Problems with OFM 11.1.1.1 and OFM 11.1.1.2

I have a problem installing this products (11.1.1 and 11.1.2) in a machine with Windows XP SP3 (4GB RAM).
When the instalation is configure the pass:
- Executing opmnctl startproc ias-component=ReportsServer_XXX
it´s crash!.
in the log file, the message is "REP-50600 : Broadcasting is disabled. Please enable cosnaming for Reports discovery"
What is it???.
I have many PCs in my network and only crash in one PC. I don´t konw what is "Broadcasting is disable".
I find some post, that the workaround is:
edit the rwnetwork.conf with:
<?xml version="1.0" encoding="ISO-8859-1"?>
<discoveryService
     xmlns="http://xmlns.oracle.com/reports/network"
     xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
     xsi:schemaLocation="http://xmlns.oracle.com/reports/network file:C:\Oracle\Middleware\as_1/reports/dtd/rwnetworkconf.xsd">

<namingService name="Cos" host="127.0.0.1" port="14021"/>
</discoveryService>
but the reports service don´t work "http:localhost:9002/reports/rwserver/getserverinfo" don´t run and crash with the message:
"Rep-51002 Bind to Report server servername "
Thanks and sorry for my english.!
Edited by: Adama on 04-nov-2010 17:29

The support notes I find on this are :
New Install of iAS/iDS and Reports Server Fails with REP-50600: Broadcasting Is Disabled. [ID 443448.1]
REP-50600 or REP-51002: Bind To Reports Server Failed and Exception 50125: "Network is unreachable" With Multicasting [ID 577958.1]
REP-50600 Starting Reports Server In Non-Networked Computer [ID 452651.1]
I hope these help
Best Regards
mseberg

Similar Messages

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1

Problems with Mac OSX 10.5.2 and installing my pro tools le 7.1.1.
My garage band & reason software don´t open anymore giving me a error messasge regarding the midi drivers in the operating system.
Please help!!!
Thanks,
Paolo

Somewhere at either Macworld or here I learned that DVDSP 2, DVDSP 3 and now DVDSP 4 "internally" are major re-writes.
Support for HD among a few other items along with QT 7 which comes with Tiger means sincerely that one set of applications/OS is not going to be stable.
Personally I think of all the issues possible its DVDSP vs QT.
Unless you move to DVDSP v4 the alternative is to wipe the disk and go back to Jaguar (10.2) or perhaps Panther but avoid upgrading QT beyond 6. I advocate wiping the disk because I'n not sure an archive and install to down shift to an earlier version of the OS is possible. If it is I'd still worry about mis-matched files in all sorts of locations.

TS3694 good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

good evening i have an problem with my iphone 4 the wif and network cant on now if i tray is showing iTunes i tray to reload the ios is showing an error -1 can you help me

No problem, glad to help!
Update: my PC USB hub was connected to a USB 3 port, I connected the 30 pin cable directly to my PC, And the restore worked just fine. Restored phone from iCloud backup and seems to be working fine.

Hi I've a big problem with adobe acrobat reader XI pro and I hope you can help me. The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reade

Hi
I've a big problem with adobe acrobat reader XI pro and I hope you can help me.
The problem is; when I past copied text from some pdf books (not all of them) it past symbols only! wherever I past it! and even if I coped that text from another pdf reader (adobe pdf reader, internet browsers, ...etc.).
This problem started to happen since yesterday when I installed adobe acrobat reader XI pro to try it before I buy it, and before that when I was using the free adobe pdf reader I was totally able to copy any text from any pdf and past it anywhere with nothing wrong.
What can I do?
thank you a lot.

There is no product called Adobe Acrobat Reader Pro. There is
- Adobe Acrobat Pro ($$)
- Adobe Reader (free)
Which do you have? And are you a programmer?

