Problems with Open Format Timeline

HEllo to everybody.
I have a little problem with the open format timeline editing.
I'll try to explain it as clearly as I can.
I'm editing a project which will output as PAL 25 Uncompressed 8-bit, letterboxed, through an Aja LH to IMX tape
I'm editing different formats, PAL 25 and HDV 720p.
I'm now doing the online editing. I used media manager to create an offline project and I'm recapturing my media at high quality.
My timeline settings are PAL 25 Uncompressed 8-bit. I'm recapturing my PAL 25 footage Uncompressed 8-bit and my HD footage via component through the Aja with the setting 720p 50 Uncompressed 8-bit.
On the timeline though, my HD footage shows cropped on both sides. Meanwhile when I open the master clip from the browser it is in his 16:9 aspect ratio.
When I re-edit the clips in the timeline they are no longer cropped but show in their 16:9 aspect ratio.
My question:
is there a way to recapture the clips from my timeline in a way that they already show in their original 16:9 aspect ratio?
Or the only thing to do is to swap all the clips on the timeline with their corresponding master clips in the Browser? The project is an hour and 20 minutes, and the second option is quite time consuming and greatly boring.
I would greatly welcome any suggestion
thank you
nicola

Thanks Tom.
I suspected it might be as I heard it flowing glibly off the narrator's tongue.
Incidentally, your fame is spreading over here.
Last night at our club meeting we were visited by a neighbouring society. One woman happened to mention to someone that she was having problems with FCE 4, so she was directed to me.
I mentioned the ADFs and your name, to which she responded, "I'm working through his book at the moment!"

Similar Messages

  • Error while opening pdf in reader in windows 8:Can't open this file. There's a problem with file format

    I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
    it gives error as "Can't open this file. There's a problem with file format".
    The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??

    This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
    My files have to be compatible not just across readers but across operating systems.
    To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
    I personally test my PDFs using a variety of readers and PDF editors including
    PDF XChange (my favorite)
    Foxit (runner up for me and I recommend for most people)
    Adobe (the bloated monster)
    Nitro 9 (great for moving graphical elements around)
    ABBYY
    And the Nuance PDF Create toolsets
    Those are off the top of my head. There are a bunch on Android that I test with too.
    I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
    Here is what I've learned for my situation
    The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
    all fail using the built-in Windows 8/10 PDF reader.
    When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
    what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
    If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
    A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
    In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
     The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
    I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.

  • HT1338 I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    I have a problem with opening downloaded files from the internet; zip types. Can you tell me an app to open these types of formats of files?

    It should unzip if you double-cick.
    What are you seeing happen when you do that?
    Select a .zip file in the Finder and Get Info (cmd-i). What is set for it to Open With. It should be Archive Utility.

  • Open format timeline problem

    I have about 10 gigs of 720p quicktime files, all encoded with the photo-jpeg option at 95%. I also have around the same amount of 720p quicktime files, encoded with the H 264 codec. When I drag h264 clips into a timeline created with a photo-jpeg clip, it says I have to render the media before playing back in real time. The same goes for the other way around. Maybe I am mistaken, but I thought Final Cut Pro 6 has an open format timeline. I am not even mixing HD and SD, all the files are the same size: 1280 x 720, with square pixel aspect ratio. The only difference is that some are encoded with photo-jpeg, and some are H264. Why do I have to render the other format in my FCP sequences? Right now my only option is to re-render the original clips.
    Because I work with both macs and pcs, my video workflow is a little annoying. I import 1080 60i HDV on a pc, convert to 720p quicktime. I ran out of disk space on my laptop, so I chose h264 for some of the clips, to reduce the size of the files.
    Does FCP 6 not support 2 different video codecs in the same timeline? I am confused, any help is appreciated.

    Thanks for the tip. I found my answer in the manual: Apparently H264 and mp4 are not supported by FCP's Real Time playback engine when used in mixed sequences. Bummer.

  • Problem with opening some of PDFs in Photoshop CS6.

