Problems with Old version of iTunes!!!
After finding out that my AOpen DVD drive is not compatible with ITunes version 6, I downloaded version 5 from oldapps.com. When I try to play a song or burn a cd, it tells me that my computer is not authorized. After authorizing it, a message says: "This item (song) requires a later version of ITunes to purchase". Of course I've alreay purchased these songs and simply want to play or burn them. Also, I have not authorized my songs on any computer but mine. Is there anyway to play and burn songs I've recently downloaded using an old version?
DON'T UPGRADE!!! If you have seen any of the discussions regarding 7.5, and there are too many to count, you will know why. I avoided upgrading, the whole "if it isn't broke" theory, until I tried purchasing some new music and I was prompted that I had to upgrade in order to get the new music. I upgraded and now I can't burn the music I purchased. Trying to burn causes my computer to "crash". I've spent countless hours trying to figure this out, and frankly I'm afraid to connect my iPod for fear of what will happen to that. Read through some of the discussions regarding 7.5, I think you'll choose not to upgrade.
Similar Messages
-
how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version
how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version
-
Serious problem with old versions of sub-vi's installing on application upload
Hi
I am having a series problem which is proving wildly frustrating.
I have recompiled an application but when I upload it on the host computers the host computers seem to upload old versions of the code even though they have been deleted.
I smell a Windows Cache problem but can't see how to get round it.
Anybody have any ideas. If not should I shoot myself before or after I get fired?
Either way help appreciated
AshHi Ashley,
I've been compiling and deploying LabVIEW applications for a long time, and never seen a windows-cach problem!
Here are a few (of my) mistakes that resulted in execution of old code:
Forgetting to update the Top-level VI in the .bld, after the top-level VI's location changed.
Compiling to a different location than the one I copied the "new" EXE from.
Compiling with Installer option, then switching-off Installer option (for faster compiles), then, post compile, instead of copying new EXE - doing an Install and installing old EXE!
After copying or installing new EXE to host, forgetting to update menu-options and "shortcuts" - which still point to old EXE.
Some ideas:
Write a new/unique version# to the Main VI's Window Title (VI properties), so you can tell quickly which version is running.
After compiling, pay close attention to the creation time of the "new" EXE to be sure it is new.
After copying or installing, launch the new EXE by double-clicking on it (don't trust existing shortcuts.)
Cheers!
"Inside every large program is a small program struggling to get out." (attributed to Tony Hoare) -
Serious problems with latest version of iTunes 12.1.0.71
After updating to the latest version of iTunes 12.1.0.71,my ipad mini is not being picked up by itunes even though its showing its connected and i can see it Explorer under My Computer!Even third party programs like Tong Bu assistant aren't working anymore.I have tried reinstalling and switched my device on and off multiple times.Please help...
the1212 wrote:
After updating to the latest version of iTunes 12.1.0.71,my ipad mini is not being picked up by itunes even though its showing its connected and i can see it
This doesn't make sense. Your statement "even though it's showing its connected" means that iTunes does see the iPad. Or am I misreading what you are saying?
Go through the troubleshooting steps in here.
iPhone, iPad, or iPod touch not recognized in iTunes for Windows - Apple Support -
In old version of FCPX I could easily edit in proxy mode which i found to be a quicker way of editing...all i did was goto preferences and click on playback tab and change it from original media to proxy...and i could go right into editing, and when i was finished before i would export my project i would switch back to original media...then i would export my project. Now i'm having a hard time accomplishing this on the newer version fcpx 10.1.2. Somebody please help me....thanks in advance!!!
Click the triangle at the top right of the viewer and choose proxy or optimized/original as appropriate.
-
Problems with newest version of itunes
Hi,
Now that I've updated to 7.41 my computer is telling me that it cannot access my library because it was created by a newer version of iTunes. What gives?YEAH! When I click on iTunes, A pop up says "The iTunes Library file is locked, on a locked disk, or you do not have write permission for this file." ?!?!
What happend?! -
Problems with latest version of iTunes
When I launched iTunes last night, I was prompted to download the new version. Now, when I attach my iPod(60GB Video), its not recognized by iTunes, but is recognized as a storage device by Windows.
I tried to download iTunes again and reinstall, but received an error message.
HELP!Unfortunately, there is no one ‘Silver Bullet’ answer for this issue. Many things can contribute to the problem. Here are various ‘generic’ solutions that you can try in an effort to correct your problem. One should work. These are listed in simplest to more involved order (usually).
First, make sure that the iPod is fully charged.
Try Resetting Your iPod while it's connected to the computer.
Hold down the Menu and Select buttons until you see the Apple logo (or Menu & Play/Pause in older models).
This will often get it recognized. It may take several attempts.
Try closing and re-starting iTunes. There have been cases where iTunes refuses to see an iPod, but after re-starting, it works again.
Also try re-booting the entire computer. Especially if the PC has been operating for a long time &/or many programs have been opened and closed, repeatedly.
Other USB connected peripherals may be the cause as well. Try removing all connected USB items and attaching the iPod. If you have a USB keyboard, it may be worth a try using the adapter to convert it to non-USB. If the iPod connects, continue plugging things back in until you have the problem return. You may have then isolated the issue. Sometimes it could be a printer, camera, Flash Card reader, or other attached device causing a conflict.