I have a problem with simulation in Matlab 6.5 and LabVIEW for PID controllers

I have a problem with simulation in Matlab 6.5 and LabVIEW. I have some methods for granting PID controllers in MATLAB to go but not LabVIEW. International Teams degree to transfer two but when I go past the fourth degree no longer work. We changed the formula for calculating the parameters for grade four and gave me some good values for Matlab award but when I put on LabVIEW have not settled. formulas are available in PDF and are. Please help me and me someone if possible. Thanks
lim.4 generation parameters in MATLAB program and comparison methods are for second-degree transfer function.
Solved!
Go to Solution.
Attachments:
Pt net.zip ‏2183 KB

This is the VIs what i try to make,but is not work. This pdf. document was used to create last VIs PID. thenk you for your colaboration.
Attachments:
PID create by me.vi ‏312 KB
tut_3782.pdf ‏75 KB

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years, I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months

I have a problem with the synchronisation of my iPhone and iPad with Outlook 2007 on my 64-bit Windows 7 PC. For several years,
I have had no problems with the synchronisation by cord connection and iTunes between these programmes. However, a few months ago I decided to use Mobile Me. However, there were problems with duplication of calendars and then “rogue events” – which could not be deleted – even if deleted on Outlook and on the iPhone (or both at the same time) – they would just reappear after the next synchronisation. All other synchronisation areas (eg Contacts, Notes etc) work fine.
I have looked for help through the Apple Support Community and tried many things. I have repaired my Outlook. I have repaired my .pst file in Windows. I have re-installed the latest version of iTunes on my PC. I have re-installed the firmware on my iPhone. I have tried many permutations on my iPhone. I have closed down all Mobile Me functions on the iPhone. I have spent upwards of 24 hours trying to solve this problem.
What am I left with? Outlook works seamlessly on my PC. My iPhone calendar now has no events from my calendar, but does not synchronise through iTunes. Nor does it send events initiated on the iPhone to the Outlook. I am at the point of abandoning iPhones and iPads altogether. I need to have a properly synchronising calendar on my phone. Do you have any suggestions?

In the control panel goto the "Lenovo - Power Manager" and click the battery tab, there is a maintenance button in there that will let you change the charging profile for your battery. (from memory, so exact wording may be off)
The lower the numbers you use there, the longer the battery *should* last. These batteries degrade faster at higher charge levels, however storing them at too low of levels is also not good for them... I've read that 40% is optimal, but just not realistic if you use your computer.
--- ThinkPad T61 / Win 7 / Core 2 / 4gb RAM / Nvidia / Still used daily --- ThinkPad Edge 15/ i5 / Win 7 / TrueCrypt / 8gb RAM / Hated it, died at 1 yr 1 mo old --- ThinkPad T510 / Win 7 / TrueCrypt / i5 / 8gb RAM / Nvidia / Current primary machine --- ThinkPad X220 / i7 / IPS / 4gb / TrueCrypt / My Road Machine

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

I am having a problem with my cs6 running very slow and when i save i am getting an error message that says, "This document is bigger than 2 gb (the file may not be read correctly by some TIFF viewers.) please help

wen6275,
It looks like you're actually using a camera or phone to take a photo of your monitor.
That's not what is commonly known as a "screen shot".
It looks like you're on a Mac. Hitting Command+Shift+3 places a capture of the contents of your entire monitor on your Desktop; hitting Command+Shift+4 will give you a cross-hairs cursor for you to select just the portion you want to capture.
I'm mentioning this because I fear I'm not construing your original post correctly when you type "I am working with a large files [sic], currently it has 149 layers, all of which are high resolution photographs", so I'm wondering if there's some similar use of your own idiosyncratic nomenclature in your description of your troublesome file.
Perhaps I'm just having a major senior moment myself, but I'm utterly unable to imagine such a file. Would you mind elaborating?

TS3899 With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this pro

With Yahoo Mail, and anotare account (Inacap Mail), I can only receive mails but I can't send emails. I don't know if this is a problem of the iPad or it is a problem with yahoo mail, because using Gmail and the email of my job I don' have this problem.

Google them to confirm the settings that you need for the outgoing server, then check the setting you entered on the pad. Pay real close attention to the outgoing server name, and port. You may need to change in on the pad.