    Hi, I have a problem with opening some of PDFs in Photoshop CS6. It is said: it isn't possible to carry out an order since the module of the file format cannot analyse this file

    Don’t know if Reader has this, too, but in Acrobat one can check under Document Properties.
    I can convert and place the file in Photoshop CS6.
    I would recommend trying the usual trouble-shooting routines and if nothing helps un-installing, running the Cleaner and re-installing Photoshop.  (After making sure all customized presets like Actions, Patterns, Brushes etc. have been saved to s secure location.)
    http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
    Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

  • Problems with open an Indesign-Document over Network

    Hallo,
    we have a specialized problem with opening indesign-documents over network. Our users works with windows-pc (windows7) and adobe CS5 and CS6 and they will use there documents which are on our macserver 4.0 which works on OS X 10.10.2.
    Sometimes the usurers become this Message
    Wouldn't work indesign proberly on windows with documents which are on a macserver?
    Please help me.
    best regards
    chris mueller

    @Naga Sai J – you cannot open an InDesign CS4 file in the previous version.
    But you can export an exchange file format for InDesign CS3.
    Go to File/Export and chose INX for export: "InDesign CS3 Interchange-Format (INX)"
    That .inx file could be opened with InDesign CS3.
    After opening the .inx file, examine it well!
    Some things might have changed (things regarding to newer or changed features from InDesign CS4).
    Uwe

  • Problem with date format when ask prompt web-intelligence

    Bo XIR2 with 5 SP. Instaled on Windows 2003 with support Russian.
    Inside BO every labels, buttons - use russian. But when invoke web-report and Prompt appear there is problem with date format.
    Looks like korean format of date 'jj.nn.aaa H:mm:ss'.  I see system settings of date in Win .. everything right
    What i have to do?
    Where i can change format date for bo?

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with Date format

    Got one more problem Merilyn and Radhakrishnan...
    Regarding the soln y provided me earler with the thread "Problem with date format"...
    What is happening is....I am able to change the 2400 to 0000 but when it is changed from 2400 on jan 1st to 0000 the hour is changing but not the date....the date still remains as jan 1st instead of jan 2nd....
    Eg: Jan 1st 2400 -- changed to -- jan1st 0000
    instead of jan 2nd 0000
    Could you please help me in this issue...
    Thanks,
    GK

    GK, try this...
    decode(instr(packagename.functionname(param1 ,param2),'2400'), 0, to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" hh24mi'),'mm/dd/yyyy hh24mi'),'mm/dd/yyyy hh24mi'),
                                                                      to_date(to_char(to_date(rtrim(packagename.functionname(param1 ,param2),'(PT)'), 'Month dd, yyyy "at" "2400"')+1,'mm/dd/yyyy "0000"'),'mm/dd/yyyy "0000"'))-Marilyn

  • Problem with date format dd/mm/yyyy. But I need to convert yyyy-mm-dd.

    Dear friends,
    I have the problem with date format. I receiving the date with the format dd/mm/yyyy. But I can upload to MySQL only in the format of yyyy-mm-dd.
    how should I handle this situation, for this I've created these code lines.But I have some problem with these line. please help me to solve this problem.
    String pattern = "yyyy-mm-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("2006-02-12");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I need the date format in yyyy-mm-dd.
    regards,
    maza
    thanks in advance.

    Thanks Dear BalusC,
    I tried with this,
    rs.getString("DATA_SCAD1")// where the source from .xls files
    String pattern = "yyyy-MM-dd";
    SimpleDateFormat format = new SimpleDateFormat(pattern);
    try {
    Date date = format.parse("DATA_SCAD1");
    System.out.println(date);
    } catch (ParseException e) {
    e.printStackTrace();
    System.out.println(format.format(new Date()));
    this out put gives me Tue Apr 03 00:00:00 IST 2007
    But I want to display the date format in yyyy-mm-dd.
    regards,
    maza

