Problems with Old and New Appraisals (switch HAP00 / REPLA)

Hello Experts,
I'm working on a HCM Global implementation and my country is joining now, and there are others countries that have already been there since 2002.
Through of switch HAP00/REPLA (transaction OOHAP_SETTINGS_PA), it is possible enable the use of Appraisal Systems subcomponent (Old Version) or Objective Setting and Appraisals subcomponent (New Version).
The others countries are using the Old version and we need use the New version.
When I activated of switch to flag u201CXu201D and after I tried create appraisals to employees through transactions APPCREATE or PHAP_PREPARE_PA, I could see only the new appraisals forms templates that Iu2019ve created through transaction HAP_CATALOG_PA and I could not see the old ones that I created through transaction OOB1.
After this problem I have tested activation of switch HAP00/REPLA and the screen in infotype 24, tab Appraisals where appraisee changed after the switch was activated, in other hands all the Appraisals on tab u201CAppraisals where appraiseeu201D disappeared and the columns are totally different comparing to old version.
My question is how can I activate (flag X) the switch HAP00/REPLA and without losing the existing Appraisals on TAB u201CAppraisals where appraiseeu201D in Infotype 0024?
Thanks in advance

Hi Lima,
The old appraisal system only supports appraisal templates with object type BA where as the new template uses object type VA. It is therefore you cannot view both of the appraisals in one tab 'Appraisals where Appraisee' or 'Appraisals where Appraiser'.
I suggest either use new or the old appraisal because by the time you run APPCREATE report for creating appraisals, the SAP systems queries the table OOHAP_SETTINGS_PA to identify which appraisal system is used. Based on the selection made in this table, the system opts for the settings.
I've went through your issue but cannot find the solution to it. It seems to be impossible.
Thanks,
Irfan Malik
SAP HR Consultant
SIEMENS Engineering Co. Ltd Pakistan

Similar Messages

Problems with xfi and new logitech z5300 speak

Hello,
I just upgraded my speakers to Logitech z5300e's from my old set of Creative 5.'s. I am using an XFI soundcard that I have had no problems with in the past; it worked flawlessly with my old Creative 70 watt 5. speakers.
The new speakers do not get sound from the center channel in entertainment mode. Using the speaker test in the creative console, the center channel output comes from the right front speaker--and the right front sound comes from the right rear. Every speaker's output is off by one position. This DOES NOT happen in game mode-the speakers function normally. It only happens in entertainment mode.
I have tried uninstalling and reinstalling the drivers and console/mode switcher to no avail. Logitech tech support tells me that this is a Creative software issue since the speakers work correctly in game mode, but not entertainment mode. Actually, this is my second set of 5300's, I returned the first as defecti've because of the same problem.
Can anyone give me any ideas or help?
The problem goes away if I hook up the old speakers and reinstall the drivers.
Thanks,
Jim

It seems that in Vista bad things may happen if you ever choose a
program to open downloaded EXE files.
This may help with the EXE issue:
http://www.winhelponline.com/articles/165/1/Restore-the-exe-file-association-in-Windows-Vi sta-after-incorrectly-associating-it-with-another-application.html
Aandi Inston

New camera dies Rebel t5i with old and new battery

Camera is 12 months old and the original battery appears as if not holding a charge. After charging, the camera will come on and die when pressing the shutter button to take a picture. I purchased a new battery, charged it and the same happens again. Seems that maybe the old battery may not be dead after all. Could this be the charger or is this a camera issue. If a camera issue where do I go to get this looked at. Bought camera at best buy. You think this caliper camera would last longer than a year???