If your iPod shows up in Explorer under 'my computer' try changing the drive letter:
-- Click on Start=>Control Panel=>Admin Tools=>Computer Management=>Disk Management
-- Right-Click on the iPod and select “change drive letter”
-- Choose something further along in the alphabet that is unused (Usually, “M”, “N”, “O” or something similar)
-- Safely eject the iPod
-- Reboot the PC
If that doesn't work, Put Your iPod into Disk Mode then plug it in and you should be able to Restore the iPod
Your PC may have difficulty with the USB2 protocol and the iPod. See this Article for a possible solution: iPod not Recognized Correctly
Also try these hints (and the other suggestions above) from any other USB port you may have on the PC. Sometimes switching USB ports can make all the difference.
Try using another PC if you have access to one. Even a Mac may help. Try Restoring it on the other computer and moving it back to yours.
Also See:
Your Windows PC doesn't recognize iPod
iPod does not appear in iTunes or on the desktop
iPod appears in Windows Explorer but does not appear in iTunes“Strange iPod Behavior within Windows” -
1.adobe flash in crashes
2.which version of firefox is the best for me?1.adobe flash in crashes
2.which version of firefox is the best for me? -
Hello, I want to download a new version of Itunes on my windows-7-PC to to communicate with my Ipad, but the program says: I must terminate this download. Since I have also removed the old version of Itunes, now I can't do nothing to communicate with my Ipad
figured it out myself; saw the solution with similar problems...Thanks
-
Old version of itunes to help with burning issue.
I first downloaded itunes about a year and a half ago(Feb of 2005). I cannot remember what version it was. Everything worked fine and burning music cds was a piece of cake. About 6 months later I downloaded a later version of itunes and my problem with being unable to burn cds began (error 2123). I have tried about everything I can think of to fix it. I have posted on this forum before. There have been some people on it that have tried to help but nothing seems to work. I've tried contacting Apple but that's been a deadend street(if anyone knows how to get a real person on the phone at Apple please let me know). I've contacted the drive's manufacturer and they have tried to be helpful but they, as I, believe it's an issue with the itunes software. I think the only way I'm going to get this problem fixed is one of three things. First, try to find a new drive that's compatable. Secondly, find a way to install an old version of itunes without losing everything on my machine and my ipod. Thirdly, stop using itunes altogether. Has anyone run into this problem and found a solution? Any help would be greatly appreciated.
TJHey, I had the exact same problem. Is your drive an AOpen drive? If so, I read somewhere that their site admits that two of their DVD Rewriter drives do not work with ITunes 6.
You can install old ITunes versions at oldapps.com. However, I installed version 5 and it's now saying I need an upgraded version to play or burn these songs. Let me know if you figure anything out. -
Sync "old" iPod Nano with new version of iTunes
My old computer crashed and I lost iTunes. So I downloaded iTunes 7 on my new computer but now I'm having problems with my nano. When I plug in the nano I can see the songs in iTunes, but I can't do anything with them (delete, etc.) iTunes keeps telling me that my nano is "synced" with another version of iTunes but I don't have that version anymore.
I really hope somebody can help me out with this!Click here and follow the instructions.
(24707) -
I have an old IPID touch and just bought a anew Nano. If I downoload the latest version of Itunes for my Nano, will I lose all of my osns stored in my old version of Itunes and can I still use my Touch (with my current songs on it) with the new version of Itunes? In the past when I downloaded a new version, I lost my songs on my Touch. Thank you for any help any one might offer.
i am no shure but go on Itunes store in shortcuts and try to find 'purchasse'
good luck -
3rd gen iPod Nano will not sync with latest version of iTunes on new laptop. It passes the connectivity test but not the sync test under diagnostics. Worked fine on old Windows 7 laptop but not new one. From Control Panel it shows up as an Apple iPod USB Device...
Never mind, I think. I think I figured it out. There was 1 song (out of > 900!) that somehow had been purchased with the other ID - I have no idea how. Once I deleted that song, it stopped asking.
There may be something with the newest iTunes version too. I didn't think in older versions that the "On this iPod" list of songs was greyed out. But at least it syncs ok. -
Old version of iTunes on laptop won't transfer music to my new iPhone.
Your profile shows you are running Lion (10.7.5). If this is the case, you certainly can sync with a new iPhone. If you are not running Lion, you will need to upgrade to at least Snow Leopard (10.6.8). See below to purchase.
http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard -
I install an old version of itune since the new version does not sync with my iPhone but the old version I installed did not play rather it says that it can't read a file 'itune library .itl' written by Newer version of itune how do I installed this old version to work
You need to restore the pre-upgrade backup of the library file in the manner shown in Empty/corrupt library after upgrade/crash.
tt2
Maybe you are looking for
-
I have an iPad and an iPhone, both registered to same AppleID. Incoming Face time calls ring randomly on one or the other or both (and sometimes none). They should ring on both.
-
Adobe Document Services in 64bit
Hello, Can anyone tell me when Adobe Document Services will be available for the 64bit Windows platform? Any info will be appreciated. Thanks. Brian Vandehey
-
Keeps asking for password - Even though added to key chain
I have my hotmail account configured to my mail. Its asking for the password every time I click check for mail. When I do type the password I click add to keychain and it still asking the next time any suggestions?
-
Hello, I created a tree with a menu. But the menu is not displayed on right click of a node .... Well I can miss something... Anybody have an idea for help me ? Best regards
-
Hi, In one of the standard webdynpro there is an enhancement where a popup window is displayed on clicking the Z button. The functionality is working fine in all system. In the upgraded system there is a dump coming when the Z button is clicked, ther