Have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture. The Apple icon, usually at top left corner, appears in to

have a problem with my MacBook Pro.5,3 and monitor. Intermittently, the desk top screen becomes broken up into vertical sections, which appear in the wrong order, creating a haphazard picture.
The Apple icon, usually at top left corner, appears in top right corner in a strip including all that left hand. When the computer is restarted, the screen goes back to normal. But I have to move the mouse to the far left of the screen and then up until it reappears on the far right hand side of the screen so that I can hit shut down button.
It seems to happen randomly though always on desk top and sometimes when I move mouse and computer switches on from rest mode. My large flat screen is relatively new.
The video card on this computer, which is approximately two years old, is Nvidia FeForce 9400M.
Any help would be welcome as my usual source of assistance is not available and I am not well versed in workings of the Mac although I have used one for many years.

That sounds like a Hardware problem.
You may be able to confirm that with Apple Hardware Test, or make an appointmenst for a free Genius Bar evaluation.

Problem with changing Label in Bridge CS3 and CS6

Hi there,
I am having some problem with changing Label in Bridge CS3 and CS6 in windows.
1. In Bridge CS3 (Windows XP), most of the time with most of the files, there is no problem. But I found that in some files, the Label does not get changed. I usually change Label by right clicking on the picture, then Label and select any Label. When I do so in those files, nothing happens. But when I rename the file by changing or adding just a single character, then it works. And if I again rename to original name, it still works. But without renaming the Label does not change. Again this does not happen with all pictures, but occationally with some. We usually receive pictures from different clients for editing purpose.
2. In Bridge CS6 (Windows 7), if you create lot of Path using Pen tool in Photoshop for the purpose of removing background, you save the file, close, and change Label in Bridge, again open the file in Photoshop, you see no Path in the Path Pallette. So that means, changing Label works, but it removes the Path from the file. But if there is small amount of path, then no prboblem. But if there is lot of path, like you need to create for a necklace to remove background, then the problem arises.
I am using Bridge for a purpose where it is very helpful so I really need to use Bridge, and Labeling feature is the most important to me, but after feaguring out this problem, I am really tensed as to whether or not I will find a solution to this. So any help, guidance will really be appreciated.
Thanks very much in advance for any solution.
Best regards

I have re-checked the issue and I found that the problem is with JPG file.
I wasn't even aware you could save a path to a jpeg file (always use PSD because of wanting to keep the Alpha Channel, jpeg only can contain 1 layer and no alpha channels and/or transparency).
However I tried it on a file with a simple path and one with a complex path. It seems indeed you have found a bug. The simple path is no problem but the more complex path is indeed disappearing.
It is not only label but also rate or adding IPTC in the description field. The moment metadata is saved to this jpeg file and reopened the earlier present work path of a more complex path is gone.
Despite the fact that to my opinion a jpeg is not the most suitable file format for saving a work path this should not happen. If a work path is saved to a jpeg then it should be kept saved after just altering metadata in Bridge.
It still is the same behavior in Bridge CC because that is what I use. Don't know when it started but it still needs to be repaired
Here is the link for filing a problem or bug:
http://feedback.photoshop.com/photoshop_family/

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

Does anyone still have problems with Premier Pro on Maverick? and is there any known fix?

I know OSX 10.9 Mavericks introduced a power saving feature called App Nap which is meant to slow down applications that it determins are inactive (or when minimized). This would mostly likely cause problems if you're dynamically linking After Effects comps to your timeline or sometimes exporting to Media Encoder.
Try disabling App Nap for all your Adobe App files...
Go to your Applications folder
Go into individual Adobe app folders (ie. Adobe Premiere Pro CC)
Right-click on the Adobe app file (ie. Adobe Premiere Pro CC.app) and select Get Info
When the info window opens up, add a checkmark beside "Prevent App Nap"
Restart the application
This fixed all my performance issues.
-Pete

What is the problem with Itunes 11.0.1.12 and adding music to the Library?

What is the problem with Itunes 11.0.1.12 and adding music to the Library? I had no problems when I updated, just had to get used to the new format and appearance. Added a few albums here and there, and then today I can't get anything in the Library. I've always just dragged and dropped my music with no problems. I've had an Ipod for the last six years and never encountered any big problems with Itunes or my various Ipods.