Are there any third party components involved in charging or using your camera? Did you, for example, add a 3rd party battery grip?
I ask, because just occcasionally we'll get this sort of question where the camera fails to perform as expected but the person seeking help didn't mention the 3rd party component. Once we find out about it and eliminate it from the test... suddenly the camera works fine again.
Canon factory batteries tend to last many years assuming you are using the original Canon charger (I do NOT like to use "fast" chargers as they stress the battery trying to charge it in a hurry and shorten it's life.)
When you insert a freshly charged battery and power it up... does the rear LCD screen come to life and, if so, do you see the battery charge level indicator showing that the battery is full?
This may be a problem with the camera itself and/or with one of it's cut-off switches. There are two micr-switches will cause the camera to immediately power down if they are not engaged. One is on the battery compartment door. The other is on the memory card door. If you power up the camera then VERY SLOWLY open these doors, you should find that you can open them about 1mm and then the camera will power off. If you barely touch the door and the camera shuts down, then it may be that you have a bad switch. Make sure the two doors are undamaged and able to close easily without any obstructions (if they aren't fully closed, it would make sense that your camera spontaneously shuts down.)
You may need to contact Canon service for help as there's no "setting" that would make the camera do this. The T5i is a good camera, but it's just possible you have a problem with yours -- it happens and it's not an indicator of low quality. I bought a new car that had a water pump failure within the first 5000 miles (that was a shock) even though everybody else with the same model car didn't have a problem with their water pump. It happens. Could they increase quality control to the point that it'd be very hard to get a car released with a bad water pump? Well... they could improve build standards, testing standards, and inspection standards... that would REALLY drive up the price tag of that car... and just occasionally they'd still get a bad one anyway. You can never get quality to 100% for any product.
Tim Campbell
5D II, 5D III, 60Da

Is anyone else having a problem with photoshop7 and new snow leopard operating system?

Recently purchased new imac with snow leopard operating system. Installed photoshop 7 successfully (it said anyway) but when I try to open get error message stating "an unexpected and unrecoverable problem has occurred because of a program error. Photoshop will now exit." Help!

John_Levine_IOPHFI_INH wrote:
It may not have been considered a "Major Release," But when the it's the only OS that the machines you are currently building will run, it's pretty freakin' major!
(I'm not sure if Apple's latest machines will still run 10.5, or not, but from following this thread, I'm guessing not?)
It is the standard at Apple... the latest build of the current OS is what goes on the new machines, and the Motherboards, Chipsets, & BIOS (not the right term for it with Mac, I know) are "hard written" to accept that OS as the absolute minimum, and nothing older (or lower as some call it).
So, since the latest machines are coming preloaded with Snow Leopard (10.6.2) that, and subsequent newer builds of OS 10.6 and up is all they can be loaded with.
This is nothing new. It's industry wide in both Mac and PC. Just try to put XP on a brand new Dell, HP, or Gateway PC. Without flashing the BIOS and taking a "more likely than not" chance of rendering most of your hardware undetectable, it just ain't gonna happen.
Conversely, just as Snow Leopard won't run on a PPC powered Mac, Vista and 7 may install, or appear to, on a single core, older PC, but the first time you install and try to open anything other than the OS itself, you're in for a world of problems.
People have tried to fight this for years. In 2005 Mac users went out of their minds when Apple dropped support for OS 9. A year later, it was Windows 98 users freaking out over their beloved OS being "sunsetted". I was skeptical of the move to Intel processors when I first heard about it, having become a full time Mac user, and being partial to AMD before that. But like Motorola PPC processors, AMDs run hot and heat is the enemy. The new machines run faster, cooler, and do more for less money.
It's a major pain for people who don't have the budget for a new Mac (or PC) and still have old software that is perfectly functional, but they are finding more and more incompatibility as they interact with other people and newer systems. Sooner or later though, technology wins and everyone has to either upgrade or drop out. Fighting it is futile. I will always remember the day last Summer when I stopped at a traffic light and next to me was an older, redneck looking fellow in a new brand spanking new Honda Accord. It may have even been a hybrid, I don't know, but duct taped on his dash was what had to be a thirty-five year-old 8-track player with a bunch of wires coming out of the back, also taped to the dash, and running to a pair of 6 x 9 speakers, which were just laying on the dash (no duct tape). I had to wonder why he bothered to buy the latest in automotive technology and yet he was stuck in a time warp for his stereo. Don't Hondas come with some pretty decent CD stereo units? And where can you find 8 track tapes anymore?

