveille wrote:
I have a problem with the websphere studio v5.1.1 (eclipse) plugin.
I've set up the plugin as explained in the doc. I've added the db2java.zip
file with the other kodo libs for the db2 driver and added the following
line in plugin.xml :
<library name="db2java.zip"/>
In the preference/kodo I've just filed the "kodo properties file" area
with the name of my kodo.properties file. All other fields are empty
The kodo.properties file contains (amongst other things):
javax.jdo.PersistenceManagerFactoryClass=kodo.jdbc.runtime.JDBCPersistenceManagerFactory
javax.jdo.option.ConnectionDriverName=COM.ibm.db2.jdbc.app.DB2Driver
javax.jdo.option.ConnectionUserName=wasdev
javax.jdo.option.ConnectionPassword=<pwd>
javax.jdo.option.ConnectionURL=jdbc:db2:cluster
kodo.jdbc.sql.DBDictionary=db2
Now the problem. From WSAD, menu Kodo
- menu "enhance metadata" works well
- menus "refresh mapping", "drop mappings" and "build schema" give the
following error: "kodo.util.FatalDataStoreException: No suitable driver"
Note that the mappingtool works perfectly well with the same
kodo.properties file and on the same package.jdo file outside WSAD.
It seems that it finds the class "COM.ibm.db2.jdbc.app.DB2Driver" from
db2java.zip, but is not able to map the url "jdbc:db2:cluster" to this
driver.
Context:
- WSAD 5.1.1
- DB2 7.2 FP11
- kodo evaluation v 3.1.0
- Windows XP FP1
Thanks for your help.
Part of the Traceback from eclipse logs:
!java.sql.SQLException: No suitable driver
     at java.lang.Throwable.<init>(Throwable.java)
     at java.lang.Throwable.<init>(Throwable.java)
     at java.sql.SQLException.<init>(SQLException.java:72)
     at java.sql.DriverManager.getDriver(DriverManager.java:266)
     at
com.solarmetric.jdbc.PoolingDataSource.getDriver(PoolingDataSource.java:271)
     at
com.solarmetric.jdbc.PoolingDataSource.newConnection(PoolingDataSource.java:313)
     at
com.solarmetric.jdbc.ConnectionPoolImpl.makeConnection(ConnectionPoolImpl.java:270)
     at
com.solarmetric.jdbc.ConnectionPoolImpl.getConnection(ConnectionPoolImpl.java:178)
     at
com.solarmetric.jdbc.PoolingDataSource.getConnection(PoolingDataSource.java:237)
     at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:130)
     at
com.solarmetric.jdbc.DecoratingDataSource.getConnection(DecoratingDataSource.java:81)
     at
com.solarmetric.jdbc.DelegatingDataSource.getConnection(DelegatingDataSource.java:130)
     at
kodo.jdbc.schema.DataSourceFactory$DefaultsDataSource.getConnection(DataSourceFactory.java:295)
     at
kodo.jdbc.sql.DBDictionaryFactory.getDBDictionary(DBDictionaryFactory.java:56)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDBDictionaryInstance(JDBCConfigurationImpl.java:627)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getConnectionFactory(JDBCConfigurationImpl.java:877)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDataSource(JDBCConfigurationImpl.java:967)
     at
kodo.jdbc.conf.JDBCConfigurationImpl.getDataSource2(JDBCConfigurationImpl.java:976)
     at kodo.jdbc.schema.SchemaTool.<init>(SchemaTool.java:78)
     at kodo.jdbc.meta.MappingTool.newSchemaTool(MappingTool.java:269)
     at kodo.jdbc.meta.MappingTool.getSchemaTool(MappingTool.java:259)
     at kodo.jdbc.meta.MappingTool.run(MappingTool.java:898)
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

Problems with Office Plugin

Similar Messages

Maybe you are looking for