  • A Problem with Region Format Settings

    Hi!
    I have a peculiar problem with Region Format settings on my iPod touch (Settings > General > International > Region Format). It appears that iPod touch can support more region formats than it is stated on that list. Once I registered my iPod, I selected my location, Lithuania, and it automatically set (I think because of this action, and not another, like my PC settings) Region Format to Lithuanian. Although it is nonexistent on the menu list! Good news!
    However, the problem is that while I explored my iPod I accidentally checked another region, and there is no "cancel" option. So my region switched to another. And now I am not able to switch it back to Lithuanian again because there is no such selection (reset or restore didn't help).
    Has anybody any suggestions how could I return to my preferred region format (Lithuanian)? Thanks!

    thats interesting. I think the ipod took those settings from your computer/mac.
    anyway, shouldn't there be something near you that has the same region format settings? maybe you can just use something that's exactly the same.
    and btw: some of the regions have arrows next to them which brings you to subregions of that region. maybe you should check that out?
    otherwise ... well ... I think only a restore would bring back the original settings.

  • Problem with opening of PDF in my webmail application

    I have a problem with opening a pdf file in my webmail application of my internet provider in apple safari since yesterday. When I wanted to open up a pdf file I got a pop up message to allow a connection between adobe and the webmail application which I did. Since then I can not open up a pdf file. If I go to another browser or if I use email from another internet provider I use too it works and I can open up. It seems to be a blockage of the specific combination of this webmail application and safari.
    What can I do ?

    Hi,
    I have same requirement.
    I need to cnvert smartform->pdf->send mail.
    The mail is send but the attachment is corrupted.
    Can you tell me what code you have written so its working in developement?

  • Problem with opening a indd file in CC 2014.

    When I'm trying to open a 5.5 .indd-file in CC 2014 on my Windows computer, I get this error message: 'Either the file does not exist or you do not have permission to open it or the file is used by another program'. However my collague has no problem with opening the document on his Mac computer. I guess it has something to do with a kind of setting in my CC 2014. Can anyone help me?

    Nothing to do with ID. It really means what it says - your file permissions are hosed and it being an ID file this could include things like fonts or placed images referenced within it.
    Mylenium

  • F-32 : Problem with Open Item selection

    Hi,
    We have a strange problem with open Item selection for customer clearing in t-code F-32
    In My QA system
    if I input spl GL indicator ="*" and uncheck Normal OI tick,
    the system selects all open items,
    (those with spl GL indicator and those without spl GL indicator)
    In My Dev system
    If I input spl GL indicator ="*" and uncheck Normal OI tick
    the system does not select any open items,
    Please let me know which setting controls this behaviour ?
    Regards
    Sachin

    Hello,
    Check your data in FBL5N for the option "Special GL Transactions". There could be that there is no data in the system with SPECIAL GL TRANSACTIONS.
    In F-32, there is no value like *
    You need to input right Special GL Indicator. "*" will not work here.
    I am sure in both the systems if you put "*" and UNTICK your normal transaction, you will NOT get any items to clear.
    Please DOUBLE CHECK whether you have unticked normal transaction.
    Regards,
    Ravi

  • The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what ca

    The last time you opened OpenOffice, it unexpectedly quit while reopening windows. Do you want to try to reopen its windows again? i have a problem with open office, if I press reopen, nothing happened  ans i see always this information on my mac? what can I do?

    Please follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in 10.8 there is only one. If you're running a version older than 10.8, this comment isn't applicable.
    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Containers/com.apple.mail
    Right-click or control-click the highlighted line and select
    Services ▹ Reveal
    from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
    Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
    ~/Library/Containers/com.apple.MailServiceAgent
    Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.

  • S_ALR_87012309 PROBLEM WITH OPENING BALANCES

    Dear Experts,
    My client having problem with opening balances in cash journal report that same showing in INR but not tallyed with carryforward balances. Cash journal carryforawd balances and FS10N balances are tallyed.
    So,please any suggestion to solve that error.
    Best Rgds
    Suma

    It is problem with carryforward balances from one year to another year. We have again run the same programe carryforward programe to fix this problem.

Maybe you are looking for