Sync applications problem with 3GS and new computer

Hopefully someone can help me out. I am trying to sync my fiancee's 3GS to our new Dell laptop that has Windows 7. I had no problem syncing and updating my 3GS with the same computer last night, I updated to the 4.0 last night on my phone. I then tried to update her phone. It asked me to backup and sync all data prior to updating. I was able to back up and sync contacts and photos without a problem. I tried to transfer the applications; and now I keep receiving this message: "Some of the purchased items on iPhone could not be transferred to your iTunes library because you are not authorized for them on this computer." I certainly authorized the computer; thinking that might be the problem, I deauthorized and reauthorized the computer successfully (It says that I have one out of 5 possible computers authorized). That did not solve the issue. I researched into the topic; and now my brain hurts. One of the threads requested to disable the automatic sync when the iPhone is connected to the computer. I reset the settings, powered down the iPhone and exited out of iTunes; rebooted and still no success. I am getting frustrated but do not want to erase all of her applications and buy them again. This message is applying to both free and purchased applications. When I look at the applications page on iTunes; all of her program icons are apparent. I am not an iPhone genius, but I read that the new computer has never recognized the phone and the sync will go from computer to phone (if I understood correctly). Does that mean I need to reinstall iTunes and start from scratch with this computer; or is there a solution? Both of our phones were rarely synced with our old laptop; but I worry that syncing with that computer will only further complicate the situation. Without transferring the applications, I am hesitant to update the phone to 4.0 and the new carrier settings. Do I just let the computer try to transfer the applications it allows and then lose my apps and do the update? I don't want to do that unless that is my only choice. Please help me!

Not sure if this helps, but:-
I just got an IPhone4 - Gave My IPhone3 to husband.
We ended up hsving to set up two login users on the PC (not sure how to do that) and then two seperate ITunes accounts, one for each of us.

To recover a database with old and new datafiles.

Hi;
Please Give a Solution for the following problem.
First I shutdown the databae.
Copy all the redolog,control file and Datafile except one.
One datafile i miss at the time of copy.
Then I start the database and do some transactions.
At that time my system tablespace has been corrupted.
So i copy the old backup and overwrite with the actul file.
So one file backup is not there, that i forgot to take.
At the time of opening the database it shows that datafile version is higher than the controlfile.
Now what i did is came to mount stage and type the following command.
ALTER DATABASE DATAFILE <FILENAME> OFFLINE DROP;
After that i open the database.
Now the problem is that missing file contain very important data.
Is it possible to recover the data?
Please give me an immediate solution.

Is the database running in archive log mode? Do you have any export dump files for the data in question?

Big problems with CS4 and new computer!!!

System information: This Computer
CPU Manufacturer: GenuineIntel
Number of CPU: 1
Cores per CPU: 4
CPU Type: Intel Core i7 920 @ 2.67GHz
CPU Speed: 2674.4 MHz
Cache size: 256KB
O/S: Windows 7 (64-bit)
Total RAM: 12279.1 MB.
Available RAM: 10447.6 MB.
Video settings: 1920x1200x32
Video driver:
DESCRIPTION: NVIDIA GeForce GTX 260
MANUFACTURER: NVIDIA
BIOS: Version 62.0.4c.0.1
DATE: 9-27-2009
Drive Letter: C
Total Disk Space: 279.5 GBytes
Cluster Size: 4.0 KBytes
File system: NTFS
I very grateful if some could help me!
Sami Malmberg
[email protected]

Sami,
Thanks for the file and the screenshots. A couple of remarks.
Try to update your BIOS. You currently have version 05.04. There may be a newer version available, although the file date is 05/19/2009, so it may be current. Just check it please.
You have ASUS Six Engine running. I would disable that from starting. I never found a use for it, I prefer to use my own judgement.
Here are your results in comparison to my score, while running at a clock speed of 3441 MHz, so about 30% faster.
As you can see, your CPU results are in line with mine, considering the 30% difference in clock speed. The same applies to your memory mark, nothing wrong with that either. You did not test the CD speed, and that can lead to a lower PassMark rating. Rerun the test with a CD or DVD in the drive. That may help.
Your video card is causing serious problems. The speed of the video card is not really CPU clock speed dependent. Your results are very disappointing. First thing to check is whether you have the latest drivers. Your 2D Graphics results are about 1/3-rd of my results and the 3D results are about half of what I achieved. This is rather surprising, since I would have expected the nVidia card to be much better than shown here.
Your disk results are disastrous for the final benchmark result, but on the other hand, not unexpected. Your results are done on a single disk in comparison to my 12 disk array, which is around 10 times faster, even with parity calculations.
To summarize, your video card is the big bottleneck here. Check for new drivers, altough based on the date of the drivers, it seems unlikely there are newer ones. An alternative might be to temporarily reduce your screen resolution and rerun the test while using something like 960 x 600. This will possibly lead to a higher score, although that is faking it a bit.