Why is this Itunes such a pile of junk? If I restart my computer I can sometimes find the recently added music in my Itunes Library.
It would be nice to know if other people are having the same problems.

Problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) .

Hi experts
I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
The rule type is direct assingment and there is no routine .
Any clues.
Thank you.

holy devilz wrote:
Hi experts
> I am having problem with the fiells MEINS(PO Unit ) and MENGE(Quantity) of the datasource 2lis_02_acc .
>
> I have created custom cube and have mapped the fiels MEINS to infoobject 0PO_UNIT and MENGE(Quantity) to infoobject 0CPQUAOU.
> Now the data is successfully loaded in the cube but the values of the above 2 fields are getting changed.
> In r3 the value for MEINS is "AU","EA" , "H" etc but this field value is getting converted to "LE" in the cube and also the field MENGE(Quantity
> ) in r3 is for example "1" it is getting converted to 3 in the cube. do u have any idea what is the problem.
> The rule type is direct assingment and there is no routine .
> Any clues.
> Thank you.
Hmm, your system should consider the alternative UOM maintain in the material master.
Each material in SAP has its standard, base unit of measure (stored in MARA-MEINS). To allow using alternative units, those can be maintained per material in table MARM. So, assuming the Base UoM is only considered (for LE), it converts material quantity from one unit to another, most likely from alternative units to the base one. So, changing that settings must solve. http://goo.gl/JuZlm
Alternative steps:
1.Goto MM42 (Assuming there's no BAPI req?)
2. change po unit from basic unit to other -> save OK
3. change po unit from other to basic unit -> save OK
Also, MD63 shows all data in the base unit of measure.
If you want to explore basic steps, goto RSD1 > Additional > Alternative UoM.
Best Regards, @{

Hi there, I have a problem with my iphone3g. The '*', '0' and '

Hi there, I have a problem with my iphone3g. The '*', '0' and '#' dont work on the keypad when i try to umlock my phone? When I swipe across the screen its fine, but when I try to enter passcode, it wont let me as the passcode has a '0' in it =/ this happened out of the blue and dont know what could have caused it to happen?? Can anybody help me please?

Try restarting your phone while you hold down the power AND the sleep button at the same time.
This defenitly is a software bug and normally there should be this button.

Problems with "no color" in the "Fill and Stroke"

I am having problems with “no color” in the “Fill and Stroke” function of Flash CS4 Pro.
I had been using CS4 for 10 days and everything worked fine. Then I tried experimenting with various color combinations (along with “no color”) for “Fill and Stroke” for a simple button. Suddenly CS4 locked up on me while I was working with the “color panel”. A second color panel appeared in the upper left corner and the program was not responding. All I could do was to end the CS4 task.
After that, whenever I created even a simple rectangle, at first the colors would appear as indicated for “Fill and Stroke”, but when I selected the object to see its properties, either the stroke or the fill color box would have a red slash line, indicating a “no color”, and I couldn’t select the color box to change it using the ink bottle tool, although the other box worked fine.
Rebooting did not help. So I uninstalled CS4 (and didn’t keep the preferences), rebooted, then reinstalled it. The problem was still there. Logging on as another user didn’t help. I tried restoring the Windows system to before I installed CS4 and resinstalling it and that didn’t work. I have a disfunctional CS4 now and I don’t know what to do to fix it. Please help me. Thank you.

Have you updated flash to 10.0.2? Have you played around with a bunch of different selections, objects, and so forth to see if this box is always incorrect? I think there's some particular selection (order of selecting things, and so on), where the color swatches in one location don't work as expected. However, it should not happen all the time and from what I recall it was fairly easy to work around (I can't even figure out what this was - so probably not it, as it seems hard to run into or perhaps now fixed).
Also make sure you have the stroke selected - if you don't have everything selected, either the fill or stroke will show no color and dim depending on the selection.

Problems with OFM 11.1.1.1 and OFM 11.1.1.2

Similar Messages

Maybe you are looking for