BB DESKTOP SOFTWARE STOPPED WORKING WITH OLD AND NEW PHONE

Im running 10.6.8 on my Macbook pro. The problem started with previous Mac already. The BDS starts up, connects with phone but can not backup, restore or update phone. Get the following error msg. "DBS failed, device could not be backed up. This started on my previous mac already, older version of software.
I uninstalled, re-isntalled the software many times and in the end thought it must be by phone - BB9700. Now on new phone BB9900 and same problem. Tried again re-installing the software, dumping all prefs etc - no luck. i installed the software on a different Mac at the office running same software and the phone backed-up, no problem.
can anyone help. what can i try.

I guess that you are using the latest software available for BDS.
From what I see there, this could indeed come from a corrupt file on your MB Pro.
I would suggest to uninstall completely the BDS software and to be sure that all related files have been deleted too. This is probably the most "challenging part". If I remember correctly there is an uninstaller provided with the disk image, so use this one and then search for any other BDS file using Spotlight or the shareware "AppZapper" which is used to delete all files related to a specific software at once!
If you say that it is working perfectly on another computer, the phone is not the cause of the problem logically.
A good idea is also to repair the permissions on your Mac starting up from the original DVD and using the disk utility software. This will help your Mac anyway
Hope this helps.
Please don't forget to mark as "solved" if your question is replied and to "like" a useful reply to your post ;-)

Problem with Itunes and new Macbook Pro

I just purchased a Macbook Pro, my first Apple computer ever though I have other Apple products (iPad, iPod, iPhone). All of my iTunes music and playlists are on my Dell PC at work. My hope is to transfer my music to my new Mac (at home) so that I have more room for actual work items on my computer at the office.
I had no trouble transferring the songs (via my iPod) the songs are there but the playlists are not listed on my new computer (the Mac). Is Mac compatible with making playlists in iTunes and if so how can I get those lists back other than paistakingly creating all 45 play lists one by one again?
Thank you in advance for your help.

Do you have an external hard drive? If you do, connect the drive to the PC. Copy the iTunes Folder and all the media and various library files it contains from the PC to the drive. Connect the drive to the Mac. Copy the folder and replace the folder on the Mac in your Home > Music with the one from the PC. Start iTunes and it will now be pretty much identical to the one that was on the PC. Caution: If you have put things on the Mac that were not on the PC then you will need to change the process a bit.
Some information:
What are the iTunes library files? - http://support.apple.com/kb/HT1660
More on iTunes library files and what they do - http://en.wikipedia.org/wiki/ITunes#Media_management

Having a problem with PEAP and Cisco 2960 Switch

Hi All,
    I am attempting to use PEAP with a LDAP backend on FreeRadius witht he MS Supplicant. I have it all working, in debug on the Radius server I see it sending all the information, the tunnel, medium etc. but with PEAP the Cisco switch is not changing VLANS. If I install the Cisco or Juniper client it works just fine if I use eap-mschapv2 but peap-mschapv2 does not switch the port to the right vlan. Is there something extra on the switch I need to do to allows PEAP or is there something on the FreeRadius?
    The only difference between the PEAP and EAP versions that I can tell is that the PEAP authenticates ands the information is sent once(according to the debug on the Radius server) where as with the EAP the connection information is sent several times, that is I will see the Tunnell and medium info sent more then once in the Radius log for just one login.
Any ideas?

Thought I mentioned the client in the first post, I am using the 3 different types of clients with a goal of getting the MS client to work. I am using the Juniper Odyssey client, Cisco CSSC client and the MS built-in client. I mentioned the EAP-MSChanpV2 because I tested that login so I could compare the Radius output with that of PEAP-MSChapV2. I did not release logs from the Radius server because it seems to be centered with something on the switch changing Vlans but if you want output I can give that..
CSSC Client pops out:
14:25:08.453 Network Connection requested from user context.
14:25:08.468 Connection authentication started using the logged in user's credentials.
14:25:08.468 Port state transition to AC_PORT_STATE_CONNECTING(AC_PORT_STATUS_STARTED)
14:25:08.796 Port state transition to AC_PORT_STATE_UNAUTHENTICATED(AC_PORT_STATUS_8021x_FORCED_UNAUTH)
14:25:09.828   Port state transition to AC_PORT_STATE_AUTHENTICATING(AC_PORT_STATUS_8021x_ACQUIRED)
14:25:09.843   Identity has been requested from the network.
14:25:09.875 Identity has been sent to the network.
14:25:09.890 Authentication started using method type EAP-PEAP, level 0
14:25:09.890 The server has requested using authentication type: EAP-PEAP
14:25:09.890 The client has requested using authentication type: EAP-PEAP
14:25:09.968 Profile does not require server validation.
14:25:10.031 Identity has been requested from the network.
14:25:10.031 Identity has been sent to the network.
14:25:10.046 Authentication started using method type EAP-MSCHAP-V2, level 1
14:25:10.046 The server has requested using authentication type: EAP-MSCHAP-V2
14:25:10.046 The client has requested using authentication type: EAP-MSCHAP-V2
14:25:10.078 Port state transition to AC_PORT_STATE_AUTHENTICATED(AC_PORT_STATUS_EAP_SUCCESS)
14:25:10.078 The authentication process has succeeded.
*************************Raidus Ouptut for PEAP:**************************
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for anonymous
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
rlm_ldap: object not found or got ambiguous search result
[ldap] search failed
rlm_ldap: ldap_release_conn: Release Id: 0
[pap] WARNING! No "known good" password found for the user. Authentication may fail because of this.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.9 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
[ldap] performing user authorization for RadiusUser
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user RadiusUser authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.8 seconds.
Waking up in 0.7 seconds.
Waking up in 3.7 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
**************************Radius ouput for EAP******************************
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.7 seconds.
Waking up in 0.7 seconds.
Waking up in 0.1 seconds.
Waking up in 3.7 seconds.
Waking up in 0.1 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
Ready to process requests.
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
[ldap] performing user authorization for Radiususer
rlm_ldap: ldap_get_conn: Checking Id: 0
rlm_ldap: ldap_get_conn: Got Id: 0
[ldap] Added the eDirectory password Whatever in check items as Cleartext-Password
[ldap] No default NMAS login sequence
[ldap] looking for check items in directory...
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 == "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 == IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 == VLAN
[ldap] looking for reply items in directory...
rlm_ldap: radiusServiceType -> Service-Type = Authenticate-Only
rlm_ldap: radiusTunnelPrivateGroupId -> Tunnel-Private-Group-Id:0 = "SomeVlan"
rlm_ldap: radiusTunnelMediumType -> Tunnel-Medium-Type:0 = IEEE-802
rlm_ldap: radiusTunnelType -> Tunnel-Type:0 = VLAN
[ldap] user Radiususer authorized to use remote access
rlm_ldap: ldap_release_conn: Release Id: 0
Waking up in 0.9 seconds.
Waking up in 3.9 seconds.
Ready to process requests.
Hope that Helps.

Problem with CDATA and new line character

I parse a xml document with org.w3c.dom, the document contain a CDATA section in which there are more lines of text, each line is terminated with the new line character (\n).
Example:
<nota>
<[CDATA[
first line
second line
third line
]]>
</nota>
When a parse this node:
Text txt_nota=(Text)elm_nota.getFirstChild();
String nota=txt_nota.getData();
the value returned is one string with no new line characters, example:
"first linesecond linethird line"
what's wrong?

Because i use the string nota into a jsp page and i print the string nota into a textarea and the text is with no newline, example:
<textarea name="nota" rows="4" cols="60"><%= nota %></textarea>
the text into textarea is:
first linesecond linethird line
but i want that the text displayed into textarea is equal the text into the CDATA section:
first line
second line
third line

Best Airport Extreme Wireless Radio Mode with Old and New Macs and PC

I'm running Airport Utility 5.3.2 and am running / connecting to the Internet with a new Airport Extreme 802.11n Gigabit Ethernet (the new squared off one) with "Version 7.3.2".
In addition to my new MacBook Black (which has 802.11n, I have two other older Maxs that run 802.11b/g (and also a PC that has 802.11.b/g/n).
Currently, the Airport Extreme's "Wireless" "Radio Mode" is set to
802.11n (802.11b/g compatible)
But, reviewing the Radio Mode menu, I see there are a number of choices that seem "faster" - 802.11n only (2.4 GHz), 802.11n (802.11a compatible) and 802.11n only (5 GHz).
Can I set the Radio Mode to any of these other settings and still have my older Macs (and the PC) connect to the internet using this Airport Extreme? Or, do I have to leave my Airport Extreme Radio Mode set to what appears to be a slower speed 802.11n (802.11b/g compatible) setting to allow others to use this Airport Extreme Base Station?
FWIW, I do have an older Airport 802.11g version 5.7 still connected and set up and the older computers can / could connect through that. However, I was hoping to give that one to a friend for their use elesewhere and wanted to have only one Airport Extreme set up at my house.

"you'll use N+B/G at 2.4 GHZ."
I guess you means that I should continue with my current setting on the Airport Extreme - which is "802.11n (802.11b/g compatible)" - if I want all my computers to access the web via the Extreme. Correct?
I'm too much of a novice to try a "bridge" mode setup.
However, your suggestion (I think) "It would be more reliable and faster speed if you could connect both routers to using ethernet" does give me hope.
My Verizon Fios modem is actually a router. Indeed, I have my TiVo box connected to the Fios modem/router.
If I connect BOTH of my Airport Base Stations to the Fios modem/router and then do the following:
(1) set the newer "Extreme" Base Station to "802.11n only (5 GHz)" and
(2) keep the older Base Station (running 802.11g) as is
then my (and others') newer computer(s) with 802.11n can connect at high speed via the Extreme and older computers can still connect using the older Base Station.
Correct?
Message was edited by: JoeS

Problem with Fotomagico and new iLife Media Browser

I installed the new iLife Media Browser as part the Apple software Update several days ago. I use Fotomagico, which uses the media browser. After installing the new browser, Fotomagico no longer sees photos- it can browse the directories in iPhoto but can't see the actual photos (blank boxes appear with file names) and I can't select them.
Is there some way to uninstall the new browser? On my wife's Mac, I did not install it after seeing what happened on mine, and Fotomagico still works fine there.
Help! I'm in the middle of a project with a deadline! I've contacted Boinx Software also but they are taking their time.

Do you use Time Machine? Apart from wiping the HD and starting over there’s no other way to go back.
But try repair permissions first.
BTW
it can browse the directories in iPhoto
What version of iPhoto are you using?
Regards
TD

Problem with Itunes and New

Hello,
Can anyone offer me advice how to effecti'vely transfer a (protected I tunes (MP4) file to my Creative Zen? I followed the instructions as Creative has offered, yet I receive a message stating that my player does not support the file.
Thanks

The Apple MP4 is not supported on the New Zen because the .MP4 file is encoded using H.264 compression.
The Zen supports DivX and XVid .AVI video based on the mp4 video compression. You will need to convert your videos to DivX AVI or WMV which are supported.
These explains it better
http://en.wikipedia.org/wiki/Divx
http://en.wikipedia.org/wiki/H.264
Some people reported using Super http://www.erightsoft.com/SUPER.html#Dnload for the conversion.
Also ensure that your videos are no larger than 320x240 pixels.
As for Audio, only MP3, WAV and unprotected AAC are supported.Message Edited by eddy2099 on -0-200705:00 PM

Problem with itunes and new ipod HELP!!

i've had my ipod for two weeks now and when i connect my ipod to my computer, the device bar does not appear in itunes. i tried restarting my computer, reinstalling itunes, i don't know what to do next. help?!!

Try these basic troubleshooting steps to eliminate a software issue.
Check out the new remodeled MacOSG website! 24-hour Apple-related news & support.
 MacOSG: An Apple User Group  iTunes: MacOSG Podcast  Follow us on Twitter: MacOSG

Problems with Old and New Appraisals (switch HAP00 / REPLA)

Similar Messages

Maybe you are looking for